How to Replace Front Strut 2007-Present Toyota Tundra

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@peloncitosbikes431]

Next maintenance for my tundra did my Lil scion xb already

[@alexislacey4432]

Excellent video! Very helpful thanks! It's so irritating when you look up a how to video, and the "mechanic" narrates his life story before, and sometimes during the video before ever getting to actuallyworking on the vehicle. You guys went right to it WITH the tq specs.

[@morgandrummond3128]

Good video! Very helpful.. Although I found I could do it without removing the bottom castle nut and without loosening the bottom a-arm Bolts, cheers!

[@SlayerofFiction]

If you've never done front end work, this professional makes it look super duper easy.

[@unitedinkllp3050]

Definitely takes a first timer longer than 8 minutes 😂😂😂 He’s a good mechanic though. Knows his craft

[@justinh.1579]

I would like mention that while doing this I accidentally released the lower strut bolt, which dropped the strut down eliminating access to the stabilizer link nut in the a-arm. I no longer had access and had tried forever trying to lift the strut back up, but the a-arm kept lifting as well. After further inspection I noticed the nut inside the a-arm on my 2012 was a WELDED nut and did NOT require a wrench. So not sure if Toyota made that update in the 2012, but it was certainly welded. I hope i save someone else some time.

[@elgoogler3581]

thank you for taking the time to make this video helped me out a lot

[@coolstuffreview3457]

Good video! Thanks so much for sharing this with us!!

[@robertsimonofsky3959]

Great video…..you made it look easy. Thank you

[@korridobson1525]

Great video

[@tingshawn]

Why remove the center bolt at the bottom? The one with the cotter pin.

[@vicarnieva5401]

how high do you need to jack the control arm to preload?

[@unitedinkllp3050]

Your a beast dude!!

[@elirodriguez514]

Why is torquing so important?

[@nugent5438]

Several unnecessary steps, assuming because you guys clearly made several videos with this same footage. I did this exact job this weekend on my 07 Tundra.

[@SlayerofFiction]

Whta was unnecessary?

[@djsmootht6825]

Middle nut on lower ball joint and tie rod arm can stay on. No need to take them off. Two people doing this task makes it a whole lot easier.

[@fazalc2416]

How much would your shop charge to do this job?

[@darthtyranus7683]

I feel for the new englanders and Canadians salt damage doesn't sound so fun

[@Erik-rc7iy]

Why does every idiot doing this loosen the lower control arm bolts!?!? Loosen sway bar links, remove outer tie rod, remove UPPER CONTROL ARM castle nut then with pry bar manipulate lower control arm until strut comes out!

[@patrickshalligan]

Tundra uses coil over shocks not struts.