Too Much Silicone Gasket Maker in your SeaDoo Rotax Engine? + Motor Tear Down + Calas Tech Tips

This motor has way too much Silicone.. Today I will explain, and show you why too much silicone is bad for your Rotax motor.
Lets see wha happen!
Be sure to follow me on
IG - / calasperformance
FB - / calasperformance
Check out my Website
Calas Performance www.calasperfo...
Check out DDR Performance
ddrperformance...
Check out the fizzle factory
www.fizzlefact...
#calasperformance
#seadoo
#fizzle
#ddrmarine
#pwc
#jetski
#calasWorld
Director/Video Editor/Producer/Drone Pilot/
Dessie Vizcaino

[@xylol412]

I’m not a 4-stroke SeaDoo guy, but there is so much to learn from Calas. There should be many more subscribers to this channel than there is. Good work, and very informative!

[@pete4275]

Thanks mate. Loved this video

[@tiptoplandsolutions1421]

" Last Stanza" 🎉💪

[@tiptoplandsolutions1421]

Awesome channel..I learn mucho..! Thx a...

[@ac9928]

tim rebuilding a 717 right now and was just googling this @6:14 HAHAHHAHAHAH

[@hectorlriveravelez3979]

Im not a mechanic but with all this tutorials Im about to work on my own motors.

[@evanhoffman1792]

Best videos ever fearless!!!!!!!!!!!!!!

[@jordigrau3625]

Great video !!!! Thank you Ernesto

[@andreteixeirapsg]

Nice video Ernesto, we tank you💪🏼💪🏼

[@Alexsoutdooradventures]

Hector the engine stand lol

[@brucecooley4170]

Stan the stand

[@jeramiebentley4054]

You could replace 100 friends with one guy like calas.

[@Tassie1966]

Another great video keep up the good work i love watching your videos from down here in Hobart, Tasmania.

[@wallstreetsupreme4626]

The engine stand should be named Walter after myself. Ability to hold a load for a long period of time, be patient and wait and still remain reliable. Lastly, the stand waits on Calas but Calas never has to wait on the stand (just like Walter 😉). So there. Name the stand after me 🫠

[@RXT-X]

Gracias por tus videos eres un apasionado de tu trabajo y aprendo mucho de tus videos 💪💪💪

[@palmettocarpetmiamiROBERT]

Engine Stand- palo trancado

[@dReMiXeDg]

Tio Ernesto 😂 keep up the good work

[@cpcassone]

Name the engine stand “The Operating Table” because the engines undergo emergency surgery from Doctor Ernesto!😂 every time I hear ernesto’s voice all I hear is when he was talking about his harbor freight compression tester and needing to use his friends for better accuracy! I love when he uses the deep voice! “My friend has a snap on!” (In the deep voice!) 😂 please say it again next video!

[@fredericosanchez5318]

NO MAMES WEY!!🤣🤣 Great Video man! Very Informative! So many mechanics make this mistake with using too much Silicone. Then they get it in "la pinche malla" 🤣🤣

[@jorbedo]

You should have a big shop and a team selling custom pwc's and repair shop. I will trust you more than a dealer!

[@codyswartz997]

That engine having the CB off with the increased vibrations would also contribute to an increase in bearing wear. He is correct the more fuel you dump into an engine the more it can mess up the oil

[@robertomedinaj7090]

Great stuff man I don’t even own a jet ski but love how you explain and put out there your knowledge I want to get one because all of my motorcycle buddies are getting jet ski’s, Will love to see a video of what to look for in a use well maintained ski or is it better to buy a new one

[@erypirata3749]

Hayyyy mi madre 🤦🏼‍♂️🤣🤣🙏🏼🙏🏼🙏🏼

[@johnnyringo2550]

Another Great video 👍🏼 I wish I knew how to tear them down and rebuild them like that 👍🏼 , Greetings from Austin Texas 🇨🇱 . Lake Travis . Sea Doo Life 🌅

[@robertgerrard6609]

Ernesto your Stands name should be john boy. its beat the ef up but strong as an ox lol. also the disposable roller from the dollar store is perfect for applying the sealant for the cases. cost is 1 dollar lol

[@longjonsilvers802]

We need a Part 2!

[@geneabsherjr.9654]

Great info. Thank you for sharing your knowledge. Love the channel.

[@badm0t0rf1ng3r]

I always stress with my junior mechanics that its INCREDIBLY important to use a little as needed with gasket maker, ALWAYS ALWAYS ALWAYS make sure you use hand tools when installing sensitive bolts. Never use an impact when the instructions call for torque wrench!

