Top 5 Servo Systems in the World.

Check Our CNC LASER Cutting Course on Udemy -www.udemy.com/course/laser-cu...
Join this channel to get access to our Exclusive Videos -
/ @ultralaserlab
Hello Everyone
In this video i show you the top 5 servo systems which is widely used for cnc laser cuttings & plasma cutting machines all over the World.
I hope you will like this video so do like and share this video and subscribe this KZbin channel for more regular upcoming updates.
00:00 - Basic intro
00:35 - YASKAWA
02:48 - FANUC
04:16 - FUJI ELECTRIC
05:43 - PANASONIC
06:58 - DELTA
2 k.w fiber laser cutting machine - • Video
Sheet & Pipe Laser Cutting Machine - • Video
laser microjet - • Laser MicroJet - Most ...
Nukon Laser Cutting Machine - • Video
Jewellery Laser welding - • Jewellery LASER Weldin...
LASER Welding Machine - • LASER Welding Machine ...
Laser marking - • Video
For more info you can contact me freely by Join our KZbin Membership
Click on the JOIN button Below Subscribe button or click on this link below
/ @ultralaserlab
mail : [e-mail]
whatsapp [phone]
Instagram: vivek_chaud...
Facebook: vivekchaudha...
Twitter: / vivekch46672161
Website : www.ultralaserlab.com/
youtube : / @vivekchaudhary8942
background music
Track: Crush on You - Next Route [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Crush on You - Next Ro...
Free Download / Stream: alplus.io/crush-you
Adventures by A Himitsu / a-himitsu
Creative Commons - Attribution 3.0 Unported- CC BY 3.0
Free Download / Stream: bit.ly/2Pj0MtT
Music released by Argofox • A Himitsu - Adventures...
Music promoted by Audio Library • Adventures - A Himitsu...
Gang - jiglr / jiglrmusic
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/3iIcADS
Music promoted by Audio Library • Gang - jiglr (No Copyr...
DISCLAIMER
Copyright Disclaimer under Section 107 of the copyright act 1976, allowance is made for fair use for purposes such as criticism, comment, news reporting, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favour of fair use.
If you require any more information or have any questions about our channel please feel free to contact us by email at [e-mail]
All the information on this channel - / @ultralaserlab - is published in good faith and for general information purpose only. Engineer Chaudhary does not make any warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information you find on this website (Engineer Chaudhary), is strictly at your own risk. Engineer Chaudhary will not be liable for any losses or damages in connection with the use of our youtube channel.
By using our channel, you hereby consent to our disclaimer and agree to its terms

[@tanjiro3285]

Great Insight 👍👌😊

[@aswinidas304]

I love it ❤️❤️❤️❤️

[@umargul5644]

Great job sir

[@mirringtone6319]

Very thanks to you

[@anilpatel0209]

very informative video

[@chainhonglim1281]

Hiwin E series is great, have a try.

Wow wow amazing 😁😁

[@jazzyyyjazz1112]

Can you describe the installation of servo motors into cnc machine We trying to build a new machine in house

[@shivautomation]

All one I use.

[@Aladdin672]

wow so the top 5 all made by Japan😮

[@paulpoon7253]

The best is from mix-&-match systems !!!

[@tanjiro3285]

hey passing by people atleast drop a like for the work🙏🙏🙏

[@joediverfl]

Choosing ONLY using the information you have presented here, and removing my experiences, I would choose Fanuc because they are incredibly well built and accurate and they have integrated them into their own 5 axis and robots, as well as the carbon fiber mega wing and blade machine. If I had to seriously consider price, I would buy the Chinese version. There is not enough information to decide about Delta. Panasonic is not used in the states as commonly so I would skip it. As a standalone Servo, there would be no choice at all. Yaskawa has poured Billions into making their servos basically perfect. They would be my overall number one Servo, period. Where the servo maker has incorporated it's motors into it's own complete complex multi-axis machine, like the Fanuc carbon fibre gantry you showed, I would probably choose that, because they are not just offering a Servo, but a fully integrated system, all of which guarantees a complete, perfect machine, built and tested as a unit, making it all work together with the same quality as just the Servo. Great video, truly. Even the advertisement was really good. I think, or hope, that controls and HMI could be standardized for each type of machine group. Thanks again, Joe🙂

[@ultralaserlab]

Perhaps you have the right information

[@joediverfl]

