Tim, I think you did a great job administering a fair a subjective test. You were consistent between the two tests which is the most important thing as you eluded to. I've worked as a professional engineer for more years than I care to say and I always appreciate your well thought out methodical approach to all of your comparisons and tests. You obviously know what you are doing. I have learned so much from you and Christy! Thank you for everything you do. Thanks Terry Smith
@TractorTimewithTim4 жыл бұрын
Thanks very much Terry.
@salmonhunter74144 жыл бұрын
So glad that you are feeling better. Stay safe and warm.
@Kcolby474 жыл бұрын
Nice job Tim. It certainly looked like a practical comparison to me. I had never thought about any capacity difference on the non MSL vs. the MSL. I would just appreciate the self leveling feature itself, all things being similar. Glad to hear that you are feeling better and getting along well with the stint. Í´m sure Christy will keep an eye on you. Blessings to you both!
@mgeren4 жыл бұрын
Do you have any way of measuring curl force? A load cell perhaps? I’d be interested in seeing if there’s any additional leverage provided by the leveling arms.
@rash04014 жыл бұрын
Tim, have to admit you ALWAYS do a fantastic job with your videos! well spoken as well as thought out. keep up the great work!
@timraber65754 жыл бұрын
I would not be surprised if the lift specs are just calculations done by engineers, not real world test. When they are done, measurements are done in a lab environment under perfect conditions. I have looked at fork truck lift capacities in the past. Confusing.....In the real world, employees are expected to get the job done with the equipment provided. The engineer that put out the specs is not there to help adjust positioning each time you pick a load up. The specs are important not only to protect the machine, but the operator from getting hurt. My operation of said machines was to get a feel for when I would not feel comfortable in the seat. Course that would vary on skill level too. Mainly the ones arguing over these numbers are just looking at the color of the tractor. Keep up the good work. I enjoy seeing the tractors out working much more than trying to make sense of these numbers. I know they are important. I am just a novice on the small tractors. Take it easy Tim, I want to shake your hand again one day.........
@TractorTimewithTim4 жыл бұрын
Interesting view. I think the specs SHOULD be valuable to prospective buyers to help choose the model they need.
@johnmedlin58944 жыл бұрын
Excellent job Tim and Christy. So glad that you're feeling much better Tim.
@ShaneZettelmier4 жыл бұрын
That automatic load leveler is gonna be awesome when you’re running the pallet forks I’m trying to put stuff on and off of shelves.
@jesseheller26884 жыл бұрын
Hey Tim question about the 1025r. Mine doesn't cut lawn the greatest. I take the deck off and on quite bite. 54in deck any thoughts
@thomasyerbey3374 жыл бұрын
Hey Tim 🚜 great log glad to see that you're feeling better and able to do things that you want to do love your videos watch you everyday 🇺🇲💯
@frankhartmeyer98414 жыл бұрын
Great test good information thanks Tim. I'm glad to hear that you are feeling better praise God.
@dougthegrouch4 жыл бұрын
The way you did your test is more real world. If i was going to buy a new tractor, id more than likely would get the MSL loader, especially with a set of forks. To upgrade, myself, can't justify the money for my use. The info was great and i think you nailed it. Glad youre feeling better, just don't overdo it. Keep selling tractors.
@jammin60psd4 жыл бұрын
Does hydraulic oil temperature come in to play at all? You can also use a digital magnetic level to insure the bucket is "level" at each of the measurement points.
@davidhosmer14244 жыл бұрын
Hi Christy, Glad you and/or Katriel no longer have to ride the bucket for Tim's tests. Always great videography. Tim, good you are feeling better. Now - get to work so Christy doesn't have to carry you. Thanks and take care all.
@DrDGr24 жыл бұрын
Thanks Tim for your nice videos ( 23s owner here )
@brandoncrimmins62964 жыл бұрын
I’m glad to see you’re doing well! Easy with the weights though... I blew a couple stitches out of my eye about 3 years ago by over doing it... Excellent video! I love these real world comparisons you do. I think they’re a far better way for people to see what 500lbs actually means as opposed to reviewing a spec sheet with a dealer. If you could find time... I’d love for you to do a comparison of pulling pallets off a trailer with both loaders since that is really one of the primary reasons one would get a self leveling loader.
@FloridaDeere4 жыл бұрын
Tim, you're intro graphics with the tractor loading the a into Tractor Time with Tim is going to have to feature a new loader with MSL. Tim, it looked like a good test to me. I wonder where JD is getting those increased figures for the MSL? I still think it's a cool feature, but not willing to get a new loader just yet.
