I discuss FRFR cabs and the importance of transparency when dialing in your digital platform. I also do a shoot-out between several FRFR cabs and monitors.
Пікірлер: 416
@landon.cunningham4 жыл бұрын
I can't imagine dialing in a studio tone with speakers. I always dial in my tones with headphones - and when I run through the board if they run me flat I always sound the same. Every time I sound different there is some active filter or something they forgot to remove - I can instantly hear it - then they remove it and it sounds great. This works with every modeler I've tried.
@TheSavage19695 жыл бұрын
IMHO no need to overcomplicate things nor overthink them. If using a modeler and playing venues straight to FOH, setup your patches using a high quality PA monitor such as QSC, JBL, Bose, Yamaha, etc. since this is exactly what is going to be pumped out from FOH to your audience. Setting up your patches to sound great on your backline or stage monitor will only result in your sole satisfaction and not necessarily that of your audience which should be the priority of concern. I play through high-end amp/cabs at home but build presets through PAs. I highly recommend checking out the QSC K12's as a solid choice. This is just the opinion of an old man so your mileage may vary. Regards.
@claudetoybox2 жыл бұрын
I agree with everything you say. Dialling in a sound goes through many procedures. We spend so much time creating a great sound and then put it through a horrible speaker. The one thing that doesn't make sense to me is this: After spending a lot of time dialling in the right sound through a great FRFR speaker for our own stage sound, what about FOH? For example, we send Output 1 to FOH (AXE FX) and Output to to our monitor. So after all that work we've done, our FOH sound is most likely going to - two plastic speakers!! So the work pays off when we hear ourselves onstage, but FOH is still going to plastic PA speakers with a shitty sound! It's like, as guitar players, we can't solve everything! I'm sure some FOH speakers are made of wood but most of the pubs I play at that have in house PAs, have flown plastic FOH speakers! What do we do then? We'll always have a great onstage sound but not a great FOH sound - and though the FOH guy can EQ our sound, we're actually only solving half the problem!
@tylerdodmusic4239 ай бұрын
I swear by the Laney FR 212 cab. They sound incredible!
@MarcsFpvAddiction6 жыл бұрын
Great video. I am using a pair of Tech 21 Power Engines and I am happy with them. They are not true FRFR but close enough for my ears. And they are real cabinets. Just a home recorder.
@andrewbutcher33916 жыл бұрын
The Gemini and the Line 6 sounded best to me. I use the L2t at home and as a monitor or an amp at gigs. It's heavy but I think I will stick with it.
@ChadPhillipsMusic6 жыл бұрын
Hey TW, thanks for this awesome video and the accompanying demo video. It changed my life. I wasn't able to purchase the Friedman (budget), but after watching your video I looked at active monitors with the characteristics you talk about in your video (namely high quality drivers and a wooden enclosure; it also has oversized heat syncs, is fan cooled, has tons of headroom and sounds very transparent) and found a Fender Fortis F-12BT in an open box with a price I couldn't resist. I rolled the dice and I'm so glad I did. I cannot believe the difference between it and my JBLEON 612. Like night and day. I don't know if it's the drivers, the cab or both, but it sure seems like the wooden enclosure made all the difference in the world from my plastic EON, which sounded okay, but somewhat sterile, not good at high volumes and had a tendency to overheat if I pushed it a bit. Anyway, thank you.
@TONEWARSgearshow6 жыл бұрын
Master6String you're so welcome! I'm so glad that our information here helped you. Isn't it awesome when you find something that works for you? Rock on buddy and enjoy dialing in the best tone you've ever had.
@ChadPhillipsMusic6 жыл бұрын
Thank you. My Helix never sounded better. Cheers!
@tomw19706 жыл бұрын
IMO the Mission sounded best but I realize that's not the point. Best doesn't always equate to accurate depending on how your unit is dialed in. Also sounding best would be subjective. Understanding that this is the point of this video I'm betting either it or the Friedman were the most transparent. I think it would be interesting to see each cab tested with a spectrum analyzer, each cab having pink noise run through them, same can position, same mic positioning and same DB level. Also it would be interesting to see if a cab could be made more accurate using the same procedure with a graphic EQ. If so then you could say this cab sounds like crap because it's mids are exaggerated in this range etc
@TONEWARSgearshow6 жыл бұрын
Tom White hey Tom, thanks for commenting. I really like what you said here. I would love to see analytics for these cabs/monitors as well. Like you, I want the most transparent FRFR cab I can get. Here's a video that I posted comparing my direct recorded tone to the cabs. Let me know what you think. kzbin.info/www/bejne/e5XGlXuKq8x2ha8
@dvscool6 жыл бұрын
This video has had a big impact on my choice. I think I'm sold on having a wood cab. Having played Mesa's all my life this makes sense....
@MrSchon15 жыл бұрын
I’m playing an ax8 through a Mackie mixer into 2-15 yr old Behringer cabs. Can’t imagine having a better sound for the money. Running everything flat and have used same settings in recording with no issues. God with all the available eq options only a minor tweak if any is necessary! If you start with a buzz saw tone, no speaker system will help you out much. Point is if your playing out your going to be playing through a P A. Surely your not going to just use FRFR cab.
@cooder2380Ай бұрын
Your middle eastern mix was awesome. Amp just needed a softer mid range.
@bobajobrobb9994 жыл бұрын
Just a thought... if you always play through the same foh speakers, wouldn't it make sense just to dial your tone into those?
@dryocum5 жыл бұрын
Absolutely true brother! That’s why I got my Friedman FRFR.... It’s also true for amplifiers as well. I play my Friedman BE100 through a Friedman 412 and the same goes for my Marshall, VOX, Soldano, Randall and other heads as well.. It’s like pairing fine wine with food... No one wants to drink milk when they are eating sushi...lol... I mean we all do crazy stuff like that....lol.. But, to get the best experience or in this case the best sound you want to use the best equipment you can. It has nothing to do with being a equipment snob. It’s all about your ears and a true flat response.... Great video!!!!
