Top 5 TORCH Tricks ! | Torch Cutting |

[@nelsonglass3497]

Oxygen oxide the oil…. It break down rapidly , heats up and can burst into a volatile state, fire or explosion…

[@MeltinMetalAnthony]

thank you! good to know!

[@FishFind3000]

@@MeltinMetalAnthony also don’t lube orings when rebuilding regulators as well

[@jordanmorris8033]

Was literally about to comment the same thing. Kinda scary he doesn't know that lol

[@autodidacticartisan]

Oh yes oxygen oxide, the world's most potent oxidizer...

[@harisyoung4110]

@@FishFind3000 what's the reason we shoudn't lube the regulator orings ? even a silicone grease ?

[@cheeseymccheese7249]

I C Weld!!! Nice shout out bro. Ive been watching him for a few years now

[@rob-vz4wt]

I've memorized the victor torch tip chart for tip size and pressure settings. It hasn't failed me yet.

[@PrairieMechanic]

As a heavy duty mechanic I’ve spent years slowly “self teaching” welding off of various KZbin videos and hands on experience. I’ve gotten pretty comfortable with a torch would like to pick up a scarfing tip one day. Thanks for the tips. PS, I’ll forgive you about the comment on the shitty dump truck welds being done by “some fuckin mechanic” 😅😅

[@MeltinMetalAnthony]

Lmao good on you for expanding your skill set! But you will NEVER catch me turning wrenches for $$$ that shit is hard!

[@johndowe7003]

scarfign tips are 118 numbers on victor pick em up on amazon for like 20 $

[@bigb7157]

I honestly could weld a pecker on a snowman, but my torch game sucks. Short of gouging out welds I never touch the torch. Maybe before I retire I’ll get better at it. Videos like this are what people should be watching to learn how real skills are developed.

[@robertfilloramo1992]

Quick connects are pretty slick. Never knew they were avaliable

[@markhammond4610]

Was always taught to remove the tip before giving it a good cleaning because debris could fall back inside torch and reclog tip. Retired now but still watching your videos. keep the sparks flying man.

[@jeremyfiggins6314]

The road dawgs shirt!! I know them pups! Small world love all the tips you give on here.

[@MeltinMetalAnthony]

ALWAYS rep Nic and Robbie

[@downhilldaddy9346]

You ain’t kidding Anthony! I’m an assistant welding instructor and man every year it never fails. All the students want to do is learn to weld plate and pipe. And never show interest or practice on the torch. And in this business, 90% of the weld is your cut. I recommend the oxy fuel settings at oxy 20-25psi and acetylene 5-6psi. Now that’s for general use, for thicker steel, adjust accordingly. Air Arc Gouging is rough on welding machines. Need a 350 amp and up machine. And shout out to I C Weld 🤘🏾

[@MeltinMetalAnthony]

I thought about doing a field repair class, I could just go get broken crap from the junkyard and show them how to weld it. ICwelds is the man!

[@downhilldaddy9346]

@@MeltinMetalAnthony right on!

[@Bits-of-Bytes]

Keep up with the tips and tricks. I am a retiree that now has a farm and I am teaching myself to weld etc I have picked up some good pointers from your videos.

[@gordjohnson70]

Thnx for mentioning I C weld. Now I'll follow him too. Any other suggestions ? "Taylor Welding" is good too.

[@agentfernandez1473]

LOVE THE SHOUT OUT TO I C WELD!!!

[@petetong9670]

Good video fella , my friends and I can slash nuts off bolts and bearings off journals . After lunch we measure.our success.

[@vincentperry5220]

Always positive videos bud

[@jonkellberg6981]

i didn't expect that gouging tip to work as well as it did, have never seen that before. Very nice!

[@MeltinMetalAnthony]

good little trick!

[@shanemiller6947]

Your very much right about using the torch I really suck at it but get the job done lol good job thanks

[@charliehcrew1957]

The reason to not oil oxygen fittings is the extreme fire risk. It is also possible for the oil to ignite when the oxygen is turned on.

