Treadmill Speed Sensor Error | No Speed Signal

How to test a treadmill speed sensor with a No Speed Signal on a Landice L7.
Please like our videos if you find them beneficial and don't forget to subscribe to our channel for more on fitness equipment techie tips.
www.rmsfitness.com

[@wnhulsey3]

This is TREMENDOUS! Expertly done. The dialogue format is excellent. Thanks so much!

[@JorgeTorres-lj6dt]

i'm having trouble with my own treadmill and this help out a lot thanks

[@juliocampos5879]

My left ear 👂 loved this

[@wishiknew1974]

NOTE: This product works exactly as described. kzbin.infoUgkxguEIMc_Qwab-3QMTpF6jaRL80hiOOsIN It originally earned a four-star review due to a minor defect (see below). However, the manufacturer's customer service rep (Lita) went above and beyond the call of duty and deserves five stars now. I wish I could give even more!I purchased this item which arrived quickly. Assembly instructions were easy to follow. There was only one problem: One bolt did not screw into the hole properly. I called the company. Their customer service rep (Lita) was terrific! She took all my information and submitted a request to replace the defective part. I'm hoping to finish assembly and start using this treadmill soon. (Fingers crossed...)FOLLOW UP: Lita called back to inform me that the company will send a replacement part AND a technician(!!) to install it properly. AMAZING CUSTOMER SERVICE!! Thank you!!

[@rogeriopereira6547]

congratulations on the excellent video. However, I have a problem with the Woodway 4Front with the loss of signal error. Is it the same sensor?

[@yavuzalbayrak2003]

Thank yo very much.Same problem i have on my treadmill. Unfortunately, the service is very difficult to understand. service is very insufficient. I changed the sensor for 10 dollars and the problem was solved.

[@RS-dq9pn]

Confused..what was the issue with this treamill never gave a final diagnosis and fix. If i missed it please state time on video so i cn review. Thx

[@JoseOrellana-qd4df]

Help! Do you sell the speed sensor!?

[@jimihendrix8535]

What was the issue with your treadmills then? You did a nice job initially but never finished what the problem was. If you were demonstrating this on a treadmill that has no problems, then please say so.

[@s.n.7791]

my treadmill stopped working last night. First, it started slowing down randomly, then it stopped for good and an error code11 came on. I removed the cover to see the motor and the electric board and then I moved the belt manually and I could see one green LED light turning on and off according to the speed of the spinning speed sensor. Does this mean that the speed sensor is ok?

[@Cjewell0422]

What can cause a speed sensor to fail? Just replaced the one on my old True 500 treadmill & it's already giving me the same error / no speed sensor. It's only been around 3 months since I replaced it.

[@ahmedboudi1808]

Thank you very much...it's the Error E03

[@colassolorzano6353]

Hello..where i can buy the speed sensor for tx 5.0 rc by sportcraft

[@jeffkaiche1224]

Hey Guys thanx for the video very helpful, any chance I could get some advise of link to a video on a *waxer unplugged error* cheers

[@techietipsbyrmsfitness8980]

Hey Jeff, what kind of unit? Could we simply disengage the waxer in the settings? Talk soon.

[@mikemcghee2005]

I have a Gold's Gym 430i treadmill and when I step on the walking belt it stops. With the cover off I can see that the motor pulley and belt stops too with no movement. When I take my foot off everything starts back. The walking belt does not seem to be loose. I can see a red light always flashing on the board. Also the incline is not working but when I press a number I can see a yellow light come on and then go off. This all happened after I replaced motor and board then lubricant. Can you please help.😥 Thanks

[@techietipsbyrmsfitness8980]

Hi Mike, the red light indicates a speed signal. Did you calibrate the machine? It should have had directions with the lower board for calibration. Let me know - BDecky

[@bobbg9041]

Using a treadmill motor and controller for a power tool and not a treadmill can the safety feature be shut off? This unit will never be a treadmill, it's going on a drill press, wood working lathe, or 1" belt sander. I don't want to deal with mounting a magnet on the unit to keep the voltage pulse showing the speed controller board it's moving. You stated the DC circut is 3 to 5 vdc I'll assume red is positive pole and white is the negtive pole. I could build a pulse generator to supply the feedback but I don't think it's nessary the unit has it built in comming from the control panel. That's probably a 12volt DC circut I could step down with a 570 ohm resistor or a 1k ohm resistor. 1k ohm will drop 12 vdc to about 3 volts, 570 ohm I'm not sure but I think it's about 5 volts DC. To 6 volts DC it should be close enough. I don't have the boards layout to figure it out, but I think treadmills are similar.

[@djlovenlive3920]

Wondering if you could advise... My Fuel 63 treadmill belt was slipping as I ran, so I disconnected the machine and adjusted the belt as instructed in the manual... However when I was about 40 minutes into my run the treadmill just started speeding up on its own to maximum velocity and only stopped when I removed the safety key... Since then every time I switch the treadmill on I just goes straight to full velocity without me touching any buttons, then cuts out and it just repeats the same sequence (Speeding up and cutting of and so on) until I disconnect the key!!! Absolutely baffling!!! Can you help ??