@neilcombs79704 жыл бұрын
Try having the bucket start at full curl and keep it at full curl measure to the bottom of the pin. That should make test easier and repeat better. Pick a fix point front and rear furthest point out that’s just to get and ideas of tire deflection or rear lift. Good to hear you are feeling better!
@TractorTimewithTim4 жыл бұрын
Ok. May try it...I suspect the NSL wins in a weight slide :-)
@neilcombs79704 жыл бұрын
Tractor Time with Tim I don’t expect much difference on the lift, but you could find a difference in the curl due to the linkage leverage.
@ericstyer28904 жыл бұрын
Take care you two. My Grandpap recently passed at age 84 but moving weights on and off is what first put him in the hospital. Offer some fans to come help move weights for an episode so y’all can rest. Take care God Bless.
@TractorTimewithTim4 жыл бұрын
The doc wants me working. He said there is NO WAY that I can dislodge the stent. ...and 84 is a bit different than 54
@rgd25984 жыл бұрын
Tractor Time with Tim my uncle died from a dislodged stent when picking up a bag a dog food within a couple of weeks of the procedure . But that was back when this procedure was in its infancy. I had triple bypass two years ago. I went to work too soon. The area around my scar is herniated and looks like I have a golf ball under the skin in the center of my chest. Doctor said not worry unless it starts to hurt
@mymorristribe4 жыл бұрын
Super cool demonstration. This is why I love your channel.
@TractorTimewithTim4 жыл бұрын
Thanks!
@hughhead90794 жыл бұрын
Tip of the hat to TTWT for the "real story" on the MSL's performance and the graphs before and after hydraulics were adjusted to "standard". That took a lot of time to put a short segment together that had a lot of detail behind the scenes. Keep well Tim!
@TractorTimewithTim4 жыл бұрын
Thanks for the kind words, Hugh!
@tomdisanti4 жыл бұрын
Second the Neil Messick load cell comment. Also, would it make sense to use a magnetic level to make sure both were dead on level rather than worrying about floor? That aside - with these results, not sure I'd run out and switch loaders for no apparent practical benefit. Any comment from Deere?
@GrampysTractor4 жыл бұрын
Another great test run. So much information but I don't see that much weight difference to be a determining factor of which one to buy. The MSL is clearly the winner just in the self leveling ability. Do you happen to know the weight difference between the 2 loaders not counting a bucket? Need any more help Time give me a call. Were so glad your continued health improvement.
@codyshortt44694 жыл бұрын
Tim, Love your work! Keep it up! Listen to your doctors and please avoid the cheeseburgers! (we need these videos to keep coming!) There is a point that has been missed or briefly touched upon on all 120R MSL video reviews (by yourself and others) and that is the 4-bar linkage where the bucket attaches to the loader. I've noticed that the larger tractors and corresponding loaders have this linkage, yet the 120R does not, or did not before the MSL. The curl cylinder on the standard 120R attaches directly to the link that moves the bucket. On the 120R MSL, there is a 4-bar linkage between the tilt cylinder and bucket, and that is where the curl cylinder attaches. I'm a Mechanical Engineer but new to tractors and this has really had me questioning this linkage on larger tractors and backhoes, and why it was left off of the 120R (non MSL) (note: your 3 series JD has this 4 bar bucket linkage). What this can accomplish is a larger angular travel out of your bucket tilt with the same cylinder travel. What you have proven is that John Deere testing (or probably marketing) has probably been sandbagging on the numbers to sell this MSL or added the linkage to get another selling point. My theory is that you can rock the bucket back further, get the weight closer to the "pin" and get higher lift capacity. If you re-do this test, can you please put a digital angle finder on the bucket of each setup to measure angular curl of each setup and also re-do the weight capacity lift test at full curl? Your "500mm" measurement eliminates the linkage from the equation and just proves the lift cylinders are the same. Thanks, Cody Mechanical Engineer with an affinity of Kinematics and now 1 series John Deere P.S. My "finance department" thinks another color could have saved us money, but told her that Tim has proven that the green is a superior machine!
@trvickers1114 жыл бұрын
Hi Tim, I had the same stent put in that you did. The meds I was put on held my pulse rate to low. I would start doing some work and have to sit down and let my heart rate catch up. Pay attention to your rate as a change in meds might make a huge difference in your endurance. My pulse was low 50s at rest. Thanks and wishing you the best
@kevinjansen27384 жыл бұрын
I think your test was great. I don’t think at the pin measurements matter. Your test is much more real world. Who cares about specs I just need to know which one is gonna get the job done better. I was ready to try and trade mine in but not ready to give away 2 or 3 inches of left height. It already suffers in that area
@gregnewlin10744 жыл бұрын
I stand corrected! I see nothing wrong with the testing. Same weights, same positioning in the bucket, closer to real world scenarios as you can get. Mind you just my opinion. Great job and thanks for clearing that up. Not what I expected! Continue to get yourself well. Prayers to you and your family.
