Eachine E011 Best Value Tiny Whoop mini inducted fan quad FPV Mod Compare to E010 Full Review

[@mihailvasilev877]

You have to try E010 with Racerstar 615 6x15mm 59000RPM black motors ... different sound, different feel, its like a pro mode, like butter!!! :O it smashes E011

[@rickbrasche8781]

I wish I'd seen this earlier before buying two e013s and still having to get a e011 and swap the camera from a broken e013 anyway. even the 013's canopy fit on the e011. Now to get it to let me use the slightly better radio of the e013. Looks like a crystal swap time?

[@TiggersRCReviewsTTFN]

Sounds like you are sorting it well, good luck

[@Harel-DIY]

Does the radio works on the 011 ?

[@HowToDIYRc]

NIce review mate very good vid added to playlist keep up the great work :D

[@scottrostad5021]

Got my Taranis QX7 bound with the Eachine E011... Works fantastic! I need more props! ***Can I use the E010 props on the E011 quad?*** The E010 props are in stock in USA, where the E011 props have to come from China. Thanks for answering this! I figured since you have both quads you'd be the one to know! Love your reviews - my favorites from all others! So thorough and complete! Keep up the good work! 😀

[@TiggersRCReviewsTTFN]

Nice, that would make it a whole lot better flying experience :-) I don't have a Taranis TX.....maybe I should get one....tell the missus they sent one for review ;-) Yep props are identical as far as I remember, my friends son has the E010. Thanks for your comment, TTFN

[@scottrostad5021]

Thanks for the quick reply! Here's the link for the Multiprotocol module: us.banggood.com/Wholesale-Warehouse-Multiprotocol-TX-Module-For-Frsky-X9D-X9D-Plus-X12S-Flysky-TH9X-Transmitter-wp-Usa-1097688.html It's super cheap too. When you get to the bottom of the Banggood link, right after the Binding instructions, you'll see a little red link "Click Here". That will take you to a .pdf of all of the brands of quads you can bind to. It's quite extensive. So, if you don't have a transmitter that will work with this module, it sure might be worth getting one! It says it works with FlySky too...don't know what transmitter you use but check it out, maybe it will work with yours! :)

[@scottrostad5021]

Oh, one more question... I have watched your review on the Aosenma CG035 a few times and bought one because of your comments and especially the flips, rolls, and acrobatics you put it through after you stripped it down and went full manual with it. Some amazing flying my friend!! LOL So, with this multiprotocol module I linked above...Do you think it is possible to get the CG035 to work with my QX7 TX? Please check out that .pdf and see if you can figure out what protocol might work with it, Ok? Thanks again!!!

[@jandomingo9806]

Scott Rostad cant wait for my qx7 👍

[@adminmovie]

what are the flight times?

[@pamithuanusara5404]

I can't find a way to buy this now Somebody help me please

[@DRONERC33]

nice video let me ask when you soldering power cable to the board you did red to positive on the flight controller and black to the negative on the flight controller?

[@TiggersRCReviewsTTFN]

Glad you enjoyed it. Yes on the soldering ;-)

[@vincebrizio953]

Hi, I am Vince Brizio ! I want to buy a cheap Transmitter for my eachine E011( I hate the little TX ) .Please tell me which one is compatible? the X5C-14, BAYANGTOYS X16, devo 4 ? Do you have a suggest for me ? I have a Spaktrum DX8, sorry not a Taranis !! Thanks

[@TiggersRCReviewsTTFN]

I don't know of any other compatible TX, I have tried mine but no good :-(

[@mightyjfeet9628]

Vince brizio try FLySky I6

[@scottrostad5021]

Great review, like always! The big weak point of this quad, and most toy grade quads, is of course the transmitter. Can you please do a video on how to bind this quad to a Taranis QX7? I bought the module for about 10 bucks for the back of the QX7 to have it work with many toy grade quads... Just need to know how to bind it. I think it would be very popular and helpful. I can't find any information anywhere on how to bind the E011. Thanks much!

[@TiggersRCReviewsTTFN]

Hi Scott, glad you enjoyed the review and yep the TX is a pain compared to hobby grade one. I don't have a Taranis so I can't help and would love to have this set-up on one would be great. Hope you get it sorted, cheers and happy flying

[@gdhall5311]

TRC, other than the size of the battery, I don't see that much of a difference between the two. I have the 010 and this one seems to fly about the same. I would prefer like you said to put a fpv camera on top instead of a toy figure. Good review though.

