Triumph TT Legend, Smart New Engine Paint !

  Рет қаралды 35,415

Delboy's Garage

Delboy's Garage

Күн бұрын

Пікірлер: 279
@shanekfalcon
@shanekfalcon 4 жыл бұрын
This is for me, the most interesting Delboy series yet. Thank you.
@chasbrown352
@chasbrown352 3 жыл бұрын
Brilliant video. I intend on doing this with my 04 Bonneville. You have saved me a lot of money.
@joepie221
@joepie221 4 жыл бұрын
Looking good Del. Those are the type of hours people will look right past when they check out this bike, but it's very satisfying when its all done. I also hope you put some anti seize compound on those exhaust studs. Ya never know if you'll need it. Ride safe, stay well.
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Hi Joe, always great to hear from you... I have your tiny cocktail glass video still to watch (silly busy week!)... the studs are only thrown in with fingers for now (for the main reason that I'll know where to find them in the future!)... but will double nut them and torque them in, was thinking of using Wurth AL1100, which is an alu-ease or alu-slip, and apparently more appropriate than copper between steel and aluminium, and it has the same melting point as copper. Take care and have a fabulous week, watch out for those spiders!
@CookingwithChefDai
@CookingwithChefDai 4 жыл бұрын
My God that was satisfying to watch. Nothing quite like pulling off the protective tape to see all the end product unravel before your eyes. mmm Excellent camera work and editing as always my friend. Top notch. lots of love to Penny. Take care mate, Dai
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Thank you Chef, that's very kind of you...! Easy stuff really, as I've said before, I'd swop all my bike skills for half of yours... specially those insane knife skills! Take care and have a wonderful week, guard the family and keep safe, love D&Pxx
@CookingwithChefDai
@CookingwithChefDai 4 жыл бұрын
Delboy's Garage that’s funny because in my eyes, you’re the man with the skills. Knife skills are simple muscle memory, whereas your knowledge and experience comes from years of tinkering, research, learning, and trial and error. Take care
@garybrown4854
@garybrown4854 3 жыл бұрын
I put that paint can in warm water between coats , or just before I use it , you made a great job of that .
@daiman56
@daiman56 4 жыл бұрын
Really enjoyed this one, above my skill set but I enjoy watching an expert like you make these repairs/refurbishments look easy.
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Glad you enjoyed it Davie!
@tomsnow1681
@tomsnow1681 4 жыл бұрын
It's a shame you didn't make this video earlier, I just painted the whole engine of my Bandit 600. I used Simonize as well but the Engin Enamel instead of Tough one. I was not sure the Tough paint will be heat resistant enough. Black Enamel comes comes only as gloss or matt so I settled for matt. On all the cover including rocker, i used the Tough Satin through, it looks great. Now i have to cut out all the cover gaskets and will start putting the bike togethers
@manoffunk
@manoffunk 4 жыл бұрын
Wow what a difference! Super job sir! Can't wait to see what you do with the exhaust.
@paulharast1958
@paulharast1958 4 жыл бұрын
Awesome And Beautiful Work 👏👏👏 You Del & Penny Ride Safely And Stay Healthy And Have A Wonderful Week.
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Thank you Paul, great to hear from you Sir, wishing you the very same, let's hope we can all get back to normal before the summer's out, ride safe, D&Px
@garethburningham9467
@garethburningham9467 4 жыл бұрын
Great job mate, the engine looks 100% better painted. Enjoying the series so far as I'm a bit of a Triumph fan boy... 👍
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Glad you like the videos mate, plenty more to come!
@Broken_Arrow58
@Broken_Arrow58 4 жыл бұрын
Thumbs up for each of the videos in this project series. Looking forward to the next one. I understand as you apparently do that being organized and tidy makes things easier. Owned a 2011 Bonnie SE for a while so have a soft spot for Triumphs.
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Cool, thanks for the support mate, glad you're enjoying it.
@cyberjack
@cyberjack 4 жыл бұрын
I didn't realize how bad paint was until you sanded it ...looks great now Dell ..and am sure exhaust will look amazing.too ..can't wait
@VladimirYosifov
@VladimirYosifov 4 жыл бұрын
I like how it turned out. Hope that paint sticks to the aluminium block well with no primer. Paint look thick enough to withstand outside conditions. Good luck and keep us posted :)
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Used it for a long time, it's designed specifically to use on bare metal!
@Volvi373
@Volvi373 4 жыл бұрын
Great job that few amongst us would ever bother trying. The bikes next owner would be getting a bonus from this job, securing the next few decades. Onya bro.