@Bri51506 жыл бұрын
I'm using a QSC K12.2 for my FRFR set to studio monitor. I am also new to the helix. At first the sound was way off, but reading, reading, reading... Found out I had to cut the lows around 100 and the highs around 8. I was told this is because a normal guitar amp speaker would never produce those frequencies, so if you don't cut them out, it sounds like crap. It's better, but still needs more work.
@MikeyGee0016 жыл бұрын
Gemini sounds awesome (personally I would dial out a bit of the WOOF) but at $1700 USD ... WOW !! That said, I wish you had an Alto in there since that is also a popular FRFR in the lower price range. I was surprised the Behringer did as well as it did considering the price difference from the Gemini
@sjsphotog6 жыл бұрын
Yes can you do a LOW PRICE shootout as my budget is
@prsplayer2106 жыл бұрын
I own the Headrush and my father in law owns the Mission gemini, we both like the Headrush better, and it costs 299$
@David13Rome6 жыл бұрын
I use a Gemini 1 and can testify that you are 100% right in your assessment of other FRFR's.
@TONEWARSgearshow6 жыл бұрын
DavidRomeRecording thank you!
@metalgear41994 жыл бұрын
To my ears, coming from valves and standard cabinets, Behringer sounds really good
@jasyynnoe83925 жыл бұрын
I've had good luck dialing in tone thru studio monitors (even cheap ones with 5" speakers). I was worried the first time I ran direct to a very nice PA (casino gig), but it sounded great, left the eq on the mixer flat. Later I did the same to a low end Peavey set up, and it only needed minor eq tweaks. My rig was set up faster than anyone else. I am looking to get a FRFR for my stage volume, though, and this video was very helpful.
@joe10032 жыл бұрын
we need an updated version with the laney lfr-212 and lfr-112 any other frfr cab since 2017 when this was made....and then the frfr celestion speakers in a 2x12 and 4x12 cabinet also would be nice
@garywaddell63092 жыл бұрын
I’m trying to figure out if I learned more about FRFR, beer or coffee 😂 great video on the FRFR topic, thank you!
@TONEWARSgearshow2 жыл бұрын
Haha glad you liked the video
@enricodedios25616 жыл бұрын
Listening through my AKG headphones the mission sounded great to my ears 2nd is Line 6 and 3rd is Friedman asc12. Thanks for doing this comparison...
@TONEWARSgearshow6 жыл бұрын
Enrico de DIOS youre welcome!
@MegaQwerty20006 жыл бұрын
Let me get this strait for studio applications you are taking a Kemper and your FRFR cab into a studio. Using your FRFR cab as a monitor and micing it to the studio board. Cant you just emulate the FRFR speaker cab sound at the Kemper or the board (IR) (throw some headphones on). If you can then you are just using your FRFR Cab as local monitor to hear your dialed in sound for playing live. Pushing air into a room while your standing next to your cab is just for your sake. What goes to the board is what matters. Or rather what happens at the board is really what matters.
@justinTime0773 жыл бұрын
You are a fool and a sack of butt nuggets. Your grammar is the cherry on top of that turd-pile of thoughts.
@Bognerman143 жыл бұрын
Your title says "Important" but for a second I thought it said, "Impelliteri." I thought maybe you were gonna give us an Impelliteri shred demo! Ha! Great video....
@GuitarsAndSynths5 жыл бұрын
Mission Gemini 2 sounded the best to my ears then the Friedman.
@peevee605 Жыл бұрын
What a difference between the Friedman and the Line6 and Mackie. No wonder sound engineers would be puzzled.
@vernonleemonii33346 жыл бұрын
This is a great video and explains literally what happened to me today at our practice today! I thought I had my sound/tones locked down & good to go here at my house, then leave to go to practice and all of tones sounded thin and tingy and high pitched like there weren't any Mids within the tones. Threw me for a loop and had to revert back to my previous pedal board to find out the practice. Came home and started looking into why and came across your video, glad I did! This helps understand alot more of what I'm dealing with! Thank you! Thank you! Thank you!
@TONEWARSgearshow6 жыл бұрын
Vernon Leemon you're very welcome! What speaker did you dial your tone in on?
@tomulator6 жыл бұрын
GREAT video! Thanks so much for putting it out there.👍🏼 Very “eye opening” and HELPFUL! 😎🎸
@TONEWARSgearshow6 жыл бұрын
Tomulator thank you.
@GuitarsAndSynths5 жыл бұрын
Very good analysis. The same holds true for beer. I use a good beer glass designed for high end Belgian microbrews and can taste the difference!
@mikeaustin41385 жыл бұрын
If you're trying to decide what to buy, you might consider getting a used Atomic Reactor. They make 2 tube-based FRFR models - the 112 and the 50-watt version. I had the 112 (18 watts) and sold it for the 50-watt version, primarily because the 50 watt version has more features. (I'm not a professional and 18 watts is loud enough to play with a drummer, so I didn't need the additional power.) Another option is the Laney IRT-X. This is designed to be an "expansion" cabinet for your existing amplifier, but it is FRFR and can be used stand-alone. It has some nice features and can sometimes be gotten used on eBay/Reverb. (I paid < $250 for mine.)
@TONEWARSgearshow5 жыл бұрын
Thank you for commenting. I've been trying to get my hands on the Atomic. Hopefully I will soon. Great advice!!
@pipelineaudio6 жыл бұрын
Thank you for this. Transparency, accuracy, and repeatability MATTER! For all the marketing towards pretengineers and guitar players, all the audiophile psuedoscience nonsense and myths designed to separate you and your wallet from reason, having as flat a base as possible to start with will allow you to make decisions with actual predictability.
@pipelineaudio6 жыл бұрын
Oops, should have listened to the whole thing before commenting. You went right off the flat earth deepend
@romeou49653 жыл бұрын
I'm more intrigued by the Tech21 Power Engine Deuce Deluxe with 1x12", on/off tweeter, wood build, rear breathing ports, HPF/LPF, 3EQ. anyone else try it?