@@ultralaserlab right ingormation, or right idea? I regard India as the best country for producing the absolute best educated people who are also good decent people not like the huge Asian country next door who will lie, cheat, have no morals in what they make, except for a few companies who actually make great products, even if it's because they bought Kuka robotics. China COULD make 100% Chinese machines for the U.S. Market, let us set up marketing and actual factories where we can add all the controls, HMI, programming, maybe about 25% total of the machine. Get rid of all the fake companies who are just buying other Chinese machines and selling them from a warehouse. We are developing a revolutionary new business model with limits on executive pay, ALL THE BENEFITS, and pension and employee owned. Anybody interested in discussing this, especially high quality manufacturers looking to immediately get a large footprint, and somehow, load on as many Indian programmers, researchers, inventors, cad software designers, all the types of engineers and anything I left out. Let's connect, chat. This a life long connection and business model. Get my contact info in my about page. This is to be private as long as possible. PLEASE, let's keep our leaders from destroying life and happiness and families with stupid war fears. Bless you all. Joe

[@abhishekkuksal5700]

@@joediverfl I have tried to build 6th order motion control like the yaskawa's servo (how it was damping the springy system) for the stepper motor with very little success(due to nature of this type of motor ofcourse) but my major role is developing own PLC which I have been doing greatly

[@joediverfl]

@@abhishekkuksal5700 That's great! I wish you great success. All I know about tech, software, CNC, 3d Laser, etc etc, is because I subscribed to every single industrial magazine that is free for the last three years. :) I'm so frustrated, because what I am best at is building up groups of companies. Lost it all, 40 million in real estate in 2010, spent 25 years growing it from profits of smaller companies. I have built an incredible, full spectrum, manufacturing giant, ( just on paper) to be owned by the employees, and the minute I mention that part to ANYBODY, they just walk away. Just never ever give up, I absolutely guarantee that no matter the failures, or the roadblocks, the only single thing that can keep you from creating your dream is to stop. Joe

[@sanatechautomation279]

INVT Servo also very good

[@Ray_Hirth]

What is the max tonnage a Fanuc External axis servo drive can run? I would love to swap a 200Ton trim press scrap dump (trunnion) hydraulic motor with 7th axis servo or any servo for that matter. When we have an estop or drop control power in cycle, the immediate stop inertia blow the motor & gear box seals. I'm 120K over on KPI in water glycol fluid for 2023 due to this issue. This does not include the motor & gearbox repairs, downtime, man power for troubleshooting, man power for R & R and shop materials. Any easy to install but robust drive systems will work. Any recommendations are appreciated!!!! I will agree with the MOTOMAN Yaskawa as the #1 choice. Its harder to program, learn, and use but once its running it is hard to stop.

[@MrFernandoBedoya]

I live in Canada and we use Allen Bradley and Omron servo motion controls.

[@joediverfl]

Yes, they are great also, I agree.

[@soumen_das4354]

Please share the Authorised distributor vendor of Fuji servo system ..

[@sanatechautomation279]

Panasonic bet performance

[@miten.p]

AGREE

[@goformastermind.0002]

B&r servo drive

[@udayjogiwala]

We use mitsubishi servo for textile machinery manufacturing.

[@ERBAJAJ001]

Y not yasikawa?

[@hisuiibmpower4]

kollmorgen,aerotech,copley controls 3 best for pwm amplifiers

I think number one Mitsubishi Electric look the mr-j5 Mitsubishi electric

[@abhilashpatel6948]

Mitsubishi ?

[@ahmadrojali1391]

Sanyo Denki & Mitsubishi

[@carloscipval2750]

Kollmorgen !!!

[@atikahmad3897]

Ser me cnc citing masene bana raha hun relway gaid vale usme kitne pawer ki motar estamal hoge ser jarur batay

[@zeropage]

😯😘❤👍

[@muhammadarslan20]

Yashkawa and delta Also try Panasonic

[@sanatechautomation279]

We deal in and authorised for Panasonic Delta Mitsubishi Fuji Schneider INVT All Products for above mentioned brand

[@prashantstarapure6969]

Share your views on what is servo? Defination or explain servo motor

[@ultralaserlab]

I already make a video on what is servo . You can check in our channel

[@m.abrarzahid8619]

Im from pakistan.. and we use SYNTEC cnc controllers and servo motors..

[@km25405]

FANUC is biggest servo system manufacturers in the world.

[@evergreenblog3782]

Siemens

[@kamleshsoni3230]

Pls give detail abt plasma cutting. Thanks

[@dsakthi1994]

Hi, plasma is one of the metal cutting source like laser cutting, instead of laser here is electrical arcing is used to cut the metal...

[@yogesh9840]

Fanuc

[@masterchief4125]

Where can I buy the Yaskawa servos?

[@LaserCuttingMachine_AcmeLaser]

we use Yashkawa

[@user-st9so6rh6l]

सर जी मुझे Hydraulic pawer press बनवानी है kerpya बताओ सबसे अच्छा ब्रांड कon सा होगा.sarvo motor और सादा motor मे रेट का क्या-क्या फर्क़ होगा धन्यवाद

[@amankalsi7427]

Good information sir ji🙏🙏🙏🙏🙏 but Hindi mein video banao sir

[@KL-gc2hx]

what about B&R ABB mitsubishi resroth inovance?