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Thanks Volvi, good to hear from you brother.. yeah, while its up on the lift and the knackered old exhaust is off, why not clean up the 20 years of decay.. Have a good week mate... Del.
@EchoSevenNine
@EchoSevenNine 4 жыл бұрын
Perfect timing, Del. I'll be doing this myself very soon. My ZZR needs fork seals so while the front end is out I might as well drop the rad and downpipes and get it done.
@mohammadrasoulfard-habibi3066
@mohammadrasoulfard-habibi3066 4 жыл бұрын
You legend, I have to do this to my r6 2003 race bike. Thanks for sharing 👍.
@morrow.m
@morrow.m 4 жыл бұрын
Love these triumphs! Enjoying this project!!! Those stud bolts coming loose last video was nerve-racking!
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Glad you're enjoying it mate, any project is exciting and and adventure to enjoy...
@morrow.m
@morrow.m 4 жыл бұрын
@@Moonfleet41 No doubt. They’re all exciting but there’s a special place in my heart for the Triumphs and the Harleys..
@Moonfleet41
@Moonfleet41 4 жыл бұрын
@@morrow.m Kindred spirits there then mate.
@daveeccles7957
@daveeccles7957 4 жыл бұрын
Hiya Del don't always comment on your vids but watch and enjoy them all. Really liking this project 👍
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Cheers Dave, great to have you aboard mate, really appreciate your support!
@VadersDarkside
@VadersDarkside 4 жыл бұрын
Lovely job!!! Watching that knackered paint come off was so satisfying. Can't wait to see the plans for the exhaust and I bet you are well up for trying something new! 😉
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Sure thing mate, almost as satisfying as peeling a scab (only boys would understand that of course, as Penny's just given me 'that look'!)... still nervous about the exhaust but it's gonna be a great challenge.
@lillb33f
@lillb33f 4 жыл бұрын
Nice work del! I think the exhaust sounds like something you will refuse to give up on and it Will be amazing! And its Always healty to challenge yourself and learn.
@Moonfleet41
@Moonfleet41 4 жыл бұрын
That's the plan my friend, I appreciate your faith.
@nickbishop6784
@nickbishop6784 4 жыл бұрын
Very smart finish Del. I've never owned a fully faired bike or even a liquid cooled one either, so I know how cacked on that stuff can get. Cheers Nick Australia
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Thanks Nick, this was a gift from our wonderful salted roads in glorious damp Blighty! Nothing lasts that long over here... I'd swop our road salt for your red dust any day!!
@ProfJono
@ProfJono 4 жыл бұрын
I've just used Simoniz Matt Black Engine Enamel on my Bandit engine, and it feels powdery. I've got a can of Satin Black Tough Paint on the shelf, and after seeing you use it on your engine, I'm thinking about going over mine with it.
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Answered your comment over on Facebook mate!
@Gambo916
@Gambo916 4 жыл бұрын
It's like picking scabs off @5.35......Sooooooo satisfying!!!!
@marshallcollins8634
@marshallcollins8634 4 жыл бұрын
Danm that is a lot of work. The dental thing didn't bother me ,I've had dentures for 40 years. But that poor compressor. I'll bet it hates you for making it work so hard. When I take my header off for any reason I use HAND BALLS to plus exhaust ports. I have a 77 kz650 . Never tried it without the studs though, might not work as well without them. But they are pretty cheap, they are reusable and you don't have to worry about water intrusion. As always great video Thanks
@confidential3232
@confidential3232 2 жыл бұрын
I used the gloss black on engine case super glossy hope it stays like it will use matt for engine thanks
@garya3056
@garya3056 4 жыл бұрын
Nice vid, Del. A big old compressor is on my wish list. Oh yeah and some proper pneumatic tools! Still in a heatwave here but still alive! Stay well both of you! 🏍👍🏍
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Cheers mate, I put off buying a proper compressor for many years, and the need for it never goes away, and the reasons to buy it get more and more logical, once you finally do, you wonder how you lived without it, a world of air tools opens up to you and life gets easier! Stay chilled and cool there both, move slow and keep in the shade... stay well, D&Px
@garya3056
@garya3056 4 жыл бұрын
Delboy's Garage I’m sure, Del! What a nice addition to the garage... thx, and take care. 😎
@superglide6680
@superglide6680 4 жыл бұрын
When cleaning a nut, run it down a bolt. Makes it far easier to hold and apply pressure.
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Great idea!