[@techietipsbyrmsfitness8980]

Sorry for the delay. That does sound like a bad motor controller. You may also want to check the condition of the walking belt (amp draw)

[@benbuckler5375]

Any idea what 'SE' means on the screen when you turn it on? I get this message on the screen when I turn the treadmill on then it will go to 12km/h and get stuck on that speed.

[@techietipsbyrmsfitness8980]

I would assume, speed error. What kind of treadmill?

[@benbuckler5375]

@@techietipsbyrmsfitness8980 NordicTrack 15.0

[@techietipsbyrmsfitness8980]

@@benbuckler5375 Most cost effective is to start with the speed sensor. Worse case would be the motor controller.

[@sirvaant]

I have a proform 625 that worked great for a while now when you power it on the digital display numbers just blink and scramble and the treadmill won't move is there anyone who might have the answer to this issue.

[@techietipsbyrmsfitness8980]

Does the incline work?

[@sirvaant]

@@techietipsbyrmsfitness8980 No when you touch the panel nothing works

[@techietipsbyrmsfitness8980]

@@sirvaant the no response would indicate a console issue. I would be concerned with the cost if that is the case.

[@sirvaant]

@@techietipsbyrmsfitness8980 k thanks

[@sirvaant]

Could there by any chance be anything wrong with the power supply board that could be causing the console to blink rapidly?

[@rajkumargheseawan4104]

Hi I am experiencing my treadmill is running at a slow speed 0.6 and when adjust to a higher speed the belt do not move faster any suggestions

[@techietipsbyrmsfitness8980]

Have you tried calibrating?

[@اكرمحسينعلي.أحياءق]

Do you know what do you mean E-stop in cybex treadmill??

[@techietipsbyrmsfitness8980]

Are getting an error that says E stop?

[@tonyw60334]

My treadmill motor works - it speeds up but as soon as I step on it the belt slows right down and stops. Power off and restart it again gets going and I can adjust the speed but again once I step in the belt it slows down and stops. I have tried adjusting the sensor and lubricated under the belt but problem persists - any ideas?

[@techietipsbyrmsfitness8980]

This is typical of a worn walking belt. Have you lubricated or replaced the walking belt recently?

[@JokerdanFF]

Good knowledge

[@chantalkamenge3062]

My treadmill Trimline T340 just stopped. It gives me an error message: L5. Do you know what does that mean? Thank

[@tedygood7378]

My treadmill is just fitnes have E1 error how I can fixed tell me please

[@fabianangel8612]

my treadmill wont run the motor is working i did test it. the display is also working. what am i missing?

[@boat73jr]

Same. Did you figure it out?

[@femifayemi7589]

Where can I get a speed sensor, please

[@dookiekoukiS14]

LIveStrong 13. When I turn it on it beeps but no movement and I get the Error Code E1. The other functions work but the motor won’t turn on.

[@techietipsbyrmsfitness8980]

Sorry we are late on this reply. It would seem it is a lower board.

[@qmays34]

My treadmill comes on but when I match the start button nothing moves nor does the incline or any of the bottom button everything up top works I test the motor and put power to it and it moves but it won't move when the board is hooked

[@techietipsbyrmsfitness8980]

99% it is the lower board. If the unit hasn't been recently moved, then that should be the issue.

[@soudhamad9465]

@@techietipsbyrmsfitness8980 how to check the lower board in order the treadmill to move

[@billmullis532]

I have a ProForm treadmill. There's no slippage in the belt. unit does not respond to any speed selection. speed selector does not work at all. it's basically stuck on the lowest speed selection.

[@krsb9030]

Who now is error E26? For Spirit CT900 treadmill, or where i can found information?

[@subhashreemahanta5520]

kindly hlep me how to know the problem of error 3

[@franklinramire161970]

sensor.

[@franklinramire161970]

change opto-coupling or cleaning

[@gmxfitnessknowledge]

My treadmill problem Erore 12 why coming in treadmill.

[@gmxfitnessknowledge]

SUBHASHREE MAHANTA Error 3 Rolor sencer cheak and cable lose for

[@lusher00]

What’s the dust cover for?😂

[@wellingtoncassiano5756]

Eu tenho um esteira com elevação alta como conserto isso, veja no meu canal

[@kimberleytodd4200]

How to fix EO code

[@Pete7554htp]

What's the dust cover for? Dumbest question ever 😅

[@darleenishee]

my speeds up

[@mariyahareem2280]

I want a help. my trademill is being stop by its self after some second. can u tell what's the prob. ( its emergency stopper has been misplaced, I put a magnet instead)

[@jerryadkins5058]

Ms Hareem b

[@AtulKumar-ln3kl]

My treadmill is E12 coming i know But why coming E12

[@boat73jr]

I don't get any movement

[@techietipsbyrmsfitness8980]

Lower board or motor brushes. First items to check.

[@franklinramire161970]

change optocoupled

[@alighawi1729]

Error(1)plez

[@kzstv5667]

What is error E2.kindly told how to remove it.

[@techietipsbyrmsfitness8980]

What kind of treadmill do you have?

[@chitaearcete8579]

@@techietipsbyrmsfitness8980 e7 error kemilng

[@nikiheart6779]

This is called a photointerupter.

[@azwimarole6718]

Trade mill trojan spacer 100 error L5

[@azwimarole6718]

Treadmill trojan spacer 100 indicates L5 error .the treadmill forms not run .what could be problematic

[@eyesopen6110]

The volume is super low..