[@ShainAndrews]

He knows why.

[@Brandon-bl8ko]

@@ShainAndrews he specifically said he didn't kno the exact reason

[@thomascraig3694]

Yeah. Oil + compressed oxygen = boom! The pressure causes it to self-ignite

[@ypaulbrown]

well done Anthony....cheers from Orlando, Paul

[@mikemaiman3623]

Anthony, FYI oxygen cylinders are charged to around 2200 psi at room temperature. A small leak, especially at the high pressure side of the regulator, would possibly ignite oil or grease if present. The ignition occurs from the extreme FRICTION caused by the high pressure oxygen flowing across the oil. The oil ignites causing the brass, cast steel, rubber, etc to also ignite. This all happens in an instant with a violent explosion causing more pure oxygen being added to the atmosphere. Now there is a total hell storm. Work safe.

[@zachhoyt92]

Me and a coworker were just taking about just that.

[@jeffryblackmon4846]

Good demo, Anthony. Thank you.

[@mcfwelding]

just picked up a new torch and gouging tip. hopefully ill get to use it this week and test them out

[@davidspin5353]

A over size diaper pin is what OG welders use, the carabiner is for the young guns!

[@johnschirripa5675]

Thanks for the advice man 🙌

[@texasplumr]

I use a metal retractable key chain to hang my striker to my belt loop with. I work in some tight places and a carabiner doesn't give if I hang my striker up on something. Also, I'm right handed and adjust the oxygen and acetylene knobs with my left hand so find it more comfortable to hang my striker on my left side so I'm not reaching across my body every time I light my torch.

[@donsmith9081]

I open the handle on the striker and run it thru belt loop.

[@isaacchavezjr5556]

That’s a good idea with the retractable line. I use that for my metal gauge. And I also use the striker on the belt loop idea. I stole that from IC weld as well.

[@lt2996]

Smart. Little things like this go a long way. I leave the damn thing laying around everywhere so that would be good for me

[@Brandon-bl8ko]

IC weld is a wizard with oxy acetylene torches

[@johnmastie]

Thank you for the tips, I’m going to try them when I get a chance. The link to the quick connects sends me to flash arrestors?

[@09FLTRMM77]

MM77 Approved 👍🏼👍🏼

[@MeltinMetalAnthony]

Right on!

[@bobhigginbotham9035]

Excellent Video Anthony! I'm doing some scarfing on an excavator bucket this week 🤘🏼☠

[@shawnlindquist404]

Great video grease and 02 is a bad combo plus it attracts dirt quick connects last about a month at most for me air arc will be the death of your machine don't do much of it with it I got probably 2 days of it coming up this week would be one hell of a video for you

[@whatsnextgarage]

Good stuff!! Plenty of enthusiasm! cant wait for some more cold weather welding!

[@lisalovelylpa]

I just thinking of getting a torch , either the performer kit or journeyman lol I not sure which .. basically use it to make small sculptures like two by two feet. Nice video , down to earth , informative , love the demo of the gouge tip , I think that could be a creative tip , and funny video lol

[@michaelhobden6741]

do you run flash back arrestors on you torches and bottles

[@Lux353]

Love the video glad to see your channel is growing!

[@AndresLopez-km9cr]

Great videos 👌 and very useful tips . I'm just starting to weld for other people for some little extra income and always look back to your channel for tips ... your channel it's just nice🧑‍🏭

[@avrgdude7929]

can i make a scarfing tip from a regular torch tip

[@AdamKing60]

I have a tip and it is something that I am going to get for my own torch set. A hose reel, even a manual hand crank one.

[@imeryalbmert8874]

Have a great day

[@MeltinMetalAnthony]

you too!

[@trailman20]

I'd like to see and hear more about the gouging rods without oxygen

[@MeltinMetalAnthony]

I have a few other videos!

