In this video I fabricate a quick attach system for the front end loader on my old ford 4500.
Пікірлер: 44
@SeeMikeDoStuff5 жыл бұрын
Sweet, I was looking for someone who'd specifically done this to a 4500. Putting one on my '72, super helpful. Thanks!
@danielh47595 жыл бұрын
I'm glad I could help!!
@oby-16075 жыл бұрын
Amazing how you can fix a tractor with a little blue paint. Seriously, you have done some very nice work and hope you do some more.
@ButlerMillWorks4 жыл бұрын
Really nice job on the fabrication. I have a Ford 1910 and am looking at doing something similar or just buying the $800 kit...
@johnantinori3662 жыл бұрын
nice, he is a craftsman, good information that i can really use just wish there was better lighting
@FromSteelToWood5 жыл бұрын
Well done! Brings me some souvenirs!
@danielh47595 жыл бұрын
Thank you Joe!! Your fabrication videos acted as inspiration for me to restart my channel. I enjoy watching your builds.
@FromSteelToWood5 жыл бұрын
Thanks! I must say your channel will grow fast!
@RCAFpolarexpress5 жыл бұрын
Good day Sir, Joe Lesage has posted your video and your Quick attache is very strong and very well done ! Your very good at engineering this marvels of yours ! And congrats for your tractor renovation ! Cheers !
@ronraley13 жыл бұрын
In
@RCAFpolarexpress3 жыл бұрын
@@ronraley1 😊👍🍻
@qantes3 жыл бұрын
Great job on that project. I am looking at doing a quick'tach conversion on my Ford 545D. Got some ideas from your video
@kevinashby37844 жыл бұрын
You obviously are a great fabricator and mechanic. However your video could really use more light. (You probably know that though).
@kennethplunkett54762 жыл бұрын
just one word,LIGHTING.
@godspeedparadeteam3 жыл бұрын
Very cool looking into setting my case 385 set up with a quick attach set up. Good information thank you for sharing.
@ThetreeDraggon6 ай бұрын
dam! your good at that welder, at least in my opinion anyway. i wish my dad not only taught me how to use a welder but actually committed to buying one as well. all well i guess its cool to see videos like this anyways. 😂👍
@stephengordon89683 жыл бұрын
Wow that looks great , nice work !
@IMRWC18 ай бұрын
Can you use bobcat buckets with your new setup?
@stevegarlock4269 Жыл бұрын
Looks awesome, exactly what I want to accomplish. Curious about mask though am I missing something?
@eddieco4 жыл бұрын
Nice work!
@ronraley13 жыл бұрын
9o
@ronraley13 жыл бұрын
0i0 iii 0o9u
@GrampiesWorkshop5 жыл бұрын
How's she goin'? Joe Lesage mentioned you in his video about the quick attach and I like tractors and making mods to them, so I'm watching and liking. I clicked sub and like. Nice job and a nice old tractor too!! Thanks for posting!!!!
@codyshearer76265 жыл бұрын
Good day sir
@JB-kw4ug3 жыл бұрын
Nice job 👍
@willtricks94324 жыл бұрын
Nice work, thanks for the tips.
@sappernz4 жыл бұрын
Loves your work however as it's already been said you really need more light for better quality videos
@ncep40953 жыл бұрын
Great Job Thank for sharing
@ICOWBOYIM4 жыл бұрын
I think I would have added the shims to each of the implements and not to the tractor Quick Attach Adapter. That would have made it more precise to account for variations in implement mounting plates from various companies.
@nickharris83044 жыл бұрын
Most of your newer implements are a very close to universally sized skidsteer type attachment. This should fit almost every newer implement.
@ICOWBOYIM4 жыл бұрын
@@nickharris8304 Good point, thanks 👍
@fishhuntadventure4 жыл бұрын
At risk of sounding like a fly-in troll....I just gotta say YOU ARE NUTS using an angle grinder without a handle or the guard in place. Accidents happen to habitual safe people (me) and I can tell you for free some unexpected things HAVE taken me by surprise. Even with proper safety glasses the guard is needed to help protect your eyes, never mind your fingers. Really. Just. Stop it! The other thing about a guard: when you need that ‘extra clearance’ in a tight spot, the guard is a safe place to put your second hand when you have taken the handle off. Also, if you bevel the top edge of your ears/tabs you put on to keep implements from sliding around it will be SO much less maddening to mount the bucket or whatever, and it will sorta self center, too.
@learnjcbskidsterchickensga75943 жыл бұрын
Wow. Very nice
@burtlade1705 Жыл бұрын
I like it!
@spartaeus5 жыл бұрын
I'm curious why so many of your videos are unlisted from your channel page ? Theres only 3 videos listed on there. I have to click on one, which leads to another, sometimes...
@danielh47595 жыл бұрын
I was not aware of that...thank you for letting me know. I will check my channel settings. And thanks for watching!!
@spartaeus5 жыл бұрын
@@danielh4759 I appreciate your reply. I have a 4500 gasser that hasn't run in 3 years, and so far your videos have given me some motivation to get it running again.
@danielh47595 жыл бұрын
It has been a long road getting my 4500 running. But SO worth it.
@spartaeus5 жыл бұрын
@@danielh4759 Absolutely! I think the older tractors were in many ways more reliable, and definitely cheaper for parts than the newer machines. Hope you find a way for your viewers to find all your videos. I'm hoping you have videos of your tractors restoration.
@danielh47595 жыл бұрын
@@spartaeus Mostly pictures, but some video. One of these days I will mash them together and hopefully it will make a good KZbin video.
@skipjagger5 жыл бұрын
nice work! I used the same Titan Attachment plates on my QA conversion. My tractor is just a little guy so I had to choke everything up. Its cool to see how other guys do theirs! I just have to say... its impressive the amount of work you put into that tractor. That thing is massive!!! hahah. I really liked the beginning of your video when you quickly flash through all those pics! kzbin.info/www/bejne/h3WzqGmtZqagh5I have a look if you are so inclined, I haven't done a build video yet... I have been meaning to make that since I finished the assembly like 2 years ago now.... ugh... some day I'll get to it. I hope to see more of your videos!!! have a good one.
@danielh47595 жыл бұрын
I actually checked your video out prior to my build! It was inspirational. Cant wait to see your build video.
@skipjagger5 жыл бұрын
@@danielh4759 ha! NICE!!! I have so much random footage I honestly have no idea where to start!