@TractorTimewithTim4 жыл бұрын
We were stunned!
@akmccutcheon1534 жыл бұрын
Just ordered a stump grinder using your code from GD... thanks for the extensive reviews can't wait to get it.
@TractorTimewithTim4 жыл бұрын
You’ll love it! Thanks!
@akmccutcheon1534 жыл бұрын
@@TractorTimewithTim got it Friday after a trip to JD to get some quick hitch bushings, then cutting the pto driveshaft I was up and running. Knocked out 7 saturday and 3 sunday (all solid fat lighter) only about 70 more to go. So far I love it, takes about 20-30min per stump well worth the money so far.
@JAllyFarms3 жыл бұрын
In your opinion would you get the self leveling or the none self leveling loader? for normal home/farming use w/out needing forks or only using them once or twice a year?
@TractorTimewithTim3 жыл бұрын
Non self leveling for 1025r, MSL for 2032r/2038r.
@JAllyFarms3 жыл бұрын
@@TractorTimewithTim thanks
@Confederatemule2 жыл бұрын
Thanks for this video. I am lookin hard for a new tractor with loader. This has been helpful. Now for the heart problem. What did the DR. do to help your heart. My Bride and I both have heart problems.
@TractorTimewithTim2 жыл бұрын
Stent
@jimmywalker92454 жыл бұрын
Well i dont feel like i am missing out now. Test looked fine to me. Lifting the loader thats bolted to a load cell on the ground could be cool to try though.
@alexdotluna4 жыл бұрын
I support this, try repeating this test with a load cell chained to the ground. That should yield different values (higher ones).
@FishFind30004 жыл бұрын
Would be easier for repeatable test and less worry about I hurt from the weights. Also can test pulling power and 3 point lift
@TractorTimewithTim4 жыл бұрын
But has to be well underground to be able to have room for load center and still test lift at ground level. In my opinion, lift at ground level is more interesting than lift at full height.
@CWCaesar4 жыл бұрын
Thanks Tim! At least I know I won’t lose any capability by going with the MSL! Praying for your continued health improvement.
@alienation-k1x4 жыл бұрын
You're losing 2 to 3 inches of lift height capability.
@scottykify4 жыл бұрын
Thanks for the video Tim, did you have problems with the MSL cast bucket mount being slightly too wide to fit the 49" bucket at all? I think your test was just fine for a real world comparison. Of course there are ways you could be more accurate with exact CG of the weight in the bucket but given how these machines will be used its clear the operator will not notice a increase in lifting capacity.
@TractorTimewithTim4 жыл бұрын
No issues with the JDQA. I think folks misunderstood my statement in the first video. The connector to the. Bucket is identical...but the back side of the bracket is larger.
@scottykify4 жыл бұрын
@@TractorTimewithTim Correct, thats what I assumed you meant in the first video. I just heard my dealer was having to grind some material off of the cast bracket to fit the 49" loader.
@TractorTimewithTim4 жыл бұрын
I have a 49”. I will try it if I get a chance.
@scottykify4 жыл бұрын
@@TractorTimewithTim Maybe I missed it, but what bucket are you using in the video?
@TractorTimewithTim4 жыл бұрын
Discussed near the end. 53”
@steventhomson20424 жыл бұрын
Very interesting. I like the real world application-test. Great job!!!!
@prenticefincannon92394 жыл бұрын
Glad you're back at it! The test that personally gave me the most comparative information was when you tested deere vs kubota using pallet forks loading a pallet onto your trailer. Maybe this time load 100 lbs plates at each corner then the rest in middle of the pallet. After capacity for flatbed is reached I'd be curious how much weight to get over your dump trailer half wall as well. This type of test also lets you curl a little but not completely so weights don't come flying back at you. I think it helps with more realistic conditions, accepting a little curl may be possible.
@TractorTimewithTim4 жыл бұрын
Hard to be objective because distance from loader pin to weight is CRITICALLY important in that test.
