excellent video, thanks for the comparison. Yours is the only video that i have seen so far with side by side comparison to Springfield XD9. I recently found the Tisas Zigana PX-9 for $219 but $240 taxes and shipped. It will be the biggest 9mm that I will have in my possession.
@DCopp2 жыл бұрын
It's very nice. I'd have ordered the updated version though with the nicer grip design
@googleuser60958 ай бұрын
I got the Philippine national police overrun model for $191 brand new on gunbroker. Can't beat it. It's not a Walther or Canik but its a great and very RELIABLE pistol. Great Duty, nightstand or Truck gun
@harleyboy653 жыл бұрын
I bought one and am very happy with it, very nice shooting gun. Watch the pivot roll pin on the rear sight, mine would walk out. I had to give it a lite peen to hold it. I trimmed a XD traction grip to fit, I usually need a rubber grip tape on polymer frames
@tractiongrips3 жыл бұрын
We're actually designing a grip for that one as I type. I am hoping we can get them up on our website this week. Seems like a great pistol. Can't wait to take it out to our range and put some rounds through it.
@DCopp3 жыл бұрын
Send me one to review!
@tractiongrips3 жыл бұрын
@@DCopp email us at sales@tractiongrips.com and I'm sure we can make it happen.
@DCopp3 жыл бұрын
Email sent!
@sickasxtyy3166 Жыл бұрын
I now own the grip you guys produced for this firearm , definitely a good upgrade. 🔥
@kenashe7486 Жыл бұрын
Love this gun. Got for $240.00 , M&P Night Sights installed. Shoots well. I carry it on occasion.
@Mike_The_Hog_A_Nator2 жыл бұрын
I noticed PSA has em on sale in OD Green for $299. Not bad for what ya get & the compatability.. I've never had a single issue with Turkish Made Canik TP9SFX. That sucka eats anything at a 2.7lb trigger pull after broken in.. 🤟 nice comparison/review
@jordanashford75218 ай бұрын
I was looking at that exact kit, but took the more affordable route. I'm not even mad, but the TP9SFX is the next one I'm looking at.
@dudespin Жыл бұрын
I picked up one of these pistols last week. 249 plus tax! Mine came with the pnp crest, night sights, and 2 15 round mags. I have not shot it yet!
@TheRed62632 жыл бұрын
great video. The 2nd gen and later gen3 th are awesome.
@angelvalle6515 Жыл бұрын
Real nice shooter
@jonleone7779 ай бұрын
Will the Springfield xd recoil spring assembly fif in the px9. At some point it will neec to be swapped out and i cant find the px9 version anywhere
@petermonck54483 жыл бұрын
My gen 2 came with front and rear night sights.
@youmasajp3 жыл бұрын
Doc, thank you for the video. Now we need to know the trigger pull weight and if we can use any of the PRP parts in this one. :-)
@jamesbridges71222 жыл бұрын
I have that exact 9mm . The trigger pull on mine was 3.7 lbs . After a minor adjustment. It is now 2.3 lbs
@Sandhill1988 Жыл бұрын
I'm torn between this and the BRG-9 Elite... the BGR takes the XD mags and has the exact same safety features as the XD... If I go with the PX-9 I'll have to purchase at least 3 more sig 226 mags, that's about another $90.00 before shipping costs. On the other hand I already have plenty of XD mags. The one potential downfall of the BRG is that oversized slide release lever, I can see it getting accidentally actuated. Good review.
@DCopp Жыл бұрын
Get the PX-9 gen 3. Best by a Longshot. Sig mags are available for under $25/ea if you shop smart
@Freakingstang3 жыл бұрын
Good review. I did one almost a year ago with xs big dot sights for an m&p. I had xd’s years ago and never had one to do a side by side. Have you tried to interchange barrels, slides or trigger parts? Might be an option for threaded barrels for guys. I too thought it was a better trigger than the xds but it’s far from a 1911 or good aftermarket Glock. I also run the #1 backstrap and felt great in my medium hands. I also stippled the Alligator inserts and highly recommend it.
@DCopp3 жыл бұрын
Slides don't quite interchange. Never tried barrels
@drmachinewerke12 жыл бұрын
@@DCopp what does quite mean. Could you elaborate on the difference please Thank You
@DCopp2 жыл бұрын
@@drmachinewerke1 slide rails are thicker on one of them. Thought I showed it in the video. Not sure why it would matter really.
@lesblackwell5242 жыл бұрын
Are the recoil assemblies swappable? I have a PX9 and am wondering about parts interchangeability.
