I just bought my first jetski (seadoo gti 130) and I love watching your videos.
@erossiiv Жыл бұрын
Glad to hear that your business and KZbin Channel is growing. You do a great job of showing how to do these things with Sea-Doo's
@johnnyringo2550 Жыл бұрын
As always Great video ! I wish that was my motor 👍🏼 greetings from Austin Texas 🇨🇱 Sea Doo Life 😊
@SaltyDogPerformance Жыл бұрын
11:36 love the glovebox cover cut and drawn on to look like “The Mask” on the wall lol
@Boostedzc Жыл бұрын
I can watch engine build videos all day. Great job and explaining it very clearly. Love the channel. ❤
@derargentinier8879 Жыл бұрын
faaaa master class !! grande ernesto !!
@fredericosanchez5318 Жыл бұрын
Very good and very informative. I absolutely love all the tech Tips on all your videos. I always learn something on every video you post. Thank you Calas. Aka Sea-Doo Master!
@brandonhenderson7020 Жыл бұрын
Ernesto love your channel thankyou for sharing with us
@timkimes96 Жыл бұрын
There is a lot of good detailed info in this video! Keep up the good work, my friend!
@andreteixeirapsg Жыл бұрын
The best !!!
@luistejeda3570 Жыл бұрын
The light💪🏻
@waynespears56648 ай бұрын
The Master at seadoo engine builds.............................................................................Fort Worth,Tx
@godfatherstilllives5327 Жыл бұрын
You make the most informative videos, as a technician my self it’s awesome!! I wish our Canadian dollar wasn’t so low in value I would love to buy our camshaft and your other parts
@joe-yj6du3 ай бұрын
Outstanding video...appreciate your dedication to teaching and passing along your tips and trucks. It is much appreciated my friend!!!
@scottr3141 Жыл бұрын
I've rebuilt maybe 75 engines over the years, and one thing I always do is Plasticgauge the main, and rod bearings before I close it up. I've had so many machine shops screw up my cranks, and cylinder specs for new pistons. And I used a couple top race engine building shops all over the country, and they still screw up things. I don't trust anybody's machining work these days.
@jetson328 Жыл бұрын
Another fantastic video Thank You
@countyracing46743 ай бұрын
Appreciate the knowledge. I know it takes a lot just to do the work. But to do the work and make the films plus everything else takes way more. So thank you for this!
@k9sgarage301 Жыл бұрын
Please make a video on how to install a cam, and springs with the motor in from start to finish
@DevonSpittleREAL Жыл бұрын
Thank you for this 👍🏻👍🏻
@jesusmelo1472 Жыл бұрын
🤩🤩thanks for all you great work,happy for you channel and business doing great 😊. Any yamaha re-build in the future.
@jesusmelo1472 Жыл бұрын
?
@calasworld Жыл бұрын
Absolutely as the channel grows, we are going to do different projects
@chadwendorf5103 Жыл бұрын
Love the content. And as always, it is very informative. Keep the videos coming.
@pacman7877 Жыл бұрын
Tremendo contenido siempre!! 🎉🎉🎉
@robertkp898 Жыл бұрын
Super odcinek
@enriquetobar11458 ай бұрын
Thanks Ernesto as always, love your videos
@T-K--- Жыл бұрын
Thank you sir !
@RXT-X Жыл бұрын
Gracias por tus videos me encantan mucho 🙏💪💪💪
@galanonim70195 ай бұрын
OK. All nice looking BUT what about a NikaSil surface ? It is all gone ,,, so this engine will work but for how long ???
@texasrider56213 ай бұрын
Good video enjoyed it thank you I’m not a Sea-Doo guy. I’m a Yamaha guy, but I still enjoy the video.
@calasworld3 ай бұрын
@@texasrider5621 patience, my friend I will be making a lot more Yamaha Contin
@johngroff76014 ай бұрын
I am building a 2011 RXT 260. I am using the same Wiseco Pistons. Do you have any recommendations for ring end gaps size or should I say Tolerance.? Or should I go by manufacturer tolerances? Your input would be greatly appreciated.. I've learned a lot from you in this present build, and I'm doing. Thank you again, and i look forward to your response. Keep up the good work.
@SaltyDogPerformance Жыл бұрын
17:32 people will still try to argue that timing is “retard”. Thanks for pointing that out to people!
@davidtheriault1398 Жыл бұрын
Merci!
