Traxxas Monster Slash 4x4 Battery Comparison 2s vs 3s LIPO 25c to 75c to 150c burst

[@calebreeve8694]

He is murdering that slipper clutch

[@buffalodiehard]

Slipper is SCREAMING

[@connorscaff1201]

Good tip: when ever you put larger tires on any vehicle, tighten up the clutch bc mine did the same thing, so tighten the clutch up and you’ll be fine

[@fullthrottleobsessions]

That is a good tip bud, I ended up going a bigger clutch set up to get it to bite even harder then the stock set up

[@VenomGT87]

Thank you for this video! I was big into nitro and I am now switching over to electric and just got one of these trucks and being new to the lipo batteries had no idea what to get; great comparison, ended up going with a the traxxas 3s 5000.

[@fullthrottleobsessions]

VenomGT87 right on bud, you're going to really like the electric stuff especially with these new lipos the technology has came a long way and the best part about it all is that there's no tuning involved or oily nitro lol

[@VenomGT87]

So far I am impressed, this thing is FAST, the one thing I am realizing is that this one so light the wind picks it up at speed, broke all the hubs yesterday because of that, just ordered aluminum ones...and new tires lol

[@FSX239]

How long can I expect from a battery? The sales person at Willis Hobbies on long island told me a buddy that up to an hour runtime can be expected. One thing I liked about Nitro is all you need to do is put more fuel in. How many batteries will I need if I want to be out for a day.

[@paulmccarter908]

FSX239 Maybe I can help. 15-20 min per pack, takes about an hour at 6amps to charge one. I'd say three batteries and a 12vdc charger that uses 12v automotive. That works for me, because I don't swap packs immediately, and speed runs aren't much fun imho.

[@M5compcs]

Paul Mccarter with the 5000 3s 45 minutes can be expected if your not driving it too hard

[@tezmoran3284]

Sounds like the slipper clutch is loose

[@urg_beast1864]

Tez Moran yea very

[@allnightrelaxingsounds9346]

yeah it would be taking off much faster

[@braydenstamps8511]

Tez Moran I would agree with u but the tires are spinning and spit up a lot of dirt and shit so Idk.

[@braydenstamps8511]

Tez Moran I wouldn’t be able to tell unless u I drive it with it tight

[@lifethroughalens2000]

yes very

[@MarshallSmith27]

I really really love how you trimmed the shell

[@fullthrottleobsessions]

Marshall Smith Thanks bud, i really didnt want to trim as much as i did but i think it came out ok

[@adamsdailydriveway]

Also on dirt/rocks u got good speed, but if it were on the street u can deff hit 60s, I have 3 slash trucks, love them!

[@fullthrottleobsessions]

Right on bud do you have the 4wd or 2wd slashes? Theres definitely no shortage of power and speed with these trucks especially on 3s

[@808galvatron]

The c rating is not about how fast it goes it's all about the punch and take off.

[@fullthrottleobsessions]

Zeno'sama that's not completely accurate bud, the first rating (burst) is about how fast it takes off, as you can see these have a 150c burst and a 75c continuous rating which is why the top speed is greater than the lower C rating packs

[@smallfry1463]

I can't keep mine from catching air.. it backflips on me during speed runs around 50, I never was able to Max it out yet.. need new body, I'm not trying to be that guy running tough with no body for fear something happens.. my hats off to you brave sir! .. tightened clutch damn near all the way down, 3s lectron 5200 mAh 50c.. gearing :84s and 28p 3500 kv reaktor with stock veta karoo tires.. (super grippy, it's the 2wd slash)

[@fullthrottleobsessions]

James Curt I know what you mean Bud that body is so big makes this RC feel like a kite at higher speeds, i picked up a heavier clutch setup for this truck because the factory one almost always ends up slipping on me

[@mikelade1272]

Cut some holes is the back side of it let the air pass threw. figured this out on accident when I used the body from the gas car

[@scottharris6423]

That was so cool Nice job.

