Titan Motorsports Methanol Injection Kit Installation Guide For The MKV Supra

[@ShayHarambe]

I sold my Visconti lpfp while making this video! That means new fuel system coming 😝😝😝

[@b58naki]

tf is there to upgrade to????

[@ShayHarambe]

@@b58naki just posted the video like 3 day ago lol

[@b58naki]

@@ShayHarambe why 5ive performance???

[@ShayHarambe]

@@b58naki by chance did you watch my newest video on the fuel system? It shows it all.

[@arellano2135]

Good video bro. Wish I had this when installing my kit. I don't know if you mentioned it but you can purge the system by pressing the up and down arrow together. I do it usually before a run just to be sure my pump is good. I had a pump go bad on me once and so it's a habit to test it now before a run. Also good to take off the nozzle every few months and just let it spray while the car is off into the air just to verify that your nozzles aren't clogging and you still have a good spray pattern.

[@ShayHarambe]

Woahhh no I didn’t know that! I haven’t seen that before. Shoot I wish I knew that before 😅 in the past I had a AEM kit. That kit had a purge button on it. But quality of that kit compared to this kit is crazy. The snow performance kit is so nice.

[@marklinley815]

Thanks for sharing your Snow performance kit install. Don’t see many of them on here. I chose the AEM method kit for cooling also. I might have missed it, but did you install a filter inline before it goes into the chargepipe? I see where some do and some don’t.

[@ShayHarambe]

So oddly this kit doesn’t come with a filter like the AEM kit. When I installed a AEM methanol kit before I installed the filter between the tank and the pump. For me I’m not to worried about a filter just cause it’s for cooling only. If I was tuned for the octane boost I would be more worried about it due to potential nozzle clogging.

[@marklinley815]

@@ShayHarambe I agree. I had to order the filter separate for the AEM method kit off of Amazon. It didn’t come with. I do like the Snow performance fittings better than the AEM though.

[@danieloops]

Awesome job! Gonna order one & be installing one myself now 👍🏼. I have a Visconti reflex kit, does it need to plug into that as well?

[@ShayHarambe]

No sir. The reflex kit is its own assembly.

[@kevin-jm3qb]

if you're all about temps then why are you keeping the engine cover on?

[@ShayHarambe]

🤦‍♂️

[@kevin-jm3qb]

@@ShayHarambe lol

[@jesusperalta403]

What size nozzle you use?

[@ShayHarambe]

#4

[@user-ki8zf1rp1e]

I believe theres a way to control meth injection with Motiv Reflex as well, it just won't indicate low fluid level.

[@ShayHarambe]

Realllyyyyy???? 👀👀👀 I’ll have to read into that. Yeah I don’t really care for the low light. 🤷‍♂️ idk where I would even put it if I used it. But at the rate I’ve been using fluid idk if I’ll ever run out 😂 that 4 nozzle is small.

[@user-ki8zf1rp1e]

@@ShayHarambe Yessir, it wires into one of the output channels and uses a PWM signal. Not sure if the Snow Meth solenoid works but I can confirm that it works with Aquamist FAV and Prometh Pulse Valve. Trevorjelam has made one or two shorts on the setup, if you're curious, albeit it's with nitrous instead of meth. He's using flex fuel too

[@zaidsadeq2072]

Make sure to have a look at your afr because the meth will force your ecu to make adjustments