Tractor fuel pump problem fixed with a 5¢ o-ring.. David Brown 990

[@dimiturml]

Not only Marty makes good, interesting and informational videos, he is a fan of the Caterpillar safety film Shake hands with danger. I love these videos, no useless talking, no specialized branded tools that cost thousands, no fancy intro videos. Just a smart man with skill, knowledge and perseverance working on machines that he actually use in his daily work.

[@gunthermayer4193]

I love this films!

[@pnwRC.]

Is there more than one? I have seen one where this "Shake Hands With Danger" song was used.

[@marcelOberauer]

Ahh yes it was that Cat film, I saw it after watching Marty's abandoned excavator video some months ago, and I was just thinking were did I heard that before :P

[@gunthermayer4193]

@@pnwRC. kzbin.info/www/bejne/eXinmmiIdrWLras but it doesn't play the "Shake hands With Danger" i guess

[@Brad.whatthe]

Just a quick battery power to solenoid check ✅ yep that’s fine

[@reviewaccount469]

I see you are a fan of VGG... We should get Marty and Derek together for an episode!

[@Mikey__Mike]

😂😂😂

[@wyattstan]

When I worked at a gravel pit back in 1988, they showed us that video “ shake hands with danger”. I laughed when I heard it in your video. I still go around singing “shake hands with danger”. ….lol

[@Jerram89]

That shake hands with danger bit was probably one of the top moments of all of my KZbin watching this year. Excellent crossover.

[@guycarignan2263]

Your videos are very interesting. The way you analyze ant then pin point the problem is very educational. Can't get enough of that. But the ThreeFingersJo song, before the almost dramatic situation, was just hilarious. Good sense of humor. Thank you for those videos.

[@markrandall1456]

To call it a junker Wouldn’t be fair. It’s just an o ring Sucking some air. Good old Marty He knows all the tricks. Please come to Texas. I’ve got plenty to fix. Great job. Thanks for the fun. 🤠

[@MartyT]

Haha I love your work Mark.. I'm thinking about writing some kids books about Angry Ram (my other channel kzbin.info/www/bejne/jpyUl4iwoNaqmLM ) I wonder if you would be interested in helping rhyme the story? Message me if you're interested [e-mail] Happy to pay for your services

[@Samuel-nu3uz]

Hahaha that’s brilliant

[@ColinRichardson]

Encore!

[@JackBWatkins]

While in the Lone Star, swing by in your car, my place wont be far, Cause I’m in Texas too. I’ll buy you a beer, feed you some steer, and make some good cheer, then I’ll show you my list to do

[@timeflysintheshop]

If this book comes together, make sure you let us know when we can order one.

[@dudekiwi]

From memory those pumps don't normally have o rings there. That much crap in the out let line ....bet that pump is full of crap ! Thanks Marty T enjoy your clips heaps

[@sparkplug94]

I shook hands with danger, now they call me one ball Paul.

[@604116]

I shook hands with danger. Now they call me "dad"

[@briansilver3412]

I shook hands with danger, now they call me "Lefty"

[@hitskip7750]

Nice job. One of my favorite channels..

[@larrywerring9674]

I love seeing these old beasts come to life and return to health.

[@andysaunders3708]

The infamous 3-fingered Joe safety video. I'm gonna have to watch that AGAIN this Thursday when I do my 3-yearly OSH Forklift Cert. GRRR. Good to know that 5c well spent can result in a worthwhile outcome...

[@claybarden5092]

We NEED more.

[@Chr.U.Cas1622]

👍👌👏 Definitely! 😁

[@Ham_rig97]

This channel has crazy potential.

[@AIAllar]

I can just imagine the frustration of the last owner seeing these vids and what easy fixes they turned out to be hahaha. Good job mate ! You're an inspiration for people fixin rather then buyin new!

[@endutubecensorship]

I was just thinking that

[@TylersNeighborhoodGarage]

They won't be frustrated. If they cared about fixing it they would have. They wanted the $500 for as long as that lasts and an excuse to buy a new tractor.

[@adamvowless6436]

Ahahahaha!! I just spat my beer out laughing when shake hands with danger stated playing!! 😂😂🤣 Very good taste 👌

[@warrenmichael918]

I started to smile when it started playing as well because i knew something was coming, just didnt know exactly WHAT was coming...

[@bMAX4u]

Three finger Joe! Janky Threads. I Love you! Didn't fix my particular problem but at 4:20 in the morning looking for a "no fuel" problem on my friends tractor I can assure you the Joy those moments brought me was worth EVERYTHING! Thanks mate! Keep on keepin' on!