@prenticefincannon92394 жыл бұрын
@@TractorTimewithTim totally agree and understand. Guess I'm looking at the test as more realworld of a pallet loaded with left over pellets at the end winter season or something' that most of us are too lazy to back load the pallet to help the loader. If I bought a loader with a closer pin I wouldn't be trying to make the load further out to be fair to a loader I don't have (not snark, just explaining, I promise! haha.) Guess it's more of an cosmic crisp (apples) to red delicious (apples) comparison that I think would be helpful to see rather than making it as fair as possible. Regardless, your content is awesome and appreciate all the effort you put into them! Excited to see your new building full of all your toys.
@lloydcrowder12834 жыл бұрын
Glad you are feeling better.
@NathanFontaine14 жыл бұрын
How do you adjust the hydraulic pressure?
@wickedcoyote2714 жыл бұрын
I’m curious how the curl and dump angles compare. Does the msl have less range of motion?
@TractorTimewithTim4 жыл бұрын
Friday
@DavidJones-rv3ou4 жыл бұрын
Put a magnetic level on the side of the bucket to verify level state.
@alittleofthisandalittleofthat4 жыл бұрын
I was thinking of hydraulic fluid temp? Was the testing done one loader followed my the next. Or was the tractor ran previous to warm up the fluid before the first test. Maybe temps wouldn’t make that much difference.
@alexdotluna4 жыл бұрын
No, it should not make a big difference. Force is equal to Pressure*Area, so as long as you are reaching the pressure, the Force would be ok.
@jasbeirne4 жыл бұрын
Probably a stupid question, but how did you adjust the hydraulic pressure from 1800 PSI to 2000 PSI?
@justadbeer4 жыл бұрын
Good job, glad you're feeling better (don't over do it)
@stevek44494 жыл бұрын
Niel on the orange team with Messick’s used a home made flat tv monitor mounted to the SSQA loader and pulled on a load cell. Other than a flat mounting surface- flat rack I think it’s as accurate as you could get with the bucket weight thrown in. So do factories add or subtract bucket weight in lift test?
@mcd50824 жыл бұрын
Good info Tim! Glad you’re doing well!
@jamesmiller21484 жыл бұрын
Already pre- orders the isotunes earmuffs. I wonder if the tests would be different on pallet forks than on the bucket. Just something to think about
@mikegraziano15624 жыл бұрын
My guess the forks will lift more as they weigh less than the bucket(s)
@TractorTimewithTim4 жыл бұрын
I don’t think the forks weigh less than the buckets...even the super lightweight ones like the artillian.
@Jasonrcsd4 жыл бұрын
hey Tim just want to say your looking good!! Interesting results!! Thanks for another quality video!!
@rodneytsteele3 жыл бұрын
Did you contact JD as to why your lift capacity was different then their stated capacity for the MSL? I would love to get about 200 lb more lift capacity out of my 1025r. If I knew going to light weight forks and MSL would get me there I would be one happy camper.
@eosjoe5654 жыл бұрын
Nice test Tim. I was really hoping to see a test using pallet forks as I've never really had issues lifting anything with my bucket but I've needed more lifting power many times when using a load on the pallet forks.
@TractorTimewithTim4 жыл бұрын
Harder to be objective with pallet forks. Distance from pin is critical
@eosjoe5654 жыл бұрын
@@TractorTimewithTim Understand
@mikegraziano15624 жыл бұрын
@@TractorTimewithTim If you use the same forks for the test it's apples to apples, right? Suppose you could try 2 different length forks on each set of arms.
@josephbenge87074 жыл бұрын
Great experiment, if you were working in a lot of uneven terrain that could increase safety quite a bit. What is the maximum out of level distance you can go before the MSL is no longer effective? Glad you are doing good health wise! God Bless!
@michaelelkins97394 жыл бұрын
What kind of weight can you lift when you curl the bucket??!.
@frankboggs4 жыл бұрын
Hey do they spec the same tire pressure for that loader?
@TractorTimewithTim4 жыл бұрын
Dunno. I was running 32 psi. Checked right before the test
@ptek11854 жыл бұрын
@@TractorTimewithTim Tim, do you mean 22 psi, or are you running 10 psi over the max pressure of the front R4 tires? (Not judging, just curious). I've also noticed that my Versaturfs seem to sag a bit more than my R4s did, due to the radial vs bias ply design. Probably affects my max lift height a bit.
@TractorTimewithTim4 жыл бұрын
32 psi. Loader manual said to raise by 10 I think. ...but maybe I misread.
@seanclarke52934 жыл бұрын
Can you feel a difference in the curl of either? Maybe getting a load cell like Neil Messick uses for his tests?