[@fullthrottleobsessions]

Right on thanks bud

[@PhillipJohnsonJRpHILtHEbLANKS]

Always check your ride before crusin.... the talons all rip with 3s, you have to be sure to reinforce or get some bead lock rims. Should’ve ran while holding in the air to see the tires most likely shaking from the drive lines or whatever is throwing those tires off balance .... cool video though

[@TheMasterMoto]

Full throttle on 3s just wants to flip. My Traxxas Slash 4x4 anyway. Does have upgrades driveline and suspension though

[@fullthrottleobsessions]

This one's the same the slipper clutch was really loose in this video which is why it was more manageable on take-off

[@waffleboi2110]

those tires and packs are gonna put a number on your driveline dude

[@fullthrottleobsessions]

Fine_ Gamer they defiantly will bud, i normally run on 2s though, the 3s packs i run in my x-maxx

[@EJ-om1wu]

seems like you have more experience than me, what do you think about going with a brushless velineon motor on my rwd slash?

[@fullthrottleobsessions]

I think you'd be good brother, you'll definitely have some traction issues with the rwd but you'll have plenty of power

[@bparks_5095]

Im running the Velineon brushless setup on my Slash 2wd and its great! I've run 2s and 3s (I prefer 3s). It hooks up great on pavement, off road is definitely squirrely and it's hard to get the power down for sure lol

[@harleyryan8696]

sounds like you need to tighten your slipper clutch :)

[@chandlersours3633]

My very first thought on ur first run was "damn that slipper is SCREAMIN!!!". It needs to be alot tighter than that.

[@fullthrottleobsessions]

It definitely was loose unfortunately that day I didn't have my tools with me so I decided to film anyway, this beast has an upgraded heavy duty slipper in it now the pads in the old slipper were tossed after this video

[@TOPRCBrasil]

Excellent video! congratulations

[@fullthrottleobsessions]

Right on bud thank you, I appreciate the support

[@taevy12]

i tried convert my slash to a monster trunk. it aint worth it. once I started pushing big tires , problems started to occure. esc heats up, driveshaft starting to bend and all sort of things. I ended up paying more than buying a true 1/10 scale truck. so don't do it people. or you will get very frustrated

[@husssein5153]

thnx for ur input

[@meese1k]

thanks for the tip dude! sorry im so late to this comment lol

[@SkippyZ93]

If you were using the stock motor and esc, then yea it’s gonna get hot but you need to have a brushless motor and don’t use a 3s lipo unless you have aluminum drive shafts. And when putting bigger tires on it you have to Change the gearing. I’ve had my slash monster truck and it’s lasted for 3 years. Everything stock except the motor and esc. It is worth the upgrade Don’t just take someone’s word for it, take the time to research

[@BrazenFlux]

@@SkippyZ93 Do you have a recommended motor? Or motor specs?

[@CmwSpeedrunUk]

Great video 💪🏽❤️👍🏽

[@fullthrottleobsessions]

Thanks buddy, I appreciate the support

[@CmwSpeedrunUk]

Pleasure from uk 🇬🇧

[@MonsterTruckClassics]

Can you swap the tires back and forth if you wanted to?

[@fullthrottleobsessions]

MonsterTruckClassics yeah thell still swap out, nothing change on that part I kept the stock wheels and tires just in case I decided to swap them back

[@MonsterTruckClassics]

FullThrottle Obsessions Thanks for the reply!

[@fullthrottleobsessions]

No problem bud, Thanks for watching

[@Yellow_6.2L]

MonsterTruckClassics yes

[@S197Matty]

People think c rating will get you more speed. This simply isnt true. C rating is nothing but the safe discharge rate of the battery. You putting a 25c and a 75c, or even a 100c wouldnt actually get you a better top speed. The speed control and motor are still drawing the same amount of amps on both batteries.

[@Rowdy106]

What did you do to make it look like a monster truck did just the trimming make it look that much higher?

[@fullthrottleobsessions]

The trimming had alot to do with it along with the bigger 2.8 tires and wheels heres a video of what i did to it in the conversion if youd like to check it out kzbin.info/www/bejne/ZmTIdpZpebyoeNE

[@johnnypowell87]

man this is crazy!!!