@usta0286 жыл бұрын
I see that the Headrush FRFR-112 is pretty affordable. Will it be enough for "transparent" patch creation? It also seems great for smaller gigs.
@bearpitrock6 жыл бұрын
Completely new to FRFR. This was really useful. Thanks man. Subbed!
@TONEWARSgearshow6 жыл бұрын
cosycampbell thank you! Which FRFR are you going with?
@alfaalex1015 жыл бұрын
Great video, playing starts at 13:40
@tomulator6 жыл бұрын
One thing that would be interesting is to see how close you can dial in say...the Mackie Thump 12 to the Friedman. Many people who can’t afford a high end FRFR might be able to borrow one and “tone match” it...🤷🏻♂️
@echelecopao5 жыл бұрын
I would simply bring whatever amp or powered speaker I used at home to the gig/studio. Simply use one that has enough power, or if necessary get it mic'ed up at the gig along with the other instruments, amps, etc
@ericsmith72876 жыл бұрын
Convinced me. I like 2 of them, one for the dirty stuff and one for cleans. Thanks for the video.
@TONEWARSgearshow6 жыл бұрын
Eric Smith the mission cab was rrally good for cleans.
@PainterDans6 жыл бұрын
If your not using the same speakers as the studio your going to have to tweak your settings. Good video, it shows that even frfr speakers all color your sound differently. Same as guitar speakers.
@photocat375 жыл бұрын
What I got from this is 1) you “NEED” a flat response, full range to not color your sound and 2) all the flat response full range speakers tested here colored the sound in very different ways.
@TONEWARSgearshow4 жыл бұрын
The Friedman asc-12 were the flattest out of all of them
@christianpucciarelli4 жыл бұрын
TONE WARS the friedman sounded terrible!
@mberkerolcer4 жыл бұрын
@@TONEWARSgearshow if your reference tone is friedman asc12 - then i think best affordable and closest is behringer surprisingly
@romeou49654 жыл бұрын
That’s why studio monitors are the way to go. Kali LP6/8 are highly rated by helix/hx worship users
@doughitty63486 жыл бұрын
Thanks for the info dude. I am dealing with this now. I just bought the AX8. It's been a real pain just find a good tone. I absolutely agree with you on a wood cab. Have looked at the Engl, orange an Marshall 2 12 cabs. Also dealing with reackmount amp vs head. Like the BE 100. I bought the AX8 so I wouldn't have to spend 2 to 3 grand on a head plus a cab. Going to back off for a bit and let the sound come to me... Thanks again
@TONEWARSgearshow6 жыл бұрын
doug hitty my pleasure! I would STRONGLY recommend the Friedman ASC 12. Balls and transparency for days
@liquidsmokemustang15372 жыл бұрын
Very informative. The Mission Gemini sounded the best and most transparent IMO. Have you tried the Headrush 108 or 112? Would be interesting to hear those compared to the Gemini.
@LIKEFUNK2 ай бұрын
When I'm live via my unit, I'm generally sending my rockets into a 3 way and sometimes 4 way system with the crossovers set correctly to suit the system and environment, oh yes it separates the wheat from the chaff no problem.✅
@THALL01205 жыл бұрын
People dont understand what sounds good in the room usually wont work in a mix lol.Ive found it best to get the source tones through studio monitors.I had a mackie thump had to cut alot of the low end for it to even sound good in the room.If you want that real amp in the room tone u need a "Real wood" cab lol 2x12 is my fav.You could even just get a cheap 2x12 combo and just throw it in the return of the effects loop.
@TONEWARSgearshow5 жыл бұрын
I'm now using a Synergy SYN 50/50 power amp and 2 Mesa 2x12 cabs. I'm really liking it too.
@willman1002 жыл бұрын
Great video. What about a high quality PA speaker enclosed in a Baltic Birch cabinet?
@ksmit6 жыл бұрын
Love the analogies.....thanks for the demo. I'be been a cheap cabinet guy for so long.
@TONEWARSgearshow6 жыл бұрын
ksmit Thank you so much. I appreciate the kind words. Trust me, when you plug in to the Friedman, you will be blown away.
@BlueJazzMusic4 жыл бұрын
I'm a guitar nerd and I really enjoy your analysis of the gear. Finally a place I can go and get an accurate break down, both good and bad. This episode really hit home I have been using a Mackie DLM 12 and DLM 12S for my Helix and Roland GR-55. It sounded great in my studio and then I ventured out to the world and it sounded so woffy it drove me nuts all night. This video explains it. Thanks off to look at a Line 6 PowerCab 2-12... Thanks again.
@TONEWARSgearshow4 жыл бұрын
Thank you so much for commenting and sharing this with me. I'm so glad that my videos are helping people. I just reviewed the Line 6 powercab 2x12. It's actually a really good product.
@tanza146 жыл бұрын
great video just completely confused.. if 2 cabs are frfr they should sound the same right? or at least pretty close given the different builds.. the mission and Friedman sounded vastly different.
@TONEWARSgearshow6 жыл бұрын
tanza14 Thank you, I'm glad you like the video. I totally agree with you as well. They all sound different even though a lot of them claim to be full range flat response. Check out this video of me comparing each cab to my direct recorded tone. Let me know what you think kzbin.info/www/bejne/e5XGlXuKq8x2ha8
@p.c.10196 жыл бұрын
tanza14 I’m with you. Plus, if all eq levels aren’t set flat across the board, isn’t the tone being colored from the get? It’s super subjective. I’ll say this...the Mission and Friedman are likely the easiest to dial in, because of the r&d, and quality. You’re starting from a good scratch. Great video tho. Much appreciated. Kinda wish you would have said which ones got you closest to a hassle-free transition in a studio/live. Gotta guess it’s the Mission/Friedman? Thanks for the vid.
