"ECO" Resin casting powder - Magic pour

toonpish.com/
Hi I'm Wendy a resin artist and crafter.
In this video I am trying out ‪@LETSRESIN‬ Magic pour ECO resin casting powder.
If you have any comments or just want to ask questions please use the comment section below and I will get back to you.
I hope you enjoy the video.
Thanks for watching
Wendy
Discount code for you WENDYS10 UK ONLY
at the checkout of Let's resin
UK Affiliate link for Let'sResin
letsresin.co.u...
Amazon affiliate link for Let'sResin store UK
Discount code 10WENDYS
amzn.to/49wOGTv
Discount code for CA use Wendy
Affiliate Link CA Store
letsresin.ca/?...
Discount code for USA for Let'sResin
For US Store:
WENDYS24 for molds & tools
WENDYS2024 for everything else
USA Affiliate link for Let'sResin
www.amazon.com...
UV resin Starter kit www.amazon.com...
UV resin www.amazon.com...
US Store Let'sResin Epoxy Resin : amzn.to/3URC7tX
UK Store LetsResin Epoxy Resin. : amzn.to/3BtGnci
High quality graphics from elements.envat...
Music from Epidemic sounds www.epidemicso....
New Mask www.mysafetyge...
Graphics pixabay.com/
Thumbnail www.canva.com/
AFFILIATE SHOP LINK BELOW
As an Amazon Associate I earn from qualifying purchases
These link below will not cost you any more than the store price but I will receive a little help for my channel. Thank you
www.amazon.co....

[@WendigovanStudio]

These came out great Wendy. You did a great job. The reason the rose gold colour pour cured so quickly is due the the try being very porous and the water got sucked into the tray, making the new pour dry up quicker. You could add a little extra water to try to get it to flow a bit better. Another thing that I noticed it Lets Resin have made a mistake on the ratio that they have put on the packaging. If it is 100 powder to 30 water then this is a 10 - 3 ratio. Might be worth mentioning this to them so not to confuse new user's who try it out. Any sorry for long comment. I enjoy watching you video's and love the outcome every time xx

[@Toonpish]

Thank you so much 😀😀💜 the water ratio is definitely worth knowing 😀😀💜 I really appreciate this 😀💜

[@tatortot6776]

Great video Wendy! I love this stuff, as well as Resincrete. I found that most (if not all) of these "crete" compounds have a similar ratio of 10:3, or close to that. I've used Aquacast too, and on the Aquacast website, there is a calculator where you can put in the exact volume of your mold and the calculator will instantly tell you how much powder and water to use. I add a few mls to the volume to account for anything I can't scrape out of my container. At least this way we always know how much to mix and don't have extra to figure out what to do with fast! The Aquacast calculator works for all or most of these compounds. I can't include the link because youtube won't print links-- but it's easy to find!

[@Toonpish]

Thank you I will have a look for it 😀😀💜

[@LETSRESIN]

Woah😍🤩so lovely!❤

[@Toonpish]

Thank you so much 😀💜

[@rebeccamoerno8356]

What a beautiful tealight holder.

[@Toonpish]

Thank you 😀😀

[@kdscraftcorner]

A little advice. 1st, you can add more water. It doesn't have to be so accurate. To get my measurements without getting annoyed with the math (I was an accountant for over 20 years, I hate math now😂) I use the calculator on the elichem eco pour page. It calculates 35g water to 100g powder, I believe, and I have never had any issues with curing. It's so much easier to use than you think and so much more forgiving than you expect. ❤

[@Toonpish]

Thank you so much 😀😀💜 I will try and remember that 😀😀💜

[@margaretjohnson1283]

I love this , they look so smooth! Thank you for sharing, I love your work.😊

[@Toonpish]

Thank you! 😊😀😀💜

[@jpwoodwork]

Very cool Wendy

[@Toonpish]

Thank you Jp 😀💜

[@amandagebel2528]

Wow that stuff looks pretty cool I would do some gargoyles or dragons for a dollhouse. I like that speckle effect for the gargoyle or dragon body. Nice job❤️🧡💛💚💙💜

[@Toonpish]

Thank you 😀😀 they would look fantastic 😀😀💜👍

[@amandagebel2528]

You are welcome ❤️🧡💛💚💙💜

[@angelfromhellshawna]

Wendy, you can put the paint into the powder and water mixture after it's mixed. That's how I've seen it done anyway. 😊. You get really bold colors that way.

