TRRS

[@1925sk]

It’s hard to find a decent review of this rig, but yours is definitely one of the best. Most just ramble on and don’t really describe the functions . Thanks.de Chuck NL7IB.

[@hamrad88]

Thanks and have a great day.

[@fatcat2939]

Very enlightening Tom thanks. I've been using my new 750 for a few days. Really enjoying it, its the only decent radio I've used since my grandmothers old valve set 30 years ago. I noticed the tuning knob seemed to feel a little unstable though. I checked the lock nut and it was loose. Tuning knob feels much better after I tightened it.

[@hamrad88]

Thanks for your comments. The loose knob is quite common on this radio. The original 750s were worse. Keep us posted on your experiences with the 750. Tom

[@راديواتتركيا]

This shown is a video clip written Grundig. This is Chinese. A device written in iTunes is one of the best. Thank you

[@COATES77241]

Great presentation Tom

[@hamrad88]

Thanks and have a great day.

[@1fanger]

Hey Tom, thanks for the show!

[@hamrad88]

You are welcome. Tom

[@راديواتتركيا]

Hello, I have a Grundig satellite 650 radio, a burnt out clock. What is the way to change the radio? Is it easy or difficult? Thank you.

[@omarmang]

Thanks for the great video, can you tell me the difference is between the 750 and the 750 Ultimate?

[@hamrad88]

Sorry, I don't know of any differences. Perhaps someone else will answer your question.

[@thomastammaro693]

Just found this video. Learned something. In my opinion this rig falls short. However GREAT audio.

[@jtahumada9025]

Nice show Tom, I’m newbie in the SW world but I adopted your channel as a great reference for it. I’m planning to hook up a MFJ-1778M antenna to it and at this point ¿can you help me telling me what’s the adapter I must connect from the end of the antena to the entrance of the satellite 750 please? Thanks upfront. Regards from México 🇲🇽

[@hamrad88]

Your coax cable to the antenna will most likely have a PL-259 connectors. So you need a BNC Male to PL259 Female adapter.

[@ragnarzuzu]

Agree. This is instructive show. Nice.

[@hamrad88]

Thank you, Robert. Tom

[@richw1907]

Hay Tom, yet another good vid, My question would be--- is the 750 worth the money??? I normally radio shop for the best bang for the buck, right now I'm going between the Tecsun 880 and 660, I also have the DX160 (and love it for the good old days value) and DX440, KD7YKR, 73s

[@hamrad88]

Yes, the 750 is a very good radio as they have fixed some of the early problems they had with this radio when it first came out. It's not really a portable so if you want something to carry around a newer version of the 660 would be better. Lastly, if you want an 880, I would suggest you wait until they fix some of the problems with the early versions. I have had two versions of the 880 and the second version they fixed many of the problems but not all. Tom

[@jjhays36]

Just picked this radio up today for $200. I should have bought one sooner, it is actually a capable receiver for the money. Don't understand why all the negatives on this receiver. I have it hooked up to a military grade (Harris) long wire with an antenna tuner and wow the stations really come out!

[@hamrad88]

Yes, it is a good radio for under $300 price range. Tom

[@RadioRich100]

@@hamrad88 Tune it around strong stations on frequencys next to the station your listening to and you will see why people that own them say what they do. And have a high failure rate to boot.

[@jimorlich5776]

Where can i find replacement potentiometers (value unknown) for the Squelch, RF gain and the SB BFO controls? The radio is a Eton Grundig Satellit 750 which is the same as Tecsun 2000. Anyone with the schematic diagram please tell me the values. Thank you so much !

[@راديواتتركيا]

Hello, is the original 750 device German or Chinese? Can I know the original from China? Please clarify? My greetings

[@hamrad88]

My understanding is the original is German. The Chinese one is sold under the name Eton.

[@misteredison2175]

Nice Shstick man!😁

[@thedancingalien7766]

When i grow up I wanna be like you.

[@jkssr1885]

why is it im hearing whats on but no meter reading? Is the meter crapy on that radio?

[@hamrad88]

Jim- Hamradio This is a great radio (see my other videos) and there is nothing wrong with the S meter. Thanks for your comments.

[@jkssr1885]

asking because i may get one and im a ham so woundered about the meter. I did see the other vids thanks..

[@hamrad88]

Jim- Hamradio Ok, yes the meter works fine. This is the latest version of this radio (purchased last year from Amazon). Note this is not the Eton version.

[@fitcher-armchair-sleuth]

I hope other (ETON) Grundig Satellite 750's are better then the one I bought. So far I've discovered numerous cold solder joints, bad connections and scratchy ferrite antenna, bad pots .. Like the volume control. If I tapped one end of the rig up and down on a firm surface (not hard of course) it powered off and on. Eton now sells it as the Eton Elite.. lol. I would beware. Oh and I purchased mine back in August 2012.

[@hamrad88]

I have never had any problems with my Grundig radios where I have heard the Eton radios have a lot of quality control problems.

[@fitcher-armchair-sleuth]

Thanks for reply Tom .. I'm glad you didn't have any issues with yours. I wish I would have purchased a Tecsun version .. It's really confusing trying to figure out who builds what brand / version. Thinking about getting something else, but not sure just what yet. Not anything Eton .. That's for sure. Any suggestions? :)

[@hamrad88]

@@fitcher-armchair-sleuth For something to consider is the newer Tecsun radios like the H-501x. I have several shows on this radio and really like it. I got mine from ANON-CO. Anna from there has been very helpful.