@danabnormal58925 жыл бұрын
Got a Laney LFR-112 for my helix. Great job
@TheBeechiebaby4 жыл бұрын
Dan has the Laney a wooden cab or plastic?? Tia
@josephforrest3713 Жыл бұрын
Sorry, this really isn't my area. What are we listening to here? Is the Freidman and the Gemini actual guitar speakers, and the rest are a mix of ABS PA speakers, and flat response guitar amplifiers? And if I'm sort of on the right track here... The cab sims are off with the actual guitar cab, right? How are they being powered, through a flat response reference amplifier? Again, this really isn't what I know anything about, so if I've completely got this wrong, I apologize. Or is the Freidman and the Gemini a flat response guitar speaker?
@TheIronWord6 жыл бұрын
spot on right here, i was misign that last 10% and i couldn't figure it out. Now im glad someone agrees. you need wood to replicate that tone.
@TONEWARSgearshow6 жыл бұрын
Thank you! Like I always say... Wood is good Poly, you on dat molly
@aholder44716 жыл бұрын
The mission sounds great but for that money, as a sound guy, I'd buy 2 qsc K12 speakers. They have a new model out now, the .2 series so the originals should have some good deals going on. Just my two cents. It's a beautiful can though.
@TONEWARSgearshow6 жыл бұрын
aaron holder thanks for commenting. I actually did a shootout with the Friedman and the QSC speakers. The Friedman sounded much better. Check it out and let me know what you think.
@TONEWARSgearshow6 жыл бұрын
aaron holder kzbin.info/www/bejne/nXLZg6Wgg9Wrrbc
@benburnett81095 жыл бұрын
Very interesting test. Great player, great sound, except for the mackie and line 6; those sounded awful. IN blind tests, The Behringer sounded best to me. The Freidman was awful out of the high dollar stuff----In my opininon. Here is what I did. I went to the 4 main clubs ( I live in a very small town in MO) and found out what equipment they used. All of them used a large board (behringer or mackie) and EV speakers/monitors. All had EV speakers and monitors. I could not afford EV so I bought the Powered monitors that sounded most like the EV's at a very loud bedroom volume. Not scientific but close enough. Going from a Freidman or MIssion to a FOH board/monitor/speaker setup would be disastrous in my opinion.Especially when you add in a board. In addition, NONE of the "sound guys" even knew what a Helix or a Fractal was and this was in 2017. I am sure in bigger cities this would not be an issue but it is here and I suspect in other small towns as well. I think if you approximate the setup used in your live venue, and work with that, you are in a better postion than working with Freidmans or Mission One, THEN going into a live setting. Just my thoughts. By the way, in all 4 settings, they asked me to "setup that weird shit" so I did. In addition, Accurate is a strange way of looking at this. I see what you are saying, though. Your Mesa should sound like a Mesa and a Marshall should sound like a Marshall. However; find me two of those amps that sound the same. I've tried for years. Two mesa's in a music store sound different every time. So in my long winded rambling opinion ACCURACY DOES NOT MATTER, great tone does. You can sound like a mesa going into a behringer just like you could into a EV/board. The idea is "similar" not identical. Great video and I love your channel And that guitar was absolutely gorgeous. ----Ben
@ExplicableCashew5 жыл бұрын
Silly question: would it make sense to take a reference track (Bohemian Rhapsody, Jesus of Suburbia, Master of Puppets, what have you, something that everyone is familiar with) and line-in it into each speaker? Shouldn't it demonstrate the flatness of each speaker in a similar manner to how people are testing studio monitors and headphones?
@TONEWARSgearshow5 жыл бұрын
That could be an option for sure. Some FRFR cabs only have XLR inputs though. Which may make it more difficult to do.
@ExplicableCashew5 жыл бұрын
@@TONEWARSgearshow Thanks for answering! I actually looked around for a video like this and couldn't find it...
@TONEWARSgearshow5 жыл бұрын
@@ExplicableCashew my pleasure!!!
@radmed979 Жыл бұрын
Thanks for the honesty
@redstripe41j6 жыл бұрын
I think you forgot option #4... Some people just suck at dialing in a good tone lol. Not necessarily always the engineer. I dig your tones so I'm not referring to you, but in general some people have a tough time dialing in a good tone because they don't know what goes into dialing it in right.
@TONEWARSgearshow6 жыл бұрын
StefanShredsabit great point! Actually @ 19:40 I mentioned that via text. :) Once again, that is a great point and I'm glad you posted this
@janbuyck15 жыл бұрын
I thought that the whole point of digital remodelling was just to go around stuff like miked wooden cabinet issues ??? ... just plugging in directly into the mixing table!
@potassiumchloride25424 жыл бұрын
No that’s not entirely true, the reason of modelling is to achieve different sound with one compact unit(helix). Instead of buying multiple amps, you have all the tone in one small device.
@TomiY16 жыл бұрын
Really looking forward to trying out the new HeadRush FRFR-112... supposed to be pretty damn good!
@SpectorEuro43 жыл бұрын
How'd you like it
@billwarner2133 жыл бұрын
GREAT video! Very well done - thanks for the great info!
@thecentralscrutinizerr6 жыл бұрын
Best bang for the buck: The Behringer.
@TONEWARSgearshow6 жыл бұрын
Central Scrutinizer I will say that the Behringer surprised me. Especially for the price
@ianlinder21686 жыл бұрын
The room acoustics play a really big roles in the differences between home and live/studio usage.
@TheVigilantStewards4 жыл бұрын
Yeah, the Gemini seems to sound very real. Does it translate very well/with a lot of accuracy? I thought that and the friedman were my favorites, but the Friedman seems to have so much midrange.
@TONEWARSgearshow4 жыл бұрын
They are both great products. Out of the two, I definitely prefer the Friedman though. in my humble opinion, the friedmen represented my direct recorded tone the best
@TheVigilantStewards4 жыл бұрын
@@TONEWARSgearshow Oh really!? Good to know, thank you. From what I could tell online I thought the gemini was more transparent. I'd prefer the simpler of the two and more accurate sounding, but also the one that is most fun to play in the room
@stuffwithjon4 жыл бұрын
Is the headrush frfr okay for homeplay? Why didnt you use it to compare here? Couldve been educational
@guille_toledo765 жыл бұрын
I was very impressed with this sound test. I feel very nervous, because I'm about to purchase a Helix LT , but I still have my Marshall MG 102 CFX and don't know how it's gonna sound or if I should connect the Helix to the return loop effect and switch off the cab block. Now I know for sure that a I need an FRFR speaker like the Line 6 Powercab 112, but It will have to wait, since I live in Chile and they are quite expensive 😟. Have you ever test a Headrush 112 BTW????
