F-117 Nighthawk cardboard - F117 cardboard DIY l S-DiY

[@SDiYchannel01]

Cám ơn các bạn đã xem video ! Và cám ơn tác giả bản vẽ, chú Dzung50 ! Rất cám ơn sự ủng hộ của các bạn, hãy like và đăng ký kênh để ủng hộ mình nhé ! Thank you for watching the video! And thank you to the author of the drawing, Mr.Dzung50! Thank you very much for your support, please like and subscribe to the channel to support me! Because of the language difference, I use google translate, hope you understand!

[@eduardomonteiro2290]

👌

[@electronios9793]

Love the project. Where do you buy the large 5mm cardboard?

[@adayinlife1001]

@@electronios9793 you can find on the store which store selling TV, fridge...

[@studio436]

Bạn ơi cho mình xin số điện thoại bạn

[@thanhhighfly4446]

Sân kcn được vào bay rồi à bạn

[@nfineon]

This was most impressive!! Perhaps the only onboard shots we could get of the f117 airframe geometry in flight! It appears very stable for a low aerodynamic high stealth design.

[@lurkerrekrul]

I'm surprised that it actually flies. The wings are flat and don't have the typical cross-section that provides lift on most planes. Also, it's not the most aerodynamic design to begin with. That you built a version of it out of cardboard that can actually fly is amazing. Good job.

[@timtim2668]

You have a Serious gift of understanding fine details and design to make something so simple looking but is I'm sure difficult to make and tune! Awesome Job!

[@SDiYchannel01]

Thank you !

[@truthtellor5366]

power planes have wide tolerance....plus... A lot of these videos are fake they're flying on the end of a fishing line.... ha.. This 1 is real it's a special light weight single base cardboard.....

[@fouledanchorfarm1192]

I was in a Naval A-6 air squadron and we had stacks of computer cards made of heavy weight paper. On days the birds were gone, we'd cut those things up and tape them together to build our own versions of planes. Then, we'd see how far they'd fly in the hangar. We had some pretty good ones that flew really well. We had a few that flew like rocks😊 Your aircraft was after my time, but I think we could have built something close to this and made it fly. This is a very cool model! BZ

[@SDiYchannel01]

Thank you very much !

[@hobbyrctamil7226]

You are making this hobby soo easy and building an confidence on building an airplane with their own , love ur work ❤️

[@VisitBeforeHumanPollute]

Bro Remote controller console cheap uh chennai la enga kedaikum, Ofcourse online also💯

[@hobbyrctamil7226]

@@VisitBeforeHumanPollute gaming console ah illa radio control console kekkuringala

[@hobbyrctamil7226]

@@VisitBeforeHumanPollute gaming console venum na moosa gaming ritche street, radio control and rc products la venum na majestic shop ritchie street

[@VisitBeforeHumanPollute]

@@hobbyrctamil7226 unga kitta neraiya details irukum polaye 🤗❤️ Thanks bro, Naan drone Transmitter keten

[@sarupyon]

全翼機ってコントロールが難しいって聞いてたけど 意外と普通に制御できるんですね アップありがとうございます♪

[@KurtElliott]

Nice, I did not expect to actually see it fly from just looking at the thumbnail !!!

[@avichalsharma3856]

Wow so cool. Now I can fly without being detected by any radars.

[@BurdaModen161reg]

Молодец! С физикой на "ты"... Руки от куда надо. Спасибо. Залип...

[@とりけら-z9q]

どうやって降りるんだろうと思ったら着陸まで完璧でした！！凄い！！とにかく凄いです！！！！（ごめんなさい、語彙力が）

[@SDiYchannel01]

Thank you!

[@solidbase77]

Absolutely GORGEOUS project!!!!!!!!!!! Such a nice flight of the card Nighthawk! )))

[@aramroshani6197]

it is a wonderful modeling, not only by the correct shape that you obtained but also it works correctly !!! Good Luck.

[@luizfelipemadeirademacedo5569]

Hello S-DIY I'm brazilian, engineering student, I'm so glad to make this planes and I love your videos thank you so much for making this videos, I am a member of an aerodesign team, we compete at SAE Brasil I learned a lot from the team and watching your videos I can apply it to my planes that were made using your videos, only words I can say is thank you, keep doing it!!!

[@SDiYchannel01]

Glad for the encouragement. Thank you friend!

[@SangLe-qr9vn]

Rất thích anh gắn cam vào máy bay và lồng nhạc. Hy vọng anh ra nhiều video dạng này hơn dù ko có mẫu máy bay mới, chỉ cần cất cánh và nhìn khung cảnh thôi đã thấy tuyệt vời rồi.

[@SDiYchannel01]

Cám ơn bạn nha !

