MikroTik Tutorial 78 - Ubiquiti AP bridged to Mikrotik router

[@tiaktiaktech]

Even after 6 years your videos help a clear and concise explanation Hats off to you boss It would be an honor to be your student respect from Senegal

[@ahmdnaube3745]

The way you explain cannot be matched with any other channels. Explanation is amazingly clear.

[@JohnSmith-dc6lc]

👍🏼 and subbed!! Thank you for this! Very well explained and demonstrated. Finding your channel is like chocolate, one bite is just not enough… Thank you 🎉

[@denhansol7633]

thank you for all the video you upload. I start learning about mikrotik now. Gob bless always and keep it up brother. Your such a good guy. Sharing knowledge to every. I salute you.

[@Keji_and_hunter]

simple and yet very imformative... not only in software but also actual video on it

[@umhastv4756]

Thnks for your Help, and I really appreciate and learn a lot. The way you explained was perfect Sir.

[@MissionStreet]

good video - I have 2 nanostations m2 and and 3 UAP APs currently on a separate system. I just pulled out my nanostation M2 and plug it to my mikrotik hex 750br3 ether2, followed your video and great it just did what your video says. now, how do I link/integrate this to mikrotik's usermanager and radius server? if you have a video kindly link it please. cant find it anywhere? thanks again!! thumbs up!!

[@DRbiggy101]

Thank you for the video. Very informative, quick one how can you use hotspot(user manager) feature on m2 .. the m2 acts as a hotspot while mikrotik manages users log in

[@LuckymiguelDraculla]

Thank you! Your tutorials are the best and spot on!

[@TKSJa]

Glad you like them!

[@dusankulisievic2535]

Hi, very nice explanation. What about the Ubiquity Unify Controller which is a DHCP server itself? How to manage the MikroTik being a DHCP server for Unify Controller and all Ubiquity APs which UnifyController is DHCP server itself providing different network to clients? I guess this is not possible, that somehow the bridge should be defined for the case as well, but I am not sure. Your answer will be appreciated.

[@calculative1387]

You are really trying thank you so much

[@GidieNesh]

Can you manage users connected to ubuquiti via user manager? Or any other kind of management system?

[@arttheseven5526]

What if i have 2 wifi routers as 2 access points, can the 2 AP have the same ssid? So users don't need to change when they move from 1 area to another.

[@predragsinko2513]

Brilliant..if you have some switch after mikrotik router, is it procedure the same?

[@TKSJa]

yes

[@GeorgeTsoukalis]

Hi , With this opportunity i would like to ask you , Witch is the best solution for high density Hot Spot a) only Mikrotik equipment b) Only Ubnt equipment c) Mikrotik for routing + ubnt for wifi. Thanks for your Videos.

[@bringittothetop3790]

Thank u for this. btw, how about if i have to make the nanostation m2 as the station connected to hap lite and make the hap lite as home network

[@newmiziri]

Hi There, I have question 951 Mirotek router as I underand port is by defult is Wan while 2 to 5 are lan? my question,made confused some prb setup port 1 as wand rest Lan ,is that need and make all 2 to 5 are one bridge this real made lost i need help thx

[@leiftismo2793]

sir im having a problem catering a 300 client with RB4011 and UAP-AC-LR do you have any suggestions? My current speed is 300mbps the UAP-AC-LR only transmits 45mbps directly from RB4011 with 1 meter UTP cable and declining as a no. of users connected increases (take note: no limit on speed per client), 30 meters speedtest from laptop to MT tru UTP cable is 100% stable so network problem is not the problem. But when using UAP-AC-LR on a number of clients drops the connection to 128kbps - 2mbps per client

[@TechFrontiers888]

hello, do you have tutorials on how to add additional wifi router via lan to microtik to extend my wifi connection.

[@RailroadEnthusiastJasemDeSkot]

I have my ubiquity ap set to re sell wifi, I have connected it to mikrotik router, so clients are stealing wifi password via scanning qr code. How can I hode the qr code not to appear on android tap to share option?

[@Rudzishub]

Hi, may you please make another video using AP as a hot-spot were user created on user-manger can connect to AP and get authenticated

[@gaurabpokharel6373]

cant This AP be added to microtek wireless interface ?

[@ojnunezm]

Hi there. That AP can be used indoor? or outdoor only?

[@RailroadEnthusiastJasemDeSkot]

Outdoors too

[@GeorgiKrystev]

Great tutorials! Keep the good work! A tutorial for WDS will be very useful as well.

[@clayjohnathan6734]

You all prolly dont care at all but does any of you know of a way to log back into an instagram account? I was stupid forgot my password. I love any tips you can give me!

[@bjornkieran9595]

@Clay Johnathan Instablaster :)

[@clayjohnathan6734]

@Bjorn Kieran thanks so much for your reply. I got to the site thru google and I'm waiting for the hacking stuff now. Seems to take quite some time so I will get back to you later with my results.

[@clayjohnathan6734]

@Bjorn Kieran It did the trick and I actually got access to my account again. Im so happy! Thanks so much you saved my ass!

[@bjornkieran9595]

@Clay Johnathan you are welcome xD

[@BakwenaMedia]

@TKSJa thanks for all your videos!! how can one use PPPoe and Radius Authentification with this setup.. I've been battling to set it up using the steps in your "hotspot" your videos

[@weinosby]

Pls help! where do I connect my network switch to mikrotik hAP lite and unifi ap lr? I'm getting confuse where to connect them. Any help would be greatly appreciated.

[@brianjumandiema6406]

Hi, Kindly do a tutorial for a point to point with unifi nanostations while on mikrotik hotspot

[@ashbrylletv4860]

sir how about i have haplite and my AP is basebox2. how to configure the haplite to used usermanager from basebox2? thank you in advanced.