[@TiggersRCReviewsTTFN]

It does perform better IMHO larger motors and new PDB, but I wouldn't replace it for the sake of it. The E010 is still awesome but if you were after a replacement or buying your first one I would choose this over the E010. Glad you enjoyed the review and valid comment ;-)

[@RonaldBrown59]

I have the JJRC H36 and it's very similar to this quad. And it's a great value for the money.

[@TiggersRCReviewsTTFN]

Yep I have one too, they are all pretty awesome for the money :-)

[@eesaakarolia5756]

What's better e010 or fq777

[@AsgardStudios]

Great review and comparison and stunning garden!

[@LawrenceLawHK]

Nice video! Well done and subscribed!~ newbie questions, how do you get it to manually flip (at 18'45 of the video)? and are the motors of e010 and e011 interchangeable between the frames? (I have a few H36/E010 and would like to reuse the parts as much as I can)

[@TiggersRCReviewsTTFN]

Thanks, here is a video on manual flipping kzbin.info/www/bejne/Y33ZaYlura-Ce9k moptors are different between models, happy fun flying :-)

[@rk-rc6045]

really enjoy your reviews, always very informative, question for you: I soldered a plug-in on my furibee f36, much like you have. i'm using a tx03 vtx cam but when I fly, as soon as the rpms get to high on my quad I get really bad static on my jjrc pro fpv goggles ? I can fly low and slow and get a decent picture but as soon as i try to gain altitude or speed I get nothing but (snow) ? any ideas ?

[@TiggersRCReviewsTTFN]

Glad you are enjoying the channel, would check solder joints, just wonder if you are getting a slight break down under load, just a thought. Not come across that so can't really help, hope you get it sorted and if I think of anything else will let you know, cheers

[@rk-rc6045]

yes it has me stumped? thanks 1 more thought, what is the output of the lipo's you use?

[@TiggersRCReviewsTTFN]

260MAh but I have the 240MAh five pack on order goo.gl/ZW2gca let me know if you sort it, have a good flying weekend :-)

[@MiniMattTV]

6g is quite a lot actually. I got another that you recommended recently that was 3.5g

[@storm3016]

Well, I don't seem to have a lot of luck with these cheap brushed-motored quads. First there was the E59 that didn't want to fly, then I broke the frame of my iDrone i3s on the first flight and now I received an E011 with a faulty battery! Them Chinese could sure do with a little more QC. But luckily I got it to work with my iDrone batteries (I ordered extra batteries for the E011 but Banggood didn't want to send them to me, so I had to be creative) and the quad itself is a lot of fun! This will tie me over when the weather is too gnarly to fly the beloved Bugs 3. Now should I just order a few more iDrone batteries, or should I try getting some from Gearbest that are actually meant to go with the E011? Cheers!

[@TiggersRCReviewsTTFN]

Sorry to hear your problems mate, hopefully all behind you now ;-) Yes I've had problems that Banggood wont send batteries only to UK :-( I'd go for E011 ones but if you sorted others to fit, personally I would go for whatever is cheaper or can be used on more quads ;-) Hope that helps, TBH you can never have enough batteries, good luck

[@storm3016]

It's kinda odd because they did send me some spare Bugs 3 bats yet say they can't ship the E011 ones to my country, but what do you do. I think I'll try ordering some from GB instead though. The bigger ones for the iDrone do work even though they have a different connector, but they are a bit heavier and I want to try an FPV camera on it as well soon which will probably make everything together too heavy to still fly well. Cheers!

[@TiggersRCReviewsTTFN]

Yes that is weird I tried ordering with other stuff, thinking that would get around it, but they just divided the order with the batteries on a separate shipment and then cancelled that order :-( Think it will be getting a bit on the heavy side, but some VTX only weigh in at 3g ;-) good luck mate

[@storm3016]

Haha, I actually tried to convince them that it was rubbish that they couldn't send 'm and that they should just go ahead and send them to me since they'd already send me some other batteries, but they would have non of it :) I haven't even checked weights yet on those little cams, I was purely going on image quality when comparing them. But I'll look in to that, thanks again!

