Gold Leaf Practice Session

Buy the Paint and Supplies you need Here👇
www.amazon.com/shop/influence...
LiME LiNE paint supplies 👇
limeline.bigcartel.com
Hey guys,I’m tring out some new gold Leafing techniques along with some new spraysble Sizing glue.
Join this channel to get access to perks:
/ @timewarpcustompaint
Thanks for watching. Hit me up in the comments if you have Questions and don't forget to hit the like and subscribe button 😉
Be sure to check out my other custom paint tutorials.
follow me on these fine social media outlets.
Instagram : @timewarpcustompaint
Tik Tok: @timewarpcustompaint

[@jasonshortphd]

I appreciate your honestly in your commentary. I have only been attempting to paint for about a year. I have been buying wrecked motorcycles and fixing them as a hobby, then I donate them to veterans charities. This winter I decided to try to custom paint a tank and fenders on an Indian Scout. I am learning a TON and really enjoying a new challenge, your channel has been super helpful.

[@TimeWarpCustomPaint]

You can do it!

[@ChannelingJohnBonham]

If I can add an old school tip, you can add a little bronzing powder in your glue that won't affect the leaf, but you'll be able to see where you sprayed the glue.

[@grendelum]

a cork with some toothpaste on the end makes wonderful swirls in leaf

[@SavetheRepublic]

Love your videos man. I'm a visual learner so being able to watch you go through the steps and explain is awesome.

[@TimeWarpCustomPaint]

Thank you I appreciate you watching!! 👊

[@ianduncan4143]

This is one great programme

[@MadDonJuan]

This is great tutorial, ive never knew how it was done.thanks for sharing. Im a very quick visual learner, I think I can do this now, thanks.🤙🏽

[@btdcustoms9330]

I've been painting on and off for 15yrs, recently got into pin stripe and leaf. I'd agree leafing is one of the most delicate and tricky effects... I live your videos, thanks for making them.

[@TimeWarpCustomPaint]

Thanks I appreciate the support

[@michaelkennedy2190]

Hey Adam thanks for another amazing tutorial.

[@Lucascalcena]

I've had the same issues, i have to keep practicing to get it dialed in. love the videos!

[@stevecourtneyscalekustomz2602]

Looks good

[@4200timeB]

Very good stuff to watch an learn with . thanks man

[@TimeWarpCustomPaint]

I appreciate you 🙌thanks for watching

[@justinturner4850]

I live in Hawaii so I wasn’t awake in time for this but I watch your videos very carefully. And I hope I’m in time for the next live stream🤙

[@goranbalkebo1603]

Like yours mc gastanks you do i my self do some gastanks in candy paint i like yor work i look att you at KZbin all the time for iders tanks from sweden Helsingborg

[@troytaylor1913]

Except for airbrushing leather and fabric for about 5 years, I've never painted graphics on a hard surface. I think I'll practice on a piece of glass that way it can be cleaned off easily with a blade so I can practice again. I'll probably try it on bottles to figure out how to spin it on tubing. I'll probably end up experimenting like I did with my leather. I'll be trying some sizing on a pinstripe brush for sure.🖌

[@TimeWarpCustomPaint]

Awesome

[@victorruiz6930]

Shout out from chicago love yo work mad respect man 💯💯💯

[@ronjon5386]

I got everything about a week ago. I have yet to get all of them right. It’s 50 /50. I need practice for sure. Good thing the good is cheap

[@TimeWarpCustomPaint]

Yep 50-50 with water on the sizing glue make sure you spray it lightly so it doesn’t beat up and create a texture

[@harrykidder4428]

Great video, sorry I missed the live.

[@ronjon5386]

I know this is old dry times from other videos are about 3 minutes at times and the leaf comes cut. Great product

[@TimeWarpCustomPaint]

Yep super fast thanks for

[@brianreineke5831]

You don’t have to scuff the paint for the sizing to stick to the paint better?

[@junepetr3481]

Is the brand of leaf listed on your Amazon site the one you like the best?

[@TimeWarpCustomPaint]

Unfortunately not I’m still testing it. Most likely next month

[@user-fu1nd2cn2p]

Is it 23K gold leaf?DIY enthusiasts from China ^_^

[@taterstoolboxskates]

I just chimed in an hour late but the volume sounds good brother👍😎

[@TimeWarpCustomPaint]

Awesome brother👊 thanks for watching!!

