The BOSCH Router Table (RA1181) is the Best Selling Router Table In The World but is it any good?

The best selling router tables in the world are the Bosch RA1181 and the Bosch RA1171, but are these Bosch Router Tables Really That Good?
In Todays video, we will go over everything the Bosch RA1181 has to offer, and why this Bosch Router Table could be the perfect purchase for you and your woodshop
Buy Here
International Tool
Router Table
RA1181 www.tkqlhce.co...
Ra1171 www.jdoqocy.co...
Bosch Router www.jdoqocy.co...
Wood Routers that will work on the Bosch RA1171 Router Table
Bosch 1613 series
Bosch 1617 series base models only)
Bosch 1619EVS
Craftsman Most Craftsman
DeWalt DW616, DW618 (fixed base only)
Hitachi M12VC
Makita RF1100, RF1101
Milwaukee 5615, 5616
Porter Cable 690 series,
7529 plunge router,
and 892-895 series (fixed base only)
Ryobi R161, R162
Tool Review Zone Merch Store
Become a Toole Review Zone Channel Member for exclusive perks here / @toolreviewzone
Bosch RA1181 Benchtop Router Table
The Bosch RA1181 benchtop router table provides a large work surface for precision and versatility. The large aluminum top makes the table both durable and portable. Designed to fit a variety of routers, this router table is a versatile piece of equipment that will serve as an indispensable part of any woodworking shop. Its rigid aluminum router mounting plate is pre-drilled for compatibility with a variety of routers and for above table height adjustment with many common routers. Its 2-1/2 In. dust-collection port offers better dust collection for a cleaner work environment. This benchtop router table includes mounting hardware, features a tall aluminum fence with adjustable MDF faceplates, two outfeed shims, and an aluminum router mounting plate. The starter pin and guard for routing curved workpieces is also included, in addition to the built-in cord wrap for convenient storage and portability.

[@Aepek]

4:52 Ok, THIS had me rolling…so much so, watched it 5x in a row, having to rewind to that mark🤣🤣. Clint, you have that personality and ability to “connect” to audience thru camera like we were in front of ya. It’s so funny, the way you do your reviews; which is why love em. (Love your vids too VCG, and all the rest out there and that everyone is different 👍🏻😃) The uniqueness, quirkiness, and fun you have with the tools, video, and us……is what makes your Channel special and imo, why we love ya. Every KZbinr has their own style etc…& yours is like a comedian but not in the cheesy way where want laughs, you’ve got style & grace to go along w/ the reviews/channel….SUBSTANCE👍🏻 The Bosch Router is a beast, and a great corded router, and pretty cool that able to do 1/2 and 1/4 it’s b/c of the 2 diff included collets. Cheers to You😊

[@ToolReviewZone]

Hahahaha, whaaaaaa????? Bro, this comment just made my day Aepek. It's getting pinned brother 👊

[@rob-toolsandtech2521]

lol. Dude, this is great. It reminds me of the scene in “The Rain Man” where they’re driving over a bridge and Ramen starts humming to match the hum of the tires on the bridge. 🤣

[@mustangeek]

Just bought this router and table used. I am impressed in the power of that router, I went from a Bauer palm Router to this beast. I love the setup.

[@themeat5053]

I wasn't worried as much about the router table holding up to the work as I was about the folding card table you have it sitting on. Again, KZbin kept this from me for a month. Glad I finally got it.

[@pmdinaz]

seems simple enough, but you're the only one who has covered the locking tab, and the option to adjust from the top side!!! great job!

[@apocsurvival916]

I was looking at buying this and accidentally came across this video. Omg - this guy freaking cracks 👏 me up!!!!

[@RedSnakeGT500]

Same here, brotha. Ive had this router table for years and used it to build the doors on my kitchen cabinets. Its a solid choice overall and especially for the price

[@AtownOriginal]

I know zero about tools but my girlfriend wants a router table for Christmas and this has made my decision super easy. Thanks bro!

[@ToolReviewZone]

She will really like this Alex

[@VCGConstruction]

I have the “Other” Bosch version of router table and it does everything I need! Solid overview, you’re a BEAST Cuz!

[@jacksmith2315]

Other than being a cabinet/having storage, whats the difference between the two? I would have thought the cabinet style would be more expensive, but the links in the descriptions show the cabinet style being cheaper.

