#toposolve

[@removechan10298]

Really interesting take and presented well

[@grimmcreeper192]

I’ve had mesh machine for a while now. Probably only used it twice, compared to using Hardops everyday in almost every model. It’d be cool if you could do more mesh machine + hardops stuff

[@masterxeon1001]

its time will come.

[@Tofos94]

My very first video from you in my youtube feed and go in expecting to expand my horizon about meshmachine but come out with an existential crisis. Nah I'm just kidding, very informative :) I dug a ditch for years too. Never again.

[@kelheorslab2114]

MESHMachine 0.7.2 - Can't find Offset Cut, only Offset. Did you use something else to enable such an option?

[@kelheorslab2114]

Found an answer - have to enable Experimental Features in addon settings.

[@masterxeon1001]

bingo

[@MichaelFlynn0]

@@kelheorslab2114 where can I find this "Experimental Features in addon settings."

[@thecatfig6187]

Very good at fixing curve for bevel . Is it possible blender modeled like cad?

[@archiplanservices3746]

Yes and no, it's not a Cad software but with addons and workarounds it's possible.

[@masterxeon1001]

only one way to find out.

[@breakthestress]

Is there a way to use mesh machine but keep the 1,2,3 hotkeys for the different edit modes, instead of pressing tab to bring the pie menu? Thank you!

[@masterxeon1001]

they dont interfere with mine. Sounds like machinetools instead of meshmachine

[@breakthestress]

@@masterxeon1001 ahhh that's why haha I'm gonna get into meshmachine then. Thank you so much for putting out such amazing content ❤

[@onjofilms]

@ 2:00 why don't you use MeshMachines edge loop select? Y > Lselect. It works well in this situation.

[@masterxeon1001]

old habits die hard.

[@ferhat3223]

Hi there, which theme you using?

[@masterxeon1001]

one of the defaults.

[@rsher_digital-art]

Why dot just model in a nrubs program?

[@masterxeon1001]

those options have their own problems. I leave those options for users to explore. In the end it would be converted to mesh anyways. Whatever gets it done I suppose.

[@monles2352]

Thank you for this tutorial!!!!

[@masterxeon1001]

Glad it was helpful!

[@Tooglespark]

In order to select edge loops that are broken, you can use MeshMachine. You Click one edge in edge select mode, then alt-click the next edge in the loop you want. MeshMachine then tries to select the entire loop regardless of Ngons, tris etc.

[@masterxeon1001]

its often in the way more than it assists me. But i still try to calibrate to it. Old habits die hard!

[@donaldkhogan]

@masterxeon1001 I'm sorry dude but I just started watching your topology series (LOVE IT) and I don't know how to do that edge protection macro you are doing. It's not working for me while I try to follow along.

[@masterxeon1001]

I discuss it many times over the course of this playlist. kzbin.info/aero/PL0RqAjByAphH9emGFNAcha1prKi1P_I3n Ctrl + B bevels with the hotkey of P for profile in tool and 2 segments to space edges out protecting the perimeter. Bevel can also be adjusted post operation in the F9 panel. Just change the shape parameter to 1. The hops approach is discussed here among many places. kzbin.info/www/bejne/mZKuenyue9t8ibs

[@donaldkhogan]

@@masterxeon1001 Roger that, thanks so much for the reply! I tried that and its not working. I think the problem is I'm traveling and I'm working on my old MacbookPro, I've got 2.93 installed and the latest plugins but hotkeys are not the same...

[@darkobakula5190]

I just wake up and eat polygons... words of wisdom to live by.

[@masterxeon1001]

*munches*

[@matthewfetsch4736]

good lord that topology was eventually beautiful.

[@masterxeon1001]

it gets there!

[@dannankelly]

maybe use edge flow addon to sort that topology where both cylinders meet :D :p

[@masterxeon1001]

aw yea!

[@Mtojay]

that offset cut tool is just beautiful

[@masterxeon1001]

i pushed for it to make it out so hard. It was too gud.

[@Kholaslittlespot1]

Thank you master! *Bows in homage* (Looks like I need to update meshmachine- no offset cut in there for me yet)

[@masterxeon1001]

enable it as an experimental tool in prefs.

[@peaceloveforever88]

cool

[@masterxeon1001]

tanks

[@Serhii_Sirko]

& u can use mirror)

[@masterxeon1001]

mirror tiem!

[@okuniewiak]

We like to watch when U eat poligons. More MM + Hardops vids.

[@masterxeon1001]

they'd be too short.

[@xx_cinico_xx]

amazing ¡¡¡ just wake up and eat polygons ¡¡¡¡¡

[@masterxeon1001]

crunch crunch

[@DarkFacts11111]

You saved more lives than covid vaccines xD

[@masterxeon1001]

but only if you take it!

[@Logically_Fallacious]

This video may be why 4MM ppl in just August 2021 "quit" their jobs never to be seen again...

[@masterxeon1001]

spirited away

[@Logically_Fallacious]

@@masterxeon1001 Are you using K cycles? I just tried it and I think it's better than E cycles, but Idk if better than Keyshot, though I'm gonna try to use Marmoset first, cause memories of baking? Hmmmm, bread... // to your point// Oh, so like the Toltecs achieve in a Carlos Castaneda books... a climb into the infinite!? _The Teachings of Don Juan_ and it's NOT that Don Juan... but then again... Those books were fun. If only they were true. It was great for Carlos to get LOTS of chicks to sleep with him, (so maybe Don Juan?), but only for him. He even had female body guards and made up his own martial art. It was funny as hell to watch them do stuff... it looked like modern dance, you know the dancing that looks like ppl are on crack or heroin. The everyone gets a trophy lack of skill you wonder why they do this in front of you or in public kinda stuff where Art critics try to make you feel bad when you cry out, "What is this shite!?" If ppl are disappearing into the infinite, I feel left out, yo.

[@memnok9980]

First. :p

[@masterxeon1001]

and last.

[@threadlington3430]

Or just learn how to do it properly with no n-gons.

[@masterxeon1001]

thanks!

[@-PhilGibson]

dunno about u guys but i learnt nothing