[@hhKJgf1M8a0rzt8hP]

This is beyond amazing! Excellent video, thank you.

[@sameermir9719]

I was wondering what remote control you use . How do you program the remote to the plane ?

[@DoctorBrute]

Wtf!! That’s amazing skills, designing, building and flying! Superb!!

[@thomascarmichael6760]

This video is just what I was looking for. I’m always on the look out for alternative materials to build with. Chuck Felton built control line models from cardboard for years. Thanks for such a great video on a fantastic aircraft!

[@SDiYchannel01]

Thank friend!

[@ЕвгенийАрьков-с7р]

Could you please elaborate which materials do you lack and seek alternative to?

[@Richard_DS]

Awesome concept!! Great work and demo film too. This is something I can do to make use of my miscellaneous drone motors. Thanks for sharing.

[@anuragjhayolo]

Bro, this is a masterpiece! Perfection!

[@sportsvaultph5322]

I thought this is just like a model plane when I clicked it, never thought it could actually fly, just wow!

[@SDiYchannel01]

Thank you!

[@albertoalvarez6487]

Gracias x su tiempo para enseñar el aeromodelismo, además es divertido a my me gusta mucho, además los materiales novedosos. 🇨🇴🇨🇴🇨🇴🇨🇴🇨🇴

[@SDiYchannel01]

Thank you so much!

[@shakerabdo5012]

This design is suitable as a graduation project .. your channel is worth subscribing to.👍👍👍

[@rcbinchicken]

Your cardboard plane looks better than most of my foam ones! :P Great build and flying, awesome work!

[@SDiYchannel01]

Thank you friend !

[@GreenerShadeRC]

Excellent modeling. Very precise and good looking plane that flies well!

[@hatde8832]

Hay lắm bạn .. mình cũng có bản vẽ con này nhưng chỉ làm mô hình cho nhóc chơi .. cũng muốn làm cái RC , thấy clip của bạn cấu hình đơn giản mà bay nghiền quá .

[@aryrabenhorst3320]

Só hoje assisti o vídeo. Parabéns pelo projeto mas moro no Brasil e aqui a dificuldade em adquirir os itens eletrónicos, as rodinhas são difíceis ou seja tudo que precise além do papelão será difícil de se encontrar e caro. Adorei o projeto e fico feliz por ter sido disponibilizado gratuitamente por download. Parabéns.

[@michaelviana]

será que eu consigo achar na santa efigência ou até mesmo importar pelo aliexpress?

[@tonyrod4388]

Your kids must love you!

[@venutejaa9846]

Love from India 🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳

[@jpringlephoto]

Beautiful, next time do a low flyby over the water. 😅

[@gregmcgee4430]

It warms my heart that you have the freedom to enjoy the little things in life. My father did 4 tours in the Vietnam war fighting communism, proud his service wasn't waisted.

[@02-vietcuong5]

Đợi anh ra video mòn mỏi lunnn😭

[@felipegomez6729]

Bro, that's freaking AWESOME 🤙 you made that Build,look so easy. my Respects 👏👏👏👏

[@minhtannguyen7061]

Đại ca quay lại rồi mừng quá. Chúc đại ca gặp thật nhìu thành công

[@marcokalin389]

Besten Dank für dieses tolle Video und die PLäne... Ich werde so ein Ding bauen und dann im kommenden Frühling starten... Vermutlich werde ich es noch bemalen... Toll gemacht! Gruss aus der Schweiz...

[@SDiYchannel01]

Thank you very much !

[@hterra2706]

Your videos are amazing! Thanks for providing the parts list!

[@timbacchus]

Where can you buy large pieces of card board like this? So much fun. Be real careful with the weight and balance before gluing Great how you set up the flaps to work as elevators.

[@pkf4124]

Great build. I wonder if ducted fans would also work on this build.

[@carsonko2900]

Not seeing the aluminum motor mount in description. Do you mind re-Sharing it? Also, some documents for the landing gears would be nice.

[@ds0703]

Next time try sprinkling baking soda on the superglue, the joint will be almost as hard as a stone.👍

[@cubersopedia5137]

GREAT WORK! but one problem i am unable to clearly view the a4 paper drawing so can you upload in one sheet and put the length markings near it which is more easy. Anyway awesome project!

[@bahmanunessi4045]

A professional JOB ! 2 thumbs up 😎

[@СатхийРокосовский]

Это просто шикарно,молодец автор👍👍👍👍👍👍

[@solidbase77]

Согласен! Просто потрясающе!!! Золотые руки у этого человека! ))) Сделать летающий F-117 да ещё и из картона..!

[@swanebrokendeep]

Super vidéo super bien détaillée ce qui n'est pas le cas de toutes les chaînes! Superbe réalisation! Un grand bravo et un grand merci pour ton partage! Nouvel abonné! Swane.