@SaltyDogPerformance Жыл бұрын
What is the part number for those Wiseco pistons? Are they 100mm that are for the 1503 engines and 8.4:1?
@alfredojdecastroo12067 ай бұрын
Hola Ernesto, tengo dos rxpx 300 uno es 2022 y el otro 2023, tienen muy pocaas horas de uso, menos de 15 cada uno, pero no llegan sin cerca a la velocidad que dicen en internet, como vivo en colombia no les he podido hacer el reset del aciete, pero a las 10 horas se los cambie, sera que la falta del oil reset los esta afectando en la velocidad final,,, gracias
@aamotorsportsnc56154 күн бұрын
great video, thanks for all the info, one question this is a 1630 engine?
@WizMurDer Жыл бұрын
how much oil do you put into the engine? after doing the engine swap?
@ThomasShue Жыл бұрын
Where do you order all the parts for seadoo’s
@ВладимирКлюев-г1с Жыл бұрын
Hello, please tell me, I bought the block head, apparently it was overheated, as you said, the shaft on the last neck bites a little, what is your opinion, will it work? Thanks
@calasworld Жыл бұрын
It’s funny you ask that my first Seadoo 07 Rxp was like that and it ran 93 mph back on 2013 you’ll be fine
@moonguar7 күн бұрын
What’s your piston to cylinder clearance using the Wiseco Piston?
@johngroff76015 ай бұрын
Thank you for all your video's. Really do appreciate it. Where do you get all your arp bolt stuff from?any info would be great thank you
@calasworld5 ай бұрын
I have everything in stock
@calasworld5 ай бұрын
I will be putting ARP and more new products in calasperformance soon
@davidbalan6571 Жыл бұрын
But, while the GTX Limited stand with its luxury features and accessories , the RXT - X is designed for performance .
@robertgerrard6609 Жыл бұрын
what's your opinion Ernesto? Bolts that come in carrillo rods or install arp bolts in the rods
@calasworld Жыл бұрын
The Carrillo rods bolts of really good I will not change them
@abhvgas Жыл бұрын
hello i have a 2002 gtx 4tec limited ran great. then one day i put the key to the post and i got one long beep. checked the fuse box and found 5amp fuse bad. replaced it but as soon as i put the key to the post it pops and i get one long beep. any info you have about this problem would be great. thanks
@calasworld Жыл бұрын
Go on GreenHaulk website www.greenhulk.net/ and I’m sure they have an answer for you in the forums
@EdRaket13 Жыл бұрын
nice video! do i need new springs and retainers for the cam?
@DessiLu14 Жыл бұрын
Oh YES. DEFINITELY
@calasworld Жыл бұрын
For calascam yes I highly recommend it
@SeaDooEric Жыл бұрын
It looks almost identical to building a SeaDoo 1503 engine
@jeysonortega6439 Жыл бұрын
Niceeeeee!!!
@devinp62082 ай бұрын
Do the wisco pistions effect the the balance
@costabravaamine7262 Жыл бұрын
Vous pouvez mettre les sous titres en français s'il vous plaît ? Merci
@ThomasShue Жыл бұрын
Also do you have a website where we can contact you for work?
@DessiLu14 Жыл бұрын
Links are in the description.
@calasworld Жыл бұрын
Contact me at Calasperformance@gmail.com Also links are in the description.
@superk4562 Жыл бұрын
The camshaft does have bearings; they are called plain bearings.
@Lucasthebuilder22 ай бұрын
Do you know what is factory torque on head bolts using oem bolts?
@felix23traxtech3 ай бұрын
Did you check piston ring gap? You didn't touch on it at all. If the pistons are new those rings need to be gapped for turbo, non turbo etc...
@costabravaamine7262 Жыл бұрын
Avez vous un mail ? Je voudrait vous contacté. Merci
@ferdinanddiran85356 ай бұрын
Any spare engines Ernesto?
@calasworld6 ай бұрын
Never there’s always a new project that is an engine🤦♂️🤣😂
@ferdinanddiran85356 ай бұрын
@@calasworld hahah Yeaa I bet. I enjoy every single project you be putting out there. 🫶🏻
@climaeletricclimatizacao2952Ай бұрын
How can I contact you for a quote
@jasonmekush5280 Жыл бұрын
Valve cover bolts = 140 ft pounds lol not this guy