I love ur break in procedure an ur sense to check an recheck piston condition. Saw already sounds strong and healthy I believe it will be a hard cutter sir thank you very much for all you do. I'm new to the channel but not saws I log every day and do some tree work for friends and family in my free time I normally have a saw n my hand 7days a week. U have the correct way of saw break in an inspection.hope all is well with you and your family.stay safe.
@JVR-gd7zw3 жыл бұрын
461 is my favorite saw. Woods port, opened exhaust, and a maxflow. Then let her eat.
@SonOfLiberty19844 жыл бұрын
On a side note, I saw you dog into the log pretty hard and she never bogged. That's some nice work... and also speaks to your ability to sharpen a chain and set your rakers appropriately. I an still trying to dial in my sharpening... along with... well... literally everything else lol!
@tinmanssaws4 жыл бұрын
Thanks, thats all part of my testing. Every saw likes a little different chain/raker combo. And I like to put some load on the saws as I break them in to see how much torque I have.
@justinweaver87874 жыл бұрын
Good eye I saw it to a N heard nothing but get it get it get it from the Saw lol.
@brysonjones98583 жыл бұрын
Holy go juice. That was amazing. Well done first off.. I have never seen a greater demonstration of tuning and cutting, it was crystal clear. Man I am in awww on how fantastic it sounds. Cheers from NorCal
@danielsmith86593 ай бұрын
This video … needs to be the pinnacle of explaining a rev limited stihl saw.
@roncorbin15004 жыл бұрын
Well that's proof in the pudding, nice turned out great,
@kenschuh73214 жыл бұрын
Love it . It's a keeper . Peace and love from wisconsin
@simpleman42244 жыл бұрын
Love it! Thanks for sharing buddy! Gonna be a beast! Love me an angry saw!👍👍👍👍🙏🙏🙏🙏🇺🇸🇺🇸🇺🇸🇺🇸
@daninuesca38014 жыл бұрын
Mee tooo!
@5150powder4 жыл бұрын
Appreciate your what your doin with your channel tinman. Only my second watch of your stuff but straight away im like here's a guy I can learn from. I love my 461. Everytime I run it. Big smile. Progressively modding it and it is getting good!
@dillonjolly71554 жыл бұрын
Nice saw brother and love the hat I live in the city of bridges
@tinmanssaws4 жыл бұрын
Saskatoon.????
@jakereape40954 жыл бұрын
That’s a mean saw brother good job
@FlukeTog3 жыл бұрын
Love this saw. Keep going TinMan thanks for all your videos.
@billybowen30234 жыл бұрын
Good one, information rich and easily understood!👍thank you
@Comp6703 жыл бұрын
Wow that runs good. Would love to have you port my 461. Its my favorite saw, I truely think it cuts better then my 661. Could not imagine how it would cut ported.
@tinmanssaws3 жыл бұрын
That 461 of mine runs really well for sure ! Its one of the newer saws that I really like!
@TheFiveyoungs4 жыл бұрын
It was a good illustration and explanation! Thanks
@farmlessfarmer57294 жыл бұрын
Sounds very healthy in the wood!
@HemiOrange4 жыл бұрын
Just found your channel. Great videos so far, agree 100% on break in!
@michaelwhiteoldtimer76484 жыл бұрын
SOUNDS GOOD CUTS GOOD LOOKS LIKE A WINNER, BUT I MIGHT HAVE TO TRY IT OUT IN SOME WOOD HERE
@MegaDirtyberty4 жыл бұрын
Sounds good, I never thought to take the cylinder back off once you have run it. May have to start doing that.
@tinmanssaws4 жыл бұрын
Just peek through the exhaust and sparkplug hole is usually good enough
@MegaDirtyberty4 жыл бұрын
@@tinmanssaws I have a bore scope so I may use that too.
@erikdesson15584 жыл бұрын
Awesome 👍 I have a ms 461, think I put a lot hours on it.
@daninuesca38014 жыл бұрын
ALOHA from Maui!Nice job! New sub!🤙🏾
@tinmanssaws4 жыл бұрын
Welcome!! I think you're my first from Hawaii.
