Toyota Tundra and Sequoia Driver Bottom Leather Cover Install

[@lancecmiller805]

I've read your response that you don't have seats for 1st Gen Toyota Sequoias due to the time, effort, and research it takes to produce your impeccably recreated replacement covers. I can attest that your quality is that good! I've used your covers to replace my seat on my dodge ram when a bear decided to have a look around. I just want to put in there that I've been looking for years for the 1st Gen Toyota Sequoia covers, so here is another customer eagerly hoping you will create these. There is a definite resurgence in older Sequoias and they last forever, so hopefully you decide to offer the covers. I imagine demand is pent up and through the roof, right now! Thanks for your great videos and awesome product!

[@andyhillstrand4855]

Thanks for the video. The hog ring tutorial was key for me to change out the bottom cushion on my 2012 tundra. I would not have figured it out so fast without your video. Huge thanks for doing it!

[@ernestoalonso945]

Thanks for your video, you help me a lot on my replacement bottom foam piece on my 2010 Toyota Sequoia driver seat.

[@dwightbird2988]

Wow, this is a lot more complicated with the seat heater. You can't really disconnect the heater from the car, so the seat basically has to stay in the car. Everything on the seat belt side is hard, and you need something like those little plastic clothing tag fasteners to connect the seat heater to the seat cover in about 20 points before you start connecting the hot rings. I should add, this product is fantastic. I'm so glad they decided to make seats for this vehicle.

[@ninocalderon2372]

I JUST DID MY A BIT ,ORE TIME AND PATIENCE FOR SURE . MAKE SURE YOU DONT HAVE BIG FINGERNAILS

[@daveryan761]

Amazing products!!! The Seat Shop is legit.

[@tedwallace161]

Do you have covers for the 1st generation sequoias 2001-2007?

[@owenabercrombie9472]

Great how to video. I just ordered a passenger side bottom. Hopefully the install goes well.

[@TheSeatShop]

Great, if you have any questions during the instlal feel free to reach out to us, we're got you covered!

[@Cbfgnjhc]

I have to do the same thing to my tundra's driver seat is trash but I think I also need to do the foam underneath I got to get a hold of this mother

[@pauleyedwin6056]

21:38 couldn’t see role under but heard snap. Maybe be clear when taking apart. Otherwise great video.

[@famwamdad]

Great video! Does disconnecting the air bag sensor mean that you have to recharge it when you reinstall? Or is it simply a disconnect and reconnect the plug?

[@tbamagic]

On my 2008 Sequoia Limited, the leather driver's seat lower cushion cover is in good condition- but the vinyl side panel on the outboard side of the seat is starting to crack. I've noticed that most all Sequoias that I've seen take a hit in that area, because its a tall vehicle and you have to slide out and that really crushes that seat side down during that process. Same on the cloth seats. Seems that I have to replace the entire lower cushion cover since I may as well at that point.....

[@maltzchallenge220]

Since the Tundra only has seat heaters on the bottom cushion and I got use to a lumbar heater in my Suburban. What are your thoughts of removing the heater from the bottom and placing it in the back for a lumbar heater

[@revopqrs1]

did you stop including hog rings? my seat bottom just showed up, but i have no hog rings? how hard is the seat heater going to make this?

[@travisfeld97]

2017 tundra platinum. The foam seems ok but my butt goes numb after about 2 hours. Does it need to be replaced or is it just the leather that dried out and got hard?

[@tbamagic]

Really excellent

[@itninja9503]

Comparing this option to katskin, the price to replace 2 seat bottoms is half their price to replace the entire truck. What makes your product worth the cost? I would prefer to just replace the bottoms but am torn between the 2 options as I am concerned how your seats will match my 10 year old seats.

[@douggrote977]

I bought the bottom seat cover , it just showed up to today, everything looks strait foward, people are mentioning seat heater? I have that, so that's an unknown, the other question is the hog ring plyers , obviously must people don't have a set in their tool box, so should I go buy a PR, or can I improvise with something else???. Help before I tear it apart and can't finish the job

[@Akuma_Raou]

The tool you place the metal clip into is calle what?

[@ericc1214]

Which holds up better? Vinyl or leather? My 07 Tundra all-leather didn't hold up at all - and the seat bottom is torn. When I recently visited the dealer, they said the newer Tundras don't use real leather since it doesn't hold up as well.

[@TheSeatShop]

Hey Eric, thanks for reaching out, so there are pros and cons for both materials options so it is up to each person. The leather is going to be tougher and a little more flexible but does not stretch as much as vinyl, on the other hand, vinyl can stretch but cracks easier since it is not as flexible. But if you just added new covers and they are not holding up then it sounds like your foam cushion might be the problem since either material should hold up for quite some time. We would need to see some pictures of your seats and of your VIN# to better help you out. You can send them to [e-mail]

[@ericc1214]

Thanks for the quick reply. Email with VIN and picture sent.

[@Jeff-dd2pt]

Audio is out of sync about half way through the video

[@itninja9503]

EXTREMELY disappointing that nowhere in your install guides do you talk about how to attach the Factory Heated seats.

[@Cbfgnjhc]

Can I buy product directly from the seat shop

[@SirDanny088]

Could you remove the control panel without completely removing the seat? And taking it out of the vehicle ?

[@AggiePhil]

Where's the video of the seat back cover removal?? That's what I need.

[@TheSeatShop]

Unfortunately since we don't make the top cover for the Tundra/Sequoia's, we have not made a video for it. However, we will release the top covers down the line and then make the video, thanks for your understanding.

[@rolandoalburo5519]

How much is your leather seat set for toyota tundra 2008 crewcab SR5 5.7 engine TAN color

[@TheSeatShop]

Hello. We don't manufacture for the SR5 at this time.

[@k.sather4833]

Where is the heater pad located? Is that attached to the foam or leather?

[@TheSeatShop]

Typically, it's attached to the foam itself.

[@k.sather4833]

@@TheSeatShop Oh fantastic! This will make that aspect much easier. Thank you for replying and the help.

[@Cbfgnjhc]

I have a pair of hog rings I was married before

[@golfdrtool947]

Lexus ES350??

[@TheSeatShop]

Currently we will only have the 2003-2009 Lexus options for the GX and the RX but wanting to have more options in the future. Here is a link to let us know what you would like for us to work on next. - www.theseatshop.com/service/product-request/

[@kosanders78]

Need 2003 Sequoia!!! Not available to order!!

[@TheSeatShop]

Hi Kent and thanks for reaching out, we understand the frustration when you do not find what you need but unfortunately being able to manufacture every Year/Make/Model is something we cannot do at this time. Our R&D process is very tedious and when we do complete it our covers will be made correctly since R&D can take some time to complete and we don't like leaving you without an option, you can try using our Nationwide Upholstery shop network to see if the nearest shops to you can try and help you out. - www.theseatshop.com/resources/install-locator/

[@Cbfgnjhc]

Nobody's commented since I commented 2 months ago that's very weird