How to Replace Rear Wheel Bearing Hub 2003-2008 Toyota Corolla

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASHR00048
This video shows you how to install a new wheel hub and bearing on your 2003-2008 Toyota Corolla. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This process should be similar on the following vehicles:
2003 Toyota Corolla
2004 Toyota Corolla
2005 Toyota Corolla
2006 Toyota Corolla
2007 Toyota Corolla
2008 Toyota Corolla
Tools you will need:
• 14mm Socket 1aau.to/obiV/1AXAA00015
• 21mm Socket 1aau.to/oaaJ/1AXAA00043
• Acetylene torch
• 1/2 Inch Impact Gun 1aau.to/oqv/1AXAA00252
• Air Chisel 1aau.to/obk/1AXAA00270
• Socket Extensions 1aau.to/obiV/1AXAA00015
• Torque Wrench 1aau.to/oawU/1AXAA00044
• Anti-Seize Grease
• Brake Parts Cleaner
• M8x1.25
• Hammer 1aau.to/oQZ/1AXAA00091
• Large Hammer 1aau.to/oQZ/1AXAA00091
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@stephendoane2075]

I really like how you show many of the "what happens if" such as you can't get the parts apart - they are rusted together. When you use heat to break the rust seals, where to apply the flame, what to avoid hitting with the torch - awesome! So many of these type of videos show only the basic "how to" doing the procedure on like-new cars where everything comes apart quick and easy, and I swear before they make the video, they actually DO the procedure, deal with any issues, then record their video so everything will be quick, easy and clean without issues. This was a TREAT - looked like this procedure was the worst possible case - never saw that much RUST on any vehicle except those that were in a junk yard for years in the rain! Also indicating the torque values and even order of tightening - Thank You!

[@TRQ]

+@stephendoane2075 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

[@josephsmith3195]

Glad i live in the south

[@johnmcminn9455]

this is a good Ad for Anti-Seize

[@user-th3xd1sw9o]

You did a good job on Shawnee exactly how you doing

[@lobecosc]

Very interesting. I believe that this is in my future for my 05 Corolla so it's good to know what to expect. Great job.

[@TRQ]

+@lobecosc Thanks for watching our video! 1aau.to/m/Shop-TRQ

[@notsure4508]

excellent vid ! Thanks

[@mikes.4811]

I have to replace the dust shield that rusted away and wont hold the pin for the ebrake anymore on my Vibe GT, which is the same as a Matrix XRS. It has rear disck brakes, though, and I dont want to damage the hub assembly. I cant find any videos on this but this video should help a bit. Thanks!

[@dseelman1984]

The lug nuts are 19mm. Also, why didn't you use a slide hammer?

[@user-ek5gh5ug4y]

Neat job

[@massihkheiry8067]

Good

[@arthurl.9985]

Gravity bleed is enough just disconnecting 1 line . I've never had any problems.

[@Anthony_in_Bloomington_Indiana]

Tuesday, August 15, 2023 ☁⛅☁ Could I get the hub off without removing the brake hose? 🤔 My car is a 2004 Corolla, with a fair amount of rust. I already know the brake fitting will not break free.

[@morganwk2753]

How do we get it out if we don't have an air hammer or torch?

[@Hammerback972]

Looks like that car came from a junkyard. Thought my hub assembly was rough.

[@paulusul1740]

I really would like to do this myself but .... this looks like a possible nightmare.

[@jrhaas26]

Dang! That was a chore