[@stuart3712]

I use to make cardboard RC planes when i was in the 3rd and 4th grade at home. Took old RC cars and trucks apart and started making RC planes out of a large 747 foam glider walmart use to sell and then i moved to thin cardboard biplanes i made from pizza boxes and such. Won first place in my city's school arts & science fair in montana like in 1994 with my RC planes.

[@강건우-y2h]

이런 영상 보면... 구매해서 만들고싶어진다. 잘 보고 가요

[@AKElectroDIY]

I am also making this plane by seeing your video. But I have a question. Where should I mount the motor in the plane? Should it be in the center as in the plane you made from depron foamboard or it should be at the back side like in this plane?

[@SDiYchannel01]

Thank you. The only advantage of the motor behind is that it is more realistic, with less noise. But it will be more difficult to control, requiring precise installation of the motor angle. So a mid-engine would be an easy choice for flying. Wishing you success with your project!

[@AKElectroDIY]

@@SDiYchannel01 Thanks for the reply. I also saw your F22 video and I made the same plane. You can see the video on my channel. Greatly inspired by your videos.

[@ghithaaalkhateeb3117]

Very useful and beautiful Thanks for good job Good luck 👍🏻👍🏻💜

[@cyclonmaster]

Interesting...cardboard not that heavy? can fly...wow.

[@hisabisayan]

いつも素晴らしい動画に感銘を受けております。ありがとうございます。真似してみたいと思っています。ありがとうございます。 I'm always impressed with the wonderful videos. Thank you. I want to imitate it. Thank you.

[@SDiYchannel01]

Thank you!

[@montucombat82]

the landing just wow the whole video I enjoyed thank you

[@SpOnJeRo125]

Ei, cara....que massa de projeto, véi? Pode crer Dei valor, viu .... Está de parabéns Vibrei aqui de emoção na hora do pouso kkkkkkkk Ganhou um inscrito

[@marcofarro7002]

muchas gracias, te agradezco de todo corazón, gracias, saludos desde Sucre-Bolivia

[@VTOLKits]

Nice Fighter, great build!

[@SDiYchannel01]

Thank you!

[@marciodossantos1602]

very nice, congratulations for the beautiful work

[@lawrenceogden3736]

Great video must be fun building something then watch it flying

[@randomstuff9095]

You know what you have that makes your vids stand out from other YT creators like u? You have good editing skills.. it makes your vids fun to watch!

[@SDiYchannel01]

Thank you...

[@raihOficialgamesplayers]

Show 😱 sua invenção manoooo😱😁👍

[@abdurazagbazuti3247]

Dude you are a F****** genius, I love your work, it’s insane. big like and huge monster subscribe 👍👍

[@SDiYchannel01]

Thank you!

[@athiherobert2843]

Very soon it's gonna be on strange sighting 😎

[@seriestvgilflorez797]

Invierta en una buena pista... en la vida real a escala... Esta pista no es aceptada... Ja ja ja saludos y buen HUMOR. Me gustó el diseño del avión. ✌️😎👍.

[@cau6806]

A ơi motor 2205 pin 3s 1500 xả 30c nên đi esc nào và hãng gì ạh ( giá tầm 260k quay đầu ạh ) E thấy mn hay dùng Arrows hoặc skywalker ❤

[@SDiYchannel01]

Với cấu hình gọn nhẹ vậy thì dùng esc 30a nha bạn, tìm mua skywalker chings hãng. Nếu rành hơn thì bạn dùng ESC 30A blhelis kèm bec rời của quadracing, chỉ nặng 10g nhưng rất mượt!

[@cau6806]

@@SDiYchannel01 ubec mấy a vậy ạh

[@juansanmartinfierro7813]

Maravilloso, gracias por ése talento. Un abrazo desde Chile

[@itsrairamones]

Thankyou friends for the poison, after I already ordered the parts you put on the descriptions after I watched your video 😂

[@What7iwatchxd]

So cool !!!😍😍u do a amazing job !!

[@hoanglongle2837]

Thật không thể tin nổi...bạn quá tuyệt vời.👍👍👍

[@matthewwatts3129]

Subscribed! Your channel is awesome. Amazing skills 👏. Thank you 👍

[@s-creative8763]

uầy đây gofiiiiiii đợi chú mãi mới ra , con là thằng hồi trước hỏi chú làm trainer trên fb nè ^^

[@SDiYchannel01]

Hihi gì mà chú ghê vậy !

[@s-creative8763]

@@SDiYchannel01 có vợ con rồi mà =))) bảo đang làm trainer mà tới h vẫn chả thấy video nào hết =)))

[@SDiYchannel01]

@@s-creative8763 trainer fail toàn tập. Hẹn ver sau nhé !