@gerry9359
@gerry9359 4 жыл бұрын
Looks neat and tidy and great job done as always Del 👍. As always keep safe and ride safe to the pair of you .
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Thanks, will do, you too, hope you're recovering well!
@anthonylee-fzs
@anthonylee-fzs 4 жыл бұрын
This brings back memories, I did a complete gpz750 engine in this manner ..several steel wheels later and a lick of paint got it looking great 👍
@andydawson2070
@andydawson2070 4 жыл бұрын
Hi Del, I was surprised just how bad that engine was, filthy thing. Look much better now and no doubt even better once the pain has cured. Loving the idea with the exhaust. Good luck my friend.
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Hey Andy, good to hear from you, thanks for your kind words mate, it wasn't hard to make an improvement on that aye? Thankfully the rest of it isn't nearly so bad (well, the wheels are, but can deal with that!).
@geoffozevans4500
@geoffozevans4500 4 жыл бұрын
Top job , that air powered Dremel is a great little tool, all the best to you both x👍
@ShedTorque46
@ShedTorque46 4 жыл бұрын
Don't worry about Stainless bolts in Aluminium. Use Tef Gel or something similar. Just uploaded a video all about it. Take a look. 🏴󠁧󠁢󠁷󠁬󠁳󠁿🏍️
@beozzie690
@beozzie690 4 жыл бұрын
Have been always amazed at the results you get with a rattle can.. top shelf mate.
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Thanks buddy, just gotta take your time and get it thick enough (but not too thick!).
@beozzie690
@beozzie690 4 жыл бұрын
Delboy's Garage cheers mate, but I’m completely rubbish with them. Lol
@trig
@trig 4 жыл бұрын
I have a black engined triumph and the engine paint is intact but dull. Is there a cleaning agent or spray that will get me back to matt black?
@pezb1
@pezb1 4 жыл бұрын
I use harley engine brightner . Just spray on works a treat .....
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Harley Engine Brightener like Pez says, and also H-D Denim Paint cleaner, or at a push, even dashboard silicone, but it does dull away quite quickly and GT85 works quite well to make a black engine look really nice.
@trig
@trig 4 жыл бұрын
@@pezb1 Cheerz, I shall give that a bash.
@trig
@trig 4 жыл бұрын
@@Moonfleet41 Cheerz, I shall give them all a try.
@andyjrichie6709
@andyjrichie6709 4 жыл бұрын
From shabby to looking good 😉 if it's worth doing it right and it looks 💯 times better. Great video sir. Thanks Andy
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Thanks 👍
@Ricardo533155
@Ricardo533155 4 жыл бұрын
Nice work Del. Very satisfying to see that old paint come off.
@DonHutchins
@DonHutchins 4 жыл бұрын
Looking good Del! I'm looking forward to seeing what you have planned for the exhaust. I wish that Simoniz paint was readily available here in the USA; I gather it's quite common in the UK, but sadly not here.
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Hi Donald, Good to hear from you, i hear form a few guys over there then Simoniz don't sell paint over there, but for this which is just a stone chip style paint, have a look at the Rustoleum range, i think they do a few options that do much the same thing..!!
@clivegreenall309
@clivegreenall309 4 жыл бұрын
Preparation. Preparation. Preparation. Thanks for sharing Dell. It's going to look stunning. I'm looking forward to seeing the exhaust fabrication. Regards from S Africa Clive
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Thank you Clive, it's a daunting task, but I can't wait to get started!
@MrOutOfTheVoid
@MrOutOfTheVoid 4 жыл бұрын
Looking forward to the exhaust build. Can't wait to see what challenges it presents and more importantly, how you overcome them!
@Moonfleet41
@Moonfleet41 4 жыл бұрын
You and me both mate! It'll be new ground for me...
@frankt.3891
@frankt.3891 4 жыл бұрын
As a friend of mine would say when I tell him how dirty his bike is : "Ahí no se mira, hombre"... You don't look there, man. Fantastic work!!!
@coloradokid1346
@coloradokid1346 4 жыл бұрын
Hey Del I haven't been around to watch your videos lately. Catching up to them now. Looks great as always Del.
@Moonfleet41
@Moonfleet41 4 жыл бұрын
No worries, good to hear from you, hope life is good... have a great week and ride safe!
@TheBazza2556
@TheBazza2556 4 жыл бұрын
that looks well tidy mate, looking forward to the exhaust fit, nice vid, stay safe
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Thanks, you too!
@peterihoy4908
@peterihoy4908 4 жыл бұрын
'Can't recommend Tough Black enough, fantastic product.