[@josiahkunstman8168]

And that’s why I buy proline tires:)

[@fullthrottleobsessions]

Some Prolines are next on my list

[@fullthrottleobsessions]

Some prolines are next on my list

[@tropicthunderbolt]

Thats all ill use too. Every other tire I've used has either cane unglued or didn't last too long.

[@gorillabeartech4577]

How is the power hobby battery ?.... I was thinking of buying me a couple for my big Traxxas e Revo 1.0 buddy. I also just had someone order me a 40-80C hard pack 3S 4000-4200 mah lipo. Vants an awesome company. I look forward to more Rc videos from you dude. I always re watch your older and newer stuff.

[@fullthrottleobsessions]

Right on bud I appreciate the support, I definitely have alot more videos coming your way. The power hobbies battery packs are awesome man iv been running them for quite awhile now with no issues, there my second favorite packs

[@gorillabeartech4577]

FullThrottle Obsessions I had the Lectron Pro 5200 mah 50C soft pack 3S each lipo batteries at one point and I ran them in my big Traxxas e Revo 1.0 with the blue body like the one you own currently. They are perfect in the e Revo 1.0 or 2.0 versions man !!!!!. The Lectron pros were even run independently on 3S in my slash’s, stampede and rustler/bandit 2wd’s at one point and they are PERFECT. I would say the Power Hobbies lipos are probably just as good as the lectrons or maybe better. The lectron Pros were AWESOME.

[@jalee6587]

You need to do the test on the same surface.you can’t pick the smoothest road for the 3s 150c pack and the crappiest road bumpiest for the traxxas 3s

[@fullthrottleobsessions]

I agree bud but that first road was just to narrow for how fast the truck was going so unfortunately we had to change roads I had to compromise the smoothness for a wider Road

[@marianoblanco2981]

Did you have to cut the body to make the tires fit

[@jamesgoodwin2450]

At one point I thought you were going to go back to the future 😂

[@lilnash7]

Yeah thing was insanely fast

[@8speedhellcat889]

My slash 4x4 ultimate 2019 does 45 mph on 2s venom 100c my gearing is a 32 tooth pinion and 54 tooth spur it flies.

[@fullthrottleobsessions]

Right on bud that really is moving for a little slash, do you run it on or off road with that gear set up?

[@8speedhellcat889]

FullThrottle Obsessions I actually do both! I have to let it cool down but I have a cold air blower that I use and I let it sit for 10 mins and run for 15. It does 45 mph on pavement around 41 mph with big tires in the grass. I had to get something fast for my dog to chase in the yard so I had to upgrade tires and gearing to make the car fast enough lol😂 Also... when you tighten the slipper clutch all the way down go 1/4 turn backwards if you don’t you could over heat your motor👍🏻

[@jughead3200]

That’s pretty good with them tires go back to the factory size and will be hitting 60mph and better for the motor and clutch

[@kylewashington3106]

I was just about to say go to smaller tires

[@fullthrottleobsessions]

Thats not a bad idea bud, i just might have to compare the speeds with the differnt tire sizes

[@dantheman20127667]

The top speed will be slower with the stock sized tires... unless his slipper was slipping the entire time from the MT tires. Larger tires have the effect of a larger pinon, or smaller spur, but the bigger tires put more stress on the clutch because of inertia

[@kevinbates3575]

I only use proline beadlocks wheels and tires for that reason

[@fullthrottleobsessions]

Im going proline aswell bud, these traxxas tires are just to soft for running this truck on 3s

[@rsracing-mb1tr]

Dam at the 3:30 Mark ouch you can hear it the alipper clutch scream.but it's all part of trial an error an I read you got a heavier slipper

[@fullthrottleobsessions]

It definitely takes some trial and error originally the clutch was perfect but needed to be tightened once I put these bigger 2.8 tires and wheels on but i have since upgraded to a heaver clutch set up

[@rsracing-mb1tr]

@@fullthrottleobsessions oh yea def trial an error like last night trying to make my bandit long travel all the way around am I finally got it lol an I didn't spend a dime lol all parts I had but I love my powder hobby bat I got the 3s 5200 50c with 100 burst I bought one thinking it wouldn't power hobby. It front it's arrow hobby lol but a great bat an what pinion you ru being stock with high speed or 54 15t pinion.