[@Toonpish]

As you don’t have much time, I would panic if I was putting colour in after mixing 😳😂😂😀💜

[@rosemariediamond5948]

Great experiments. Those tea lights are everything!

[@Toonpish]

I totally agree 😀😀😀 very nice mould 😀😀💜

[@Kathy-Carr]

I’ll have to get some of this brand. I have a package of some brand that is beige, not very pretty. What a great idea to add the tea light molds to the tray! Which is why you have a KZbin channel and I don’t…😅. Great tutorial. Thank you! 💜💜💜

[@Toonpish]

Thank you Kathy 😀😀😀 it was a fun project and I do love it 😀💜

[@melissaphillis7247]

❤ 🎉 well done Wendy 🎉 ❤

[@Toonpish]

Thank you 😀💜

[@rechellethackray]

Wendy WOW!!! May I just congratulate you on your film-making skills yet again ❤ You are absolutely 💯 nailing it sweetheart. It is such a pleasure to watch your tutorials. Always very informative, a few giggles but always a lesson, your positive attitude and those editing skills are seriously blowing socks off. Thank you for all the effort you put in for your viewers. Much love your Aussie fan ❤😊

[@Toonpish]

Rechelle thank you so much 😀😀🥰🥰 it’s great to hear that my efforts are not going unnoticed 😀😀😀 I can’t thank you enough 💜💜💜

[@patriciaharkin1571]

Sorry, had a visitor in the middle of the premier! Love the results Wendy.

[@Toonpish]

Don’t apologise honey 😀😀 it was nice you chatted 😀😀💜

[@georgiastewart4479]

Shared. Wow, this stuff is cool! It kind of looks ceramic. Thanks for showing us 💜💙🤍

[@Toonpish]

Thanks for sharing!! 😀😀💜

[@sugargmum4517]

Well done for becoming an ambassador Wendy 👍 Love how these have turned out and the colours 🤩😍

[@Toonpish]

Thank you Lisa 😀😀💜 really appreciate that 😀💜👍

[@katrinthorsdottir7514]

I love how all of those came out! So beautiful! ❤❤❤😊

[@Toonpish]

Thank you! 😊

[@amandagebel2528]

Congratulations that's amazing❤️🧡💛💚💙💜

[@Toonpish]

Thank you so much 😀💜

[@amandagebel2528]

You are so welcome that is amazing let's resin yay❤️🧡🧡💚💙💜

[@_Daegon616]

This stuff look great, thank you for an awesome video Wendy 😊

[@Toonpish]

You are so welcome! 😀 glad you enjoyed it 😀💜

[@tammytoth5874]

Wow 😮😮😮😮 so cool!! I think it looks better and easier than the other Echo pours

[@Toonpish]

Well I can’t say that because I have no experience 😀😀 but for a novice like me, I found it easy 😀💜👍

[@nicholas87541]

Interesting how the pour reacts to being poured onto itself. I was thinking of how the eco pour needs a seal and wondered if the porous nature of the hardened trinket tray meant that bubbles came up from it as the eco pour set quickly? I had never seen any eco pour put on itself before this video. Really neat idea to try!

[@Toonpish]

Just a spare of the moment thing really 😂😂 but really liked how it finished up 😀💜 it possible about the bubbles, but I think it was too much mica in the last bit 🤷‍♀️😳😀

[@beverlytinsley-minniefield2434]

So Magic Pour seems to be pretty cool. I have to give it a try someday. Great experiments!!

[@Toonpish]

Thank you 😀😀 I really enjoyed it 😀💜👍

[@lizblameuser7552]

I love this video! I’ve been wanting to try this stuff so thank you so very much for this tutorial..👍😁❤️

[@Toonpish]

You are so welcome! 😀😀 glad you enjoyed it 👍💜

[@rosemarywilliams5136]

Wonderful job Wendy ❤

[@Toonpish]

Thank you Rosemary 😀😀💜🥰

[@kathrynseaman6482]

very nice love the light purple

[@Toonpish]

Thank you Kathy 😀💜

[@eckyfumparkid3096]

Absolutely loving these! Lilac is so pretty & so is powder blue 😊 I don't do eco pours very often, as its all abit quick for me but might give it another whirl after seeing your lovely creations 💜 xx

[@Toonpish]

Thank you so much 😀😀 and yes it’s definitely quite quick 😂😂

[@krystalkeyes4835]

Very cool and cute 🥰

[@Toonpish]

Thank you so much 😀💜👍

[@LostSiren13]

Very cool tutorial. Actually just ordered this set yesterday. I’ve been sick as a puppy the past several weeks. Now playing catch up which is going to take a decade to catch up. Missed ya! 🥰😍Actually want to pour candles in molds made with the ECO. That’s the plan.