@springy-2112
@springy-2112 4 жыл бұрын
sweet , not looking forward to doing mine in winter but getting tank and panels resprayed 2k so a good time to do engine paint . Really enjoy watching your endeavours as always ..Peace and love brother 👍🏻☮❤ 4.5 nights to go yipee then 8 days off yeeeha!
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Ayup brother Springy, good to hear from you... sounds like you're looking forward to some much needed time off! Good luck with the paint too, I know you'll make it work... P&L D&Px
@springy-2112
@springy-2112 4 жыл бұрын
@@Moonfleet41 yes it'll be a good project for deepest winter ..may take engine out for ease of access then probably repaint frame as it same colour as the tins then powder coat wheels and swinging arm and peg hangers and and and !!!! oops ! Thanks for all your kind support will endeavour to get some new tunes recorded too sometime ...so many plans !! Peace love and hugs to you both 👍🏻☮❤
@adrianbegbie1556
@adrianbegbie1556 4 жыл бұрын
Looks nice.. standard of finish is high.. 👌... look forward to the exhaust build.. cheers..
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Thanks 👍
@TILL1PT
@TILL1PT 4 жыл бұрын
I use that paint on all my bikes, it usually dries to a satin finish quite fast
@DennisvanPuttenNL
@DennisvanPuttenNL 2 жыл бұрын
Great video! Super job in removing paint. Could you tell me what the add on piece is called? I am looking for the same to clear my engine.
@jaspergrumfuttock
@jaspergrumfuttock 4 жыл бұрын
Nice job young man, pleased to see craftsmanship still exists. I am renovating my stepsons bandit and have just used wrinkle finish heatproof paint on the engine. Looks great and contrasts well with the black gloss on the rest of the bike. Thanks for the vid, stay safe, all the best.
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Hi there, that sounds like a good project and I can imagine that came out pretty well... good luck with it, and thanks for your support.
@blade-x
@blade-x 4 жыл бұрын
Every day i look and i enjoy you beautiful nice work I am desame guy i want it do good , i dont like half work,, good work Del 👍🏼👍🏼👍🏼
@tonymartin3780
@tonymartin3780 4 жыл бұрын
My Teeth hurt now😂 you have given that little red and yellow driver some stick 😀 .bikes coming on nicely
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Cheers buddy, someone sent me a boxful, so I have to use them, they're a genuine multi-purpose tool! Hope you've been playing out on the Enfield, I expect 1000 miles by Sunday, then you can rip all the sad bits off and start TEC-ing it!
@rsbharley4766
@rsbharley4766 4 жыл бұрын
Nice job Del, always better when you have the right tools. Looking forward to the exhaust build mate, you will just have to learn to tig weld lol. Penny and you have a good week. Cheers
@businessman953
@businessman953 4 жыл бұрын
Man i like how you keep everything organized when I’m working on my garage damn i live a miss all around lol
@willmc11
@willmc11 4 жыл бұрын
If your gonna tig weld stainless I highly recommend using a gas lens kit even the cheap eBay kits are fine, but if you really wanna make a good job the fupa12 is what you need, it’ll change your welding all together and get you the pretty finish you see on all the expensive stuff
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Thanks for the heads up mate, I'll add it to the wish list!
@MikeButler05
@MikeButler05 4 жыл бұрын
i enjoyed that nearly as much as i think you did , Glints back in your eyes ,
@geraldgallagher825
@geraldgallagher825 4 жыл бұрын
Having just finished a cosmetic restoration on a 20yr old j1 zx6r I'm watching you and thinking about what I've just done leaving me asking the question of all here yourself included " why do we all work on old bikes so often and with such passion ? " Answers on a postcard please to The Mechanics Asylum Po box 20 Looneyland
@jonathangriffiths2499
@jonathangriffiths2499 4 жыл бұрын
Ask yourself would you still be doing that if you won a billion on the lottery ?
@geraldgallagher825
@geraldgallagher825 4 жыл бұрын
@@jonathangriffiths2499 full time m8 full time lol 👍
@jonathangriffiths2499
@jonathangriffiths2499 4 жыл бұрын
Gerald Gallagher damn straight fella 👍
@Moonfleet41
@Moonfleet41 4 жыл бұрын
... me too, but just with a collection like Jay Leno... and they'd all be in bits!