[@user-gr8zx4rr5x]

Greetings, if I may, where can I get the roller or who makes it, please

[@ArtDaBarber619]

Can leafing be engine turned the following day or what is the time frame to turn the leaf & "why". Thanx in advance 👌🏽

[@TimeWarpCustomPaint]

It’s better to spin right after. I’m not sure why.

[@themaxwell5024]

Man you are the SH**. Your work is awesome. I hope that i am as good as you some day. But… i need to know when the roller and duster is going to be back in stack. I NEED THEM lol

[@TimeWarpCustomPaint]

Thanks hopefully next month

[@mortenhansen3455]

May I suggest that, when you use the roller to hug it tighter. Consider using a piece of the paper the gold came on.. Just a suggestion. Other than that. GREAT videoes! You have an awesome talent!

[@TimeWarpCustomPaint]

I’ll have to try that!! good thinking 👌

[@mortenhansen3455]

@@TimeWarpCustomPaint More cleanly written, just ue the paper as a layer in between. Paper will scratch theheck out of the gold. But paper as a between sheet and then roll. Gold and siler is so thin that, one may not be able to see it, but it eats quiet a lot of it. Good day to you!

[@bouverscustoms1652]

I have been wanting to give leafing a go. Thanks for the video. Where did you get the roller?

[@TimeWarpCustomPaint]

LiME LiNE

[@XZ-of2dg]

I tried to use silver leaves for the first time to make rotating patterns. The silver leaves broke. Is it because they are too thin? thank you

[@larrylunkerman3946]

wondering if the createx candy you sell on amazon is all good to spray over a ppg brand base and clears? Also do you know if HOK candy would be compatible with other types of bases? thanks for the info, im learning a lot from your videos!

[@TimeWarpCustomPaint]

Yes house of kolor and creatx is okay with other brands, as long as you’re not mixing them together.

[@brianreineke5831]

How soon till you can clear it ?

[@XZ-of2dg]

spin it will break the silver leaf，Is it because the silver leaf is too thin?

[@XZ-of2dg]

Hello, how thick is this golden leaf? thank you

[@joshthrasher9824]

What is the best/easiest way (if there is one) to get a reverse image? Thanks Josh

[@TimeWarpCustomPaint]

Photo shop maybe not sure on your question

[@darreldstarling8917]

Adam Paul / Rock Star

[@michaelpayne9693]

Arkansas

[@TimeWarpCustomPaint]

Thanks for tuning in

[@Beerme-pl2ml]

When can you paint my bike? 😂

[@mehmetsiranlioglu1925]

🙏🙏🙏🙏

[@PhiTonics]

Great video! Do you know if you can powder coat gold leaf? 🤔

[@TimeWarpCustomPaint]

No I don’t think so

[@PhiTonics]

@@TimeWarpCustomPaint too smooth huh? I was thinking if it was done on a sandblasted surface, the texture might come through enough for the powder coat to stick 🤔 Is this technique called "turning gold leaf?" Or is there a different term for this method?

[@deigo2629]

Adam... I don't see a link to the gold leaf ... ive ordered the silver but really want the gold

[@deigo2629]

Found it .. be nice to see it on Amazon

[@TimeWarpCustomPaint]

Thanks I appreciate the support

[@steveo7767]

Salt Lake? Are you close to Kindigit Design???

[@robertscott3399]

ive been custom painting guitars for 20yrs doing the gilding thng not to long but i will say this the leafing or metal that you get from the craft store kinda sucks along with thier sizing or glue. i am building a miniture 70 firebird dash for my brother with gauge fronts and all iam gonna install a clock but his dash on his firebird was a 400 dash so it was engine turned alum but iam thinking of doing chrome foil vinyl and turn it but have found out not the esiest thing to do and it fiol not vinyl its foil w adhesive, but not maybe i should just buy a 4ft long piece already done. lol

[@sterlingcollins3077]

What brand is that silver leaf?

[@TimeWarpCustomPaint]

LiME LiNE it comes out tomorrow

[@joshhayden9895]

Which brand of gold leaf do you recommend?

[@TimeWarpCustomPaint]

LiME LiNE

[@wasupfool5692]

You never mentioned what brand leaf you fount the best, is it a secret lol

[@LVR-xw1yz]

Bonjour qu'elle est le nom de l'appareil pour les effets ?

[@TimeWarpCustomPaint]

Thanks I appreciate the support

[@taraschicagoh1MARS]

667 like

[@julieoliver8170]

Talk to much