Tsprof KO3 Pro Review! The best sharper in the world?

Рет қаралды 4,940

4 ай бұрын

Find me on instagram! @bp_custom_knives
Referral link: tsprof.us/?ref=xUiS8dsf
Thanks for the support guys! Please drop a comment and let me know what you think. Feel free to ask any questions! I truly enjoy using this sharpener and I highly recommend picking up any of the tsprof sharpening systems. Please use the link above to help me out so that a small percentage of your purchase comes to me 🙏 thanks again, cheers!

Пікірлер: 37

@dtsouza2519 Ай бұрын

Great video, nice sharp camera angles and impressive results on that knife. I just got delivery of my TSPROF K03 Pro the other day. Do you ever have to clean the strop plate you use, and if so, how do you clean it? Thanks for taking the time to make this video.

@haidensebestyen2341 4 ай бұрын

Genuine and well made tools are absolutely beautiful. Good job with this video and the review. I might just go pick one up for myself

@doubleohhhhseven 3 ай бұрын

Thank you for demystifying the use of this type of system for someone who's thinking about picking up something like it.

@bpcustomknives4392 3 ай бұрын

No problem 🙏🙏

@darylobey8867 2 ай бұрын

Don't think getnit i have one and holy shit is it Worth it

@Citybikeing 4 ай бұрын

I bought one of these for personal upkeep of my higher end blades and definitely haven't got my moneys worth yet😅, but I love the system and no buyers remorse

@Jonnygurudesigns 4 ай бұрын

Well put together video. You do really well with videos bro. Very clear and concise speech. Informational and you know how to give it a good flow. That sharpener is amazing. I'm totally sold on it and I will pick one up when the time is right and when I do I will most definitely use your link thank you for the video.. lots of useful nuggets of knowledge all throughout

@Crybotenabled 8 күн бұрын

Awesome review, I'm really interested in getting one. I'm new to sharpening, but I have a large collection of Atoma diamond plates and Shapton glass stones. Can I use those with this platform? I just spent a small fortune on the stones and don't really want to buy new ones. Thank you!

@Thepreppersbunkeroutdoors 4 ай бұрын

I have been wanting a ts prof for quite some time

@bgknives 4 ай бұрын

Good job bro🎉❤

@Custom_EDC_Knives 4 ай бұрын

🤔I might be ordering one

@dondavis769 5 сағат бұрын

Where did you get the blue anodized Kangaroo-strop??

@mr_frost7730 4 ай бұрын

Nice video as always, buddy!👍🏽 I’m wondering what is the grit finish on the blade before etching? Thanks!🙏🏽

@bpcustomknives4392 4 ай бұрын

400 in the flats and 220 in the bevels

@TheScrawnyLumberjack 4 ай бұрын

Deburing is the most important step and raising that angle just a touch is going to help get rid of that burr and the root burr. I doing something semi similar.

@Antimatter. Ай бұрын

Yeah , TSProf actually recommends to raise the angle 0.1 degrees after every stone , I don’t do this but I like the idea of rising the angle 0.1 on the last stone , on a leather strop backing off 0.2-0.3 degrees will help from rolling the edge , I have been using bass wood with stroppy stuff or gunny juice diamond emulsion, with the wood you can keep it on you final degree with rolling the edge , My biggest problem with the K03 etc is hitting the tip and keeping it perfectly flat at the tip , I have to concentrate I don’t roll it .

@Antimatter. Ай бұрын

Thanks for the review , I noticed when you sharpen on one side of the knife you sharpen from heel to tip and other side from tip to heel , because I have done this too , But I heard its better to keep the scratch pattern going the same way via both sides , the edge may get slick by diminishing the teeth of the scratch pattern, Do you have any insight on this ?

@RichardOutdoors 3 ай бұрын

Do you use TS Prof replacement stones of after market versions? If so, which do you recommend? Very clear review, you deserve more subs.

@bpcustomknives4392 3 ай бұрын

I actually haven’t needed to replace any stones yet besides the corse stone. I replaced it with a hapstone brand and I’m happy with it. I also added a veneve resin bonded diamond stone at 800 grit, but I wish I got a 400 grit instead. I appreciate the comment buddy.

@jameshoward8161 2 ай бұрын

Why do you wish you had the 400 instead?

@zephan55 5 күн бұрын

I’ve been told to clamp the center of the blade. I see your edge is to the side of the center of the clamps. Do you not find it matters? Thx.

@TheGuidedSharpeningGuide 3 ай бұрын

Great video and i really like the sharpener but the one thing I think I would change is that the angle finder is made on the rod. It moving around and jarring around the whole time your sharpening cant be good for it.

@bpcustomknives4392 3 ай бұрын

Thanks! You have a reasonable observation, but I’m sure the designers of this took that into consideration. It also has a calibration function too! 🤙

@Spartices 3 ай бұрын

My K03 just arrived a few days ago. Do you recommend going up by .1 after using each diamond stone?

@bpcustomknives4392 3 ай бұрын

It definitely won’t hurt anything! In fact, that might actually help in some ways.

@Spartices 3 ай бұрын

@@bpcustomknives4392 I’ve watched other videos and how raising the angle by .1 helps the “micro bevel.” But it seems everyone has their own way of doing it. Some add .1 to every diamond stone swap out and others just do it on the last stone. But I’ve already sharpened 10 knives with this K03 Hunter Pro and I love it.

@bpcustomknives4392 3 ай бұрын

@@SparticesIt just comes down to user preference. As you get more comfortable with the system you will definitely develop your own style of sharpening. Your edges will get sharper and sharper as you get better and better. The key is making sure your apex is clean and adding .1 to every stone is not 100% necessary, but I can see how that would help ensure that the stones are making contact with the apex of the edge. Cheers buddy 🤙

@thebrassmonkey100 4 ай бұрын

Us guys have an indescribable affinity for quality, fitment or ergonomics. Like the way a VW beetles door shuts, deeply pleasing and is a key reminder that no matter where you're from we can all appreciate the famous German standard of "Gootentight". Not unlike how most of us use in place of a torque wrench whilst ratcheting, wrenching.....crossthreading....wrestling something into submission...you know what I'm talkin about!