@tobster805 жыл бұрын
Question: so which of the cabs would you say is actually the most accurate? Because at the end of the video, you say that's the most important point, and that some of them didn't sound bad, but weren't accurate. So which of them is accurate, and the most colorless?
@TONEWARSgearshow5 жыл бұрын
I would say that the Friedman was the most accurate and sounded the best
@tobster805 жыл бұрын
Thank you! Very interesting comparison video!
@TONEWARSgearshow5 жыл бұрын
@@tobster80 my pleasure. Thanks for watching and commenting
@MartinCraneRockbeast6 жыл бұрын
I have found you need to break your presets into three groups. Practice, Recording and Live. And set up different sets of presets for each situation.
@TONEWARSgearshow6 жыл бұрын
Martin Crane what cab/frfr do you use to dial in your tone?
@MartinCraneRockbeast6 жыл бұрын
FRFR via powered pa speakers and a Blackstar iD core stereo 150.
@TONEWARSgearshow6 жыл бұрын
Martin Crane what speakers?
@p.c.10196 жыл бұрын
Martin Crane Perfect thoughts. Maybe the biggest flaw in all of this, is that some expect digital to transfer exactly to live/studio. Even then, I’ve never taken my Mesa Recto25 from my home studio, and didn’t need to dial in again at rehearsals/stage. Every environment is different, and every speaker is different.
@JamesBurwellActual6 жыл бұрын
Have you ever tried the Helix through Yamaha DBR12s? It's a plastic PA/Monitor wedge. Wanted to know what you thought of it as far as accuracy/consistency.
@TONEWARSgearshow6 жыл бұрын
James Burwell yes I have. IMHO, it's the best poly enclosed unit so far. It's not as dull as the others. That said, I st I'll ll prefer the Friedman. More transparency, rage and balls
@rondunn77816 жыл бұрын
Very informative! THANK YOU!!!!! This helps!
@ericsmith72876 жыл бұрын
I finally pulled the trigger on the one that I like. Thanks again for this video. I refer people to it all the time. Before I was building patches with IEMs or phones. Now I can actually hear the difference between each of the amps. Before they all sounded the same.
@TONEWARSgearshow6 жыл бұрын
Eric Smith my pleasure! What frfr did you end up with?
@jlondon536 жыл бұрын
Thanks for doing this. It does show me (and it's shocking) how different speakers, all claiming to be FRFR, can be. But I'm not sure this is showing me that one is actually better than another. While some obviously sound better than others (like the Mission), you don't say which speaker you used to create the patch/tone (I'm suspecting the Mission) to your personal liking. How good would the Mission speaker have sounded in this demo if you had created the patch/tone on, say, the Stagesource? What I'm suggesting is that whatever speaker is used to create the tone might sound a lot better in the side by side trial. Also, it's been my experience that whatever sounds good in your living room is 'still' not going to sound the same in a different setting. Regardless, I'm heading over to the Mission Engineering website soon as I finish typing this. Also I'm having high hopes for the new Line 6 Powercab 112 (or 212 when they get around to it). Again thanks. It was very educational for me.
@TONEWARSgearshow6 жыл бұрын
jlondon53 thank you. I'm glad you got something out of this. I also have high hopes regarding the Line 6 Powercab. I'll be reviewing it very soon!
@mikeschreiber93525 жыл бұрын
I too am in the fr cab dilemma. Friedman asm12, mission Gemini , or clear atomic. It seems in this video the Friedman is rather scooped and the Gemini a bit brighter. Personally I think in this video the Friedman was nice and warm but lacked some high frequencies vs the mission. So question is what was more accurate in this video for what you we were after. Friedman or mission? I am only looking for home use but I do want a stage level powerhouse and feel n the room. Thinking about two of whatever product I go with. Why not. 🤘Thank you for your contributions and time. Superb reviews my friend.
@jamesmiller98235 жыл бұрын
In your video the Friedman sounded more like a gutiar cabinet , but they are also more expensive than alot of other FRFR cabs out there. If you are looking for one to use in a live setting and have the money thats cool, but if someone justs wants one for practice I think they should check out something more reasonable priced like the headrush or alto
@TONEWARSgearshow5 жыл бұрын
I woul suggest studio monitors for home practice instead of the Alto or Headrush. They sound better and are more honest
@jamesmiller98235 жыл бұрын
@@TONEWARSgearshow Thanks for your reply, I will start checking into this then, I'm really looking for something to run a Amptweaker tight metal pro through for practice at home
@TONEWARSgearshow5 жыл бұрын
@@jamesmiller9823 that Amptweaker looks like a cool product. Bruce makes some great stuff
@davec69us2 жыл бұрын
If a sound person can’t mic you cab, and get the same or similar sound to FOH, then they are just not that good at their job. Assuming your tone coming out of that cab is good, their mic should hear the same thing. Problems occur when they try to take the FOH signal from your devices main L/R outs. No wonder it sounds like crap. The player has probably never heard it until today. So the options? Only use your devices main outs to create, tweak and edit your patch/presets. You can then tweak your onstage cab/monitor (not your patches) via eq/volume/ and other settings, to sound good with those tones. Now everything is in sync, so it doesn’t matter if the sound person takes his signal from the line outs, or mics your cab. They should both sound good.
@GtrMan8633 жыл бұрын
Last year my band played a lot of shows until the virus, my friends and family complained not about my playing but about my tone I was using a Headrush powered speaker, as I had time off from work I made some adjustments to the hi and lo cut of the speaker cabs in my Helix not sure if it helped because I haven't played out, the band I was in would get pissed if I plugged into the house so I only did a few times, I got a Katana ii and there is a amp input for guitar processors, is there anything else I can try? love this channel
@michalmikolajmaslowski39946 жыл бұрын
Thanks for the video, I leally liked it. I'm pondering a Friedman ASM-12 with Ace-FX III going along with a Majesty Monarchy. Given the concerns that you've addressed in the video, does this sound like a reasonable platform? I am specifically asking in terms of the actual FRFR model choice for and the modeller. Thanks!