[@fullthrottleobsessions]

@@rsracing-mb1tr right on bud thats awsome, the bandit was my first hobbie style rc i still have it but one of these days i have to give it some serious TLC lol, i believe i kept the stock gearing i know i wanted to gear it lower do to the bigger tires but i dont think i did

[@rsracing-mb1tr]

@@fullthrottleobsessions nice the bandit I just recently got it's an older one it had the servo yo switch forward an reverse lol an man I did some suspension test last night was cool seeing it go over shit an not tip over lol go check it out if ya want to would love some input from ppl.

[@fullthrottleobsessions]

@@rsracing-mb1tr right on bud ill definitely check it out, thats crazy when i purchased my Traxxas Bandit back in the day they came standard with mechanical speed controls i used to have to take it apart and clean the contacts quite often. Did yours still have the old 20-turn Stinger motor?

[@Elevate_Fitness6930]

where you running on the stock gearing for your speed tests

[@fullthrottleobsessions]

The gearing was stock in this video

[@Elevate_Fitness6930]

@@fullthrottleobsessions thanks man

[@travispittman1356]

What app is being used to see how fast it’s going?

[@fullthrottleobsessions]

I really cant reamember witch app i used bud

[@Mrmizzy55]

can you give me an idea what your average run time is for the 5000 milliamp 25 C

[@8speedhellcat889]

Ryan Myers on average for a 4x4 17-20 minutes of hardcore pedal to the medal driving. You can make it last for 30 mins if you baby it. In the cold about 12 mins.

[@fullthrottleobsessions]

It defanatly depends on how hard I'm running it but I think a safe guess on average would be around 20 minutes or so

[@paulmccarter908]

I'll throw you a like and sub; I have a monster slash(ebay buy) coming in the post, and nearly the same idea; big tires, raised body, fully extended shocks..

[@fullthrottleobsessions]

Paul Mccarter right on Thank you for your support bud, you'll have a blast with your slash, its one of my favorite trucks

[@206beastman]

Duct tap the inside of your tires its like steel belting and tighten the clutch all the way

[@fullthrottleobsessions]

Right on bud that's a great tip, I'll defanatly be trying that on my new set of tires

[@tropicthunderbolt]

And that stops the ballooning. Or just the glue issue

[@adanlopez5155]

How has your Tra xxas 3s been holding up

[@fullthrottleobsessions]

This truck holds up surprisingly well on 3s in my opinion, it does have some aftermarket stuff on it though

[@adanlopez5155]

Ok thanks

[@Blackwood_747]

Are you out In apple valley ?

[@fullthrottleobsessions]

Right on man good guess, I am in Apple valley

[@TheTylerjoy04]

Was the last battery a 2s or 3s??

[@fullthrottleobsessions]

TheTylerjoy04 the last battery run was on 3s

[@TheTylerjoy04]

FullThrottle Obsessions Ooh, WOOW!! C rating does makes a BIG Difference, Compared the 25c traxxas battery..

[@Fats-yg1jd]

use must be using the 13 tooth pinion ?

[@fullthrottleobsessions]

simpson washington the gearing is still stock bud, ill be changing shortly

[@bif24701]

Traxxis stock tires/wheels are total crap,go PROLINE!!!!!

[@SidWalter]

bif24701 there not at all bad you probably don’t even own a rc

[@jdmikeg4]

The stock tires don’t suck. It depends on what type of terrain you run on.

[@RobertNES816]

The stock tires are actually really good.

[@ricksprings]

Looks like Ridgecrest, what desert city is that? And 5:01 horrible idea bro!! Speed run, in dirt, body removed, with cell phone!?!