[@ZenWithKen]

I love how you pull the copper fitting out and show it to the camera with no shits given to the fuel leaking out of the bowl.

[@NocturnalProductions]

Love your videos Marty. Mrs and I will be heading back home soon to the sounds.. Would be great to bump into you

[@giovannipg3000]

Nice done...greetz from belgium db 880 selectamatic 🙂

[@opelmecrazy4398]

Marty- Videos keep getting better and better! Adult language makes them feel like home. You had me laughing

[@disturbedcarrot]

3 finger Joe! Great job! Can't beat a brown, if only 995/996s were still for sale. Reliable and ran on fresh air.

[@PaulBarwick]

I was even more impressed when I figured out that $500 NZ that you paid for that David Brown 990 is only $325 US! I really like what you do, Marty. I can't count the number of people I have told about your washing machine motor generator. Your knowledge, ability and skill is amazing and inspiring.

[@bokkenrijder172]

Sounds like a Happy Tracky in the end. 😂

[@RobertMOdell]

Marty T. I'm so glad you didn't torch your new tractor. It was a good find !

[@lynneperg6853]

Love the sound of an old diesel tractor running. You are a wizard with old machines Marty.

[@michaelfisher9671]

Marty your video title killed the suspense! Ya gotta build the tension and keep us hanging on the edge of our seats.

[@MisterClaws]

I love how you bring the old girls back to health.

[@astonmartin2727]

Marty the fixer guy does it again. Well spotted and fixed. Give us more videos please.

[@TheMotorick]

I see a lot of people commenting about how much they appreciate your down to earth and low key style in addition to your seeming ability to fix anything. I'll add my voice to theirs. I don't know how long you will be making videos but I don't want to miss a single one. Wish I could buy you a beer. Cheers from Lawrenceville Georgia USA.

[@CoiaItaly]

Sweet Tuis in the background.

[@brianmoore5498]

nice straightforward repair. a joy to watch. thank you

[@JHruby]

You really had me with that shake hands with danger. What the... SPARK. Brilliant!

[@Shane-Singleton]

I love old diesel equipment. Good little fix. The importance of a nice sight-glass. Can't wait to see more videos on this thing even if it's just basic service stuff.

[@chuckhaynes6458]

You're a man after my own heart All of my life I've only been able to afford worn out equipment that was dirt cheap. From back-hoes to dozers to the Autocar Diesel truck and low bed trailer I hauled them with. I always kept my stuff as clean as possible and tried to keep on top of repairs. I enjoy your videos and your tenacity. Beautiful country you have there. Stay safe.

[@kiwibryntoo]

That is one excellent score!. No majors and all oopsies are easy fixes...

[@ericcullen1597]

Have a couple of of old tractors. Admire your work. What takes you 10 minutes takes me 10 years. Very cluey. Thanks Marty, for your videos. I learn allot from them.

[@tvs3497]

Good job, Sparky, I bet you could fix the hydraulics on my 880.

[@zorthomis6497]

I watched the shake hands with danger video in HD mechanic school… I hear the guitar riff sometimes at work

[@426john]

Great video , i did laugh when you shorted the starter motor positive against the fuel bowl , a little bit of wee came out !

[@stevemiller6766]

I don’t understand why the glass bowl is up not down. I have seen them pointed down to catch water and heavy bits of crud. Good video sir, count yourself blessed to live where you do.

[@spikedominikovichspikearoo1900]

Bloody good vids mate Kiwi been living in Scotland for 20 years and i wonder why seeing your way makes me home sick big time cheers Mate wheres your land cheers Spike

[@spikedominikovichspikearoo1900]

funny i have a wood splitter north star ,same as yours how does your ramp work cheers and thanks Spike

[@spikedominikovichspikearoo1900]

no have worked it out great idea cheers

[@teenaramsay2469]

Marty and family live at the top of the South Island, Marlborough Sounds. Hope you and yours are surviving what nature is sending your way...let alone Covid.

[@WilliamCHyland]

Love watching the repairs.

[@jasonsutton4719]

It's pretty amazing what anyone can fix with improvising or getting new parts. Good job Marty.

[@BensWorkshop]

So sold for parts for want of an O ring. Good find.

[@powerman1955]

Once again, the amazing Marty T....... Quality entertainment at it's best! Thanks Marty

[@jefflary5457]

Marty that sediment bowl is mounted upside down I believe. You look at a few you will see what I mean I think. Love you videos keep em coming Jeff in Maine

[@99unclebob]

great video Marty was usual , don't you just love those simple fixes and thankful you got an o-ring kit on hand

[@chrissscottt]

Nice work Marty. I'm amazed at how well a 50 year old tractor runs with some tlc.

