How to Replace Ignition Switch Actuator 1993-1997 Ford Ranger

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@lesteryarbrough2403]

All that for a plastic actuator. Who ever engineered that needs a good beating.

[@andrewhuang682]

About to start a 1996 Ford Explorer 4x4 restoration, and I thank God there's still companies out there like TRQ. With covid a what I believe is pressure from banks and governments to get people to just buy/finance new, I didn't think there'd be any more companies selling parts for older cars.

[@markharms3136]

Thanks! Your way of taking us through replacing this actuator was so superb. No loud music, right to the point with good visual.

[@alisharettkowski2391]

THANK YOU!!! So I didn't have to take the steering column out because it was the 3 little parts in the ignition I was missing I didn't know existed. Saved the day with this video.

[@TRQ]

+Alisha Rettkowski Thanks for watching our video! 1aau.to/m/Shop-TRQ

[@francineperry3485]

One of the BEST DIY videos I’ve ever seen. Thank you

[@danherrmann8755]

Thanks. Job well done. Great explanation. No loud music. I could understand. Every word.

[@Freespiritblair]

Finally getting to my own 1999 Ranger this Christmas. I really appreciate how long your video is and that you told what size sockets, etc. It will be nice to have my 369k mile truck back for those home depot trips. You did a terrific job with this video!!!!

[@Styxxed]

I was doing a 2003 but there were enough similarities that I appreciate what you have here.

[@radamstruck]

Very educational video!! Thank you for taking the time to share your expertise!!

[@batwingproductions4202]

I have a 1996 ford ranger that thinks it is always on. You turn the key off and it won’t turn off. We replaced the ignition lock cylinder already. Is this what is broken with mine? I am thinking it is.

[@CyrussTerra]

Great video. I actually feel like I learned something.

[@richardkeith2545]

Excellent video. Clear, concise and right to the point. Thank you!

[@CAROLDDISCOVER-2025]

How do you remove the ignition switch on a 1992 Ford f250 if you don't have the keys? That's what I was googling and it suggested this video. Watch first half of your email and you are very detailed like usual. But I'll see wasn't showing me what I needed. Understand that you turn the key to run position but that's the problem. Ignition switch in cuz I've lost them.

[@cletussurfsalot7190]

Thanks for sharing this helped a lot. Except now I’m dealing with an Automatic. And not sure how to safely remove the shifter link or Arm. Any sugestions..?

[@buckmaster5552]

Great video,well done. the repair seems involved for the replacement if a small part.Ford should be sued if that is the easy way.No complaints about the video, but it leads one to realize there are couple places we could run into difficulty.

[@cmr2079]

It's crazy you have to remove the whole column to replace the actuators. I was beginning to wonder why he took the whole thing out until I saw how the shaft held the lower actuator in. 23:55

[@javaman2883]

I have to replace that actuator on a 2003 Grand Marquis. With the key I can start the car, but not shut it off. I took things apart to get the switch part off. I can see that the part of the actuator that engages with the ignition switch is the part that does not slide up. The key turning can only push it down (towards the start position, but not bqck towards off position)

[@raymondsreca8767]

This is great but for an automatic there is a lot more to deal with. I did it but had some major problem solving to do.

[@melvinbartholomew6410]

Is it necessary to remove the entire column from the vehicle? I saw a post on the CrownVic forums where someone removed the steering wheel, clock spring, airbag, and cylinder lock housing/tilt and was able to access the actuator rod that way, whilst leaving the bottom portion and steering shafts (with ignition switch and lower actuator block) in place.

[@richthomas6333]

Good job posting this valuable information! I have been trying to replace all the same ignition parts for weeks without success.....but now after watching your video you've shown the way +!~♡~ 37:02

[@Noah-mn2gc]

Why did you change the actuator, what messes up on them? I would think the teeth but those teeth looked okay

[@klausvonschmit4722]

Informative video! Thank you Sir

[@JohnSmith-fb2np]

The block that the rod connects to, how does that come out. i have tried a few times and there sees to be no way. Its "the plastic block" you talk about as you are pulling the two halves apart. its at 17:45 BTW. Great video. i am a fairly accomplished tech, but i have never done a steering column. so this was a great experience and with your nicely detailed and not overly non-subject yakky proceedure was refreshingly proffesional. thanks

[@jesusr7174]

Is this the same column for a 98 mustang gt?

[@NativeMami23]

How did you remove the lower actuator? The big block piece that came out so easily when you removed the frame? My 95 grand marquis did not fall out like that.

[@johns4870]

It seems like this would be the same/similar as the 2000 Ford Ranger Automatic ? With the shift lever being present, of course on the top of the column...

[@AdrianWhite-q2y]

Would i be able to use this video as a guide for my 2001 ranger

[@LiilTyweezy]

WHATS THE SYMPTOMS OF THIS GOING BAD PLEASE

[@TempoDrift1480]

Can anyone say if this is the same for a Crown Vic or pretty much? I can't shut mine down. I can start it with the key but I have to suffocate it and pull the battery terminal to shut it down. The key just spins around if I turn it backwards.

[@ghostbro6376]

Mine won't turn into position to let the key out. Cylinder slot was missing the green piece and the metal plate when I took it apart

[@dereknewton4247]

Did the truck start after all this?? Also where was the part broke??

[@ericwilkes238]

Loosk like yours only has one tilt lock on colum lock mine has two.can i get by with one

[@BlairThompson-o4y]

is there any danger of air bag deployment while doing this install? You don't mention it, but I wanted to make sure before I took on this project! Thanks

[@theaffirmativecarnivore]

What would be symptoms of why you would replace this acuator? I have a 2000 Ford Taurus SVG Sedan that has an almost identical steering column. I turn my key and it will move to the start position, but won't go far enough to turn the engine over to start. I've removed my ignition switched and with the key in the lock cylinder, I can move the ignition switch manually to start the car. Can't figure out why my key won't turn far enough to move the switch post/pin far enough. Any ideas?

[@TRQ]

+@therobbywaller We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@johns4870]

Can someone please tell me how to do this on the TILT WHEEL AUTO version ??

[@robertakre7725]

you should try taking one apart without marking anything. the actuator rod will only install one way . an overall present experience to fuel contempt for the building 5 folks at Ford.

[@jamesvanwinkle1235]

Awesome Teacher ☆☆☆☆☆

[@markstratton7505]

you didn't re install the security clip deal with the black wire>>>> why was that?? thx, :) Mark

[@dharsley9570]

So how much would a repair shop charge for this job?

[@emmauecker123]

is the removal and install the same for a 2000 f350 super duty?

[@TRQ]

+Emma Dana This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-TRQ

[@Simplertimes12]

life saver

[@2mickell]

Good vedio, but he doesn't answer many questions. So many questions are not being answered.

[@petecarrejo440]

Where's the shifter tube at?

[@stevemathis8524]

Do you have a video for doing this on an automatic transmission?

[@markfisher477]

so at 17 minutes and 45 seconds the white block just slides out of the metal housing, but on an automatic Ranger there's a catch that prevents that block from sliding out. what do I do?

[@Maxxis025]

Please never record the audio that close to your mouth again