Doosan Lynx 220LY live tool milling

[@brandonwillis5792]

Great video. I just purchased the same machine and this is a really great example of the where the y comes in handy

[@cnctobi]

Thanks, its a great machine especially with the Y axis

[@ottobildstein5933]

I like the Doosan machine much with first class Benz live tools. Powerful and unbeaten high quality, try!!

[@cocolokillo3996]

Hi there! Excuse me what's the M code to activate the Y axis? Or wich code do you use? Thank you!

[@shyamdesale6372]

Which software uses this program

[@BrickTactical]

Pretty bad ass my friend!

[@cnctobi]

clonetrooperx39 thanks :-)

[@njm24381]

What Cam is this?

[@BrucalifoChannel]

Hi Tobias, my lathe (doosan puma 2100 sy) with fanuc iseries control, when reading the first G1 feed it starts by itself to work in deg / sec, inserting g94 before the G1 command, it works quietly well. In your opinion, is there a parameter on post processor to change?

[@MyHappyCats]

That will depend on your cam post processor. You need to change in post if you want to change. It depends on what cam do you using it. I'm working with Mastercam reseller as an application engineer. I already did many post processors before including many model of Doosan's machine

[@antoniodelarosa3031]

can you show me your g code? of this program to see how do you have a variable speed cut in groove

[@Zukovec]

very nice , but id do recomand that you use lead in and lead out x axis and z axis in the same line you get a smoother path

[@jb0915]

I agree

[@briskindiaautomation5576]

Very nice

[@briskindiaautomation5576]

Can I call u, share your contact no We need your help sir

[@davidgrt]

excellent

[@dadandsonsworkshop]

What post processor did you use with this for Fusion? Just purchased one. Thanks

[@cnctobi]

In the video I use an modified Haas post processor but now I mostly use that one "Doosan Mill/Turn with Fanuc 31i control" which you can download from Autodesk

[@jb0915]

I run two of those machines. I like them

[@mobinaakhgari6277]

Can anybody tell me what exactly is "live tool" ? Is it a tool that is moving?

[@MSAuzaarEng]

its rotary tool. can be used as milling tool.

[@ryana2652]

I can tell straight away that wasn't done with the iGuide 🤣

[@johnharaldschjelderup8288]

Just curious - are those live tool holders ok with running without coolant at high RPM? If so - what make are they?

[@cnctobi]

It's not very good for them because the coolant cools the bearings, without they get pretty warm. I had one gone bad and it costs around 500€ to get it rebuild by Eppinger

[@jb0915]

Yeah, you want to run coolant. They will literally weld themselves to the part. It will cause the tool to explode. Trust me, I have made mistakes. It will not hurt to run one part without coolant when you first start running a job. Just make sure you have coolant more so for any type of drilling. Trust me. But yeah, coolant is a must

[@mansk567]

can i do this job doosan lynx lm model machine?

[@cnctobi]

you could do the first two operations on a LM machine but for the last milling operation you need a machine with a Y axis

[@mansk567]

Tobias Merten thank you for reply can i do id milling using g12.1 in 220 lm machine?

[@cnctobi]

id milling works too

[@mansk567]

Have you any sample program Id milling in lynx 220 lm machine using g12.1?

[@cnctobi]

@@mansk567 I use Fusion 360 to program the machine, you can download it and make a program for id milling

[@13anomalous16]

I know live tool motors are fairly loud but Jesus Christ

[@kellybruce5842]

Love stumbling on videos like yours - seeing Eppinger Tools at work - if you need any support or additional tools contact your local supplier or www.exsys-tool.com - tooling with Optional Expansions and a quick change options!

[@stevenrose3067]

this a great machine, to get the most out of it we offer training @ cnc-solutions-uk.co.uk