[@davidk6271]

The best repairs are the cheap ones. Good work.

[@loz11968]

Great job the power of visual inspection

[@mathew7521]

Loving these daily videos this week!

[@AtheistAnarchoCommie]

I did not expect the Shake hands with danger theme. Very nice!

[@markhensley9378]

Another good video. You've got got the old David Brown running pretty good 👍. Well worth the price!

[@Mylifelovingit]

Marty is the man!!! Another great fix

[@chriswills9530]

If only all of life was like a diesel fuel system. Nice work Marty.

[@BRAVOACTUAL]

Dude I swear, you are starting to become our dealer. These small videos are like crack!

[@BRAVOACTUAL]

Also, that damned guitar is stuck in my head again now. Thanks...

[@slimJimmey]

@@BRAVOACTUAL lol me too a while back it got stuck in my head for so long to the point where I just learned to play it just to make it stop! Now I'm back to square one!

[@fclentuber]

Man that tractor sure is lucky it found you!

[@dylantrinder1571]

Had a good old belly laugh when I saw that spanner "arcing and sparking". Have so many memories of similar situations....and I always used to promise to myself that I'd disconnect the battery......next time! 🤣🤣🤣

[@halfwayfarmsandoutdoors3550]

Love your repairing videos!! I work with older equipment on my farm and I get a lot of inspiration to keep them repaired and keep using them!!!

[@conundrumconundrum5589]

Love the music insert. lol Danger never takes a day off.

[@fava7753]

Perseverance is the key . Top man Marty .

[@ruaraidhmcdonald-walker9524]

Ticking the problems off one at a time! Looking good. Enjoying the more frequent videos too!

[@carlosmontoya8658]

Enjoy watching your vids here in Virginia, USA!!! Keep up the good work!

[@bartrabiej]

Feels so good when fix is cheap and easy.. 👌🏼👍🏼

[@surveywaters]

Enjoying this series. Thank you

[@headonz]

No intro No F....... music !!! Wonderful.

[@tony66au]

With some of the cars I buy cheap I find 80% of my time is spent undoing other peoples fixes and yup making with the sparky spark sometimes too and I laughed my arse off at the remark and the Audio dub so Cheers Marty! Better than a triple shot Espresso to get the heart going and the senses tingling!

[@dumdidumdumification]

That spark was an sphincter tightening experience

[@TheFrankBarrett]

First time, long time. You dropped the Shake Hands With Danger safety vid audio, one of the funniest safety vids ever! Love it, cheers!

[@mischef18]

Think you got yourself a good tractor bro. Cheers for explaining everything so well in each of your videos.

[@MRrwmac]

Good troubleshooting. Glad it was a simple fix.

[@avrel820]

Good thing you managed to stop the air getting in

[@MrGeroth]

You the man Marty.

[@citadelik]

My Chinese tractor (diesel) had a dodgy metal fuel tank that was rusty. I took it off, cleaned it up and coated in the interior with a fuel tank sealer paint. That's been 5 years ago and I've never had a fuel problem since. Well worth checking the interior of your tank for rust spots! The paint is more like an epoxy, I screwed in plugs where all the outlets were before filling the tank with it and swirling it around. Where you can touch it in the filler pipe its like a hard plastic.

[@growingknowledge]

Love your videos mate. Thanks for sharing.

[@MontyRoyal963]

Oh, thank God that didn't ignite... great uploads. Stay safe like usual, amigo!

[@Jdigger4130]

I really enjoy you’re lifestyle n great vids on making things work! I’dream of living remotely n building up an antique earthmoving outfit so you give me lots to enjoy! Hope you get a bigger dozer.n here in the states we call it a 10 wheeler n tilt deck n yer the local road man!!! Great stuff

[@margaretwilkinson9140]

thank you for posting more often Mr T!

[@TedBishop1]

Thank Marty Good Morning from Maine Usa cant sleep this morning

[@rubenbraekman4515]

That's what I love about old iron... easy to fix and no bullshitting with useless stuff

[@MightbeAmechanic]

I love the shake hands with danger bit was made to watch that kind of stuff in high school engineering class

[@iTzHobson]

Proper job marty!

[@truckertom3323]

Nice sound coming from that Engine, you got a result with this Marty.