@geraldgallagher825
@geraldgallagher825 4 жыл бұрын
@@jonathangriffiths2499 right now I'm at another j1 leaking around rocker cover with new gasket in place still leaking!!!! " it wilny defeat me lol " 👍🤣
@davephilpott6569
@davephilpott6569 4 жыл бұрын
Don't forget to copper slip the studs. It might prevent a replay of your nightmare in another 20 years, if we are still allowed to put petrol in. Keep up the good work👍.
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Sure thing mate, there will be something there to stop them sticking for sure!
@banditnev
@banditnev 4 жыл бұрын
I have ridden one of them I have to say it was one of the best bikes I have test rode. Would I own one heck yeah. But there far and few between here.
@richardhartley7094
@richardhartley7094 4 жыл бұрын
excellent paint use it a lot at work do many colours nice job👍
@illinformed
@illinformed 4 жыл бұрын
Yessss Del! - Been dreaming of making my own high exhaust for my GSX750 for ages! I'm buzzing to see how you get on :D :D :D
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Cheers mate, no pressure then lol!
@loddude5706
@loddude5706 4 жыл бұрын
Yes! A three into one 'Brooklands Can'. (one inch thick, two feet tall, & loud 'Moggie 1000 fruity-trumpets' on the overrun) Absolute doddle - Buy Penny a BIG Toblerone, pantograph up some card templates, & hit the chip-shop with tinsnips : ) x
@TheSnuggs01
@TheSnuggs01 4 жыл бұрын
Del, thanks I find your videos most entertaining, please keep them coming, I cannot wait for the next Wasteland episode.
@fantomrides
@fantomrides 4 жыл бұрын
Good stuff with the welding fella, about to take a college course for tig. 🙏👍
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Go for it mate, you'll be better qualified than I am for sure... on my bucket list!
@popscyclep8084
@popscyclep8084 4 жыл бұрын
Awesome as always! That will be a ‘Legendary ‘ underbelly! Pardon the pun hehe As well love the witty terminology ‘bracket thingy’.
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Glad you enjoyed it!
@popscyclep8084
@popscyclep8084 4 жыл бұрын
Delboy's Garage Yup:-)
@renolizing
@renolizing 4 жыл бұрын
why did you tighten up those two nuts, if the paint was still wet?
@worzelgummidge3617
@worzelgummidge3617 4 жыл бұрын
My nan told him too
@dhc4ever
@dhc4ever 4 жыл бұрын
What a sod of a job, nice work. Please use a high temp anti seize on those studs, aluminium, heat cycles and stainless steel can and do stick together. Anti seize will orevent that. Gloves are a good idea with degreasers, but youre a big boy and know this anyway, I just hope you dont end up with the hands i have, 40 plus years of being covered in oil,grease and mank and until realitively recently no realy effective gloves that protect you that you can actually work in. Please sent the name of the beer you were drinking when you came up with the idea of the busa.... Love your work Cheers
@Moonfleet41
@Moonfleet41 4 жыл бұрын
The studs are only finger spun for now, so I know where to find them... they will be double nutted and torqued in place and indeed I shall use either some AL1100 or at the very least some copper anti-seize... thanks for your support mate.
@jedigeekbiker
@jedigeekbiker 3 жыл бұрын
The cleaning part was like therapy, awesome.. does warming the spray can help it flow?
@Moonfleet41
@Moonfleet41 3 жыл бұрын
Yes it does mate, simple heat expansion of the gases inside the can force down on the paint liquid a bit harder, and gives you a finer atomization, a great way to get every drop of paint and the best value for money!
@jedigeekbiker
@jedigeekbiker 3 жыл бұрын
@@Moonfleet41 perfect thanks.
@kevinhancock4064
@kevinhancock4064 Жыл бұрын
Jice as usual ... studs arevthe way to go fir exhausts ..im using said studs given ive just had to rebuild my gsx 14 abive crack case ..mission all over heafer studs ..engine is in tv's to go in and rig rest if it up ....been to long lol
@johnmortison5763
@johnmortison5763 4 жыл бұрын
It might have been easier to pull the engine and bead blast it. Then you could paint the whole thing.
@gavinhughes8623
@gavinhughes8623 4 жыл бұрын
Wow now well done man that's looks a million times better and your not even going to see it 👍👍 I have a query I've had the exhaust stud out I snapped off with the new ones what would you recommend putting them in with eg with some sort of lub like copper slip or put them in dry no lub and what seconds brain picker what would you recommend the peg and nut be made of 🤔. Hope you and penny are good man 👍
@Moonfleet41
@Moonfleet41 4 жыл бұрын
If you're fitting a new exhaust stud mate, then some anti-seize compound is a good idea, copper is fine and works ok, or you could find an alu-slip product instead... but something is certainly better than nothing that's for sure!
