Toyota Corolla Chevrolet Prizm Headlight Bulb Replacement

[@jamesfinton9267]

I know this was posted 8 years ago but I just want to say this video was really and truly useful to me today. Thanks

[@RichpinTv]

The video is never too old if it helps someone.

[@josephrohrbach9968]

Many thanks! The 99 Chevy Prizm has all the same parts, just arranged differently, but all the steps you showed worked perfectly.

[@triciap1874]

Since my knowledgeable husband out of town, I'll have to take care of my own headlight. Now I have the confidence it will be a breeze! Thank you!

[@lynnbennett6661]

Great information! On 2001 Chevy Prizm, RIGHT headlight, I found it quicker/easier to remove two 8mm bolts holding heater fuse box and enter the headlight housing from the rear. Your clear display of how to remove the rubber boot and unlatch the bulb make it VERY easy work. On the LEFT side I would have had to remove the car battery and your method would have been the much quicker method. Thank you so much!

[@FunnyClipz1000]

I just amazed my family by replacing my bulb in about 12 minutes. Thank you!

[@RichpinTv]

+Lucys Training Channel I am glad to hear that.

[@jenniferw3953]

The best visual and audio instructions I've bumped into. Thank you for sharing

[@RichpinTv]

Glad you enjoyed it!

[@charlesgangel8370]

Excellent video with very clear instructions and guidance. You made the job easy - I did both, and it worked like a charm!

[@jermon2575]

Thanks man. This video helped me change the headlights in my very first car. I appreciate you.

[@Shaminy-fb5cd]

This video was very helpful to your female demographic!! I greatly appreciate it😊

[@RichpinTv]

Glad it was helpful!

[@terenceada9140]

Thank you for the video, very detailed and well put together. I was able to replace by bulbs in less than 15 minutes.

[@johnjones4453]

Nice!!

[@aerussel]

better than the other corolla headlight replacement vids on youtube, thanks

[@RichpinTv]

Wow, thanks!

[@jimrupeika3092]

Very GOOD and informative video-I tried changing the bulb before I watched your video. Couldn't figure out how to get the housing off Ended up taking the screws off the spring clamp-which fell off and I couldn't figure how to put it back on- Your video helped me a lot!!! Thank you!!!

[@grayisgood]

Your videos show things clearly and explain things clearly. Thank you!

[@diannelunn6740]

Thank you for the video...I was able to replace the bulb and it works! Whoo-Hoo!!

[@xdecatron2985]

Just changed my headlight. Thanks for the help!

[@Cqle.]

Damn. Did both in about 15 minutes thank you!

[@RichpinTv]

Glad it worked out.

[@schm147]

I was able to do it without removing the headlight assembly OR the battery. I just removed that little plastic black air scoop thing (twisted and pulled) and that gave me enough room to get my hand in. I just needed a flathead screwdriver to assist with getting the rubber dust cover off and then a strong flashlight pointing through the top to see which way the retention clip comes out. I also made a note of the orientation of the connector and the bulb itself (no flat pin on the bottom, only sides and top)

[@Crescentmoonschool]

Thank you for posting this! It was very helpful!

[@SlingingLead]

Fantastic video! Thank you very much.

[@juxtopose]

thank you very much, I was having a big problem on that spring wire, and never knew that I only have to push it a bit and slide to remove the bulb..

[@davidjalvarez5790]

About to do this. Thanks for the helpful video

[@yuriyklochenok6699]

Very good explanation, thanks

[@clarityy1082]

Thanks! Didn't realize there was another tab on bottom. Couldn't figure why it wouldn't disengage.

[@brittanyfinch2778]

thanks for the video! it was very helpful.

[@df56gh4d5h]

All fixed thank you very much!!!

[@RichpinTv]

Great to hear!

[@slowgoat6089]

So you don't have to take out the bumper like other videos tell you to do? Im tryna change the headlight housing, only the white light not the side lights.

[@ljgsuper]

in the Prizm owners manual it says to unbolt that left bracket that you pressed on the tabs

[@FunnyClipz1000]

+ljgsuper I pushed in the tabs. It worked great. Snapped off, Snapped back on

[@ulisesvillanueva-vasquez7479]

You have video about of how change headlights sockets of same car🤔👍👍

[@deadcy989]

Cant get my low beams to work but the high beams do. no broken fuses. think its the bulb type or what?

[@YTuberosity]

I'm sure this could be done without removing the light housing?

[@jlaux42]

It can, but it takes some dexterity and doing some things by feel/touch, all while making sure not to touch the glass on the bulb (which is the way I've always done it). I might try the method in this video, next time.

[@Biostasis5x7]

great video.

[@HectorPerez-hr2zg]

Is the headlight on a 93 geo prizm the same as a 93 toyota corolla

[@Joebull419]

Lot easier if you take out the blinker 1 screw on top for blinker

[@facil449]

hello, you no have one video of who change electric conection to of bulbs of same car

[@chaii_latte]

Hope this works on my 2001 Chevy prizm.. I'll try tomorrow.

[@jbagz7956]

Thank you!

[@stewartpeatross4718]

Thank you.

[@4thstooge75]

Note: the Chevy Prizm & the Toyota Corolla headlight assemblies (1998 - 2002) do not interchange The corolla has a lower bulge that on the Prizm is flat across the bottom. Too bad as the Prizm units cost at least twice as much as the Toyota ones.

[@rhammerschlag]

Thank you!!!!!!

[@12vgs8606]

I thought Toyota will not be making bulb replacement that complicated. Is this required on the Chevy Prism? Was there no way to take the bulb out without taking off the housing or you did it to show us better? Or you would have to remove the battery and battery tray to remove the bulb from inside?

[@richpin3041]

On the left side you could take out the battery to get at the bulb.....but.