Toyota Tacoma H4 (9003) LED Headlight Install - Hi/Lo Beam

[@Rjako]

Nicely done! Your attention to all of the small details is currently unmatched! Thank you....

[@jasonblalock5274]

This is one of the best DYI videos I've ever seen. Kudos very good job with the camera and the description. Just a side note don't use WD-40 as a lubricant use an aerosol silicone spray.

[@zepourriable]

Finally a smart, pleasant video about led lights. Dude is very knowledgeable

[@MyWatchIsEnded]

Best review and explanation of an LED headlights I've seen yet. Thanks!

[@dial2fast]

Really appreciate your comment. Cheers!

[@appstate1996]

I've been looking for a video like this. I have some Lasfit LEDs coming for my FJ cruiser. Unfortunately, there are no good videos for Lasfit bulbs that show the installation. I contacted the company and they referred me to the two crappy videos I already watched. They said that is all we got. One of the videos actually have them cutting the rubber boot to get the light bulb to fit. I'll have to use the Lasfit bulbs when they arrive, but I wish I saw your video first. I would have bought those bulbs. Thank you for doing such a helpful installation video!

[@Yobjaugjuag]

I just installed a pair of these LED bulbs on my 2004 Tacoma 3.4L 4X4, and it was a direct fit. I did not have to trim the notches at all.

[@germanbenitez101]

Yobjaugjuag Lis how do you like the new lights? I have a V6 04 as well and want some plug & play LED bulbs for my headlights. Did you have to adjust height of bulbs as well?

[@marissatigil1620]

Thank you! Was wondering if it would be the same for 1st gens.

[@KTB2199]

I know this was wrote 3 yes ago, but did u have issues with the lights after about 2 weeks?

[@caseyhahn7972]

Thank you so much. I was able to install with confidence after watching your video .

[@frankbiz]

I have a 2008 Toyota Highlander and have been researching a dozen or so LED headlights to find the right one. Your video answered all my concerns and these are the bulbs I’m getting. They match the original bulb design for the proper light pattern which is so important. I see so many incorrect ones blinding me every time I drive at night. It looks like their high beams are on and they are not. So glad I found your review. Gave you a 👍 and I subscribed.

[@jedimindknight]

I watched the first half of this video, went and bought some and came back. I have been researching a while and while I couldn't find this exact one, discontinued I think, I found a similar one with all the same specs. I also have an 08 highlander by way. If you happen to see this, did you pass safety inspection? I've heard of some getting failed, but I read into the specifics of it and these should meet all requirements.

[@Rumeel12708]

My old led auxbeam f16 gave out so Im thinking of either buying some like these either nineo II or buying single projector housings that convert to a h1 bulb. My turn signal bulbs burnt the plastic inside so it would make the whole housing look new and clean compared to just new LEDs with both LH & RH turn signal plastic burned. Obviously bulbs are cheaper than buying both headlight housing but that projector cut off is amazing.

[@vanguardsmithing7501]

Thx! Mine didn't need filling out adjustments but it definitely cleared up a few of the steps for me

[@reedrancho]

Very Cool. Glad for the tips about the adjustments needed to the boot and plastic part . Knowing this going in makes the install much less hassle free 👍👍👍👍

[@dial2fast]

Really appreciate your comment on this video. Have a great day!!

[@catlady8324]

reedrancho “Much less hassle free”? You are using a double negative, meaning it will be very much a hassle!

[@brandonwright2067]

I love the fact you don’t have projectors like some of us because all other reviews use projectors very good brotha.

[@whatfreedom7]

Wow I’m really surprised a company made a LED this cheap and put so much thought into their design. I just ordered a set of OSRAM night breaker lasers for mine but if they don’t work out I may buy these.

[@whatfreedom7]

I wouldn’t be surprised. Have you done a led swap by any chance?

[@whatfreedom7]

That’s ok I’m just curious what brands people have used and what kind of results they have had as far as throw and projection pattern in a halogen housing.

[@Sedonalegendhelenfrye]

Great insights, nice truck, and loved the night sounds, we don't get that in Santa Fe. Thanks for the video!

[@retailplus3186]

Thanks for the tip of the position of the shield. I was having a really hard time with the bean pattern.

[@kyleadrane3969]

Yygtyu hff gybggykj

[@sandip4570]

It's a very nice, helpful and most importantly informative video. Thank you dial2fast

[@marsinbako8491]

This the same one I got 2.5 years later they still going strong.