[@Toonpish]

Oh that does sound like great fun 😀😀💜👍

[@JuliasCraftyChaos]

I didnsome experiments my self Wendy!! You can add the liquid color (paints, dye, etc) and mica to the powder and the color will come out darker. But I did find that if you just want to use mica, you need a crap ton!!!

[@Toonpish]

Fair enough 😀😀 so the powder was like glue consistency before the water added? Emmm interesting 😀😀💜

[@JuliasCraftyChaos]

@@Toonpish I added the liquid to the water and the mica to the powder. Then added water to powder. Which made the color of finished product darker.. but it took so much mica and paint/dye to get thwm darker than baby pastel

[@Toonpish]

@@JuliasCraftyChaos right I’m with you 😀😀💜

[@angelclstudioartgallery591]

I would definitely love to try it. I make beautiful crafts well done, and you did a good job

[@Toonpish]

Thank you so much 😀💜👍

[@neighmaway]

I love this product. I got the big bucket 😂. For coloring you should try Colourarte purley pigments. Very very pigmented pure color. I used 2 drops each in my magic resin pours. The color was still light but I only put 2 drops. Love this idea too.

[@Toonpish]

Oo thank you 😀😀💜 I will check them out 😀😀💜

[@bluecurlygirl]

Love how they all turned out. Very interesting product. We're using aquacast at the minute after first buying a resincrete kit and a kilo bag of the stuff too. Aquacast is a different beast altogether with not much work time from what I've seen. Might just have to get my hands on some of this and see what it's like. Love how you moulded the tea light holders into the trinket tray. Thanks for sharing.

[@Toonpish]

Sounds like you have a lot more experience than I 😀😀 thank you for your insight 😀💜👍

[@sallymccornack122]

Congratulations on being an ambassador that’s really great and I look forward to seeing you do loads more. Do you know when it will be on general sale for us because it’s not on let’s resin or Amazon at the moment?

[@Toonpish]

It’s always released in the US first then gradually moved to other countries. We always lag behind don’t we But hopefully it won’t be too long. I will ask for you 😀💜

[@debramaryan4305]

Have tried most of the eco pours , seems closest to aquacast with the brilliant white, finish, however is a lot more expensive. It does cure faster like resincrete. Your video as usual is brilliant. ❤❤

[@Toonpish]

Thank you for that insight 😀😀💜 you made me smile 😀😀💜👍

[@diannesart]

You always manage to save your pieces. The tea lights are lovely.

[@Toonpish]

I do try 😂😂😂 if only I didn’t have to 😂😂😂💜👍

[@DianasYTChannel]

The candle holder came so pretty. I have the Let’s Resin casting powder, but I prefer the JDiction ResinCrete. I find it mixes better.

[@Toonpish]

Now that’s interesting 🤔🤔 I couldn’t see any difference myself 😳😀 but I haven’t done that much either 😂😂💜

[@DianasYTChannel]

@@Toonpish Could be just me. LOL

[@rendaowe]

I loved this!

[@Toonpish]

Thank you 😀😀💜

[@fairyspunfibers9098]

WOW, that is really WHITE! Kudos to Let's Resin! That's exciting they have their own eco pour now. It looks sooo smooth and perfect; I bet it feels like bisque porcelain! You did a great job on everything, Wendy! Great tutorial, and thank you! 😊💕👍

[@Toonpish]

Glad you enjoyed it 😀😀💜👍

[@melaber77]

I’ve been hesitant to try any of these eco pour products, but I might be brave enough to try now

[@Toonpish]

I know how you feel and I think now I am just as hooked as epoxy resin 😂😂 but I do get it 😀💜

[@johnibrazzell764]

🎉🎉🎉🎉🎉

[@Toonpish]

😀😀💜

[@Gulma68]

Wendy, your videos are always beautiful, thank you. ☺️😘💜

[@Toonpish]

Thank you so much Gulma 😀😀💜

[@miniscenesgb]

Congrats on being an ambassador. interesting to see their eco casting powder. Well done you novice lol. Lovely work as always

[@Toonpish]

Thank you very much! 😂😂 I am a newbie with eco pours for sure 😀😀💜👍

[@deborahevors4850]

I’m about to order me some!!