[@george200099]

@@jacksmith2315 the cabinet style router table is MDF except for the mounting plate. I prefer the MDF top. The cabinet style also keeps down on dust a bit more

[@kenbarwell3261]

I bought the other one too. Great machine

[@ToolReviewZone]

Haha, you're ahhhhhh beast!

[@RidgidRon]

@@ToolReviewZone WWWHHHHAAAATTTT???

[@MrFz1rider]

I mounted mine to a movers Dolly and it makes it so easy to move around.

[@The_Ol_Bizzaroo]

I have owned this table for around 2 years. I have 3 big complaints: 1) there's a ton of slop in the height adjustment. Fine adjustments are next to impossible because the mechanism that holds the router in is not beefy enough. The slop isn't just vertical, it's side to side, which is really bad and potentially dangerous. When adjusting the height Comparing this mechanism to a router lift shows the huge gulf between the two. 2) the aluminum top has sharp edges that marred my workpieces. 3) dust collection is a joke. Some of the dust goes into the port in the fence, but most gets sucked under the table and then all over my shop. After much frustration, I bought an Incra router lift and built a new table with a melamine top. Much better option.

[@TheSungecko420]

I absolutely agree. I have this exact setup. My complaints are: 1. Dust collection sucks. You can see the aftermath in this video how there is dust everywhere and how it shoots out in front of the workpiece when you start. 2. Bit changing is a huge pain. I’ve gotten to the point that I just take the router out because it’s easier and safer to change a bit. 3. The micro adjust is difficult. Unlocking and locking the router to adjust takes a lot of extra time. Plus, as you stated, when you unlock and lock the router to adjust, there is slop in the vertical and horizontal. It may be small but it eliminates precision. 4. For someone that uses their router, as I do, with the plunge base outside of the table, removing and reinstalling the router back into the table is cumbersome and time consuming. I understand most people will dedicate a router to the table but I don’t need multiple routers laying around that can all do the work I need that the 1617 does. I do agree with the video assessment that the router itself is awesome. However, you’d think buying a router that mates perfectly to a table would be much more user friendly.

[@fryerre]

I agree - I have this table too and I thought I'd find out more about how to use if better. This guy seems to have nothing to add. Poor review.

[@bordenf]

I purchased the RA1181 a few days ago. Had trouble getting the plate that holds the router to level with the surface. I put a level on the table with the router plate removed. To my surprise, the table is not flat! The table is slightly bowed!!!! The level is 1/16 " off the table on the left side if you press down on the right side of the level. Unbelievable! I checked twice with a different level in a different area of the table. Same result. i returned the table and got my money back. I do not believe my experience was a fluke. I have now come across other reviews with the same complaint. I wish to cut precision parts for a billiard rack, and this table won't do! Looks like I'm going to have to build my own.

[@Methodical2]

You'll sound like you do lots of work with the router and it would make sense to buy the more profession setup. If I did as much work with this as you'll seem to do, I would not have even considered this sort of set up. I'd gone straight to the something like the Rockler setup and not wasted my time and money. This seems more for your DIYer who doesn't want to spend $5-600 on a table setup.

[@gaylehiner9511]

How do you like you router? I realy need a good one the first time, thanks for your help😊

[@ryananthony4840]

I am really happy with the CMT Orange router bits myself, and I can't believe menards carries such a high quality brand lol

[@michaelturner4290]

Good thing I saw this video. I didn't realize the table and router was not all in one. Thanks for posting. Great review! Great video.

[@HRConsultant_Jeff]

I have a Bosch cabinet version. It works great but I wish they would offer swing up extensions. The plate adjustments are easy but you have to set it up correctly in the beginning.

[@johngaskey218]

I know you’re not a Lowe’s fan but I have the Kobalt version of this table and it’s as handy as that one and it came with the router. I haven’t had anything bad to say. Just wish it was easier to pull the routers out of these things for times when you want to freestyle your router.

[@scraplifetrashtocash4551]

I've got the Kobalt one too. I actually think the Kobalt one is better. This has a lot of bad reviews on getting the insert for the router plate level. I like Kobalt is a one surface table. No leveling to do. I keep the router on that table though. Because I've got the Bosh router kit also. I bought the one with the plunge kit part of it. And I got a small router for making signs.