@TONEWARSgearshow6 жыл бұрын
TheToneZone the Friedman will be a perfect match for you. Transparency, punch, headroom and clarity
@michalmikolajmaslowski39946 жыл бұрын
Thank you very much for your reply. I hate to be asking, but how would you view it relative to a Gemini Wedge (if you have had the pleasure of using the latter), tonally speaking? Entirely subjectively speaking from my angle here, I find a lot more pronounced sparkle, or the high-end in the Gemini when compared to the Friedman in question. Thanks for your time, and keep on rocking!
@TONEWARSgearshow6 жыл бұрын
TheToneZone you're very welcome. They are both fantastic products. If you play modern metal, djent, prog and heavier type stuff, the Friedman would be more what you are looking for. If you're playing more classic or blues or jazz then go with the mission.
@michalmikolajmaslowski39946 жыл бұрын
Thanks!
@sjsphotog6 жыл бұрын
WOW that Line6 FRFR sounded like C-R-A-P and for the $$ they want for it...wow. Great comparison. Im looking for a FRFR for my home hobby use at home (not live/not pro gigs outdoors/not studio) to use with my Line6 Firehawk FX guitar processor for electric and acoustic guitars but am on a tight budget of < $350 so what is the best home/hobby use FRFR out there? any ideas? Better to just use 2 stereo powered monitors? or a cab/wedge PA? thanks for your feedback. B
@TONEWARSgearshow6 жыл бұрын
The Line 6 FRFR in reference mode is decent. The guitar mode SUCKS! To your question, if you're on a budget, the Mackie MR6 mk3 studio monitors will work great. They provide great stereo imaging and transparency. You are much better off with the those rather than a substandard wedge. I love mine.You can get them here - www.amazon.com/gp/product/B00EA1W1M0/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00EA1W1M0&linkCode=as2&tag=tonewars-20&linkId=a75122b74eb94ce57a2874956ccac058
@alextavera7416 жыл бұрын
TONE WARS have your tried Yamaha HS7 vs Mackie MR6?
@markpabst79635 жыл бұрын
Check on the new Headrush FrFr..... sounds incredible, will work great for you and has the shocking price of only $300. This unit should be going for $799 easy. Check out their website HeadRushfx.com these things are unreal for the price. And they go to 11!
@TONEWARSgearshow5 жыл бұрын
@@markpabst7963 I just did a shootout with the Headrush a few weeks ago. Check it out
@speedriff5 жыл бұрын
So which do you find gives you a reference sound? I’m assuming it’s the Mission Gemini? I say this because to my ears all the others sounded, well, not so good. Great video and yes, you need a speaker that will translate to accurate FOH unless you are just going to mic the cab.
@TONEWARSgearshow5 жыл бұрын
I found the Friedman to be the closest
@duaneharlick6 жыл бұрын
So, given that all of the "FRFR" offerings in the shootout sound VASTLY different, there is obviously coloration across the board. How do you determine where transparency lies?
@TONEWARSgearshow6 жыл бұрын
Duane Harlick great question. To be totally transparent myself, this wasn't a shootout between FRFR cabs. It was a shootout between FRFR cabs and commonly used monitors. The Friedman and the Gemini cab were the only FRFR cabs in this video. To your great question, use whatever FRFR cab that is closest to your direct studio tone.
@robgroden6 жыл бұрын
Is the L6 an FRFR?
@TONEWARSgearshow6 жыл бұрын
Rob Groden no. It's a decent speaker for FOH. If you're gonna use it for FRFR keep it in reference mode. The guitar mode sounds awful. The Friedman is a true FRFR and has balls for days!
@robgroden6 жыл бұрын
TONE WARS Thanks for the reply. I purchased it thinking it was FRFR as I had seen a ton of people suggest it. I’ve recently started running it in reference mode, I was letting it default to floor monitor mode originally.
@duaneharlick6 жыл бұрын
This past weekend I spent time developing tones using Bias FX/Bias Amp on my iPad with a great set of multi-driver headphones. I did a gig NYE with the iPad straight to the board (using a DI) and the results were great. So I can see the value in using a "transparent" sound source to develop your tones. That way, they carry over wherever you end up using them.
@wj744 жыл бұрын
13:40 for start of comparison
@JFRiley5 жыл бұрын
Great video, thanks (and subscribed!) I’m just starting to learn about these new gen multi effects boards. My last one was a Boss ME something from 2004. Now I play a mark v with full pedal board set up. What are your thoughts on getting rid of the pedal board but running a helix or fractal into a Mesa amp using 4CM?
@TONEWARSgearshow5 жыл бұрын
Thanks so much for subscribing! Regarding your question, go for it. I run my helix via 4cm with my Synergy rig. It switches everything and gives me great fx.
@howardronan13393 жыл бұрын
you prolly dont care at all but does anyone know of a method to log back into an Instagram account..? I somehow forgot my login password. I would appreciate any help you can offer me.
@dakotalayne77173 жыл бұрын
@Howard Ronan instablaster ;)
@howardronan13393 жыл бұрын
@Dakota Layne i really appreciate your reply. I found the site on google and Im waiting for the hacking stuff now. Takes a while so I will reply here later when my account password hopefully is recovered.
@howardronan13393 жыл бұрын
@Dakota Layne it worked and I finally got access to my account again. I'm so happy:D Thanks so much you saved my ass!
@SteveKuhMusic3 жыл бұрын
Thanks for this video. The difference between the expensive and inexpensive speakers is stark. Are you saying that when you dial in what you’re looking for on a true FRFR at home, then that tone will transfer accurately to FOH (subject to minor tweaks)?