@garynelson47494 жыл бұрын
hopefully its in your plans to show the curl range differences ....they are considerable on some nsl vs msl loaders
@rogerf36224 жыл бұрын
Good analogy guys. Just consider that tire pressure/type would affect lift height when comparing to factory specs. Imagine how high you could lift if the front tires were steel. But in any event you answered the 64-thousand dollar question...lift capacity for both is virtually the same in the real world. Its even harder now to justify the added expense of self-leveling.
@TractorTimewithTim4 жыл бұрын
32 psi in front tires.
@xraytester4 жыл бұрын
Would love to see a video of how you adjusted the hydraulics
@jasonsoutdoorsports86323 жыл бұрын
Same here
@SC13NT15T4 жыл бұрын
Hey Tim. You mentioned in a reply to a comment in the previous video that you will likely keep the MSL and return the NSL. If the 1025r was the only tractor in your barn would you make the same decision?
@TractorTimewithTim4 жыл бұрын
Hard to say.
@adamwells89604 жыл бұрын
Very good test. Nice job as always. The results surprise me based on the specs, but when I really think about it, it does not surprise me. These tractors will pick and carry whatever fits in the bucket, and then dump it over the side of a dump trailer. But that alone can be enough to tip you over if not careful, even with a backhoe, wheel weights, and loaded tires. I can't see adding more capability to it and having anything to gain, besides marketing. I've got a JD 2305 and have had a big enough log on the grapple it stalled the power steering...had to set the load down to turn tires and continue. It doesn't need the ability to lift anymore than they already do.
@wendyandjodymaillet75034 жыл бұрын
Very informative video...Glad you’re feeling better!
@bullandaliciasaylor36744 жыл бұрын
What’s the temperature difference between the first time with cold hydraulic oil and second test with hot oil that would make a difference
@jackriley41044 жыл бұрын
Do you have the ballast on the rear the same as it was on the first test?
@TractorTimewithTim4 жыл бұрын
I drove out of the shed, changed loaders, and backed back into the shed, attempting to get it in the same position. So, probably 2 oz less diesel in the tank...other than that, no changes :-)
@paulmorgan18974 жыл бұрын
Good test. I wish you could test a H130 loader like I have on my 2032R. I have been told I’m stretching it with some of the big tree trunks I lift as well as a few other things. I would like to know what the actual capability is with weights. Anyway good demonstration and test.
@iamdrako4 жыл бұрын
I would be curious if temperature makes any difference. I don’t know that it would make any difference between the bucket systems, but I would find it interesting if it made any difference to the hydraulic system as a whole. An old wood splitter we used was real temperature sensitive. Enough so that we needed to instal a small cooler on the return line. On that splitter the return was spring loaded, it didn’t use hydraulic to return. While I have seen temperature effect hydraulics on others machines, I wonder if it has any affect at all on a tractor. It is very good to see you are feeling better! I hope that trend continues!
@s12834 жыл бұрын
You changed your hydraulic pressure? Did I miss a video on how / why you did that?
@TelescopeJunky4 жыл бұрын
Need a good set of work 🎧 going to try these, thank you Master Tim! 👍🙂
@farmingwithmitchellmorgan70414 жыл бұрын
I know this is a bit random but do you still have casey haven't seen him for agers
@TractorTimewithTim4 жыл бұрын
Nope. They took Casey away. Oh well!
@FishFind30004 жыл бұрын
Tractor Time with Tim any idea if there gonna loan you anything else again?
@tomcarter98164 жыл бұрын
Excellent real world effort, love all your videos! God Bless
@tractorboy314 жыл бұрын
If doing this kind of test again. Set the gauge up in line with the lift line so you can see the pressure with the actual load
@brethopkins68364 жыл бұрын
How did you change the hydraulic pressure from 1800 to 2000 psi? Is there a setting or a software update?
@TractorTimewithTim4 жыл бұрын
Sorry, we can not provide guidance on this for liability reasons.
@johnmcadams47384 жыл бұрын
Hey Tim - this is exactly the information I was looking for when comparing the two loader options for my upcoming purchase. I'm still leaning towards the MSL because of the ease of operation (especially for a rookie like me) but I have a question about the quick park feature of the MSL. You stated in your first video the "detailed walkthrough" that the MSL had a bit of an issue with parking the loader or was it the reconnection (I can't remember now) - namely with releasing/connecting the hydraulics. After using it for a while now has this issue worked itself out and if so how? Looking forward to the next video. Thanks Tim & Christy too! Blessings to you and the family-
@alexdotluna4 жыл бұрын
I think, simply put, the bucket cylinder must be fully closed, and the lift cylinder fully extended, BEFORE, releasing the pressure on the loader.