[@zenabu80]

I've had to cut about of I beams up to 36 inch or so for crane bridges and runway beams. You have be accurate on your cut. So when you have a line you have to follow you can preheat from the opposite side of your line. If you have a line on top of your plate, preheat from the bottom.

[@lyleswan6671]

Excellent video. Thanks for the knowledge.

[@tjs_welding_and_fabrication]

What size scarfing tip is that.

[@mk27wrx]

Good video bruz , touch is just practice practice practice , 10 years as a fitter welder and I'm still learning small stuff 🤙

[@bsquadrider]

Great tips as usual! The striker on your belt loop is handy but I've seen a couple guys catch their shirts on fire lighting their torch that way.

[@jeffreyullrich8511]

Is that scarfing tip a Victor Type 118?

[@Kingbib]

Hey Anthony I was wondering what type of respirator you use, and what kind of filters?

[@tntltl]

Thank you for the tips I really appreciate your videos keep'em coming.

[@steveelmes8568]

Nice old ford in the background

[@hubertrobinson8825]

I agree with you torching more difficult than welding I do a lot of welding but not half as much torching I do need the practice

[@jackmioff000]

Those long torches cut completely different and better than short for torches for some reason, I have a Harris and a Victor regular medium duty torches and then I have a Harris and a Victor long torches and both long torches cut so much better than their little brothers on the same gas settings

[@lt2996]

Interesting. Good to know

[@jonathangarzon2798]

Yeah cutting specific torches cut better

[@jackmioff000]

@@jonathangarzon2798 I think it has to do with being able to keep movement away from the head of the torch by oxygen lever being far away. Or it could be the long barrel helps the gasses not be as cold when they reach the tip idk maybe it's in our head

[@johndowe7003]

love the sticks man hahah i need that for my 7.3

[@calebr6761]

I'm in highschool and in my welding class we use the scarfing tip to cut off the back plate of the certification tests and it's way faster than using a chisel or air hammer

[@chrissample3047]

Good tips

[@osbaldohernandez9174]

I need to learn how to properly cut out circles

[@justintasht1067]

Another fantastic video spot on. I’ve never used a touch before but found this video real interesting love how you explain things full respect 👍👍👍

[@shadow_stalk]

this was a nice video! im not a welder im just a machinist but id like to do at home projects and fabricate something but i also dont wanna go to school for something id do for a hobbie! i dont have to many welding buddies so theres not many options for guys like me who just wanna try it, other then watching a video or two!! so these are helpful tips and tricks but i plan on getting a book or two from the library but the hardest part for me wasnt the PPE but it was where to get material!!! any suggestions on where to buy material that wont cost an arm and a leg?? i thought about making my own forge and forging some steel plates from junk left in peoples trash lolol so thats a whole nother thing ive been learning and trying to get into... any kind of advice for a hobbyist like me??

[@valleybarbell]

Great video. Thanks for the information

[@Skeetmgeett]

Plasma gouge would be another option that would be easier on your trailblazer

[@bmlennox]

Anthony have you ever thought of outfitting a welding trailer to tow behind your truck on bigger welding jobs? having a covered trailer set up as a metalworking shop may be nice if your job requires more fab type work. Having a metal chop saw/grinder etc would make some jobs a bit easier too(hint-buy the biggest trailer your truck can pull cause once you start filling it with tools it will always be too small-good place to store your backup welder/generator too!)

[@miguelpistolas4849]

That washing tip works , we used as a shipfitteer long time ago , arc gouge is beeter but used with somebody else machine cause it will mess it up 👍🏽

[@clintonhanson]

Hell I’m a retired iron worker and never messed up a field machine because of running air arc. Running carbon arc is no different than running stick electrode to the machine anyway! As long as you’re not running your machine at full amperage for days on end you’ll be fine!