[@fullthrottleobsessions]

That's a good guess bud I'm about an hour or so away in the victor valley, trust me my phone wasnt that old at the time I was sweating it the whole time I was running it without the body lol but some of the best memories come from not so good decisions lol

[@RCKING1]

What half shafts are those?

[@fullthrottleobsessions]

I'm running these Hardened Steel Driveshafts there a little pricey but there some of the strongest shafts i found i even put a set on my brushless rustler www.ebay.com/itm/Hardened-Steel-Driveshafts-CVD-Kit-For-Traxxas-Slash-VXL-4x4/282631142030?epid=934813310&hash=item41ce20fa8e:g:SPcAAOSwo4pYLn8S:rk:13:pf:0

[@RCKING1]

FullThrottle Obsessions do they hold up?

[@fullthrottleobsessions]

@@RCKING1 I haven't had any issues with them so far, id say there worth the extra money there made really well

[@nelsonthomas3409]

The last battery sound like the clutch is sliping ?

[@fullthrottleobsessions]

The slipper clutch was slipping the whole video, it just was a little more noticeable with the stronger packs. no worries though it has a bigger slipper clutch assembly now so there no more slipping

[@peppepeppe7801]

Speed with 75c is...?

[@fullthrottleobsessions]

Peppe Peppe 47mph is what i ended up with but it still has more i started having problems with the slipper clutch and also the tires started coming un glued

[@nancyblakeslee4945]

Slipper is definetly loose..and im confused at 31/76 2s 5800 mah I get an easy 43 mph

[@MrRdizzle01]

Is that stock pinion and spur gears ?

[@fullthrottleobsessions]

This was with the stock gearing

[@gorillabeartech4577]

NICE !!!!!!!!

[@RobertNES816]

From the start of the video I could hear your slipper clutch slipping badly. You should've tightened it up before hand, with it slipping like that your top speed was being affected.

[@fullthrottleobsessions]

It was really loose in this video unfortunately when I was on location I didn't have my tools so I couldn't tighten it up, on the positive side it kept the truck from spinning uncontrollably on the loose surface and really didn't affect the top speed as much as the tires did that day

[@Alejandrof2006]

What gear you have?

[@fullthrottleobsessions]

I believe I was running the stock gear ratio in this video

[@taashif4934]

You didnt swap the pinion its supposed to go 60 mph and your slipper clutch was way to loose

[@fullthrottleobsessions]

this was a battery comparison to show the difference on the battery ratings there selves not an actual test of the trucks top speed, the slipper was toast in this video bud

[@teslacybertruck750]

Because Its not running on road smartie.

[@Yellow_6.2L]

Make sure your spur gear is tight....if not it will go slow then ho fast....like your slash 4x4 is doing.....3s is fast but you can go faster

[@chrsmcwtrs]

awsome RC 2cell 3 cell 4 cell 6 cell doesn't have anything to do with speed that's just storage... 20c 30c 45c... Thwts the speed.. The higher the discharge rate makes it faster

[@Yellow_6.2L]

chrsmcwtrs yes ik that..but you slipper clutch is really loose...try to tighting it up

[@eckythump6429]

Er no! The motors KV is rpm per volt. More cells in series = more voltage = more rpm = more speed...... There is an increase in amp delivery with higher C rating which gives some increase in speed but really your batteries should have a higher C rating than the motor can draw to prevent them failing.

[@jimmyphan3165]

Do you need the fans on 3s?

[@fullthrottleobsessions]

You don't have to run fan's to run on 3s but it's definitely a good idea to keep your temps down

[@robg3836]

Was this on stock pinion

[@fullthrottleobsessions]

I believe it was the stock pinion

[@Ryan318l]

The spur fear is probably not even a thing anymore. Alls I heard was the spur gear and the pinion gear fighting each other. Or the sipper clutch was just burning.

[@fullthrottleobsessions]

It was the slipper slipping it was a little to loose.

[@HH-zg8zm]

You cat run 2 s on stock pinion it's set up for 3 s . Put the 19 on it and it will go 40 plus with the bluetooth add on you can push power to 120 percent . It's the only gear for 2 s per traxxas . Runs fast less breaking of truck better turns. Have fun .