@TractorTimewithTim4 жыл бұрын
I did NOT read that in the operators manual.
@alexdotluna4 жыл бұрын
@@TractorTimewithTim Hey Tim, weird, do you have the OMPXX12554? Page 35-6, point 9 states the note about the cylinders. The procedure is a bit different from the non self-leveling.
@TractorTimewithTim4 жыл бұрын
justarandomguy I’ll read that a bit closer when I get a chance. Thanks!
@MrBemma14 жыл бұрын
This was really great. My only point of clarification is the weight itself. Was the weight of the bucket factored in to the final numbers?
@TractorTimewithTim4 жыл бұрын
The specs include the weight of the 49” bucket. We have 53”. ...and the point of the test is the comparison of the two loaders, not the absolute capacities.
@brosselot14 жыл бұрын
I would have assumed that with the new loader there would be a small mechanical advantage over just the conventional loader. But I also think that the way you do the real world test is the way to go. Take it easy and get plenty or rest and if you don't know what Leever A does Leever B. Thanks for Sharing Tim.
@wrgann4 жыл бұрын
Off the topic of lift capacity, the Artillian splitter doesn’t appear impeded by the movement of the loader. Did you have to move it to improve its placement?
@TractorTimewithTim4 жыл бұрын
Have not moved it, nor done anymore testing.
@ShaneZettelmier4 жыл бұрын
There’s also an adjustment on your hydraulic pump I believe it’s sort of a governor/limiter and I’ve seen several people say they can get it up to about 2300ish by adjusting that out. As far as your test being a little different, it’s possible that they didn’t adjust the bucket for level and you were measuring off of the bucket not the pin so that may have accounted for a tiny bit of difference they may have just left the bucket which might’ve made it higher or lower, not sure.
@nickluft63154 жыл бұрын
Great comparison, I feel a little better about my tractor I just bought lol. Is there a way you could do a video showing how to check and adjust the hydraulic pressure? I wonder how many of our tractors are running a little low like yours was
@TractorTimewithTim4 жыл бұрын
Get the gauge from BoltOnHooks.com. Use code TTWT for a 5% discount. I’m sorry, we will not be able to help with the pressure adjustment. We want no part of the liability associated with this.
@nickluft63154 жыл бұрын
Tractor Time with Tim I get that! Thanks for the source for the gauge!
@marlinl.3064 жыл бұрын
The two of you always make excellent quality videos. Your explanations are always accurate and understandable. Congratulations. I think you can come closer to the factory specs by either standing up the weights in the back of the bucket, or maybe making some kind of rod that goes through the weight handles and locates the weights the same distance from the pins.
@greg86z284 жыл бұрын
Maybe this was mentioned - but how much extra does the MSL loader frame weigh compared to the NSL loader frame? Is it possible the "extra lift" is chewed up by the fact that the loader arms weigh more?
@TractorTimewithTim4 жыл бұрын
No, the tests are supposed to be payload capacity, 500mm in front of the pin.
@photocontrol4 жыл бұрын
Very good lift comparison between the two loaders!
@DS-pl5hi3 жыл бұрын
Tim, did you do this test on a 2025r?
@TractorTimewithTim3 жыл бұрын
No, 1025r. 2025r would have same results.
@haroldboston50804 жыл бұрын
What's the weight defferince between the two loaders . The self leveling loader should weight more.
@densamme17524 жыл бұрын
It would be better to check the pressure with a T connection inline with the line you actually are using since that test won't show a leaky cylinder. You could check the flowrate somewhat by connecting each hose to a grappler and check that the movement time from min to max is the same for all lines (pinched or deformed lines can rob you of working pressure) Remeber that lubes and alignment issues can greatly influence the amount of work that actually goes in to lifting the weights
@jimmy553014 жыл бұрын
That looks like a pretty good lift test to me. You could try a curl test with pallet forks, since they stick out further than the bucket. Glad to hear you're feeling better.
@johanbos1604 жыл бұрын
Nice video tim and kristie and good to hear it is going good with your healthy 💪💪👍
@Microphone734 жыл бұрын
Super educational and very fair.
@Frank-pv1hp4 жыл бұрын
Tim, if you can stomach it, Neal over at Messick's did a video recently where he demonstrates lift capacity and shows curl strength. They have a strain gauge connected to a chain that is run 10 feet underground to some concrete or something, Different brand (superior LOL) but probably similar to what you are talking about.