@gavinhughes8623
@gavinhughes8623 4 жыл бұрын
@@Moonfleet41 thanks del I have seen copper exhaust studs and nuts recon they would be any good ?
@madmarkuk1
@madmarkuk1 4 жыл бұрын
Cant beat a freshly painted engine ;-) great job as always
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Thanks 👍
@tonygriffiths2485
@tonygriffiths2485 4 жыл бұрын
Cracking job there. Looking forward to the thingy. Thanks :)
@Moonfleet41
@Moonfleet41 4 жыл бұрын
You and me both mate!
@gilesbristow123
@gilesbristow123 4 жыл бұрын
My son made his own exhaust for his Land Rover Trialer using pre made bends and a mig, but it's not as on show as it is on a bike but looking forward to the next episode
@davidcort2857
@davidcort2857 4 жыл бұрын
Hi Del, could the same paint and process be done on my 600 Bandit ?
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Hi David.. well it worked here, not sure how the heat will change the colour around the ports later, maybe turn ti a little grey at the hottest spot.. but ive used this paint a dozen times in many different applications and it's really durable and tough.
@davidcort2857
@davidcort2857 4 жыл бұрын
@@Moonfleet41 Thanks Del.
@davidcort2857
@davidcort2857 4 жыл бұрын
@@Moonfleet41 Do you think there is a more robust paint out there ?
@Moonfleet41
@Moonfleet41 4 жыл бұрын
@@davidcort2857 I wouldn't know mate, the world of paint products is huge and wide, this has never let me down, so ive never looked for more i guess..!
@davidcort2857
@davidcort2857 4 жыл бұрын
@@Moonfleet41 Marvellous thanks, sorry to bother you on a Sunday.
@K1LLA_KING_KONG
@K1LLA_KING_KONG 4 жыл бұрын
pro tip: use as wire wheel brush on an angle grinder and die grinder to strip paint, rust and oxidation down to bare metal super pro tip: use paint stripper first
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Chemical strippers can be your worst nightmare, one tiny scrap of it left on (IN) the surface and it will come back to haunt you by wrecking the new paint.
@JosephMask
@JosephMask 4 жыл бұрын
El video más satisfactorio que he visto en tu canal, saludos bro
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Gracias por tus amables palabras hermano, ¡viaja seguro y disfruta tu semana!
@martindavies8326
@martindavies8326 4 жыл бұрын
That’s looking a lot better now, I know how Nerve wracking it can be removing Stubborn bolts, and the time it takes to put it right if one snaps off 🤬😡 keep up the good work. Cheers Del ⚙️🔩🔧👍
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Thanks Martin! 👍
@jasons9417
@jasons9417 4 жыл бұрын
Hi Del great work as always. Can I ask, you mentioned in an earlier video about blacking out a bike engine with it still in the frame. Which video is that in? Cheers Jase
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Hi Jase, yeah I did, it was in the streetfighter ZX7R project, can't put my finger on the video right now, but that's where you'll find it, it'll be titled two guide the viewer, so should be pretty easy to find in the playlist!
@jasons9417
@jasons9417 4 жыл бұрын
Delboy's Garage - that’s great Del I’ll take a look, its appreciated. Cracking channel chap 👍 cheers Jase
@stevie5141
@stevie5141 4 жыл бұрын
Nice job👍🏻I even like the glossy look🤣👍🏻
@iainmcconnell6727
@iainmcconnell6727 Жыл бұрын
Hi Del, currently restoring a Honda Vtr 1000 firestorm. I need to paint the engine and was just wondering what your thoughts are on painting the whole engine with the Tough Paint? I've seen you repaint another engine using the Simonez Engine Paint so just looking to see if you have noticed any difference between the two? Thanks
@Moonfleet41
@Moonfleet41 Жыл бұрын
Hi Iain, I've found over the years that engines don't get hot enough to burn Tough Paint, just let is cure fully for a fair few days and then fire it up and let it idle till it warms up and the fan kicks in, then switch it off and let it cool right down, this seems to cure the paint just fine and then it lasts really well... the only place it may be vulnerable is round the exhaust manifold area, but personally I've never even seen it discolour on the bikes I've done, and that includes air cooled Harleys... full degreasing the metal is really important though, even perhaps, roast off the engine metal surface with a blow torch gently before you paint in order to vapourise any contaminants!