[@HH-zg8zm]

Ps did speed test gps 5 mph slower than 3 s road test less rolling on turns great landings on jumps. And spending less on parts.

[@user-dz2jv4in5z]

S L I P P E R I S L O O S E !

[@fullthrottleobsessions]

It was loose in this video, I ended up putting in a bigger slipper set up in this truck

[@braydenstamps8511]

What app u use

[@fullthrottleobsessions]

Brayden Stamps i cant remember what app it was bud that phone ended up getting destroyed not to long after this lol

[@joelsando-1697]

Is that Barstow?

[@fullthrottleobsessions]

Your really close bud, this is about 20 minutes from there in apple valley

[@perry5526]

Damm ty

[@addiegutierrez2369]

So what tires does everyone recommend these are obviously not for high speed

[@priyanshuprajapati8567]

where you buy this

[@fullthrottleobsessions]

i order it from amazon heres a link if you'd like to check them out www.amazon.com/gp/product/B00WOZCV2Y/ref=as_li_qf_sp_asin_il_tl?ie=UTF8&tag=prepperzsourc-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B00WOZCV2Y&linkId=a741030fa620e45a8f2ec1b26302d9a1

[@Yellow_6.2L]

priyanshu prajapati local hobby shops

[@calebbennett6947]

What does the 25c and 75c mean

[@fullthrottleobsessions]

Caleb Bennett its the continuous discharge rate the battery can handle, the higher the number the faster the battery can discharge itself

[@Greeen0]

I discharge pretty fast

[@twinturbotony93]

The c rating is how many amps continuous the battery can put out. 5000mah 25c is 125amps continuous. 5000mah is 5ah. So 25x5= 125

[@Madijustis]

What gearing mate 11/54?

[@1etergen]

Hey your in antelope valley.

[@fullthrottleobsessions]

1etergen your pretty close bud im in the Victor Valley which is roughly about an hour away

[@xluigix333]

1etergen I'm in the antelope valley, what's up?!

[@jrc-fabs1634]

Sounds nitro

[@fullthrottleobsessions]

I love how the fly byes sound, It just screams bye

[@tblk2186]

Well that's fun how bout trying to run a course?

[@fullthrottleobsessions]

Thats a pretty good idea bud, i think i might have a prefect spot picked out

[@bohdilama]

Looks Ike Arizona.

[@fullthrottleobsessions]

Not a bad guess at all bud, I'm in California though

[@evano507]

The slipper clutch

[@fullthrottleobsessions]

Yep RIP, it has a heavy duty slipper in it now

[@popwall4297]

you would think one person telling you your slipper clutch was loose would be enough probably most of them that's telling you that don't even have an RC

[@fullthrottleobsessions]

Right lol it's all good though brother I get a kick out of it, running the slipper a little loose actually help me control the truck a little better on the loose terrain I was running on though I didn't mean to have it that loose but unfortunately once I was in the location were i was filming I some how forgot my tools so I couldn't make any adjustments to the slipper

[@lucaspoole8866]

Tighten that sleepr omg lmfao

[@carsspotterqtr7932]

Set the gear mesh correctly the motor is a bit far from the spur or pinnion gear whatever is on the motor

[@ddbrink663]

on 3 s the stock esc will overheat pretty quick

[@fullthrottleobsessions]

Actually man I installed an esc fan early on and run on 3s 99% of the time with no issues

[@perry5526]

Slipper clutch slippin

[@perry5526]

Last one to m7ch

[@fullthrottleobsessions]

Oh yeah big time I didn't have my tools to tighten it up, but it has a better slipper now the old one was toast after this run lol

[@ricklatray4886]

lol he says you can hear the tires ballooning u can hear the slipper clutch screaming too

[@BuckeyeBallistics]

Looked way faster than 40 some mph...

[@fullthrottleobsessions]

It dose look faster then what it was saying, who knows how accurate the app was though

[@BuckeyeBallistics]

@@fullthrottleobsessions Chase it with a car lol

[@fullthrottleobsessions]

@@BuckeyeBallistics i was just thinking about doing that lol, i think ima test the apps out with my car to see how accurate they actually are

[@BuckeyeBallistics]

@@fullthrottleobsessions I'll watch.