[@Toonpish]

Have fun 😀😀🥰

[@Mamas-Madhouse-Creations]

I love how you show us the good and bad. These are lovely 😍

[@Toonpish]

Thank you 😀💜🥰

[@Coyo-Tea]

May have to give that a go it looks fab Wendy 👍🏻👍🏻

[@Toonpish]

It’s fun and quick 😀😀💜 I really want to do more 😀💜

[@sharonkayboone7043]

❤❤❤❤❤

[@Toonpish]

😀😀💜

[@jackiepena1541]

Beautiful trays & tealights !!!! The colors came out lovely & the grainy purply (bubble) effect on the last tray gave it a beautiful texture despite the fast cure at the beginning of the pour.

[@Toonpish]

Thank you Jackie 😀😀💜 it was a panic moment 😂😂😂💜

[@OG_Beckie_Leigh]

Beautiful, Wendy! I love the almost instant gratification that comes with using the different eco resins. I learned a formula for calculating how much powder and water to mix up for any mold. This is what I use for Resincrete, and it will probably work well for Magic Pour: Put the mold on your scale and zero it out. Then fill the mold to the top with water and make a note of how many grams it weighs. That’s your water fill (WF). Here goes the math! 😂 (WF * 2) * 86%= grams of powder needed; grams of powder from previous equation * 33.3% = grams of water needed. This should give you enough of the total mixture to fill the mold without having a lot left over. In order to keep from needing to do the math each time I use that mold, I write the WF, grams of powder, and grams of water on the outside of the resealable bag that I store the mold in using a Sharpie marker. I like to keep up with the water fill number in case I use a powder that has a different weight and/or mixing ratio. You may need to play with the percentage in the first equation if you’re using a heavier powder. The percentage in the 2nd equation will always be whatever the mix ratio is for the powder you’re using. Jai Catalano with UP Vibe Candles does a great job of explaining this formula on his KZbin channel. I hope that helps and wasn’t too confusing.

[@Toonpish]

ok ive read that a few times lol If i understand correctly lets say the wf (waterfill weight) is 100grams that would mean that it would be 86grams of powder and then 28 grams ish of water Would that be correct? I think I understand and writing it on the baggie is a great idea. Thank you so much 😁😁

[@OG_Beckie_Leigh]

@@Toonpish You’re welcome. It was confusing for me to write that out, so it had to be confusing to read! LOL. This is how the math will look with a water fill weight of 100 grams: (100 * 2) * 86% = 172 grams of powder. Then multiply 172 grams by 33.3%, and that will give you approximately 57 grams. That’s how much water you will need. If I end up with a decimal in any of my numbers, I just round up or down to the nearest whole number. I am not trying to play around with fractions of a gram. Close is good enough for me. And, no, I can’t just do that math in my head. I need a calculator to do even the simplest math problems. 😂 I really can’t stand bringing my phone or iPad into the studio with me when I’m trying to work, but on those days I have to. Otherwise, I would be there all day trying to figure how to solve equations with a pen and paper. My brain is too full of old song lyrics to be fussing around with math. 😂😂😂😂

[@Toonpish]

@@OG_Beckie_Leigh 😂😂😂 sometimes I don’t think I have anything in my brain 😂😂 Thank you again 🥰

[@sudhagupta4458]

Amazing resin casting powder 😍💜,Ms Wendy.Love both the creations that you made,the T-light holders look so beautiful with those pretty colors and the coaster also looks 😍 gorgeous 🤩. Thank you so much for lovely video as always 💕

[@Toonpish]

Thank you Sudha ... really appreciate that 💕

[@carolthorburn2979]

I really like the results. I'm not a pastel enthusiast, but it worked really nicely. Love the 2 colors together. You could do so many designs with broken pieces. Hey, congrats, Ambassador. Thanks for sharing another great video, Wendy. Hugs from Québec Canada 😊🫂

[@Toonpish]

Thank you so much Carol 😀😀💜 I must admit the colours did complement each other 😀😀💜