[@paulpoon7253]

Rexroth

[@alexlo7708]

Western system are for heavy KW power servo which Japan still not reach.

[@miten.p]

I have used panasonic servo systems and can tell u that panasonic has far greater share in indian market as well as in china, also, when comes to routers it is superior to yaskawa and fuji. also, its motors are most compact among all brand u mentioned.

[@abhishekkuksal5700]

Yaskawa has no match, with 6th order motion control and regenerative braking this is far most superior

[@salman_sheikh87]

Mostly in Pakistan we are using mitsubishi

[@PWLopes9000]

I use kollmorgen drives with Siemens motors.

[@abhishekkuksal5700]

Is this compatible? Is it possible to interchange the any motor(ofcourse of same power) with drive of another make? Like siemens - fanuc?

[@PWLopes9000]

@@abhishekkuksal5700 for the kollmorgen drives I can confirm that it works with motors of any other make as long as the feedback system is supported.

[@al-minhazsalman6497]

Please tie the shaft key before moving the motor at such high speed. It is dangerous.

[@abhimanyusingh4281]

INVT

[@atulshukla8058]

Sir alarm ka video

[@user-ei9lu7wc7h]

What is the world best company??

[@mcoregaming1199]

Delta also use

[@pistondrive9748]

What about the weihong servo

[@petri2852]

Mitsubishi and Omron

[@nachossj]

Mitsubishi electric

[@fuzzySlash]

Beckhoff

[@venkatesh6290]

What about ABB Servo system

[@ankitchotaliya8070]

Why Mitshubishi servo not add in this list...

[@petri2852]

It was his opinion. Mitsubishi is great, I use them.

[@siranjeevisiranjeevi4628]

Delta

[@ikehsamuelifeanyi4925]

Is this motors servo motor or stepper motor?

[@abhishekkuksal5700]

Servo

[@matinz5894]

Mitsubishi ☝️

[@dd_Dedsec]

leadshine?

[@pamarthisuri3807]

We need total system

[@aamirkareem5985]

Price?

[@TheMmk1243]

Yaskawa motors

[@singhgurpreet4567]

fanuc,siemens

[@ERBAJAJ001]

Sir kitni accuracy claim karte hai aap apni fiber laser machine mai?? I mean kitne Microns tak?

[@nazigermany1945]

Mitsubishi electric ?!

[@hanzrudel6486]

Te falto siemens, en rwlaidad hay muchos mas, nct, ....

[@nenuchepanugaming4909]

Bro give me elcam software

[@ERBAJAJ001]

Heard about Fagor? 😂😂

[@piotrr597]

Add delta, but not remember about Siemens xDDDD

[@navaneethkrish366]

Where is ABB Robot system

[@binodoraon7125]

Jai bhim

[@pauloyoshizaki2103]

YASKAWA : ROBOT : MOTOR ; FANUC : ROBOT : MOTOR ; SÃO : LIDERES ; MUNDIAIS EM : ROBOTS ; INDUSTRIAIS NO MUNDO ; Hoje ; está em Muitos : Paises ; Funcionando ; Robots : Montagens ; Manufaturas ; Farmacologias ; Comercios ; Trens ; Etc ; Yaskawa ; E ; Fanuc : Robots : Future : Hoje ; Amanhã ; FUTURO !!!! .

[@navjotSingh-yd9ke]

BROTHER YOU HAVE TO RECHECK YOUR KNOWLEDGE, U HAVE FORGOTTEN MANY LIKE MITSUBISHI, BALDOR, BR MOTORS, PARKER, LENZE, SEW AND MORE

[@Xxxxxxx-x7f]

Yes he has no Knowledge in this area, also Siemens be quit

[@sudarshanchetty3757]

Mitsubishi

[@qnxos]

Omron

[@qnxos]

Ctb

[@user-zu1bh9kp1z]

B&R

[@juanbeltran3846]

Indramat

[@eduardomeller4545]

Yaskawa

[@user-ut9qc5vw1y]

台达竟然比三菱还好，我不信

[@indianmaker1805]

Ya bhai English me bol le ya hindi me kichdi mat paka

[@weiallen8548]

卧槽666666

[@goga-ya]

Как это отвратительно звучит , ни хера не понятно...

[@yoashuain1]

I worked on Semens machines, they sucked.

[@gdgobi7330]

Not 100% correct. if there are 1000 CNC machines in Europe only 10 machines may have fanuc. Or the Machines imported from japan or China, Taiwan will have Fanuc. Siemens & Heidenhain controllers & Servos are biggest in Europe and N.American market. 95% CNC machine use only Siemens, Fanuc, Heidenhain, Mitsubushi. Spain & Italy and Big Machines will use Fidia, NUM. High Volume auto component CNC machines in big factories in Europe use Bosch Controller & Servo (Old name Indramat).

[@kaanalklnc2569]

Bullshit.. All systems Asian made, where is European systems ?