[@tropicthunderbolt]

Should have tried the venom. I like thems better then traxxas

[@fullthrottleobsessions]

I personally never owned any venom packs but always heard good things about them, you never know I just might have to give them a try

[@adamfacey5555]

Bro your slipper clutch is F&@ked

[@ScottMcLinden]

Truck was flying

[@SidWalter]

You just maid the thing look like shit with the wheels

[@fullthrottleobsessions]

Really, i actaully like these wheels not a big fan of the tires though

[@guitarzan214]

holy loose slipper. sounds like a dang drone is taking off

[@ntbfw81]

I run over 60 on 2s.

[@fullthrottleobsessions]

Right on brother thats moving for sure especially for 2s

[@ntbfw81]

Hobbywing xerun 4700kv, hobbywing 150a sct. 21 pinion 50 spur locked slipper.

[@braydenstamps8511]

Lol if I hit full throttle on mine right away shit would start flying off. Tires would come off the rim. I would just see dollar signs go everywhere

[@krbassin2465]

u need a brace bar

[@fullthrottleobsessions]

KR Bassin a brace bar on what bud?

[@DB-qm4jx]

Why not just buy a stampede instead. Not being sarcastic. I was just curious why this is such a popular mod. I like what everyone does with these but this seems ..

[@fullthrottleobsessions]

The stampede in my opinion is just too top heavy even though this truck has stampede tires and wheels it still has a low center of gravity which makes it perfect for just about any type of track or terrain you want to run on

[@james654100]

Your slipper clutch in this video is waaaay to loose. You can hear it plain as day. That explains the overheating clutch !!

[@fullthrottleobsessions]

Oh yah it was roasted lol

[@haydos135]

Do it on concrete

[@fullthrottleobsessions]

Ima be filming with this truck soon, i think i will do it on concrete this time

[@Hoodie2103]

Rip slipper clutch

[@fullthrottleobsessions]

It was toast bud, but no worrys we have a heavy duty slipper in this beast now

[@jameskresse2643]

If you put smaller tires on you’ll go faster.

[@fullthrottleobsessions]

It takes way longer to get up to speed with the small tires they just spin in the dirt on 3s which makes it way harder control aswell

[@marianoblanco2981]

Nope

[@mikehagquist5198]

Body is to high. Looks goofy. Like a Walmart rc. I have the same shell. It is the best body for the slash besides the 2017 raptor

[@JoseGonzalez-do5jx]

Get your sliper clutch thight

[@fullthrottleobsessions]

I ended up putting a heavier slipper in this truck to better handle the 2.8s

[@tobydyes]

Should have did it on the road. Not the dirt.

[@Revon-Feuer]

Traxxas is not tuff enough like the slash

[@fullthrottleobsessions]

The slash is made buy traxxas bud

[@Revon-Feuer]

@@fullthrottleobsessions umm... Can you read i said traxxas is cheap plastic and the slash IS made by traxxas and dont ca me "bud" >:( 😡

[@ryanhollier6055]

Your slipper clutch is hella lose

[@chrsmcwtrs]

Somethings not right here... 2s and 3s its not going to do anything for speed that's storage capacity... The higher up in discharge the faster its going to go... How did your 25c beat a 50c battery... That's it is going to be nutts fast...

[@chrsmcwtrs]

Hold on my bad.. That 50c 2 cell is a 7.4volt??? That would explain it.. The 3s 11.1 25c is going to be faster.. I understand... Nice video

[@sikrandall83]

chrsmcwtrs 2s is 7.4 volt always, 3s is 11.1 volt always. 2s equals 2 3.7 volt cells. 3s equals 3 3.7 volt cells. There is a huge difference between the cell count in speed

[@LordableRBLX]

Poor clutch

[@fullthrottleobsessions]

Oh it was RIP to that clutch bud, no worries I have a heavier clutch set up in it now