another great video in George's worldwide educational videos. I hope to meet him someday
@josephr30394 жыл бұрын
Have you ever done a malt extract in a sugar wash to make whiskeys? If not would you ever do a video of pros and cons.
@josephr30394 жыл бұрын
@morse who's that?
@prometheus49164 жыл бұрын
Thank you George
@stillworksandbrewing4 жыл бұрын
great vid George happy distilling from Still Works and Brewing
@DanielRosa-wj5fc4 жыл бұрын
Okay, that's why my first batch was funky and everything else was so good. Sacrificial run.
@georgecolby74884 жыл бұрын
Another great one George. Just sayin' hi and putting a like on the video.
@captainmidnite934 жыл бұрын
Oh man o man where can i get that parody table of beer elements you used in the intro?!!
@BarleyandHopsBrewing4 жыл бұрын
send an email and I will send you a copy
@anthonyrossmaund31612 жыл бұрын
Happy distilling
@U812GREEN4 жыл бұрын
Don't worry about the water in the grains the sparge will get the sugars you want and leaves clean water behind. ABV dilution and anal cleanliness is only important when your brewing beer because it's still alive when bottled
@brutta1564 жыл бұрын
Hi George again a great video thank you for the very clear video you are so helpfull to get thing right and be happy distilling :-) thanks from the Netherlands and happy distilling Don
@jimbaritone64292 жыл бұрын
HAPPY DISTILLING! Squeezing the boiled bag: Years ago, I lived near a big Italian grocery. Every year they imported grapes for wine-making. Most customers were "regulars," & the store had a screw-type grape press they'd loan out for a day. Years later, a buddy got hooked on beer making & wanted a grain bag press. Very pricey. BUT! One Saturday, I went into Princess Auto (Canada's version of Harbor Freight) and by the door was a stack of 2-ton screw-type scissor jacks for cars, brand new, $12 on sale. Hmmm - 2 tons. We built a frame from angle iron, a pressure plate from layered 2x4's, and a "barrel" with slats of 1x4 lumber ripped in half and stood on end, held by 2 rings of 1/4" wire rope, cable clamps, and big staples. It sat in a big plastic vat, and it worked: put a wet grain bag in, turn the jack screw, which squeezed the bag, & the trapped water flowed into the plastic vat. $20 bucks of materials, & 2-3 hours to build. Still squeezing 18 years on.
@jbrunson19494 жыл бұрын
As you said with stainless steel , cleaning not much needed,, but if you are doing this with copper and only run say every other month,, you need to run some sort of cleaning sacrificial run ,,, the inside of copper will tarnish after a few weeks and become a greenish color,, there fore you need to do a good cleaning or the end result will have a tinted color to it, if you are running every week, probably not needed,, You have said in the past that you didn't know exactly where the sacrificial run developed,, my guess is ,,, those Shine maker of old that did not produce all year,, because of many reasons,, no abundance of grain out of season ,, and temp of site for mash fermentation ,, probably caused stills to set up for months at a time,, and in order to clean the still and remove any tarnish from inter parts,, a sacrificial run was probably the easiest way to clean it,, things like citric acid were not as common as today. Just my thinking on the cleaning of copper.
@ciggityliggity70394 жыл бұрын
Just so you know who I am Goerge I just talked to you I really appreciate what you do.
@chuckdontknowdoya61004 жыл бұрын
When doing my grain batches I usually use twenty gallon drums and ferment on the grain with head space I wind up with a little over 18 gallons. Now the tip for this size batch as I cook my corn I add two cups of corn starch this boost my ABV without messing with my flavor profile at all. In fact next time I'm going to try adding four cups per batch and see how that works of course I will post my results here.
@justinsgarage11252 жыл бұрын
Interesting. I thought about this as well since it’s starch and it’s dirt cheap. Would just need to convert it but it theoretically it should work!
@ryanlinder19734 жыл бұрын
I did my cleaning and sacrificial run yesterday with my 50 gallon pot.
@kycanoecamper4 жыл бұрын
Pics Please!
@ciggityliggity70394 жыл бұрын
So I wasn’t get much alcohol on my mashes and was so frustrated and the fix was I was using an aluminum pot for cooking the mash. I switched to a stainless pot and 6 row boom fixed! Bubbling like mad now!
@chuckdontknowdoya61004 жыл бұрын
Happy Stillin Tip 2 as I wander around KZbin and see people teaching unsafe, dangerous, and down right dumbass ways to do our thing I alway post Barley and Hops Brewing in the comment section and tell people to come learn the right safe way with George.
@venusitapealava70354 жыл бұрын
Chuck Don't know do ya I do too 😂
@maximumfatdan4 жыл бұрын
Happy distilling. Thank you for the content you create. I can't even begin to think about how much trial and error time you have saved me with just starting out with this. I'm grateful that I found your channel to help me understand this awesome hobby.