@themonolithian3 жыл бұрын
Both are used by Malaysian military. I'm sure they wouldn't employ garbage pistols
@usman145992 жыл бұрын
Good table review however I would like to know what are you thoughts about accuracy ,which one should tight groups about 25 m range?
@DCopp2 жыл бұрын
Both. Seriously hardly a difference. I like the XD grip a tad better
@usman145992 жыл бұрын
@@DCopp thank you for your response
@johnnyhershberger62942 жыл бұрын
Great video, did you have any problems with the trigger? Seen a video where graham bates had revealed some issues with his gen 2 trigger while he was reviewing the gen 3. Thanks
@DCopp2 жыл бұрын
Never
@larrycunningham3715 Жыл бұрын
I have the Gen 1, can anyone recommend a light/laser combo for this pistol? Been looking for one. Thanks.
@JayW-g6h10 ай бұрын
Can I use that holster as a left handed holster since im left handed ?
@jimbarno802 жыл бұрын
So I shot mine for the first time this past weekend and really like how it feels and accuracy but I had quite a few jams.Can anyone point me in the right direction as far as what I'm doing wrong?
@JTB2063 Жыл бұрын
Does the holster work for both
@DCopp Жыл бұрын
It does
@evanburgan86532 жыл бұрын
the 15 rnd mags are sig 226 mags
@DCopp2 жыл бұрын
So are the 18
@jonleone777 Жыл бұрын
Just picked one up for 200 bucks. Im assuming its a gen 1. Even if it a piece of crap cant pass for the money. Only issue i have is spareparts availability, especially tbe recoil spring assembly
@DCopp Жыл бұрын
Use a Springfield XD9
@jonleone777 Жыл бұрын
@@DCopp thanks much
@dexm20103 жыл бұрын
Seeing that you picked up some extra mags for your XD, is it safe to say you are fairly content with it so far?
@DCopp3 жыл бұрын
It's a keeper
@DCopp3 жыл бұрын
It's perfect grip length for me with a short enough slide. It's very well constructed and has super low recoil and is dead nuts accurate in my hands at any pace I run it. Can't lose.
@rizwanveera30092 жыл бұрын
Hello you have idea the XD mode 2 4” Iwb kydex holster can fit in Zigana px9 ?
@DCopp2 жыл бұрын
I'd guess it would. Maybe use a hair dryer to help if needed
@antitronty17662 жыл бұрын
TISAS PX-9 4.5" 9MM is a good 🔫 or not.
@DCopp2 жыл бұрын
Sure is
@You-Need-Therapy3 жыл бұрын
For those who have the px-9, does it seem to shoot high for you? I feel like the front sight is so tall. I’m new to handguns and need to practice more and improve my form/technique, but I’m definitely gonna get some S&W M&P sights to upgrade it once I get the extra cash. I’m not a fan of the sights it comes with.
@DCopp3 жыл бұрын
Watch my short vid on the sights I installed
@Freakingstang3 жыл бұрын
The rear sight is adjustable, at least mine was. raise it up slightly. I did a 1000 round review with XS sights for an M&P on mine about a year ago.
@t.k.morris2 жыл бұрын
I just bought a new Gen 1 model PX-9 for $211 + $35 shipping... I am hoping this will be a good purchase... Do you still like this gun after 6 months? Any recommensations? And what type of gun oil do you use or recommend?
@DCopp2 жыл бұрын
Love it. It's on bedside duty. I use Mobil1 0w20 and white lithium grease. Grease rails lightly, lube with Mobil1
@t.k.morris2 жыл бұрын
@@DCopp I like economical thinking! Thank you for the suggestion and the review.
@deepdesigns4153 жыл бұрын
Where did you buy it from? Nice pistol
@DCopp3 жыл бұрын
Dahlonega Armory
@abdilkhairomar78473 жыл бұрын
Does the holster for XD 9 should fit with zigana px9?
@Uchiha_Tactical.3 жыл бұрын
Yes
@stanleylzz87052 жыл бұрын
Exactly yes
@daver12591 Жыл бұрын
You assume early in the video that people have researched this gun. I'm just beginning research on this gun and I clicked on this video because it is so similar to the HS2000/Springfield XD and I was hoping you could shed some light on its origins. Just a tip, don't assume people know everything you do, share your knowledge and you will make a more compelling video.
@MichaelMiller-op5sx11 ай бұрын
What gen is yours gen2??
@malikfida03 жыл бұрын
Very good for you
@Dntlookfame3 жыл бұрын
Where can we find an iwb holster for it also some night sights
@DCopp3 жыл бұрын
S&W M&P night sights fit. Any leather IWB for FNS9 or XD9 should work too
@Dntlookfame3 жыл бұрын
@@DCopp thank you 👍🏽
@juanm.garcia32202 жыл бұрын
@snakedoc, do you think the XD 9 slide would fit on the Zigana Frame?