@iainmcconnell6727
@iainmcconnell6727 Жыл бұрын
@@Moonfleet41 awesome, really appreciate the reply. Will give the Tough Paint a go. Thank you
@Almightyrastus
@Almightyrastus 4 жыл бұрын
3 into 1.....TURBO!!! ;-)
@loddude5706
@loddude5706 4 жыл бұрын
'Stumpy', the blown Leg end . . .
@anupamchauhan4662
@anupamchauhan4662 4 жыл бұрын
Every work need time to creat best ...🇮🇳🇮🇳🙏👍👍👍👍👍
@patrickcollingwood4613
@patrickcollingwood4613 4 жыл бұрын
That’s a really nice job. I’d say will be no problem to u when u start making it up as always u will make a nice job of it that will be another good one ☝️ if u don’t mind me asking what is the name of that air gun and bits That’s really handy thanks Del👍🏻
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Thanks Patrick, appreciate your kind words of support... and yes that's a really handy grinder set, really glad I got it, here's a link for you mate: www.sealey.co.uk/product/5637189239/generation-air-angle-die-grindersander-kit-42pc
@patrickcollingwood4613
@patrickcollingwood4613 4 жыл бұрын
Thank u Del 👍🏻
@marianraicu5339
@marianraicu5339 3 жыл бұрын
I've used Simoniz UHT matt black on my radiator and oil cooler and oil lines. Let's hope it will stand the abuse of the elements on the uk roads
@myz06rocks
@myz06rocks 4 жыл бұрын
awesome update Del! What are some possible equivalent paints to Simoniz Tough Paint? Going to be spraying my frame down (similar to your ZX7 build) during the process of repairing my ZX9 after my gravel excursion at the track and can't find this paint anywhere in Canada.
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Hi mate, good to hear from you... if you can't find the Tough Paint range, I've heard a lot of guys in the USA talk about Rustoleum... and apparently it's quite good, I don't know which exact product you'd need, but the Tough Paint is a durable, stone chip paint for chassis and crash bars, so maybe Rustoleum do something similar??
@myz06rocks
@myz06rocks 4 жыл бұрын
Delboy's Garage thanks as always Del
@ianwoollard9008
@ianwoollard9008 4 жыл бұрын
Just a little bit of Elbow Grease & look what you have achieved! (Well actually it was quite a lot of Elbow Grease). Give yourself a pat on the back Mate. My Suzuki has gone just like that. I'm not looking forward to doing it but it's so rewarding & i reckon just by doing that it's as good as adding £500 GBP to the value.
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Good luck with yours mate, taking good care of a bike will always retain your investment, that's for sure!
@jaimielibbi1
@jaimielibbi1 4 жыл бұрын
Hindel, what size is your compressor, mine always seems to run out of air half way through whatever I’m doing. I think I need to upgrade, any ideas please, advice etc.
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Hi Ian, good to hear from you mate... with compressors, it's not the size of the tank that's the problem by the sound of it, it's the pump itself... all compressors are rated on CFM (cubic feet per minute), literally translated, how much air it can push out when it's running and equally, any air tool or air equipment you use has a rated CFM consumption, basically how much air it needs in order to feed it... so if you're running a compressor that's, say, 10CFM and a tool that needs 12CFM, it'll run out and the tool will slow down and you'll have to wait for it to build back up. With my blast cabinet set up, I researched it needs 12CFM, so bought my compressor that runs 14CFM, so when I'm blasting, it runs for about a minute every 2 mins., and I can blast away and the compressor keeps up! So have a look at what tools you're running and what your CFM is on your compressor (it'll be rated on the spec. plate, which should be a welded plate on the tank), and see if, maybe, you need to upgrade... here's a link from the Sealey range, from low to high, don't worry so much about the tank size, it's the CFM you need to consider.... mine's a 50L tank with a 14CFM motor, same as the motor on the 200L tank, so although it looks like a bigger compressor, it produces the same air pressure, just switches on and off a little more often, and it's compact and fits in my space... have a look mate, see what you reckon: www.sealey.co.uk/search?q=compressor&id=5637150276&sortby=2
@jaimielibbi1
@jaimielibbi1 4 жыл бұрын
@@Moonfleet41 cheers Del
@tomcunningham2106
@tomcunningham2106 4 жыл бұрын
Del, great job, is that the same black paint you used for the fork legs on the Foxdawg?
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Yes it is mate, and the rocker covers and the wheels on the ZX7R and just about anything I've ever painted satin black!
@paulggibbon3057
@paulggibbon3057 Жыл бұрын
Tough black doesn't say anything about being a high temp paint you sure it will hold up?