[@Jellybean_Craftz]

It turned out puuuurfectly; purple always does 😉💕💕💕

[@Toonpish]

Mary you are not wrong 😀😀💜

[@AndreamTipping]

That so gorgeous with u hun. U done amazing job on that love the tealight holders and that Rose colour pink beautiful ❤xx

[@Toonpish]

Thanks so much 😊😀😀💜👍

[@kehotto1]

Hi Wendy,I haven't used magic pour but I have used JDiction s resin Crete and after watching you video they are about the same! I cast a coaster in resin crete and while it setting I dropped resin dye into it a swirled it around, the color was way darker and it didn't affect the product at all, try and see!

[@Toonpish]

Ooo that sounds interesting indeed 😀😀 I might have to 😀💜👍

[@TheRavenBlack1-cw1sr]

❤

[@Toonpish]

😀💜

[@dalemaclaren7576]

Absolutely gorgeous Wendy 😍 Thank you so kindly for the wonderful review. Take great care and keep creating and smiling xoxo ❤❤❤

[@Toonpish]

Thank you so much Dale .. I feel like i am loosing a creative friend ... but I do wish you all the best and your fathers health be great 😘

[@lesleyhenshaw2878]

I really love how they came out, thank you Wendy. X❤

[@Toonpish]

Thank you so much 😀💜

[@MisterWhatWhat]

This stuff was delivered to my house today. I believe you are the only person who's done a review on this stuff so thank you for this! Could you use this to make a candle vessel out of it? Does it take heat well?

[@Toonpish]

I haven’t tested that yet sadly 😳 so I can’t answer. Sorry I can’t help. I’m waiting for more to do more tests 😀💜

[@Uniqenotperfect]

Love your videos! I have just started to use Eco pour and would love to see what you can use to decorate it with.

[@Toonpish]

Me too 😀😀 I’m excited to find out too 😀💜

[@lorrainecarlson123]

So glad you did this video, I've learned alot.

[@Toonpish]

Fantastic 😀😀💜 thank you 🥰

[@bethyholapussycat1618]

I've also been having fun with eco resins whilst the weather is cold. My crafting space is in a garage, so it has been too cold for resin to cure without blooming. Fabulous stuff to keep us crafters busy

[@Toonpish]

Absolutely Bethy 😀😀💜 we can’t keep still 😂😂

[@AwesomeIncidentals143]

interesting....i might have to break down and try this stuff at some point....hahahaha

[@Toonpish]

Well I resisted for a long time 😂😂 but I definitely enjoyed it 😀💜

[@resinartists]

Wonderful review video, Ms Wendy 😍 This kit is amazing and it's smooth bubbleless finished Products are amazing 😍💜.Love the colors too that you made,they will actually be a very beautiful decor items which anyone would be happy yo have 😍😍😍💜💜

[@Toonpish]

Thank you! 🤗 😀😀💜 I really need to make more 😂😂

[@resinartists]

@@Toonpish will be happy watch more creations coming from you,Ms Wendy 💖

[@CraftingGT1971]

Oh wow that product looks amazing! 😮❤

[@Toonpish]

It’s a lot of fun 😀💜

[@mizzuzie3338]

The finished product looks very planned and carefully crafted, let's leave the process as a secret! 💜

[@Toonpish]

😂😂😂😂 with you on that one 😀💜

[@carolynfrancis-mclucas6185]

The tea lights are really nice.❤ Would you use flameless tea lights in them?

[@Toonpish]

Not in this no 😀😀 but I would in resin 👍🥰

[@LauraCastro-df1cn]

❤❤👍🏻

[@Toonpish]

😀😀💜

[@mayhelencraft1787]

I loved that. I haven't heard of magic pour until today. I like watching your videos. It gives me inspiration and insight to whether I want to try something. Have you tried it with regular resin?

[@Toonpish]

Not yet 😀😀 but I’m not keen on candles being used with resin. I would have to suggest an electric tea light. 😳😀💜

[@mayhelencraft1787]

@Toonpish oh no lol I was asking a general question 😅 of the magic pour with resin. Like, can it adhere to resin in a sense. I'm sorry if you got confused by my previous question. But yes, most definitely, an electric candle with plain resin 🙂

[@Toonpish]

@@mayhelencraft1787 oh right 😀😀 sorry for the confusion 😂😂 I will have to try that out 😀 I can’t answer that yet 🤷‍♀️😀💜

[@user-hz6ox1ik2q]

Can’t find this on Amazon or the Let’s Resin Wendy. Is it available yet?