[@tensazero]

I went with the Skil ver1 over this. I've only used it a few times. Many of the parts are recolored clones, but this table is better. The most important thing is that a dedicated router is used for tables. Removing is a pain even if it's simple. 90% of the time a simple board with a hole is good enough... Heck I've turned the router upside down and clamped a straight edge to it instead of setting up the table.

[@hartleyshandcrafted]

this dude is basically an alternate reality dane cook that never got famous. love the channel. keep slicin and dicin.

[@bigbawls81]

I have the very same setup and am very pleased. Thanks for your review. Always entertaining.

[@dantheman9395]

I hope this tables everyone’s thoughts on this subject. It’s great the links in the description route people to the products used

[@ToolReviewZone]

Omg.... I was actually wondering how you were going to pull this one off, but you did brother 🤣👊👊👊

[@dantheman9395]

@@ToolReviewZone not gonna lie. Had to seriously think about it. 😂✌️🤜🤛

[@ToolReviewZone]

Hahahaha

[@chrisrathore5085]

Man, I love your style of reviewing things. Good laughs through out. Finally someone who focuses in on things that the average joe has on his mind. Like for example how you went back and showed how the router locks and unlocks to raise and lower it. Not everyone is a pro and people like me getting into these tools love to see these type of reviews. I especially like that you didn’t describe every piece of styrofoam, cardboard, and paperwork that comes in an unboxing video where you sit through 20 minutes of crap before the dang product is revealed. I will say it is because of this video that I am going to purchase this. It’s exactly what Ive been looking for. Thanks again for the great review. I look forward to watching other videos you’ve posted.

[@kph913]

You are amazing!!! Best review video I’ve ever watched!!!! I just bought the table and the router!!

[@roswald392]

Thanks for not going through the setup...bought this table recently and looking forward to making some molding and trim. Great video.

[@scottkaiser8031]

I bought one on special last year at your least favorite big box store ... Same setup as yours I would also recommend it.

[@ToolReviewZone]

Thanks for the feedback Scott!!!!

[@MarcusRefusius]

I bought a floor model from Lowe’s made by an Australian company called Global Machinery Company. Same animal but taller. Got it for under a hundy. Had to assemble it. No problem. t works well I still have it. I bought a bench top Drill Press about the same time. Same Mfg. still works great. A couple years later I saw Bosch selling the very same machine with their brand on it. Bob’s your Uncle…………..

[@13612]

Watched your video and just ordered it. Good sense of humor you have!

[@hagensiekerj]

Nice video. Thanks. I'm a retired dude and just took up woodworking as a hobby. I have been using a laser for some time and I was having to buy pre-made blanks at the hobby store to crank out decent finished products. I decided to make my own blanks and create a little more profit margin. While I don't doubt any of the (great) comments below about precision, I also know that all I need to do is take rectangles and do a round over or Roman Ogee edge profile. I got the RA1171 and it meets my needs perfectly. Also since I'm new to the woodworking game I don't really have a proper workspace and I was doing some things with my router that probably weren't nearly as safe as running my stock across one of these router tables. I've no doubt there are much higher quality tables out there and would I need one, I'd get one. As it stands the RA1171 suits my skill level perfectly.

[@antoniodeleon9547]

"I’m gonna bring this right here… shut up bird!" lol, good content and thanks for using the camera very well throughout all aspects of tool operation, that helped me with some basics that would normally take me a few minutes just to look up in the manual or learn through trial and error.

[@robertsnyder6982]

Excellent video. Just put that table together and you are right, the directions suck. But all that meant is that it took a little longer to put together. Also purchased the same router and it is working great so far. Looking forward to giving it a workout this coming week!

[@mondaymorningplanner]

Loved the video! Great review and you helped me make up my mind!

[@AntonioClaudioMichael]

That is so cool the vacuum and the router both turn on at the sane time with the main table switch okay I need this router table now was never sure it was worth it now I belive it is going back and forth to turn a vacuum on and off sucks nice thanks Clint for the info @ToolReviewZone

[@Nebx1989]

Putting it together isn't hard but it IS time consuming. Anywhere from an hour and a half to two and a half. You'll spend a solid 40 minutes identifying the many many types of screws and nuts packaged together in big unlabelled plastic bags, comparing the length and shape of them to what is shown on the piece list of the instruction manual.

