Truck bed liner for keel protection review after time in the water

[@rowdy127100]

exactly the results i was hoping for! much obliged partner!

[@bequietandfish5794]

+T He your welcome I'm sure that if you do this during the summer and let the boat sit in the heat for two days it will cure much faster.

[@rowdy127100]

+Be quiet and fish in oklahoma. perfect weather right now. mine is a 40 year old boat but i have it sanded and taped. going to allow 1/2 inch to wrap around all the side for added sealant and protection. your video was great tho and helped answer some questions i had not thought to ask.

[@bequietandfish5794]

+T He Cool beans, I am going to be in Tulsa throughout this next week. One recommendation I would make is once you think it is dry let it sit in the sun for one more day. I hit a decent sized rock with the liner today and it just shrugged it off.

[@Moparfest_Robbie]

Hey! How is this held up over the last five years?

[@visiteavecmoi]

Do you think i could do my sailboat deck with bed liner???

[@andrewhicks8663]

Yes you can! Although its will be rough on your feet depending on how you spray it!

[@joeyjoe8892]

I live in Florida it's like a 100 degrees everyday do you think it would cure faster as well???

[@jacqueskisling8241]

thank you sir . any update on how the boats doing . I've just done mine .

[@bequietandfish5794]

Hey man shoot me a youtube message with your email and I will send some pics on how it held up over the last year and show you what I would have done different. I want to do a video to cover it but I got my camera wet and won't have a new one till the end of the month.

[@jacqueskisling8241]

Hi just delete this when you see it but shoot me a email on [e-mail]

[@jsfetters]

NZshooter shooter sorry I broke my arm and have been off the channel for a bit, I will email you tomorrow.

[@jacqueskisling8241]

Be quiet and fish thanks man . I really appreciate it. I've done my boat today . so I'll send you some to

[@bequietandfish5794]

I have been working late and the sun is still setting early here, I will get the pictures to you soon. The only spot it didn't hold up perfectly is where it contacts the roller. If my keel roller didn't have a sharp angle to it there would be no difference between day one and toady.

[@hurleystowing]

Any noticeable Effects on the speed of the boat? Faster or a drag? Thanks

[@hurleystowing]

??

[@joeyjoe8892]

and do you have to sand down to bare metal or can you just scuff and wash your bottom really good I really like the way you did this I'm digging it but hey I guess that's what KZbin is for!!!

[@matthewszostek1819]

do you feel like it slowed you down? wither way this is happening to my sailboat.

[@andrewhicks8663]

It can't slow your boat down drastically

[@GaryARahn]

How much did it slow your boat down. I have a McGregor 25 sailboat and am considering doing this to mine.

[@johnpeitsmeyer3566]

What brand of bed liner did you use?

[@bequietandfish5794]

Dude I used harbor freight and it worked wonders, just make sure it isn't cold when you put it on your boat.

[@bentech8887]

4 cans did the entire boat hull?

[@tommykays7268]

Is this the harbor freight spray can bed liner??

[@catherineharris4746]

Nice!👍

[@leurek]

I have a 15' flatbottom already bed lined the inside bottom of it, any suggestions on where to do what you did on the bottom? should I just line the first 6' that gets beached?

[@bequietandfish5794]

I only did the spots that get beached but if you have a leaky rivet or two it won't hurt to cover them as well.

[@zachnichols3804]

That’s gotta slow your boat down a lot unless your running a prop

[@roccoseals7753]

What type did you use

[@zanelile8192]

Do you think it will work OK inside the boat on the floor ?

[@danlafleur2151]

have you noticed any extra fuel consumption due to a possible drag because of the bed liner on the bottom of the boat? I am rebuilding my 1981 gurmman 15 ft semi V. also how much weight do you think it adds to the boat?

[@bequietandfish5794]

I used less than one pound of actual material. I have not noticed any speed loss and no extra fuel consumption. As far as drag in my setup once the boat is on plane the bedliner is out of the water.

[@jwrhynejr.6689]

Thanks for the info!

[@blake102989]

You used 4 cans on that small spot?? Did you put like 12 layers on that spot? Haha

[@gasgreaselounge6683]

Be quiet and fish do you think this will work to help stop leaks on my Jon boat?

[@danlafleur2151]

thank you sir for getting back with me so fast! I'm goin to spray probably 80% of my boat. thanks for the videos!

[@bequietandfish5794]

Any time man, it has held up well, I had to reapply at the 3 year point but only to the parts of the boat that were hitting the trailer rollers under the weight of the boat. I would recommend doing roll on if you are doing that much of the boat, also take your time on the prep, sand and sand some more.

[@danlafleur2151]

Yes sir. I just started sanding today. When it comes to the bottom of the boat I am goin to sand blast it. I will roll it. It's a bit cheaper because of how much I will need. Lol

[@engsetters4633]

You want your boat to sit in the roller better then that. You're putting alot of psi on the boat.

[@Dmonieluv]

Be quiet and fish Love it! Lol!

[@larryfarmer5332]

what bedliner did you use

[@bequietandfish5794]

Larry Farmer I used the harbor freight stuff, it works just as well as any name brand

[@larryfarmer5332]

Thanks