[@miguelpistolas4849]

@@clintonhanson well i understand it all depends how long you use it ,, like we get rentals on refineries gouging for a week or two 3/8 1/2 or bigger rods 24 hrs n after that no good to weld is just depend If you backgoige 40 or 50’ diameter 2” metal thick tanks i know it i burn em all tge time

[@clintonhanson]

@@miguelpistolas4849 and so did I for over 35 years never had a machine die from gouging it’s the same as when welding dude you weld with it maxed out for hours and days on end!!

[@miguelpistolas4849]

@@clintonhanson i dont know wath kind of work u do but we givenm hell we dont goige with 300 we use 500 machines all im saying is i never in mi right mind ise my welding machines goiging any welder know that but u had a different story i respect that 👍🏽

[@clintonhanson]

@@miguelpistolas4849 they’re made for gouging my friend… ANY WELDER KNOWS THAT!

[@dylanbennett3851]

I noticed your plate is Florida, I'm near Panama city. Where abouts are you at?

[@moejr14]

I just bought an oxy torch(idk why, maybe because I thought it was cool to have) . It came with a rose bud attachment and I’m trying to find out what size it is to adjust my Oxy acetylene accordingly. Any help to figure out my rose bud size and oxy/fuel settings.

[@mitsosgeo845]

Start your cut with pressure on .take away your hand away from the button of pressure puss it once and it hold to automay mode so you can move your hands free .hello from Greece.

[@JR-pd9xz]

need your help - I pre heated - started to cut, then 1/2 way through it seems the flame stalls and no cutting - what am I doing wrong?

[@889976889]

Torch is critical for any field guy especially in heavy equipment field

[@stovepipe9er]

What kind of torch are you about to use at 5:20?

[@peetky8645]

waiting for the first snowmobile repair

[@tomasmerino1039]

The reason to not oil oxigen connections is you would be adding a fuel to the oxigen source, instant fire hazard lol same goes to the threads on the cilinder cap

[@fettmaneiii4439]

thx man!

[@darcymcnabb9259]

Use a dirty tip for washing out metal. And around 20 psi oxygen about 3 psi acetylene.

[@SergioPena20]

My welding teacher taught me that when using a scarfing tip, you lay the brass part of the torch down and then roll the tip down to melt away what you need.

[@JNaimoli]

I know im a little late to the game here!! but the link for the quick connects seems to just go to flashback arrestors

[@MeltinMetalAnthony]

thats weird! ill fix it!

[@blueweld75]

You can bring value to our lives by telling us about that green maybe 77 F-100 or F-150!!! Also you dont put petroleum products on torch stuff cuz of the oxygen and it could cause and explosion. Along with welding inspections I do O2 cleans on vavles and stuff like that. You take a black light and look for grease and lint. Anything that oxygen could could cause ignition from going through a valve (like on your bottle with the regulator) and the oxygen could cause heat source from going through those valves and such. Then with the petroleum products , it can explode . It does happen and you can do more googling for more info .

[@donaldspencer7016]

You know your cutting right when you hear the ripping sound.

[@connorshoemaker2466]

I always avoid torching because I’m honestly really bad at it, and I’d rather plasma cut. Maybe after these tips I’ll actually try to practice😂

[@JohnStrandt]

There is no need to preheat before a cut. Also, don’t pull the torch, sweep it (right to left for right handed fellas). You will be able to make a much longer cut comfortably.

[@WujoCaZa]

Nice. I change my work to service a steam turbines and now I wanna teach using oxy torch :D

[@jeremyhale5356]

Hey I know this is off topic lol but I just started watching your KZbin channel and I got a tip for quicker clean up if you can find a metal coffee can are a #10 metal can you can throw your electrode tips in and other small tidbits I use them all the time smach the top and sell for junk

[@theodorebowers9737]

👨‍🏭 T H A N K ' S great 👍 Video again , a l w a y s 💖 them ! you put a lot in Making them. I do like to hit the like 👍 in yours. You Certainly do deserve it they are good and I learn a lot. WHO SAID you CAN'T TEACH an OLD DOG NEW TRICKS , I know I'm old

[@a-yates]

Working in a factory I have a love hate affair with the torch haha depends on the job

[@GKRTANKLINESLLC.]