[@BRWNMN]

Thank you sir! This saves my day!!! 😊😊😊 Great tutorial!!

[@ericknaus4998]

Great videos! Just curious, are you going to do anything with CAPsMAN and the Mikrotik AP's?

[@TKSJa]

It's in the pipeline

[@ericknaus4998]

@@TKSJa great! Look forward to i

[@jeanyamradomes2561]

Can you do mikrotik UNMS integration tutorial?

[@ponlorkbeang9195]

Hello, could you please create 3 Vlan in mikrotik, 2 hotspots and 1 dhcp server connect to Unifi controller for create 2 SSID. All APs will using ip from DHCP.

[@voiceoftruth1O1]

My mikrotik router has a built in Poe port. So do I need external 24 volt Poe adapter to connect access point? thanks.

[@matthewlovibond900]

I've not played around with PoE on Mikrotik but I believe it depends on exactly what router your have. There's the official 802.3af/at poe standard which is 48V, then there are unofficial "passive poe" standards at up to 30/57V and the mikrotik wiki says support varies from device to device. I think with passive poe it's probably safest to use the official injector supplied by the manufacturer but I may well just be spreading FUD.

[@elielmurmu]

Thank you man!

[@sumanclick2979]

Thanks for your tutorial.

[@gohanregaton8249]

Can I use rb951ui2nd? Same instruction? Thanks

[@ubi6874]

Yes

[@totallyblessedson]

Hi, are you planing to do a video on Routing?

[@TKSJa]

Sometime in the future.

[@gouravazad1371]

When i set frequency to auto microtik doesn't detect my ap ? What could be the issue ?? When it is on 5300 it instantly connects but yhe output power on ap gets limited to -4db. Please help anybody

[@zagbaleeric3706]

Great thanks to you master tksja .this video is very helpfull

[@TKSJa]

You are welcome

[@andljoy]

i wish you could flash unifi APs to be able to be managed by capsman , the unifi controller has just got worse over time.

[@TKSJa]

yep

[@quicktutorialsbydes6625]

Hello, please make a video on how to block tor browser on MikroTik router. Thank you.

[@TKSJa]

That's a bit tricky because tor used the standard https port 443. Read www.computerworlduk.com/tutorial/security/tor-enterprise-2016-blocking-malware-darknet-use-rogue-nodes-3633907/

[@hero2006]

Great video. Thanks for sharing.

[@TKSJa]

Thanks

[@danteTheCollector]

1st off thanks for all your vids man , its a great help! also can you make something like basebox 2 bridged to another mikrotik router like rb951g where hotspot is setup on that router. so mikrotik basebox 2 is like an extension of the hotspot! will be a great help! thanks in advance!

[@TKSJa]

MikroTik Tutorial 56 - Configure your BaseBox as AP Bridge using Quick Set kzbin.info/www/bejne/q2O1hZmXg5p-j80

[@jephfabreek6183]

Hello sir good day Thanks for the video it helps mi lot There's many people needed this video. 😄 Can this AP use for many users for wireless? Hehehe I hope you can answer my question

[@RailroadEnthusiastJasemDeSkot]

Yes it does, i am using my ap to resell my internet wireless to clients

[@korircheruiyotvictor2338]

thanks very much

[@mpdcsison2701]

good day sir, please make a video on how to assign individual ip address that can bypass the firewall rule on access facebook. thank you

[@qayyumalbalushi1687]

Thanks

[@linkgj]

Are you Jamaican?

[@TKSJa]

Yes

[@waphentv8569]

new subscriber here... can you config LiteAP 120 as a access point...??? please help me...

[@angelcornado9673]

WDS

[@FoysalGoniChowdhury]

I love SCRIPTS

[@TKSJa]

Good

[@zeslap]

This tutorial got me out

[@lincolnkantet96]

Great work I've been following your videos they are so good.... please show US to apply the auto expire script..... Apply this to a hotspot user profile: { :local date [ /system clock get date ] :if ( [ /ip hotspot user get $user comment ] = "" ) do={ [ /ip hotspot user set $user comment=$date ] } } Run this once per day: { :local offset 7 :global today { :local date [ /system clock get date ] :local montharray ( "jan","feb","mar","apr","may","jun","jul","aug","sep","oct","nov","dec" ) :local monthdays ( 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 ) :local days [ :pick $date 4 6 ] :local monthtxt [ :pick $date 0 3 ] :local year [ :pick $date 7 11 ] :local months ([ :find $montharray $monthtxt] ) :for nodays from=0 to=$months do={ :set days ( $days + [ :pick $monthdays $nodays ] ) } :set days ($days + $year * 365) :set today $days } :foreach i in [ /ip hotspot user find where disabled=no ] do={ :if ([ :find [ /ip hotspot user get $i comment ] ] = 0 ) do={ :local date [ /ip hotspot user get $i comment ] :local montharray ( "jan","feb","mar","apr","may","jun","jul","aug","sep","oct","nov","dec" ) :local monthdays ( 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 ) :local days [ :pick $date 4 6 ] :local monthtxt [ :pick $date 0 3 ] :local year [ :pick $date 7 11 ] :local months ( [ :find $montharray $monthtxt ] ) :for nodays from=0 to=$months do={ :set days ( $days + [ :pick $monthdays $nodays ] ) } :set days ($days + $year * 365) :if ( ($days + $offset) < $today ) do={ :local name [/ip hotspot user get $i name] :log info "HOTSPOT EXPIRE SCRIPT: Disabling Hotspot user $name first logged in $date" [ /ip hotspot user disable $i ] [ /ip hotspot active remove [find where user=$user] ] } } } }

[@TKSJa]

Create a schedule that runs continuously, although it will slow down your router.