@DCopp2 жыл бұрын
Nope. Back plate is a problem
@lokisgunworks7903 жыл бұрын
Can anyone tell me where i can find a threaded barrel,slide and trigger components I just got this gun without doing a lick of homework on it first and cany find shit for it
@DCopp3 жыл бұрын
Doubtful you will
@themandan40003 жыл бұрын
Probably going to have to get it custom fabbed
@lokisgunworks7903 жыл бұрын
Welp it'll look nice in a my truck because it's damn sure about to stay there 😂
@avigares3 жыл бұрын
i love this gun and i've shot lot with that..
@AK-ns4mg2 жыл бұрын
Does the barrels interchange?
@DCopp2 жыл бұрын
Yep
@DCopp2 жыл бұрын
I have a.shorts vid on it
@AK-ns4mg2 жыл бұрын
Very glad for your reply,could you please send me a video or pictures
@DCopp2 жыл бұрын
@@AK-ns4mg it's on my channel
@DCopp2 жыл бұрын
@@AK-ns4mg kzbin.inforQ7PEO-SRkM?feature=share
@brucelouie46132 жыл бұрын
Do springfield holsters fit it
@DCopp2 жыл бұрын
Yep
@brucelouie46132 жыл бұрын
@@DCopp what conceal carry holster would you recommend I'm thinking of a getting a Kydex holster for it but it's only available for the XD 9
@DCopp2 жыл бұрын
@@brucelouie4613 kydex can be reshaped with a hair dryer
@brucelouie46132 жыл бұрын
@@DCopp can you appendix carry it
@DCopp2 жыл бұрын
@@brucelouie4613 probably a good way to hide it
@Hakeem4182 жыл бұрын
Do anyone know if XD light bearing holster fits?
@micemr762 жыл бұрын
This or the sar9...if u could only have one? Please
@DCopp2 жыл бұрын
SAR is a bit more comfortable and easier to work on. I love how the PX9 shoots though
@micemr762 жыл бұрын
@@DCopp I can't decide...I want to dip my toe into a Turkish gun. Having trouble deciding sar9, zigana, or stoeger. Personally prefer hammer fired cause I'm old but want to get my round count higher then 8-10. Ty for the response, gained a sub
@micemr762 жыл бұрын
Psa has the sar9 for 249 free shipping and a 30 mail in rebate to pay for transfer fees and background. Hard to beat if it's any good
@DCopp2 жыл бұрын
@@micemr76 hammer fired you should buy the SAR B6 or the SAR CM9 gen2. Both are outstanding and use cheap cz75b mags
@micemr762 жыл бұрын
@@DCopp but again my round count goes way down. I have hammer fired weapons, 1911s and such. I just really prefer sa/da, way I was trained. But I want that 18+1-20+1. Almost forced to go striker fire, and for 220 I figured I give it a shot. They also have the zigana with holster for 300. If I'm forced to carry ten or less then I'm carrying a .45 not a nine
@stanleylzz87052 жыл бұрын
I have both it Don't matter to me....
@gunsquawk44432 жыл бұрын
It's more like a FN 509, definitely nothing like an XD. You bumped yer head.
@DCopp2 жыл бұрын
You're wrong. But it's ok
@lenculpepper9150 Жыл бұрын
It's an XD clone.
@brianmatthews882411 ай бұрын
I have a XD and a px9 it's Not a XD Clone at all" and it shoots even Better than my Glock 17 ' also it just feels more Solid...But you've got to adjust for the Trigger pull..
@rocojimenez40082 жыл бұрын
As en español bro
@AbidKhan-io1ge3 жыл бұрын
Give me plz i like i. M from Pakistan
@AbidKhan-io1ge3 жыл бұрын
And price Pakistan
@Drixels2693 жыл бұрын
XD clone.
@DCopp3 жыл бұрын
Of sorts, yes
@elrs51642 жыл бұрын
this gun is very ugly the grips are very ugly
@DCopp2 жыл бұрын
Thanks for sharing!
@elrs51642 жыл бұрын
Springfield XD very good gun next time compare it to a canik the zigana does not compare to the springfield
@DCopp2 жыл бұрын
@@elrs5164 it does because it is based off of it. 100%
@julikocaribe1982 Жыл бұрын
DOES the Tisas PX9 MAGAZINE fit in the Springfield XD 9 and VICE VERSA????....