Good Shit my guy!!!!

[@tomasalvarado207]

😎👍

[@ewanmcalpine2393]

Fire needs 3 things - 1 Oxygen , 2 fuel [ do i need to say more ??] 3 heat . There's usually a lot of heat around the torch .

[@BruceLyeg]

My father was like an artist with a torch. Me, not so much. I use plasma 90% of the time

[@dougpersell8776]

Harris torches? John Harris invented the cutting torch in 1899. The big deal with oil around a torch is if you got some inside a torch when the bottles are turned on and the oil is compressed buy the presser hitting it . Then it can ignite just like fuel inside a diesel engine.

[@ShainAndrews]

You still hold your torch too close to your material. I get it. You were probably trained that way, I know I was. The cones become a cut guide (crutch). That 3/4 plate you cut. The near end when you lifted your torch. It looks better. Spend a lot less time cleaning tips too. One thing Issac taught me. Leave the standard torch on the truck. He only breaks it out for due to space constraints.

[@skipwaelty3974]

Do you ever use propane as a fuel. If so what are your thoughts?

[@RwP223]

I counted 17 tips

[@TomFromYoutube]

My boss calls them gougers wash tips.

[@deant876]

You know what we learned today? We need to watch I.C. Weld instead of you. Just kidding I watch you both.

[@dirtychina5331]

I see the pros push the torch so the drop falls away from their feet.

[@peetky8645]

it is always about tip size...or at least that's what she said

[@BobGriff-o9s]

Have. Had. Trk. Over. 60. Years. Torch. 5. 40. Miler. Welders. Taught. Welding. Nothing. To. It. Cat. Repair. Alll. Kinds. Welding. Good. Veto

[@autodidacticartisan]

I remember when I was first learning how to stick weld, the old timer that was teaching me was a really cool guy and one day I come up to him cuz I'm having trouble striking an arc and I say, "hey Mason, what's that trick you showed me the other day about striking an arc easier"? and with no hesitation he turns around and he tells me, "tricks are for whores and magicians. it's not a trick if it works every time".

[@vancebenito8466]

Another tip practice on Metal your going to use dont waste money

[@ProleDaddy]

Jeez, guy, drawing me in with that 20 most inappropriate babe pics ad...

[@winstonlewis9949]

Everyone please trust in Jahovah forever in the name of Jesus christ forever amen.

[@charlescrljenko4089]

Might work for HIM but the . Tip is way too far & way, Too much with the Preheat on that small Flat Bar. Even the Cut was like he Melted through. His Torch settings are Close but Impractical. Said his Tip was clean but when he hits the Oxy Accelerator you can see the unconformity in the Flame. Should be set at 6 Gas & 32 Oxy up to 1 1/4" plate. using 00 or 0 TIP. You just change Torch Angle & speed for best results.

[@properaussie331]

Australia : “quick connects” banned. Australia: every single fire item tested quarterly: hose, flash back x2 on each lead , tip, lines, regulators etc @ $7,50c per test per item . Flashing beacon on vehicle Reverse alarm Wheel nut indicators All bottle regulators off while drive on roads Quarterly checks on electric grinders Quarterly check on welders Australia has the highest shortage of boilermakers in the world due to the amount of tests and checks before we can put gloves on. Hence why Australia can’t manufacture anything and we have to import it

[@MeltinMetalAnthony]

Communism sucks

[@vancebenito8466]

Just put acc on 10 oxygen on 40 work your valves from there it's not that complicated been doing welding for fifty years your a adalesson

[@SouthernGround]

"lube on oxygen" I don't know why " 😳😳🙄, stopped watching 💥🤪💥🤕or💀, look it up bro.