I Made Living Woodturning Building These Kind Of Sets | 4-Ways project

Mike - • Turning Wonky Windswep...
Sam - • Turn a Set.....OF TUBE...
Richard - • Richard Raffan on turn...
Enjoy
_________________________________________________
Harvey Europe
www.harveywood...
Harvey USA
harveymachiner...
Harvey Turbo T-40 Europe
www.harveywood...
_________________________________________________
KLINGSPOR CROATIA - www.klingspor.hr/
CLOTH BACK SANDPAPER - www.klingspor....
PAPERBACK SANDPAPER - www.klingspor....
SANDING PAD - www.klingspor....
SCOTCHBRIDE PAD - www.klingspor....
150mm SANDING DISCS - www.klingspor....
_________________________________________________
CRAFT SUPPLY USA WEBSITE
woodturnerscat...
VICMARK VM120 CHUCK
woodturnerscat...
MOFFATT WORK LAMP
woodturnerscat...
_________________________________________________
MY LATHE
drechslershop....
STEINERT WEBSITE
drechslershop....
AFFILIATE LINKS.
NEUREITER and WOODCUT tools I use :
M42 BOWL GOUGES - neureiter.idev...
SCRAPERS - neureiter.idev...
CRYOGENIC BOWL GOUGES - neureiter.idev...
WOODCUT PRO CUTTER - neureiter.idev...
WOODCUT PRO ADVANCE - neureiter.idev...
IRONS SHEAR SCRAPER - neureiter.idev...
WOODCUT BOWL SAVER - neureiter.idev...
________________________________________________
GURTOOL TOOLS
Bowl gouge - www.gurtool.cz...
Spindle gouge -www.gurtool.cz...
Calipers - www.gurtool.cz...
Sanding pads - www.gurtool.cz...
_______________________________________________
www.tobi.si/en
CBN WHEEL
www.tobi.si/hr...
BENCH GRINDER
www.tobi.si/hr...
DIAMOND FILE
www.tobi.si/hr...
________________________________________________
disclaimer Methods that are shown works great for me and they are not only methods out there, if you find this or any other method not comfortble,please use some other way.
Thank you and enjoy

[@MikePeaceWoodturning]

You provided lots of good detailed information, Tomi. I made my DIY "Enforcer" after watching you and Richard use it and it has become one of my favorite scrapers.

[@glencrandall7051]

Well done. Six beautiful sets. I would be proud to have them on my table. Thank you for sharing. Have a great day and stay safe.🙂🙂.

[@tonyturnswood]

As a more one-off turner, it is so good understanding how a production turner approaches the work! I really appreciate these videos. I never miss one and learn something every Time!

[@platinumprints]

Great demonstration Thomislav.

[@DougMilleratWoodSpunRound]

Thank you. Picked up a couple pointers. I enjoy turning square plates. Your treatment of the center of the recess helps a lot.

[@DavidBird-uu8km]

I love watching you turn thanks for another great four way video. Off to see the other three.

[@jorisdemoel3821]

A very nice set, and you explained the steps to get there very clearly. Thanks for another fine video.

[@jonathanmangold5024]

Another superb video. I wish you lived closer!!

[@stevenhansen8641]

🕶very nice Tomislav. Very helpful tutorial. Thanks

[@jpncompany6275]

The uniformity of your set is quite nice. On a side note I have been using a much smaller bead/dome detail for awhile also on my bowls. I was looking for something different from the "standard" V grooves. It looks clean and nice on the plates.

[@AlienLeader4]

Awesome video. Thank you for sharing your knowledge. Keep up the amazing work. 👽

[@jayscott306]

Excellent design, Tomislav. I had a question but forgot it. Okay, I have been sitting here for 3 minutes and it finally came back to me. It was simply about the pace that you work. We've seen how quickly you can go, and I've picked up my rate thanks to your instruction. But, if you were just doing this without making a video would this be twice as long as it would normally take you or how much less time do you need for something like this where the camera is not rolling?

[@matko101000]

I like this set. Which wood is this?

[@frank1crayon]

Thank you Tomislav. I'm new at this and I learn a lot from each of your videos. Is that "refiner" your own grind of a bowl scraper, or is it an off-the-shelf tool I can get somewhere?

[@johnmeeks9618]

Boy! Watch out for those wings (corners), they can be really dangerous!

[@turningwiththewoods]

I honestly never learned to use the scrapper as part of my process until watching your videos. I now quite enjoy using them and find I’m getting better and better at it and my surfaces are improving. Thanks.

[@johnnyb95678]

The first one is the easiest. Copying that into the others is very hard. Nicely done! And thank you for the great tips and tricks.

[@rossmannburo]

thanks a lot Tomislav!! very clear and usefull.

[@jude4896]

Nice job! Thanks for sharing

[@Phil-io4mj]

Nice work, Tomislav.