@bradmeacham69824 жыл бұрын
First, well done with your tests! I saw nothing wrong with your testing methodology. I do have to say I'm completely surprised that the MSL loader didn't lift appreciably more with the "real world" weight in the bucket loading scheme. Like you've already mentioned, I now have to wonder how the manufacturer (not just the Green guy!) is getting their published specifications for their MSL loaders.
@nclanreimer4 жыл бұрын
A few things, the lift height difference your seeing is likely due to the MSL loader being heavier than the NSL loader as you were saying tire squat/back end lifting slightly more. John Deere also likely uses a test stand for the measurements and not an actual tractor, I'm guessing they also have an Eye bolt set in concrete with a high capacity load cell to do the actual test. As for the difference in loader capacities, when I was looking through the attachment brochure the lowest loader lift capacity for a 1023E/1025R was 680 pounds so maybe the difference is a typo? or an older model spec that wasn't updated?
@simpleman41964 жыл бұрын
I believe you did a great job on the test
@ElkCreekAcres4 жыл бұрын
I think your test was more "real world" application, good video Tim. It would have been interesting to see one run at full curl, not sure how much difference that would have made to actual everyday use for an owner.
@TractorTimewithTim4 жыл бұрын
Full curl would lift more because closer to the pin. But the distance in front of the pin would change on the NSL as the loader is lifted. So, the NSL would win that test easily at max height
@stephenperich84314 жыл бұрын
The tyre sag can be eliminated by placing blocks under the front axle. Perhaps check the tyre pressure before and after each loader test.
@TractorTimewithTim4 жыл бұрын
32 psi
@TractorTimewithTim4 жыл бұрын
Tire sag is real world. We don’t really WANT to remove it. We are all about ‘real world’. Front tires were at 32 psi.
@jasonwhitler41674 жыл бұрын
It might be a good idea to calculate the max lift capacity. You have pressure already, now you just need the total piston area to get piston force in pounds. Then measure the change of piston angle and do some trig and you'll have your theoretical max vertical lift capacity. Loaders are just a big lever when you get down to it.
@TractorTimewithTim4 жыл бұрын
The specs are that calculation. But I don’t think it is that simple, as the ‘lowering’ of the curl during the lift (to keep it level) should have a positive impact on the lift capacity.
@TheCritterWindow4 жыл бұрын
Your height measurement may be lite due to tire pressure or tire size/type. To test the bucket roll hang a chain over the front. If you need help let me know I will come up and help.
@TractorTimewithTim4 жыл бұрын
32 psi. Again, not so concerned about exact number. The point is that the MSL did not lift as high with a level bucket.
@TheCritterWindow4 жыл бұрын
@@TractorTimewithTim I was not talking so much bucket to bucket as bucket the book Numbers
@christophersiano9694 жыл бұрын
Hi Tim. I don't have a loader on my tractor. I use a Boom Pole on the 3-point for most of my lifting needs (yea, it doesn't work for material, but fine for moving big stuff). I easily get 1100 lbs up. I don't know the weight of anything else, so who knows what I've lifted. The Boom Pole is rated at 2000 lbs, so I need to be careful as I think the 3PH can easily lift more. So, what do I do to make sure that I don't exceed capacity? I don't add weight to the front. If the front wheels are coming up (and I've tried to move a few logs that did this) then I'm over capacity. (^_^) All the implements I use are 1100 or lighter, so I don't have any real issue for most stuff. I was just having a good giggle here with the weights you were lifting and thinking how I'd never be able to move the huge logs I've done with a smaller machine. I have one pine log that was about 40 inches in diameter and it was cut just about 9' long and was probably the heaviest thing I've moved - I could feel the front end moving and if I was not gentle on the clutch would likely have lifted it. (yea yea, I know - safety was sketchy there) Granted, my tractor is a bit larger than your compact. It's a 1968 Ford 5000. Roughly 9000 lbs with the tires filled and 60hp. Probably similar to a Deere 5055E series machine. Never realized that those loaders were really only good for about 500 lbs. That's not a number that the marketing tends to use. Thanks for all the great shows. I've learned a lot about various implements and techniques. In fact, it was from your videos that I selected a Land Plane over a Box Blade for maintaining our gravel driveway. That has been the cat's meow. Of course, a 1000 lb 7' wide drag is a bit more capable than the ones you've used. (would have made quick work of your new shed floor) Oh yea, and I've also bought a Lube Shuttle. No more cursing at the greeze gun anymore. And I'm silently lusting after a flail mower.... (^_^)
@brettwynne86764 жыл бұрын
Why the R4 tires on the front and not the Versa Turf?