@Moonfleet41
@Moonfleet41 Жыл бұрын
Proof of the pudding and all that, the bike's still on the road in regular use, and the paint's in fine condition!
@tomaszk6283
@tomaszk6283 4 жыл бұрын
Miło się ciebie ogląda, jesteś debeściak. Pozdrawiam
@kraljrobert
@kraljrobert 3 жыл бұрын
Nice job! I would use matt black spray
@Moonfleet41
@Moonfleet41 3 жыл бұрын
I did buddy.. it was just wet ! dried satin like the rest of the engine later on.
@innes59
@innes59 4 жыл бұрын
Well done what a good job mate I that noticed my triumph tiger exhaust Bolts are really bad pure rust man 😰
@fishaman1968shadow
@fishaman1968shadow 4 жыл бұрын
Very nice Dell.
@bigchappers4402
@bigchappers4402 4 жыл бұрын
Well done del , got to say that looks mint , also can you let me know what make your air ratchet is as that a great idea , I did my wide glide over winter by hand and it took bloody ages lol
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Hi mate, popped a link under the video now since this has become quite a popular little tool, but to save you the time, here's the link anyway: www.sealey.co.uk/product/5637189239/generation-air-angle-die-grindersander-kit-42pc
@bigchappers4402
@bigchappers4402 4 жыл бұрын
Delboy's Garage - cheers del I appreciate it , keep up the good works 😜👍
@istvanvigh2367
@istvanvigh2367 4 жыл бұрын
Very nice job ! Congratulations !
@kennethhume8628
@kennethhume8628 4 жыл бұрын
Unbelievable transformation , excellent series .
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Many thanks!
@clivejones7995
@clivejones7995 4 жыл бұрын
looking great good luck with the exhaust LOL
@JVerschueren
@JVerschueren 4 жыл бұрын
Could have done with a needle scaler for the rough cleaning there... bit more frugal on the compressed air.
@stevebell6094
@stevebell6094 4 жыл бұрын
Del makes everything look great!
@dcads2290
@dcads2290 4 жыл бұрын
Id love to have a compressor, make life easier lol. nice job
@Moonfleet41
@Moonfleet41 4 жыл бұрын
Not sure where you are buddy, if you're in the States, then Harbor Freight do some insanely cheap ones that are perfectly usable, even for painting, and if you're in the UK, the Sealey range of compressors is equally good value at the entry level... it's worth treating yourself, not just as a garage tool, but it's a safe, efficient and accurate way to keep your bike (and car) tyre pressures quickly checked before every ride...
@stevenmillar6592
@stevenmillar6592 4 жыл бұрын
Memories of my last trip to the dentist 😀
Triumph TT Legend, 3-into-1 Header Pipes (Pt4), Collector !
20:55
Delboy's Garage
Рет қаралды 19 М.
Triumph Thunderbird, / TT Legend, Hydraulics Finally Signed Off.
15:27
Delboy's Garage
Рет қаралды 14 М.
Мясо вегана? 🧐 @Whatthefshow
01:01
История одного вокалиста
Рет қаралды 7 МЛН
It works #beatbox #tiktok
00:34
BeatboxJCOP
Рет қаралды 41 МЛН
Triumph Thunderbird / TT Legend, 20 Year Old Radiator Washout !
16:50
Delboy's Garage
Рет қаралды 21 М.
Triumph Thunderbird / TT Legend, Final Paint install !
16:00
Delboy's Garage
Рет қаралды 18 М.
motorcycle engine block painting, new color, VHT paint engine enamel
12:08
Triumph Thunderbird / TT Legend, Top End Rebuilt, Stick Coils Upgrade !
16:45
How To Paint Motorcycle Parts At Home - Like A PRO!
15:22
TJ BRUTAL CUSTOMS
Рет қаралды 105 М.
Triumph Thunderbird /  TT Legend, Front End Rebuild, "Yokes" !
12:28
Delboy's Garage
Рет қаралды 14 М.
Full Rebuild of Honda CB1300 in 18 Minutes: Time-lapse
17:59
Autumn Car Playing
Рет қаралды 3,5 МЛН
"For $35,000 I'd Expect it to be Perfect"
42:13
Blacktail Studio
Рет қаралды 5 МЛН
Bigger Engine.
2:03:51
SimonFordman
Рет қаралды 613 М.
Мясо вегана? 🧐 @Whatthefshow
01:01
История одного вокалиста
Рет қаралды 7 МЛН