[@ARIVEstyle]

The best thing about this model is that the base is made of aluminum and larger than the others, but what is really surprising is that it fits perfectly on cabinet saws.

[@9989Wolverine]

Watched 3 minutes of this video and you already have a new subscriber 😂. Love the content

[@moisesrobles7884]

Tool review Zone tell him the truth you're the man smashing my like button

[@ToolReviewZone]

Always SMEEESHing you like button Moises kabooooooooom!

[@ryanmacewen511]

I bought that same router. You definitely want the variable speed on a 1/2 in router. Some bits are just knarly at full boogie, and not in a good way. I ordered the bosch offset wrenches when I ordered mine. of course, you can use an external router speed control. HF Tools one is decent. I use it with a soldering iron sometimes too.

[@josemaldonado7257]

Learned a lot, but mostly, you had me cracking up 🤣🤣🤣. Awesome video.

[@kevinklepp5894]

If the Bosch name is on it ya know its going to be good and hold up to the use thank you for that great and honest review

[@ToolReviewZone]

Yeah bro, I definitely need to start looking at more Bosch for my lineup

[@jimthompson9992]

Yep! Yep! Yep! I could NOT be without my router a nd table! Love those tools! My table is a weeeeeeee bit older than that one....heck, its probably older than you are, young man, but be that as it may, this is one spiffy table! I'm not in the market for one but Bosch...you did mighty fine with this 'un! I have to say, I did giggle a bit when you said about buying a router if you didn't have one...yeah, funny, since I have 3 but I'm glad to see you're using those HEAVY DUTY bits and not those iddy bitty ones...toss those out! Freud bits are AWESOME! I do have a few Bosch bits but LOVE those Freud bits! I am curious....how can you afford so much wood??? Are you, per chance, independently wealthy??? Heir to the Amazon fortune? Cousin of Elon, maybe?? Wait....you're not Pablo Escobar's love child, are you????

[@jacksmith2315]

The end of your comment about affording the wood....lmfao! Good one

[@ToolReviewZone]

Hahaha, as always, awesome comment Jim. That said, not wealthy.... I just stole VCG's credit card info brother 👊🤣

[@cyberxray]

Great video! You are funny and the video is put together really well. I went out and bought this table.

[@cliff5240]

Bought one a couple of years ago. For the money it does a great job! I do want to to get a better table with a router lift in the future but this little table has done well for me.

[@ToolReviewZone]

Thanks for the feedback Cliff!!!

[@James1.17]

😂 Came for advice, left with advice and some laughs. Good investment of my time.

[@ToolReviewZone]

😎😎👊👊

[@davidrussell8783]

I hadn't seen your video before I pulled the trigger on a purchase. I bought the 1181 and hooked a Bosch MRF 23EVS to it. The leveling of the mounting table is a bit awkward and I would have liked stronger router mounting screws and less play in the mounting screws when tightening. Height adjustment is easier on the router itself rather than the hex key. I haven't put much stress on the tool ... yet.

[@christopherdekonstrukt444]

I have it and made my own wood base for it. I replaced the stock switch with a surge protector and Rockler switch. The router plate hole is an oddball size and not accept third party router lifts.

[@blayne2029]

Love your channel. I just got the basic Rockler router table. But this seems like it will work so much better!

[@ToolReviewZone]

Thanks Blayne!! Haven't used the rockler, but really like this one 👊

[@blayne2029]

@@ToolReviewZone I've seen a few folks online complaining that the surface isn't flat. Looks like no issues with that for though.

[@mathewurmston9734]

Could the top just be thrown in the back of the ute with out the legs? And then just set it up on my sawhorses?

[@mhdz10]

Hahaha I love the humor you put into it bro. Very nice and informative video. Thanks! 😄👍🏼

[@profcah]

I have the version that folds up. Great table with the right router.

[@broakland2]

Enjoyed your video, fun and informative. Thank you.

[@ToolReviewZone]

Thanks Andrea!!!

[@dokmanian]

your like Alexa or Facebook I was thinking about getting a router table to make it easier and BAM you put out a video thank you buddy

[@ToolReviewZone]

Hahahaha, that hilarious! 🤣👊

[@chadomweg5640]

How did you get the insert ring to sit flush? Bosch USA specifically states they have the red insert ring sit 1/16" low for "safety". I just unboxed mine and it sits low. I'm debating a return for another brand or preferably a fix. Any suggestions?