@matthewscantland854 жыл бұрын
That thing look like it pulls hard as hell. 😳
@307j.o.a.t94 жыл бұрын
Saw sounds amd cuts good. Like the detail and explanation you go into on tuning and break in. Thanks!!
@larryreno82934 жыл бұрын
Thank you for explaining “4 strokin “. So it just running fat at full throttle under load?? I’ve hear that sound but wasn’t sure what the cause was. Great video, awesome saw.
@tinmanssaws4 жыл бұрын
Yes "4 stroking is the sound of a rich saw, its overfueling at wot" That saw is rich for break in so you will.hear it 4 stroking here and there in the cut.
@JourneyNorthAK4 жыл бұрын
Good video..clean saw.
@ianritchie1264 жыл бұрын
Sounding good
@garytrapper20644 жыл бұрын
New sub heard about you from iron hores. Love the videos. I'm from B.C.
@tinmanssaws4 жыл бұрын
Welcome Gary
@mikehellekson4 жыл бұрын
Nice job!!
@tedjohn4414 жыл бұрын
Great Job!! Was that a trashed saw when you started working on it? I watched your other video's and don't remember how you got that saw.
@tinmanssaws4 жыл бұрын
Yes clutch side bearing let go, clutch was also blown up. I'm going to do a video on the clutch soon I think .
@greggschultz57683 жыл бұрын
I agree with your process in every way! If you could accept a bit of advice from an old guy, you look so much happier with a Stihl in your hands rather than them nasty Huskys. 😀
@tinmanssaws3 жыл бұрын
Haha thats funny, I run and own both.
@david928674 жыл бұрын
Nice Job!
@jeremydoblinger36093 жыл бұрын
Dang she cuts nice af
@pm2701004 жыл бұрын
good vid well done
@itiswhatitis38392 жыл бұрын
You should run maxflow
@antoniosolari1013 Жыл бұрын
If I take 108 octane race fuel and mix with 2 stroke oil 40:1 Will it be too high of octane for chainsaws ?
@tjlovesrachel3 жыл бұрын
And1 chainsaw shorts ... gotta get me a pair
@doggie9463 жыл бұрын
Tinman-another great video...are new saws typically broken in by the manufacturer? Do you recommend 40:1 mix if 50:1 normally used for first few tankfuls?
@tinmanssaws3 жыл бұрын
New saws need to be broken in by the purchaser, the manufacturer will typically only test fire the saw before its shipped. I run everything at 45:1
@SonOfLiberty19844 жыл бұрын
Your demonstrations are absolutely outstanding to a guy just starting to learn this stuff. The 4 stroking demo is crystal clear here. It was easy to see you lift the saw and immediately hear the difference. How do you decide when a saw is broken in? Do you simply have a static time interval system set or are you looking for signals of how the saw is running before you open er up?
@tinmanssaws4 жыл бұрын
I'll do a video on that in the future.
@aldredske61974 жыл бұрын
Hi Tinman!!😀😀 Nice job buddy!!😀👍👍 I would have a hard time putting her down!!😀😀👍👍 Take care my friend!!😀😀❤ Logger Al
@edwingroening50874 жыл бұрын
Nicely done. Now I want a 461 but first I should turn my 034av into an 036 and try my porting skills. Anyone know what numbers I should be looking for?
@tinmanssaws4 жыл бұрын
Put a timing wheel on it and post the number here or better yet make a video.
@kellyowensby3 жыл бұрын
i have a stihl 038 super av is it a good saw and could you give me you thoughts on it i know its older saw....thanks
@pm2701004 жыл бұрын
all lube is in mix so tune must be right
@constructionduru51954 жыл бұрын
Tinman you got any of those 200's left from a few months ago
@tinmanssaws4 жыл бұрын
Yes i have 2 or 3 but they are spoken for.
@constructionduru51954 жыл бұрын
@@tinmanssaws damn ok well if you run across any others I'd be interested in one.
@jasonturney28003 жыл бұрын
Hey tinman got a question about porting a husky 460 looking for your input
@tinmanssaws3 жыл бұрын
My email is on my about page on my channel. Send me one I'd love to help ya!