@TractorTimewithTim4 жыл бұрын
Haven’t got around to changing them. Been very busy!
@brettwynne86764 жыл бұрын
You’re too quick. After thought I had was your measurements might have been shorter with the radial tires. Didn’t you do this test on the NLS with the R4’s?
@TractorTimewithTim4 жыл бұрын
Both tests within 1 hour. Same configuration
@herk19523 жыл бұрын
Tim, I hope this questions makes sense. What is the difference in weight between the two loader systems (including bucket, arms, hydraulics, etc.)? The 120R MSL loader looks to be a bit heavier that the Non Self-leveling loader. Do you know if John Deere includes this extra weight in their specifications, thereby giving the MSL a perceived heavier lifting capacity?
@TractorTimewithTim3 жыл бұрын
Your question does make sense. However, you are misunderstanding the lift capacity specification. The spec includes the loader and the bucket. So, it is specifying how much cargo the bucket can left 19.5” ahead of the pin. So, any differences in loader arm weight would already be accounted for in this spec.
@dougsnyder54502 жыл бұрын
Great video can you do same test on 5075 loaders?
@TractorTimewithTim2 жыл бұрын
Don’t have enough weights!
@ritterjon4 жыл бұрын
💥 One suggestion I have is to use a load cell for you lifting tests instead of weights. The position of the weights in the bucket can cause discrepancies. That would save you a lot of lifting as well. I like what Neil does if you’ve seen his lift tests. *Keep on tractoring!* 👍
@TractorTimewithTim4 жыл бұрын
Don’t know how to test lift at ground level with the load cell.
@ritterjon4 жыл бұрын
What if the load cell lift system was recessed in a hole. 🤔 Then you could even test lift capacity slightly below grade.
@TractorTimewithTim4 жыл бұрын
Yes, but that would have to be at least 24” maybe 30” deep just to the top of the hole. How would I keep that dry, clean, etc? The ‘tie down’ would have to be below that.
@ritterjon4 жыл бұрын
I don’t have all the answers, just suggestions. 😁 However, something like a cinder block well pit with a cover for when not in use. Might be more work than it’s worth but it would make you cooler than Neil! 👍 ..... maybe You did make a pit for a trampoline. Another idea, if you have a loading dock ramp. 🤔🤔
@TractorTimewithTim4 жыл бұрын
Yea, we talked about using our lift. ...then figured the safety nazis would not approve.
@treemonkey_ma17184 жыл бұрын
Did you or do you have a digital guage for reading pulling strength! I thought I remembered an episode that you had 1, I could be mistaken. But you could mount that and take a reading using an adjustable strap! That way you wouldn't need to move the weights and it should be more accurate verses within the 40lb weight
@TractorTimewithTim4 жыл бұрын
I have a load center. Guess I would have to dig a hole and bury something with hook on it.
@treemonkey_ma17184 жыл бұрын
@@TractorTimewithTim Depending on the amount of load, you can anchor it to a rock, piece of concrete or even an implement. As long as it doesn't exceed the lifting limit of what you are working with
@eosjoe5654 жыл бұрын
@@TractorTimewithTim Hook it to the side of your deck-over trailer. The 120R isn't going to lift that. :-)
@TractorTimewithTim4 жыл бұрын
But can’t test lift capacity at ground level unless I have room for load center UNDER the bucket
@eosjoe5654 жыл бұрын
@@TractorTimewithTim True
@BradMyers4 жыл бұрын
ISOTunes was sending you a hidden message that you need to switch colors. :)
@emrythompson4 жыл бұрын
Brad Myers, the owner of ISOtunes must be a Kabota dealer and needs the business! HaHa!
@jerrybrock53354 жыл бұрын
Close enough for a good comparison. The only thing you can do to eliminate the tire squatting is put a jack stand under the axle but I don't think it's necessary for your comparison. Thanks Tim
@billhayward9554 жыл бұрын
I do have to say your methodology is a very good way of testing. but you do have to consider the curb weight of the loader by itself without the tractor or bucket. The MSL Loader has more mechanisim to is so it will have a higher curb weight than the NSL loader. Thus weighing down the front of the tractor and yielding different max lift heights with and without weight. An easy way to adjust for this is to take a measurement from the same point on the front of the tractor frame and the variance of that between each loader will be a gauge of how much the loader will vary. Due to principles of levers and physics it will not be a direct adjustment of the difference applied to the loader height. In short, Great comparison. I look forward to seeing more content and review of the MSL loader.