@TONEWARSgearshow3 жыл бұрын
That is correct
@opzouten6 жыл бұрын
So basically all we can learn from this is that speakers sounds different and that you don't like speaker made out of plastic (and btw you can make great speakers from other materials than wood). The viewer still have no clue which speaker works the best. If you want to know which speaker is most transparent you need to use a proper measurement setup in damped or anechoic room using flat response measuring mic's (or you could measure windowed chirps to remove reflections). This would provide knowledge about the speakers and an explanation of why they sound different. The least you could do is to provide a list of used equipment as well as description of the setup.
@justinTime0773 жыл бұрын
He made it very clear what was being used you *turd bag*
@sjsphotog6 жыл бұрын
Hey nice Dream Theater t-shirt. Petrucci and DT are my fave. The Astonishing tour show was un-freaking! believeable. Superb sound, visuals and lighting show to say the least. One of the best shows I saw. Not their best album and not my fave but a great show. DT forever!
@TONEWARSgearshow6 жыл бұрын
Stephen Soukup I'm a total DT nerd. JP is my boy!! You're correct, that tour was amazing. I was leaning on the stage 3 feet away from Petrucci the whole night. We did the meet and greet as well. I'll never forget that night.
@RyanWright5 жыл бұрын
well, from my blind listening to this video, sounds like I need to look into one of those Behringers. Sounded nearly as good as the expensive options (Mission and all) but I'm sure it is way less expensive. I'm sure your goal was to point out that you need a wood cab, but I didn't hear that in this blind test...
@gregcapra48686 жыл бұрын
What do you think of Splawn cabinets? I don't believe they offer FRFR speakers/cabs, but I've heard good things about their designs. I own a Kemper and am considering either a Headrush FRFR or a Splawn vertical 2x12 with Celestion Creambacks. Mission is so fucking expensive. $1600? I just spent $2600 on the powered Kemper lol. Please let me know your thoughts.
@TONEWARSgearshow6 жыл бұрын
Greg Capra I appreciate your question. I haven't tried the splawn vertical cab. If you want a really good FRFR option, I would suggest the Friedman ASC 12.
Are you on Facebook by any chance? The reason I ask is because I've narrowed down my next cabinet purchase between the new LINE 6 POWER CAB 1x12 & the SPLAWN VERTICAL 2x12. One conclusion I've come to is that (for example) if you own a KEMPER & have Cabinet Emulation turned on & then have your cabinet mic'd, it has a 99% chance of sounding like shit. Based on the profiles you have stored & programmed in your Kemper will determine how rich or shrill-sounding they are. The 2nd half of the tone battle is EQ'ing those respective profiles to the best of your ability & preference. From my personal experience as a performing guitarist & musician, if you have Cabinet Emulation (the Cabinet button on your Kemper) TURNED ON & you're plugged into a PHYSICAL CABINET & that Cabinet is MIC'd, you're profiles & overall tone is most likely going to sound like SHIT LOL! So, suggestions: Choose 1-10 of the most useful, rich-sounding clean, over-driven & distorted profiles. Save & assign them accordingly via Rig Manager & to your Profiler Remote (Floorboard). Whether playing @ home or live on stage: If you have CABINET turned on (CABINET BUTTON LED LIGHT IS ON) & you're connected to a physical 1x12 / 2x12 / 4x12 / FRFR > TURN THE CABINET BUTTON OFF & NOTICE IMMEDIATELY HOW MUCH BETTER, FULLER & CLEARER YOUR PROFILES SOUND. The CABINET button makes sense to turn on when you aren't connected to a Cabinet & you are practicing with headphones on. Then it will give you that "AMP IN THE ROOM SOUND." I want to personally thank TONE WARS because if it weren't for this video, I wouldn't have been enlightened on the concept & technology of FRFR (FULL RANGE, FLAT RESPONSE) speakers & acoustics. MY FINAL QUESTION TO THOSE READING THIS: I'm torn between purchasing the LINE 6 POWER CAB 1x12 & the SPLAWN VERTICAL 2x12. The 2x12 has 2 speakers (obviously), heavy duty handles, takes up less space in your room & on stage & has Celestion Creambacks. The Line 6 Powercab 1x12 "Does for cabinet emulation what the Kemper does for amp profiling" in that it has 5-10 profiled speakers. Sorry if this was a long post, but hopefully this will be helpful to those reading & maybe I'll get suggestions to the future purchase I intend to make. Happy Reading & Rock on Ya'll!! facebook.com/gcapra81
@bailey124445 жыл бұрын
The line 6 played through the line 6 link with helix is better I think that’s how I run mine cheers great video bro
@TONEWARSgearshow5 жыл бұрын
Thank you!! The line 6 speakers are definitely pretty good in PA mode.
@bailey124445 жыл бұрын
TONE WARS I love the sound of the mission , I would like to see it vs the atomic clr
@Nick-ox6gz Жыл бұрын
i had a kemper cabinet, n i wish to upgarde to friedman ac12, is that ac12 much better than the kemper cabinet..? 😊
@TONEWARSgearshow Жыл бұрын
I'd stick with the kab
@briandgr8st5 жыл бұрын
I have a question. What is Line6 L3M “reference setting?” And Line6 L3M “ele guitar setting?” The “ele guitar settting” sounds lightyears better than reference setting. How do we get that kind of setting? Thanks this video has helped alot.
@TONEWARSgearshow5 жыл бұрын
The settings are on the back.of the speaker
@mberkerolcer4 жыл бұрын
IMHO - with a very tight budget for home-studio setup - and - to get ready to terrible PA systems - the best option is to have a studio reference headphones (really flat ones, like Beyerdynamic etc.) So this way, you can set your device or software tone with your headphones. You can trust your tone, dial the system EQ to get it to the closest possible point. Any type of speaker (Even Behringer) or studio's or venue's shitty or good PA system or speakers, you can get at least an OK tone this way. I am in the market for a powered speaker for home and home studio with drums, and I have a very tight budget(i am considering behringers). But I have an audio interface and beyerdynamic headphones. Even Behringer is not bad, you achieved to get a close tone to your reference tone. But you will need a reference tone, headphones are just for that. PS: I think wooden cabinets add their character to the tone but their tones are fantastic. (you should close the cabinet sim) If you take wooden frfr as a reference, you can have some problems with shitty PAs. What do you think?
