Topaz Advanced Pre-wash with Karcher K7 Part 2

Topaz Advanced Pre Wash is a product primarily used in automotive detailing to prepare the surface of a vehicle for further cleaning or detailing processes. Here's a general guide on how to use it:
#insta360 #detailing #insta360acepro
@TopazDetailing
1. **Prepare the Surface**: Before applying Topaz Advanced Pre Wash, ensure that the vehicle's surface is cool to the touch and parked in a shaded area. This helps prevent the product from drying too quickly, which could leave residue on the surface.
2. **Dilution**: Depending on the concentration of the product and the level of dirt or grime on the vehicle, you may need to dilute Topaz Advanced Pre Wash with water. Check the product label for specific instructions on dilution ratios.
3. **Application**: Once the product is properly diluted (if necessary), apply it to the vehicle's surface using a foam cannon, foam gun, or sprayer. Start from the bottom of the vehicle and work your way up to ensure complete coverage.
4. **Allow Dwell Time**: Allow the product to dwell on the surface for a few minutes. This dwell time allows the active ingredients in the pre-wash to penetrate and loosen dirt, grime, and other contaminants, making them easier to remove during the wash process.
5. **Agitation (Optional)**: For heavily soiled areas or stubborn contaminants, you may need to agitate the surface with a soft-bristled brush or mitt. Be gentle to avoid scratching the paintwork.
6. **Rinse Off**: After the appropriate dwell time, thoroughly rinse the vehicle with a strong stream of water, starting from the top and working your way down. Use a pressure washer or a garden hose with a nozzle attachment to ensure thorough rinsing.
7. **Inspect and Repeat (if necessary)**: Once the vehicle is rinsed, inspect the surface to ensure that all dirt and contaminants have been removed. If necessary, repeat the pre-wash process for any areas that require additional cleaning.
8. **Proceed with Wash**: After using Topaz Advanced Pre Wash, you can proceed with the rest of your vehicle washing process, such as using a car shampoo, clay bar treatment, or other detailing steps as needed.
9. **Final Rinse and Dry**: Once the vehicle is clean, give it a final rinse to remove any remaining soap or residue, then dry it thoroughly using a microfiber towel or a blower.
Always follow the manufacturer's instructions and guidelines for the specific product you're using, as application methods and dilution ratios may vary. Additionally, ensure proper safety precautions, such as wearing gloves and eye protection, when handling automotive cleaning products.
Topaz Advanced Pre Wash Link: thetopazshop.com/products/ext...
Unleash The Power Of Kärcher With Topaz Advanced Pre-wash Car Cleaner!
Please remember to Subscribe to my channel it’s free
▶--------Coffee or Help with cost of Products -------◀
If you fancy buying me a cup of coffee to help and support the channel, then here is the link :
www.buymeacoffee.com/autoglea...
All donations will go towards improving the channel. Thank you very much, Steve
Some Playlists :
Karcher Products Link : • Karcher Products
Worx Products Link : • Worx Products
Cleaning Products & Reviews Link : • Product Reviews
Cleaning & Detailing Link : • Cleaning | Maintenance...
Ford cars Vans etc link : • Ford | Focus | Escort ...
Shark Cleaning & Products Link : • Shark Cleaning Products
00:00 Introduction
00:20 Topaz Advanced pre wash how to mix
00:58 Applying Topaz Advanced pre wash
01:42 How to remove Topaz Advanced pre wash
02:56 What is my thoughts on the products?