[@s-creative8763]

@@SDiYchannel01 a cũng fail à kaka e fail 3 lần đổ nãn quá dẹp ngủ nghỉ =))) đập nát hết cả đồ

[@SDiYchannel01]

@@s-creative8763 Hehe. Đối với rc thì f22 flat mới đúng chất trainer kk

[@fabiocarvalho699]

O melhor que já vi até agora no KZbin..medidas perfeitas e muito bem explicado como fazer..

[@augustomunoz-zo3mz]

Como obtengo los planos

[@crystalclearwindowcleaning3458]

This is a great design. It looks really good in the air and seems to fly quite well. Would painting the cardboard, or covering it with black plastic tape make it to heavy? Would it work as well using EPA foam board?

[@6-Iron]

Use corrugated plastic.

[@efohelp1130]

Genius. Thanks for sharing. Now I first need to learn how to drive my ten dollar remote car 🤣

[@nicko9969]

Very, very nice mate. Thumbs up. 👍💚💯

[@おぐりたつ]

Are you using a governor for throttle control?

[@emmanuelsanchez4701]

Can I know what type of camera you used for the airplane?

[@AvionesDePapelPeluso]

Que pasada, me encanta. Increíble tu avión amigo!!. Saludos! 👏👏👏🙋‍♂️🐱

[@romanlashch]

great work! If you agree, I will try to build it for myself

[@Sry4]

Thanks for the Malay subtitles. Although I am very sorry that there are no Indonesian subtitles, I am quite familiar with Malay. Sorry because I use google translate🙏 Salam serumpun 🇮🇩🇲🇾

[@SDiYchannel01]

Thank you!

[@vilmondesribeiro4363]

I just cant belive ! it's awsome!

[@theplacebeyondthelies2429]

one could make it more aerodynamic by closing off all the cardboard openings that are facing towards the air pressure, maybe with shaping some pieces of carton into prisma like lines, then glue them over the openings... but I get it: one wrong landing and the plane is broken, so you might not want to waste too much time on perfecting it, if then you have to do it all over again.

[@riskyfy4457]

Does the vertical stabilizer able to yaw?

[@Tyemuck18]

The guitarist in this song reminds me of Van Halen. RIP Eddie.

[@tayhothiepcuoi4771]

Chú Dũng mai hắc đế đây mà, rất tự hào về chú😄

[@cadetecamundongo-rj6xn]

Bom dia meu amigo... excelente excelente... parabéns...falar o quê meu amigo....do para quem tem o dom mesmo! Deus abençoe sempre 🙏 família e canal e produções....dessas maravilhosas aeronaves.. Brasil...

[@SDiYchannel01]

Thank you...

[@cadetecamundongo-rj6xn]

@@SDiYchannel01 ok meu amigo... Brasil QSL.....

[@lucahachani3051]

May we pilot this kind of plane thanks to a caméra or it easier to do without ?

[@eldiablo155]

you gotta find out another spot for the motor to preserve that prop, the knock sound at TO and landing doesn't sound really good. I downloaded the plan, I'll built one a bit modify Thankyou

[@OlaWaledpol]

I'm impressed by your builds... Great crafts from a great mind! *👍 *

[@SDiYchannel01]

Thank you friend !

[@skipstalforce]

Needs a "FRAGILE - THIS END UP" sticker!

[@vkThor]

you are very good man, congratulations...

[@ajuoommen9304]

Can we use a different esc for this jet

[@RC3Dgeek]

🔥Hello, belle construction !! 💥💨

[@SDiYchannel01]

Thank you so much ! Your projects are amazing!

[@RC3Dgeek]

@@SDiYchannel01 😉 merci beaucoup !!

[@oohhboyy2600]

if you spray paint the carboard it can make water resistant

[@hisabisayan]

いつも素晴らしい動画をありがとうございます！尊敬します！ Thank you for your wonderful videos. I respect you. Your challenge gives you courage and hope.

[@netolen]

Hello. The parts list does not have wheels and the RC controller. Can you provide the details for it?

[@shangoat2008]

我能体会到飞行的浪漫了，感谢你的精彩制作和飞行。

[@RCaeroDepron]

Great video as usual I'm a fan I just finished a Spitfire in depron (see on my channel) but I would like to try this super nice model Thank you for all these shares

[@gaurvigaurvi6134]

Where should I get the aluminum motor mount

[@yorrs001]

Muy bueno. Y resultó ser bastante maniobrable por lo visto. Felicitaciones.

[@JDI277]

hello..im from malaysia,if i want to build this diy plane..what is the requirement of controler should i buy...tq sir

[@celdo84]

Horrible aerodynamics, but still flies. It is a miracle