[@willnate35]

Excellent tutorial. Your video helped me a lot. Thank you.

[@whatfreedom7]

We are going to need welding helmets to look at these lights if they keep getting brighter.

[@limamantapachitas]

The right side always supossed to be lower for oncoming vehicles on the opposite road

[@astindersinghera766]

Glad to find a low/high beam led. What brand is this please and where can I buy them from. Great video, well explained.

[@Rjako]

Does anyone know why L.E.D. bulbs won't have a high beam when installed on my 2002 Toyota truck? Plugged in either way, there is still no high beam? Do I also need L.E.D. taillight bulbs for everything to work? Thanks in advance for any info....

[@osmanfarooqi6142]

Dear Dr Foster Your review really helpful. Can you please review the Photum H4 LED as well as they claim road legal beam pattern as well as 300% more light

[@luizbaguio7638]

Hi did installed my led but my DRL light is not working? Any ideas how to fix it

[@vfxtutswithdan1893]

Very informative. Great installation tips.

[@ironwolf3699]

Thanks for the guide!

[@JasonMichaelKotarski]

Great job on the video, I realized I did the housing wrong, BTW the clip is most likely one of the worst designs I've ever seen. I think my hi beam and low beam are reversed, could it be possible that there is a difference between left and right?

[@EnderSlayer1301]

I installed leds on my 02 Tacoma but the fog lights won’t turn on

[@robbiesharp311]

Thank you buddy.

[@muhoshque]

waao thumbsup that was brilliant ,thank you

[@Twintania]

hi, do you know where i can get a PDF of the original manual? need to adjust these I bought a few weeks back but cant find the manual

[@Freeguy2utube]

Hi how about the DRL will run half power of the high beam in day time will they work in your car? Thanks

[@danielonofre7948]

u explains everything two thumbs up

[@dial2fast]

Thanks for your comment!

[@EffDinero8]

Excellent detailed video!

[@TheBennynyc2]

Are they still working three years later ?

[@nolanconlin7236]

Great video! Any idea if these will work on my 2014 toyota taco off-road?

[@pjhorton21]

Very helpful. Thank you!

[@preethamkumardh1115]

Nice review and like the installation explanation.

[@mishammer9698]

So the metal has to be on the bottom then jot top? How to lower headlight down

[@Rjako]

Where can I buy these specific bulbs?

[@JosePerez-on4wc]

Awesome! Ty for the tips

[@KevinGonzalez-fx6mm]

Can you turn on your fog lights though??

[@ivanbnv8354]

at what time is the original bulbs wall pattern?!?

[@markmakko7597]

I wish you would have taken a video of the beam on an open area vs on the wall

[@06kauaiboy]

Help a lot my dude.

[@southcreekoutfitters]

I can’t seem to find the bulb you’re recommending on Amazon. Would you mind sending me the link? Also, do you have a bulb for the fog lights?

[@dial2fast]

Sorry for the late reply, here is the new F15 series (H4) LED light: amzn.to/3txzUMB

[@randomlybruh]

Great demonstration! Did you have any flickering issues?

[@dial2fast]

No flickering. You should not get any flickering on LED bulbs unless a LED chip is defective.

[@HdaTyp3R]

So how long did the led lights last?

[@pedroruiz427]

I change my light but now my high beam light on my dashboard wont turn on

[@germanbenitez101]

I have this same problem. Hoping anybody has suggestions? Do we need a resistor?

[@preet22able]

Some people saying dust inside the headlight with led fan is it true ?

[@Rjako]

Where's the link?

[@anthonymarrone7444]

What year Tacoma is this?

[@ExauRockz]

THANK YOU! I THOUGHT THEY DIDNT FIT lol

[@jvaltierra6665]

Did you have to add a resistor to the leds to prevent blinking of your light.

[@dial2fast]

No did not.

[@jvaltierra6665]

@@dial2fast great thanks for the video, and the info. I will be going g with these bulbs.

[@canamjunkies2319]

Have these headlights caused your radio to mess up

[@dial2fast]

+Canamjunkies 23 No

[@canamjunkies2319]

Thanks

[@brandonwright2067]

Canamjunkies 23 I noticed it causes my cars radio frequency to mess up a bit

[@Xplicit_fpv]

How was the light on the road?