[@gulfcoastjetskis]

In the USMC, we always called stands similar to that a "hotrod". Go get the hotrod

[@krankysledzz]

Gotta luv watching Ernesto . But dude don’t time lapse the video or Ernesto will fire your butt. 😂

[@omarcotto7851]

Transformer's Stand

[@juancottojr699]

Name the engine stand The Hulk!!!!

[@trtr9951]

Love the video! I am learning from your content. Thanks for the awesome video!

[@theoddjobs3749]

Name the engine stand “little Calas”

[@bradymacaraig6638]

Engine stand name: "The chopping block"

[@marcojimenezgoliasch1108]

Hello I love your videos and I learn a lot. How many hours can my 2013 seadoo gtr 215 do. It has a 560 hours now Thanks

[@davidbalan6571]

If the silicone has cured and it's brittle then you have probably use to much cataylst during the process .

[@erossiiv]

Franken-stand

[@jbaccord]

Question: after replacing the throttle body on a 2016 RXPX 300, would the throttle body need a calibration using can doo or buds?

[@David-dg3kb]

Great stuff. Love these videos. Always curious with how and why these motors wear and fail. (Modded rxp215 459hrs still running strong)

[@paulpuglia8480]

Name the engine stand Buster.

[@jasonmekush5280]

name for engine stand : " the silver fuse..."

[@aristidesroman435]

I have 2022 RXP 300 MILLEMIIN YELLOW did you have stage 2 Avaliable ???

[@IRantweekly]

With what u said at 5:30 someone impacted drilled TF out of my head valvue bolt and bent it, Took me 5 full days playing around to finally get it out to find it bent, also just thought it was just corroded real bad! Good Video.

[@01dubai]

Clutch stand 😅

[@calasworld]

🤦‍♂️😂😂😂

[@brianjohnson2483]

"FrankenStand"

[@kylepurdy9137]

Engine stand = EL Chapo!

[@derargentinier8879]

Bueno por lo menos no perdía aceite con tanto ultra grey 😂

[@T-K---]

Hello Calas, after how many hours you recommend changing oil on stock jet ski? Nice video ! thank you

[@calasworld]

Hello my friend on a stock JetSki you can go with the factory recommendation Which it will tell you know maintenance required on your dash

[@mandrakeelmago1770]

La pinche bomba de aceite tiene metal en la malla! NO MAMES WEY! 🤣🤣🤣

[@fredericosanchez5318]

Haha no mames wey🤣🤣🤣

[@chasefalgout9467]

Engine stand name: Standy McStandface

[@godfatherstilllives5327]

Would you recommend using liqui moly Marine oil. I have a 2016 RXPX 300 ? Thanks for all the videos you provide!

[@calasworld]

I saw their booth at the World Finals last year at Lake Havasu. I’ve heard good things about their product from other shops but I can not give you an honest answer I have not tried their products.

[@godfatherstilllives5327]

@@calasworld what type of oil do you use? I do know you have to be careful what type of oil to use so you don’t damage the super charger. I guess I have some research to do

[@simonmusicka5552]

Hi Ernesto I’ve just bought a 2006 rxp supercharged with 190 hrs would you recommend changing the cam gear bolts and flywheel bolts it has a good service history with it

[@calasworld]

If you are keeping it stock, don’t touch it if you doing any type of performance yes, I will change the flywheel bolts

[@simonmusicka5552]

@@calasworld thanks I’m keeping it standard

[@TheMarnell35]

“Old Standy” ….

[@fredhayden9011]

"Standly"

[@miguelvelazquez7952]

Como ay muchos mecánicos que no saben bregar con motores sea Doo 😂😂😂

[@AchikSarih]

Merci beaucoup ❤❤❤❤❤❤❤❤

[@johngroff7601]

Thank very much for this episode. One question Did you have to do anything for the For the surfaces of the cam bearing in the head.?

[@calasworld]

No there’s nothing to do. There is no bearing on the Seadoo head. if it’s messed up, you have to get a new head.

[@cday6160]

Name it Standley.

[@montneymon-ta-knee6810]

what is pinning the crank

[@beauchamp81]

hey Calas do you rebuild honda aquatrax motors?

[@calasworld]

No sorry

[@Deighty181]

When reinstalling the engine , do you always use a engine alignment tool?

[@calasworld]

No

[@hectorsanchez9628]

There not a single video where I dont learn something new!!

[@TonyVielguth]

Do you only run OEM oil or do you use another brand?

[@calasworld]

@@TonyVielguth yes OEM, but if I can’t find it, I’ve used Rotella on the past

[@DessiLu14]

Frankinstand

[@jetskiangel]

I have doo2021 it left me in the water 2 times but it doesn't turn on I changed the relay to turn it on but it came back and it was the same after I used it 4 times I took it out of the water I took out the relay I put it on and it turned on that you think it can be the problem?

[@davesmith2733]

Use nil none awful stuff inside engine