[@brianclancy6101]

I bought this 1181 router table based on this and other reviews, all glowing. And it's pretty good. UNTIL YOU NEED TO USE THE MITER SLOT to perform anything above fundamental with this table. Like a box joint. It needs a jig or a sliding fence. They all use the standard 3/4" (19mm) or t-slot track. All of them. But this router table DOES NOT HAVE A STANDARD 3/4" track or a t-track. It has a 22mm straight track, so that miter fences or Rockler Box Joint Jigs rattle around in it like dice in a cup. Then you start to add masking tape, wooden blocks, crank down some big clamps or do whatever pain-in-the-a** thing you can come up with to make it work like, you know, a real router table. I saved money with this, if you don't count the new router table I'm going to have to buy.

[@jetme8815]

Great Vid Brother! Going for it. Thanks for the entertaining style too. Rock On!

[@ToolReviewZone]

👊👊👊👊👊

[@visanic]

Great review! Funny and informative.

[@rawhidehat]

I'd like to have seen the cutter change. That looked like a disadvantage. Thanks for the video.

[@Zavrl_Lavigne]

Don't forget there's out feed shims that come with it to edge joint boards as well!

[@MPjdog]

You helped me make a decision! Its purchased!

[@ephraim.1964]

Excellent review!! Bruh you are HILARIOUS!!! I laughed so much watching this omg!! 😂🤣😂🤣😂 Don’t stop being Yourself. 👏👏👏🙌🙌

[@ToolReviewZone]

Hahaha, thanks so much brother 🙏

[@scottdezieck7056]

Another great video. I have the other version and had it for years. Great table. You're great at what you do ... definitely keep us all entertained through the video !! Lol

[@justinkayce9811]

I used my buddies BOSCH 1617 on a custom table with woodpecker accessories and was like fk a table saw. So I pulled the trigger on the BOSCH 1617EVSPK that’s been sitting in my cart for the last 6 mo. Now I’m researching table options. I’ve had my eye on this and the cabinet version for as long as the router itself. One question I’m scratching my head over is the capability to install a lift down the road. How easy is it to do with this table? Could I pop in a Jessem with ease?

[@justwondering8409]

Check the measurements of the lifts' plate. I haven't found one that fits.

[@BPNevada]

100% grade A great video Clint!! 👍💯

[@ToolReviewZone]

Hahaha, thanks KG👊👊👊👊

[@frankvigil3333]

Hello, I really enjoyed your video. I have a Makita RT0701C corded router and was wondering if this table is compatible to mount that tool. Thanks again.

[@jamallaidley4718]

I've seen it and taught about getting one too Clint.

[@ToolReviewZone]

Yes to both questions Jamal! 🤣👊

[@Vikm555]

Beautiful explanation.

[@bluemantom77]

If i had the room clint i would most definitely buy this same routing table and router

[@ToolReviewZone]

Yeah bro, I had to clear a space forbit.... but we'll worth it 👊

[@1997LT1Camaro]

I almost bought this table until I read all of the negative reviews about it not being flat by numerous people.

[@buzzpatch2294]

have been looking i will buy this

[@PendeltonWhiskey]

Bosch sells a pair of collet wrenches for that table which would help to avoid ruining your bits when changing them out. Also, I've seen what a router can do to a human hand at the scene of the accident up close and personal and because of that I'd never use a router unless it's in a table and that table has a fence installed. It went through his fingers like they were butter, a truly horrific accident. I respect and fear a router more than any other tool

[@marcellemay7721]

Absolutely. I almost lost a finger. It turned my middle finger tip into ground meat. I still have the finger, it healed up well, but I lost a lot of feeling in it. I did a stupid thing in a hurry. Never do things in a hurry. I've been a carpenter for 40 yrs and the only times I ever got hurt was when I was in a hurry. I don't get in a hurry... ever , anymore.

[@PendeltonWhiskey]

@@marcellemay7721 I'm glad you didn't lose your finger. You're absolutely right, haste can cost digits. I've been lucky with my fingers but I've paid the price with broken bones more time than I care to admit

[@marcellemay7721]

@@PendeltonWhiskey Oh yeah, I got a few of those too. Every time it's about to rain I get reminded. Most of the time, I love what I do. But, as I get older, my body doesn't love it so much. It's a physical job, and I mostly just do interior finish work now. My body can't take framing houses day in and day out anymore.