@johnnytoy5487 Жыл бұрын
HAPPY DISTILLING 👍 I enjoy making spirit's. I watch your videos while I'm distilling, though I don't / can't consume alcohol. ( health reasons ) I've never sold as much as a drop, but my friend love it when I bring a jug with me. Again, HAPPY DISTILLING 👍
@rafer20024 жыл бұрын
So you saying no need for a 5 page letter just to ask what's your favourite yeast to use. lol
@chuckdontknowdoya61004 жыл бұрын
George would love to see a video on spp spiral prismatic packing how to size it what the best size to use and what you think about making your own. Thanks for all of your help.
@marknichols58274 жыл бұрын
I like the mop bucket idea George. I've been using brew bags squished in my friends fruit press, you get every last drop
@justicebruno5249 Жыл бұрын
Really been enjoying the malt process. And started my Cannashine. Seems to work very well. Many thanks for all the help. Godbless
@neutralgod3004 жыл бұрын
3:12, I just finished soldering my copper pipe and I don't have any 551 + the store is about 1 1/2 hrs. 1 can of 6oz into 5 gallons of water, if I boil it? or if I use vinegar? how much per gallons? Do you think it would do a good job as a 551? Would it cleans it or gums it inside the pipes? or anything from my household? anyone? thank you
@raimonstappat35414 жыл бұрын
Using a fruitpress with a bag in it, is also a good handy way to press out the liquid from the grain. And you can also rinse perfect threw it before pressing ...Happy Distilling..🙃🤞
@justicebruno5249 Жыл бұрын
I gotta look that one up. Thanks
@wldtrky384 жыл бұрын
Hello George, and HAPPY DISTILLING! Another channel I watch, different subject matter, the guy has a saying. I've found it applies to many areas of life. "Common Sense IS a SUPERPOWER" No disrespect meant to any fellow distillers. A can of tomato paste comes to mind 😁 Thanks for all your efforts George👍👍 And GO CHIEFS !!!
@justicebruno5249 Жыл бұрын
Mop bucket! Hahaha heck yes. Been using big strainer.😁
@mikew.19024 жыл бұрын
Another great video. Do you ever sleep???
@garrymcgaw47454 жыл бұрын
I's thinking that very same thing Mike...lol, he reminds me of the bunny with the 'Every ready' batteries in it.... He's definitly my Go to Man.. H D.
@OSCARE382 жыл бұрын
Mop bucket 🪣👍🙏 so simple !wish i had thought of it
@whyyoutalkingtome2 жыл бұрын
George, are you still building 220v pids?
@douglasnapier54272 жыл бұрын
My stainless still gets a trip to the dishwasher...just don't tell my wife!
@almead662 жыл бұрын
Mop bucket... of course! Mind. Blown.
@Holodeck14 жыл бұрын
Happy distilling! I appreciate you, George.
@tobinwalton95924 жыл бұрын
A mop bucket! Why didn’t I think of that?!? Here I am trying to invent or think of some device that could squeeze a hot grain bag & capture all the liquid 🤣 Genius, thank you!
@BETTERTOMARROW4 жыл бұрын
Hope your ok ... must be busy..
@BarleyandHopsBrewing4 жыл бұрын
Very
@JesusisJesus4 жыл бұрын
Happy Distillin’ - George, not that I’m incapable of doing metric conversions in my head, but could you please give us both units if possible. 1.25 pounds is about 550 grams per 3.8 litres is 145g/litre Incidentally, 9 kilos of dextrose will fill a 25lt fermentation keg to the 13 litre mark, so I’ve just marked my fermenters at 13lt and pour it straight out of the bag, then top it off to 25lt and chuck in my turbo yeast. That’s just my method I’ve found to be easiest. Thanks for everything you do, I have learned literally everything from you, the local brew shop and trial & error experience.
@bladecjizal2 жыл бұрын
Hey George another great video one question do you need to do a sacrificial run on a stainless steal still ??
@kycanoecamper4 жыл бұрын
happy distilling. What's the episode talks about "5-5-1"?
@ensteele1203494 жыл бұрын
Link: kzbin.info/www/bejne/nH-tl4GXg5yAn6s and at 11:40 on video. Title is Cleaning Copper the Easy Way.
@toddlenz36172 жыл бұрын
If you do a vinagur do you still need to do a Sacrifice run
@5roundsrapid2634 жыл бұрын
Good point. It’s not like making wine or beer. It doesn’t matter if it smells funky, it probably won’t carry over.
@GooTimo4 жыл бұрын
Is no one going to mention how amazing the thumbnail is?
@jeremyjarvis33684 жыл бұрын
3 more happy distilling tips
@darrinmcgann4 жыл бұрын
I always hit that 👍 before I even watch George's videos! Happy Distilling!
@Ordog2134 жыл бұрын
I use Bakers Malt here in Austria to get my enzymes. It is cleaner that most brewing malts and is like Flour. Good stuff...
