Trane sensor bind in step by step TechView

[@swank1975]

This video was a lifesaver today. We had a new oil pump high current relay board installed but needed it bound. Easy download and install of Techview, used the magnet on my flashlight on the board beside the com cable connection to get the green light on then it bound and we're up and running again. (replaced the capacitor at the same time). Thanks for sharing.

[@ZeroGameplays117]

Ur the Best, men

[@GrumpFish22]

Thanks for the walk through. Saved me a lot of money!

[@Junkremoval-hvac]

Glad I could help more videos to come

[@autolancegega599]

Thanks a lot for sharing this video and it was really helpful. I will share the video with my other colleagues. Keep posting new videos and may your channel grow.

[@kurniawan76]

Nice info ... Thank you bro

[@leeeng478]

Thanks man we have the same system. Tons of good information!

[@HVACTechGuidebysreejith]

Valuable information. Thank you sir

[@bernardviyuyi8974]

Great video. We have a situation where we can't reset communication loss fan stage 1,2 and 3. All plugs and the cable are OK. What could be the problem?

[@Junkremoval-hvac]

If plugs and cables are good it has to be what they are wired in to like a bored or something went bad.

[@abdelouahedchibane]

Ok merci thanks

[@edwardcrane7520]

Awesome video

[@farovonsultonov9089]

Is it possible to lower it to minus -12 Celsius?

[@saniabdullahi393]

How do I resolve IPC communication loss on the train chiller CH530 .Thank you.

[@neilskelly7970]

❤

[@طالبحسن-ك8ه]

Is it possible to get Castrel View

[@_Padma_TausikHasan]

Why is it necessary to hold a magnet on the LED to bind the sensors of the trane brand chiller? Why and how does the LED light up when you hold the magnet?

[@Junkremoval-hvac]

Not sure how but using the magnet lights up the sensor. Reason you light it up is because they computer will ask if it’s lit up so it knows the proper sensor to bind in. There are many in the system.

[@irfvnfaedah5776]

Sir,i have some binding issue,i can lightup the led at the liquid level sensor,but when i bind the techview says unnnable to find selected device The liquid level is a new part installed Then i do binding the old liquid level and i had same problem, i have change module ch530 and doesnt work , is my new liquid level part is defective

[@maxwolfhunt23]

hello, is this working for the expension valve? Tank you

[@diananggara5977]

hello sir, can i get trane chiller software?

[@Junkremoval-hvac]

Yes just have to go to trane website and download off there.

[@andryushkurin2287]

Show and explain how to tie and untie the control boards

[@Junkremoval-hvac]

I will definitely show once I run across that. Have not yet.

[@EfrenBParal]

Hi where can we download software CH530

[@onesimpleman1]

Where can I get software to bind sensors ?

[@Junkremoval-hvac]

www.trane.com/commercial/north-america/us/en/products-systems/building-management---automation/chiller-controllers.html

[@nafissiddiqui5009]

From where we can download and install Techview CH 530

[@fkdeazevedo]

Why is it when I click local connection it ask me to select communication port com 1, 2 , 3 which one is it ? Do o Try em all to see which one please help. I have techview latest version 14.0 and the 14.0 sp16 install both please help.

[@Junkremoval-hvac]

I have not ran into this issue before. I would say, yeah try em all see what happens. Sorry unable to help in this question

[@jevonhoward]

Go to device manager on your computer while the adapter is connected to see which Com port is in use.

[@onesimpleman1]

Where can I get tech view software ?

[@Junkremoval-hvac]

Go to trane.com or type in tech view software to google and it will pop up. Download it from there or email it to your self then download it to your computer later on. Let me know if it works.

[@paulooliquino9461]

sir where I can download software? techview

[@Junkremoval-hvac]

Google trane TechView it’s the second icon down then have it send to your email then download from your email. I will do a video on it here soon. No problem. When you google it, it will say trane QC click that then it will take you to the download page.

[@paulooliquino9461]

@@Junkremoval-hvac the trane page was not found... just wait for your video how to download software....

[@paulooliquino9461]

@@Junkremoval-hvac techview software will work also in cvhf1300? or for ch530 only??

[@julianass7354]

@@paulooliquino9461 try with this link, is directly with the Trane page: www.trane.com/commercial/latin-america/cl/es/controls/HVAC-equipment-controls/trane-lontalk-controllers/TechView.html good luck!

[@julianass7354]

@@paulooliquino9461 trane techview y only for CH530, newer centrifugal chillers are with another control system, techview is not supported.

[@dadykr9645]

Hi, Many thanks for this helpfull video I want change damage trane sensor X13650726100 Sen02133 . please , i use UC800 conntroller, is it necessary that i bind the new sensor after i replaced the old damage one?

[@Junkremoval-hvac]

Yes you have to bind in the sensor. Thanks for watching.

[@dadykr9645]

@@Junkremoval-hvac , please what i need to bind it?

[@jevonhoward]

Tracer TU software for a UC800

[@edwardcrane7520]

Hey you might want to teach them how to unbind first

[@Junkremoval-hvac]

Every time I have found 1 that has failed it’s already unbound. The system is already not seeing or reading it.