[@deezle1460]

A router in a table can be just as dangerous as a free hand router. I had a co worker who stuck his hand in the path of a milwaukee 3.5 hp router which was attached to a huge router table & controlled by a computer... he thought he could adjust the cut piece as the router was cutting... needless to say he was NOT fast enough to adjust the cut piece before the computer adjusted the path of the router... router room looked like something out of a horror movie, slung blood/flesh everywhere ...almost 2 years later and he is still undergoing surgeries... he will NEVER use that hand the same, router bit grabbed and cut the muscles/tendons in his hand... I have this router and table, I treat it like a loaded weapon; my set up came with both wrenches to change the bit

[@PendeltonWhiskey]

​ When I made my comment above, of course I wasn't thinking about a robotic table router. I've never even been near one and don't want to be. A robotic router table is a different animal altogether. I hope your co-worker is going to be able to use his hand again.

[@bmaziarz]

Just subbed. I’ll rolling right now 🤣. And a great review!

[@lexuannhi]

1/ I have considered for months before buying a table top router. I have looked, compared this Bosch and finally went with a Skil RT1323-01 router for 2 reasons. First, Skil is American made while BOSCH is German made. Second, it's about 50 bucks cheaper while it has everything the Bosch has. So far, I'm very happy with it. 2/ Another thing, I don't think your vacuum worked well because I can see dirts all over your router. Thanks for the clip.

[@khiem1939]

In reality Skil is NOT American made and Bosch is NOT German made, guarantee both are NOT made in either the USA or Germany but in our 51st state, Communist China! Bosch battery powered tools are NOT made in Communist China like most other brands, but are made Worldwide, I have some made in Taiwan, South Korea, Singapore, Germany, Austria, Switzerland, Croatia, Poland and many other countries, NONE in Communist China!

[@AntonioClaudioMichael]

I have defenitly see this router table and also wanted to purchase one but never have nice video Clint @ToolReviewZone

[@Blah-blah-sure]

I don’t understand, you have the vacuum running & connected. But you still have dust underneath the table?

[@ToolReviewZone]

It's like a table or miter saw. Near impossible to catch everything

[@Blah-blah-sure]

@@ToolReviewZone oh. And I was looking into getting a shop vac but the hose diameter is 1-7/8 whereas the connection for these tables are bigger in diameter what gives? Is there a reduction somewhere.

[@thessentialnetwork]

Dude, you’re very funny! You got me convinced. I’m gonna buy one now.

[@ToolReviewZone]

Hahaha, thanks brother. You'll really like it

[@AntonioClaudioMichael]

I will defenitly be grabbing one because of the Real Nassss Like Video Ya Did Clint @ToolReviewZone

[@tracker335]

Funny, entertaining and knowledgeable !

[@itsmyguitar]

Nice demo.

[@stevenferro]

im on my way to the store - thanks

[@sergiogonzalez-qz4id]

Im definitely getting it now.

[@franke460]

I’ve had one for years. Used 1/4 inch ply and made walls added some foam insulate took down the noise a bit. Good by

[@ToolReviewZone]

Awesome tip Franke!!!!!

[@briha3142]

Isn’t the Kobalt Router Table WITH Router, now on sale for $129 at Lowe’s, a much better deal than the almost $400 for this setup?!? (Me thinks so!)

[@davidndahura7437]

Good but can I produce a door with it , including making door panels?

[@kbbb4227]

Thank You.

[@MDD1966]

Can you just put the top on a larger table, no legs! Looking at adding to a current longer table

[@Strictly4Defense]

That guitar imatation was straight up funny

[@ToolReviewZone]

Thanks Lavar

[@cerberus2881]

I have an old Craftsman benchtop router from the early 80's, cast aluminum top, Teeny Tiny and not Real Flat like. And I got a new MRP23EVS from Bosch so I might need that nice upgrade. 🤣

[@zozoart]

I found that the red guard does not sit flush, which is a problem for smaller pieces. It sits below. I can fix it but I prefer buying things that I don't have to fix.

[@ocotillodavid2296]

Are extensions available to make the table longer?