[@martincorbitt1979]

It could use a good washing!!!! Martin in South Ga

[@matthewjackson9092]

That was a cool video another great job Marty good on you

[@moseham]

always love the way the old diesels start,I have a 135 massey 3cyl perkins just got it going after doing the head gasket good project not hard but still made you think

[@jamesrivis620]

We should have a new term, 'To 'MARTY' it' for investgating mechanical issues !!! The term describes the investigative process of observation of and eliminating of every possible cause of a problem. Just look at how he demonstrates NUMEROUS sites of faulty operation. INCREDIBLE. He makes prior mechanics seem lazy.

[@zarb88]

Liked the before and after pictures.

[@Dave-ty2qp]

I believe most people just get tired of a machine and sell them rather than doing the repair. If you don't repair them yourself it can get expensive. The key is to not get overwhelmed with a problem. Think it out, Identify the problem and go step by step to the final conclusion such as Marty does.

[@leslieaustin151]

I laughed at the short-circuit bit. I still have a 7/16 - 1/2” ring spanner I dropped across the starter terminals on a 24V lorry, and there are massive scars on it for that 50 yr old mistake! Nice work mate. Les in UK

[@TrevorDennis100]

The only problem being that 'Shake Hands With Danger' is one of those persistent tunes that every time you hear it, you are stuck with it in your head for hours.

[@leslieaustin151]

Trevor Dennis Agreed, it’s there and I’m (trying to) whistle it! Les

[@_Skim_Beeble]

Nice work fixing the old girl. Those rubber o-rings can be a pain in the ass to get. I bought a box of 419 various sizes from eBay for $20 because you never know when you'll need them.

[@steamfan7147]

I've got one of those, it has the four most common sizes in it too- Too big Too little Too thin Too thick, sigh, such is life.

[@Mr.M1STER]

2:14 That reminds me a little bit of the time I was tightening up a battery connection and I accidentally but stupidly shorted the battery terminals with the spanner. There was a big spark and it chipped a chunk off my spanner but I was fine. More of a surprise and a lesson learned than anything.

[@Aaron_A_Lynch]

Nicely done sir...quick fix good to go

[@TheKandyGuy]

I like the part of the song you pick on your video just before the electrical short you had...haha!! be safe and see you on the next one..

[@renerobes30]

Making do with what's at hand. Excellent!

[@hpelisr]

Looking good Marty.

[@eldonmiller955]

I really like that upside-down style sediment bowl! Seems like something you'd see in a mad-scientists lab.

[@Mankan569]

Marty continue to post videos as you repair your DB 990 I save these. Why? Because I have a DB 990 Selectamatic from 1971. Do not get me wrong but hopefully 😙 So maybe you need to repair the brakes so I'll see how to fix mine as only one works😉 Greetings from Sweden

[@JBFromOZ]

Love it when a plan comes together

[@oldenslo4141]

Short and sweet! I like it (the video).

[@Chr.U.Cas1622]

Dear Marty T. 👍👌👏 Well done again and as always. Please kindly allow me a suggestion: Simply try to use common teflon sealing tape on the thread. Thanks a lot for making teaching recording editing uploading and sharing. Best regards, luck and health.

[@Chr.U.Cas1622]

Dear @@bottomlands I know! But great Marty T. mentioned that the threadnut/union nut is not going correctly respectively straight in. As a temporary fix it could help. Maybe it would even last a long time (as temporary fixes often do). 😁 Best regards luck and health.

[@Chr.U.Cas1622]

@@bottomlands Good grief, maaan! Try to think instead of writing "lol"! Additionally (and for your own sake): Try not to be arrogant in public! Do you really think your behaviour is worth an explanation respectively any further writing? I tell you what I will do instead of wasting my time with a possible troll: If great Marty T. doesn't know what I mean and therefore wants an explanation he will receive one! I wish you luck, health, decency and wisdom.

[@Chr.U.Cas1622]

@@bottomlands Oh WOW! Now look at that! ksfraz thinks he is allmighty! He really thinks and writes in public that he knows what Marty T. knows/thinks? He can't even stand that I think that I call Marty T. great because of all his skills, work and videos he has done. ksfraz is, amongst other things, obviously jealous. He also thinks to know what my thoughts are! ksfraz shows a very interesting personality and behaviour. With that he proves in public (again!) that he is simply nothing else than a typical internet troll trying to offend and provocate.

[@pumkinvine4175]

@@Chr.U.Cas1622 Nice arrogant rant calling someone arrogant, what a douche bag! abtw, you're wrong about the tape.

[@Chr.U.Cas1622]

@@pumkinvine4175 Good heavens! Simply read the comments again and please try to understandl this time. Or are you just another troll? I already have to think so because you wrote in public that I'm wrong before you even know my thoughts/ideas! This is nothing else than provocative and offending behaviour.