@kristofkolosnagy91522 жыл бұрын
Any info on the Tech 21 Powe Engine Deuce Deluxe?
@aic925816 жыл бұрын
So, I have a Kemper 600W powered head & just recently learned about FRFR technology. I'm looking to get a new 2x12 cabinet. Either a Splawn vertical 2x12 with creamback Celestions, a Mission 2x12 FRFR cab or a Headrush FRFR Floor cab for $300. What do you suggest & why? The Mission is good, but it's fucking $1600 lol.
@TONEWARSgearshow6 жыл бұрын
aic92581 have you tried the Friedman ASC 12?
@juanvaldez54224 жыл бұрын
How do you feel about the powercab ? I pulled the trigger on a kemp head and remote even though I been using helix but I’m going to need a frfr being I have been using the helix 4cm with a tube amp. Also, have you used the kemper with a tube amp? Like going in the amp effects return to utilize the power amp section?
@TONEWARSgearshow4 жыл бұрын
I think the kemper sounds best when he run it through a tube power Amp and real cab. It shines big time. I actually think the power cab is a decent unit. That said, the Kemper Kab is more suitable for the kemper because of the features that it has. It sounds really good as well. Keep in mind it's not powered though.
@juanvaldez54224 жыл бұрын
TONE WARS do you think it sounds ok ran through the power section of a tube amp via effects return then into cab? Thanks for responding . Nobody in KZbin , but you and a few, talk any about how to actually route the kemper or the helix
@TONEWARSgearshow4 жыл бұрын
@@juanvaldez5422 no problem. Yeah it sounds great if you run it thru the return of an amp head
@rangerdoc10295 жыл бұрын
The right FRFR for me is the one I can afford, which sadly is an old PA speaker.
@Obssy4 жыл бұрын
Same here, but after some research I decided to get the Laney LFR 112. It hasn't arrived yet, but I have high hopes.
@TheLaw16 жыл бұрын
Do you run your impulse responses into the Friedman/Mission cabs? If so, why? Wouldn't that be like having a large cup of coffee, then you put a smaller cup of coffee inside the bigger cup before you will drink it?
@TONEWARSgearshow6 жыл бұрын
The Law I use ownhammer ir's. And I tried bypassing the ir and it sounds like static mixed with aids.
@corymoore50935 жыл бұрын
What was the cab sim you were using? That's what is really important here. How accurately does the FRFR reproduced the cab that is being simulated
@TONEWARSgearshow5 жыл бұрын
I believe I was using an IR from the Ownhammer HHVII series. The Friedman definitely presents the difference cab sims very well
@nnalujim78484 жыл бұрын
The Behringer sounds the best. Cheers.
@mtemp2086 жыл бұрын
I get where you are coming from with the wood vs plastic but, two things: what are studio monitors made out of? what are most pa speakers made out of? I just want to make sure my Helix sounds good live at church through the house system, which is NOT a guitar cab. I want to sound good through studio monitors and venue house systems. I don't really care how accurate the sound is to "amp cab." And thus far, by dialing in my tones on my studio monitors, I've been very please with them live, and found my tones translate very well. I'm ordering an Alto TS210 which again is a PA style speaker, yes. But thats fine because I want my tones to sound good through a PA, not through a wooden guitar style cab. Does that make any sense? What are your thoughts on that?
@marcelblade6 жыл бұрын
Marc Tempesta exactly my thoughts on the subject, I want to to get as close as possible to the sound coming out of the Pa.
@TONEWARSgearshow6 жыл бұрын
Marc Tempesta Marc Tempesta thank you for your response. Studio monitors (especially good, hi quality flat ones) are certainly a good choice. The only things they lack are balls size of sound. Just try not to overcompensate for those things and you'll be fine. That said, I wouldn't recommend dialing in your tone thru the Alto ts 210's. Use them only as a playing reference. Always dial in with flat speakers, always. If it sounds good through a flat speaker, it will sound good everywhere unless the speakers you're playing through are junk. This way, your tone will not be the culprit, it will be the speaker that you're playing through. If you cook fish in a Pan and without cleaning it, immediately cook pancakes in it afterwards, what are they going to taste like?
@TONEWARSgearshow6 жыл бұрын
Marc Tempesta also, most good studio speakers are wood encased. PA speakers? Some wood, some poly.
@epiphonevermelha5 жыл бұрын
Great video. I'm completely new to digital gear. I bought a line 6 hx stomp for use with amps modeler only. I am currently using the stomp on the return of the laney Lionheart 5w combo FX loop but I am not completely satisfied. I would like to try a FRFR cab. I'm undecided between Headrush cab and line 6 power cab 112. What would you recommend from these two?
@danabnormal58925 жыл бұрын
Paulo Madeira I use a Laney Lfr-112 with my helix. Fantastic frfr cab for reasonable cost
@2204JCM3 жыл бұрын
The only part I disagree with is the “Wood Cab” part. Adam near filed monitors sound excellent and they use MFD. The important part is that not all FRFR are really as linear as they make you believe. The bottom line here is you get what you pay’d for. Imagine spending 4 grand on a Soldano SLO and plugging it in to an old Ibanez Tonemaster 4x12. Sounds dumb right? So why would you think its ok to plug an Helix or Axe FXIII into a $300 powered monitor?
@michaelperry24466 жыл бұрын
GREAT VID! I AM JUST NOW LOOKING AT FRFR OR STUDIO MONITORS. I AM WANTING TO BUILD MY OWN CAB WITH AN FRFR SPEAKER. CAN U RECOMMEND A QUALITY SPEAKER AND SET UP? THANKS
@shanewallace42946 жыл бұрын
Should call this guy Mr. analogy😉
@TONEWARSgearshow6 жыл бұрын
Shane Wallace You're not the 1st person who has said that lol. If I was a superhero, I think my name would be "Analogy Man"