@normheagle89974 жыл бұрын
Good talking with you the other day George. Thanks. When I was getting ready for my first whiskey I asked for suggestions. The boiler is 7.5 US gals. I was sort of thinking two slightly different batches that might then be blended. I posted, on the homedistiller forum, the ingredients that I had purchased. This what I had on hand Maris Otter 2.2 kg Heavy Peated Malt 3 kg Pale Malt (Canadian 2-row) 5 kg TF Chocolate Malt 1 kg Special Belgium 1 kg This response came back... That’ll get you roughly 12-1/2 (+/-) US gallons of wort. Give it a go. The peated malt will be slight in the finished beer and likely not noticeable in the distillate. But the darker and specialty malts will give you a complex grain flavor offstill. The 12-1/2 US gallons of beer will give you roughly 3 strip runs through your still, which when you collect the low wines so the average is 30%, or so, will yield a whiskey suited for the aging cask after your spirit run. It should be a great keeper. And it was.
@chuckdontknowdoya61004 жыл бұрын
Great information from beginning to end thank you sir and keep them coming congratulations I see your about to break 55k. Happy stillin George
@silver-hy6mi4 жыл бұрын
Oh how so true! Squeeze the very last drop! I started doing that, then I woke up to my self! Don’t do it anymore!
@gtothepowerof64 жыл бұрын
Thank you so much I enjoy you videos.
@frank644094 жыл бұрын
As always George, great information.
@glenna34344 жыл бұрын
Happy Distilling George!
@mikebullard17974 жыл бұрын
Happiness is Distilling! Is the sweet wash supposed to be sweet in the jar? After being distilled? I'm not complaining, my first run taste awesome! Just dumbfounded that its sweet tasting. Thanks in advance George,
@BarleyandHopsBrewing4 жыл бұрын
Residual sugars that were not fermented came across during distilling. Nothing to worry about.
@mikebullard17974 жыл бұрын
Kewl. Had it the garage and it got cold, but it's allgood asfarasim concerned. Still have 8 gls left to cook up. Wutz the difference between a sacchrometer, and a hydrometer? If you will?
@davidb95474 жыл бұрын
Happy Distilling
@prometheus49164 жыл бұрын
George Can you still get stills
@BarleyandHopsBrewing4 жыл бұрын
No retail at all
@andywhf82494 жыл бұрын
Happy distilling George. You made a good point there about 5percent and 10 percent but with more water , I have made a 50L still and was worried that the heater element might get exposed when do 15 or 20L washes ... so would it be ok to just top up with water to level I know will be fine ? I know it will take a bit longer to run but that same amount of alcohol is there surely
@jeetkhumbongmayum3984 жыл бұрын
Thanks George for sharing your enormous knowledge and experience . I'm a new comer 👍
@the_whiskeyshaman4 жыл бұрын
Love it. Flaked maize is a pain but if you get enough water it’ll work out.
@thomasreeves154 жыл бұрын
I must be a fan I looked at this vid then went back to doing paperwork. I heard an echo. Its playing on my phone and computer too that'll never happen again haha
@footloosecamping46994 жыл бұрын
Once again “Thank you George Happy distilling”
@adamwanderscheid85594 жыл бұрын
Another great video! Thanks George.
@anthonyburkett21464 жыл бұрын
Happy Distilling, George!~ I must have missed something... :-( I have a solid copper Alembic still... and I typically clean it using a 30% household vinegar and water. However, I do not know what you're referring to wrt "5/5/1"... Please educate me.
@BarleyandHopsBrewing4 жыл бұрын
I have a video on a mixture that cleans copper. Check it out kzbin.info/www/bejne/kGfaZKBvl6dpf9U
@mattsadlier93714 жыл бұрын
Thanks George for all...
@Capoeiristadiogo4 жыл бұрын
Hi George, I sent a message and needed help regarding the yellow balls that came with my Chinese still....what are they for and are they safe to add during the distillation process....Please help??!!
@BarleyandHopsBrewing4 жыл бұрын
They are just like raching rings or any other substance added to increase the surface area. They are safe to add
@theomnipresent14 жыл бұрын
Love these tip videos.
@DotanBrand4 жыл бұрын
Which video was about 551?
@heymulen18404 жыл бұрын
Hey, at the end of this video: kzbin.info/www/bejne/nH-tl4GXg5yAn6s Another great video from George the happy destiller :-)
@davidrogers62624 жыл бұрын
Happy Distilling! After taking your advice of recirculating the sparge water a couple times, I achieved my best efficiency ever! 11 lbs of grain in 5 gallons got me 1.060! 7 lbs of maized corn! I let it sit for a good hour to hydrolyze and a little help from powdered amylaze and cut down on the viscocity followed by distillers malt and flavored malts to achieve my highest potential AVB to date! It ought to be fantastic beer! Lol 😂.Thank you for all those helpful hints that make my brewing day go smoothly. Keep up the great work!