[@garvielloken3929]

4:52 I lost it!!!!!!!! 🤣🤣🤣🤣🤣

[@ToolReviewZone]

🤣🤣👊

[@sergiogonzalez-qz4id]

The voice acting made me subscribe. Very informative but not boring. Loook at iiit!

[@ToolReviewZone]

Haha, thanks for the comment and welcome to the channel Sergio!

[@snoww2009]

At 8:26, the groove is near the edge of the board. Is the router table effective in making groove across the width (not the length) of the board? Or a handheld plunge router works better?

[@EivinSukoi]

I usually hate , really hate people making videos and wasting my time petting dogs , cats or simple getting distracted talking shit , but man you are so funny , I am here to watch your comedy really 😬

[@kurtwm2010]

5:19 you are lucky, the last time I bought an identical piece of oak I paid $19,000

[@snarfdog8007]

I love this table, but I just bought the Dewalt DCW600B. I haven't opened it yet. Do you think I should buy the Bosch router? Kind of in a pickle here.

[@ToolReviewZone]

The dewalt is a good router. Thay said, I think this Bosch is a great tool and had my eye on it for a while. I guess it depends on if it would fit your specific needs, but the Bosch is a beast

[@billsedutto8824]

I currently don’t own a router but have been doing research. The DCW600B is a great cordless trim router. I saw a review by a woodworker that rated it the best cordless trim router available and it’s on my list of woodworking tools to buy. I’m considering that one or the Milwaukee version. That being said that’s a small router both in power and also it only takes 1/4 bits. For a table you want a 2.25 HP router for 1/4 in and 1/2 in bits and the Bosch Clint reviewed is one of the best in that category and what you want for a table router. Both the Bosch router and this table have been on my list as well. Both are solid. Bottom line if you’re doing enough work you’ll want both of them. Based on what Clint said about never taking the router off the table I might get a second corded router if I find myself using it enough and probably go with the Dewalt corded with plunge base instead of having 2 of the same Bosch routers. Hope that wasn’t too long winded.

[@snarfdog8007]

@@billsedutto8824 Thanks Bill. Based on the reviews the Dewalt seems like a great router and I like the versatility of a cordless. I think I will get the Bosch as well and have two routers in my arsenal!

[@Methodical2]

Nice review. Thanks

[@kellanaldous7092]

My router table is a piece of melamine with my thrift store router bolted under it xD

[@Aepek]

If it works, and able to get the work done ya need….NOTHING wrong w/ that setup, imo. Cheers✌🏻

[@Aepek]

I used an old wood table, cut a square out to drop in the router table insert (from rockler) and mounted my router to it and made my own router table. Works, was what able to afford back then, and got the job done to make money 👍🏻 ✌🏻

[@kellanaldous7092]

@@Aepek amen, brother!

[@ToolReviewZone]

Hahaha🤣👊

[@josephromero1596]

I have Dewalt DWP611 will it fit?

[@305liveandlearn]

I'm confused, you didn't show us how to connect the router cable to the modem 😎🍻

[@ToolReviewZone]

Haha, nice 🤣👊

[@nickfish3545]

I use a jet at work I’m looking for one for my home shop

[@goforthbmerry]

no comment - just keeping the youtube gremlins happy for you

[@ToolReviewZone]

Hahaha, thanks Edward 🤣👊

[@waynesanford6408]

I have this exact router table and exact router (except I have the plunge base, too). I like them both but I HAVE PROBLEMS! I put the table together, no problem. I mounted the fixed base to it, no problem. But from the very beginning I've struggled with getting the router into the base. I believe I have it under control now -- I can adjust the router to any of the three preset heights (though it's a struggle and not smooth at all -- maybe I have sawdust in there somewhere?). I can adjust the height of the router by using that special tool from the top. Again, not smooth, but it works. That;s where my problems start. I can't get the micro adjustment to do a damn thing. I unlock the base and turn the dial and from underneath the indicator moves up and down, but the bit doesn't move at all. Is it really that important to have such fine adjustments? Can't I just eyeball it? Also -- and related -- how do I know just how high to adjust the bit, say a roundover bit when I'm making drawer fronts? I built my own vanity and another cabinet and for that I took the router out of the table and it worked fine. So here I am venting about how to and why make the ultra fine adjustments. Help !!!

[@Methodical2]

What adapter are you using to connect the shop vac?

[@BobbyKinstle]

Can you use a flat bar to measure how flat the top surface is?