[@dylanmackintosh3084]

What fun flying inside chasing the wife or outside in the garden(chasing her there also) so small but easy to fly!!!!!!

[@TiggersRCReviewsTTFN]

Yep great fun quad and with FPV whatever you are chasing doesn't stand a chance LOL

[@jacobdevries4113]

Quick question does the props use 1mm shaft?

[@TiggersRCReviewsTTFN]

Prop shaft is .8mm diameter

[@josephaerialphotography6734]

Hi nice video, excellent detail explaining on your 👍i ordered the E012 have you tested one of them? Or anyone on this page? Most of all what extra battery's do you recommend with more running time and more C rate? Again any sort of support will be appreciated 👍happy flying

[@TiggersRCReviewsTTFN]

Yep done it here kzbin.info/www/bejne/fXyaoJZtmceho8k and compare to e011 ;-) As for battery, if you are looking to get a load more power I would be looking at brushless micro racers, don't think this could handle much bigger or powerful battery, that's just my opinion, I would just get more stock ones and enjoy the flights ;-)

[@pumplover118]

can you use the e011 battery with the e010?

[@TiggersRCReviewsTTFN]

Yep will give you longer flights ;-)

[@pumplover118]

Ok, thank you.

[@toddmummert4853]

How do you get that stuff to fit

[@jandomingo9806]

the cam you used is very heavy. you should have used ef02 or cm275t 3.3g-3.8g

[@TiggersRCReviewsTTFN]

I just used what I have and worked fine for me, but may look at the lighter ones if I need a replacement, losing weight always a nice thing ;-) cheers

[@ryancaindoc8903]

hey i have a question is the propeler same to the e010?

[@Phrancis5]

I have both quads and they're the same props...

[@tanboi1105]

better than furibee f36?

[@TiggersRCReviewsTTFN]

Neither is really better, that's why I have both ;-)

[@tomkowalsky]

LOL. It's DUCTED FAN not inducted. Unless you are inducting it into the quad hall of fame.

[@TiggersRCReviewsTTFN]

Damn it 12,500 views, thought I got away with it, well spotted you win the prize LOL :-)

[@tomkowalsky]

There is nothing hidden that will not be revealed. LOL. Great videos brother. Fun to watch

[@TiggersRCReviewsTTFN]

Cheers Tom more errors for you to spot on the way, you are like a copywriter for the channel LOL Happy New Year bro

[@thijss1272]

nice review! i got this one on the way aswell :)

[@TiggersRCReviewsTTFN]

Thank you, you'll love it awesome fun for little cash...just the way we like it, cheers :-)

[@thijss1272]

Yes also got a lighter fpv set😉

[@topdog0671]

I think the guy on the quad is concentrating

[@TiggersRCReviewsTTFN]

Yep that's what all defenders of quadreverse do in battle ;-) TTFN

[@prime-eight]

That controller is what kills it for me. I don't want to lug around my bigger radio but I also don't want arthritis from that little thing. C'mon Eachine... make it at least playstation sized.

[@TiggersRCReviewsTTFN]

With you on that one ;-)

[@mikelewis2269]

I didn't think I'd like the Furibee F36 controller, but it seems to work in my medium sized hands just fine. I got some Eachine stick extenders and those help. m.banggood.com/FQ777-124-Pocket-Drone-Spare-Parts-Two-RC-Sticks-p-1000313.html?rmmds=search

[@mikelewis2269]

The Eachine stick extenders fit loosely on the Furibee controller. I attached them with rubber cement. I put broken off bits of Q-Tip shaft inside the extender so it extended as far as possible.

[@robertbull]

Nice video bro

[@TiggersRCReviewsTTFN]

Thanks and a great fun quad, cheers

[@DRONERC33]

cool thanks

[@DRONERC33]

thanks a lot

[@TiggersRCReviewsTTFN]

Pleasure :-)

[@noleftturnunstoned]

Avoid Banggood like the plague! They sent me a cancelled order, and then denied I cancelled it. Now I have to pay almost the whole cost of the shipment to return it. Terrible customer service,

[@gbro8822]

For $18 bucks US, that's nuts. lol

[@TiggersRCReviewsTTFN]

and DAMN good fun :-)