Toyota Tacoma Repair Series Part 11 | Front Suspension Rebuild +Ball Joints and Shocks!

[@UltimateToolReviews]

So replacing parts on the IFS is doable, but definitely tricky. Here are the parts I used, remember this is only for the 2.4l, 2WD models of the 1st gen Tacoma. IFS kit, includes most hardware, but you need to get the main bolts (for the lower ball joints, 4 bolts total) from a hardware store, get the best you can find. - amzn.to/3ZRUVxU Front and Rear Shocks, easy install - amzn.to/41McDVV Driver Side Spindle - You likely won't need this, but I had a bolt stripped and this was the easiest option - amzn.to/401YsdZ Thread Locker - Use the blue and recheck these bolts a few times after you install the new parts - amzn.to/41McLET I ended up not doing a leveling kit, because they changed the front suspension so much that I needed to get new lower and upper control arms to properly align it. Yeah, this whole thing was a nightmare, spent a full week after work doing this. Any questions, leave a comment below and I will answer it the best I can, thanks for watching!