[@Toonpish]

Yes it is in the US Try the.com address 😀💜👍

[@kazbeazley80m95]

Hi how do we order the eco pour as its not on there uk site or amazon. I so want to try it as I love what you have done with it in this video ❤

[@Toonpish]

You may have to go to Let’sResin.com It will come here hopefully soon, but as always not yet 😀💜

[@TheRenfro01]

Question... If you need 5.50 fill up your mols what is the calculation. with 10:3 ratio how many oz does that mke

[@Toonpish]

550 grams to fill your mould in total You need 275 grams of liquid and 916 grams powder Hope that helps This video shows how I got this calculation kzbin.info/www/bejne/oHrCnWWVqqmZi6csi=7Z79_AFa4dyBwAdA

[@roygarcia4176]

Great review, it’s got me very curious to try it…. Is there any information about how deep you can pour it?

[@Toonpish]

Not on the leaflet no 🤔🤔🤔 interesting 😀😀 Might have to try it out 😀💜👍

[@roygarcia4176]

@@Toonpish please do….. I’m a bit gun shy… I poured polyurethane resin too deep, made a mess and ruined the mold… 😳

[@odettehillier3387]

Hi Wendy, I live in Australia and would love to try this but am not sure where I can buy it. Would you happen to know?? Thanks 😊

[@Toonpish]

Not sure either ATM 😳 it’s only just been released in the US so might take time sadly. Hopefully not too long 🤗

[@jessbarnett7291]

Love this…but as per…how long do we have to wait until this is available in the uk? 😊

[@Toonpish]

A while I expect sadly 😢 but the more people ask for it the quicker it will be 😀💜

[@MIssditto33]

I wonder what would happen if you tried using your silicone inlays with the magic powder?

[@Toonpish]

That’s a project I have tried already 😂😂 I’ll save that for another day 🤫😀💜

[@MIssditto33]

@@Toonpish looking forward to it!

[@samicraftinbitsnbobs3020]

Here in uk can we not get the magic powder from them yet x love the vid makes me wanna try xx

[@Toonpish]

You could probably purchase from the .com website but I don’t know what the postage would be 😳 I have asked when It will be available, But not sure yet 😀😀💜👍

[@samicraftinbitsnbobs3020]

@@Toonpish ty hun ill keep my eyes peeled xx

[@markburgess4528]

Rant mode on My biggest gripe with Lets resin is they don't stock all their range here in the UK. I went to their US site and cant find a way of shipping to the UK. I cannot see this product at all. I wanted some of their black resin but is it in the UK? No! You can't seem to get the 48 colour ink set either. I contacted them direct to ask about lack of products in the UK and was told they only have a small warehouse here in the UK. Must be the size of a shed. Rant mode off. If anyone knows different please let me know.

[@Toonpish]

I totally understand your rant. I will pass on your comment 😀😀 hopefully things might change in the future 😀💜

[@markburgess4528]

@@Toonpish Thanks Wendy. In no way being disrespectful to you but I find all these companies send stuff to KZbinrs, you think I'll try that but are unable to get hold of it easily if at all. It seems companies like Lets Resin and Jdiction only keep basic 'bread and butter' items in the UK.

[@debrabradford3344]

Wendy, where have you been? I don't see you on here very much at all anymore?

[@Toonpish]

I’m still here and still putting videos out every week 😂😂 not gone anywhere 😀💜💜

[@lechatbotte.]

Eco resins arent resin they’re similar to jesmonite. I love them they’re so fun to work with.

[@Toonpish]

Thank you for telling me 😀😀 they are fun 😀😀💜👍

[@deborahevors4850]

Can you use glitter in this?

[@Toonpish]

It doesn’t work very well at all. I would say no. Sadly

[@sherriejenkins6737]

Wonder if you could use dye?

[@Toonpish]

🤔🤔🤔 what sort 😀 I don’t know 👍💜

[@sherriejenkins6737]

@@Toonpish I was thinking RIT because it is soooo pigmented…..🙂

[@bonniemcintyre9575]

It looks like plaster of paris

[@Toonpish]

It does 😀😀😀