Tune Up and L.E.D. headlamps install on the Mitsubishi Mighty Max... Great results!

I found out that doing a routine tune up on older vehicles like this Mitsubishi Mighty Max mini truck can come with unexpecting surprises and issues, plus swapping the oil pressure switch sensor to an oil pressure sender unit. Also installing a brand new set of L.E.D. headlamps ( headlights) which is the best upgrade mod I've done to this mini truck yet! Check out the before and after footage.
****** Products used in this Video*****
L.E.D. Headlamps 5x7 - amzn.to/2MPCzM8
Oil pressure sender unit- amzn.to/3oFwHC0
NGK spark plugs- amzn.to/3ricK6h
#MitsubishiMightyMax
#ledheadlights
#tuneup
#NGK
For sneak peak of projects and extra content,
Follow CoverAll Joe on Social @:
/ coveralljoe
/ coverall_joe
Thanks for ya'll support and Don't forget to Subscribe, Like & Share!
COVERALL OUT!
DISCLAIMER:
i) Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel so I can continue to provide you with free content!
ii) Due to factors beyond the control of CoverAll Joe, I cannot guarantee against improper use or unauthorized modifications of this information. CoverAll Joe assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. CoverAll Joe recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of CoverAll Joe, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not CoverAll Joe.

[@mi-tmacks2592]

I’ve had my ‘91 MM for about 17 years now. Love my li’l shit-n-gitter. I installed the same headlights a couple years ago, like you said, HUGE improvement. Good luck with the truck! Can’t wait to see more of what you do with it.

[@CoverAllJoe]

@Rob Vargas, That is awesome! I 💙 my mini too. Haven't owned it thatttt long but I'm so excited to get it to the point where it looks as good as it performs (somewhat LOL) and drive it anywhere! BIG planes! 😎👌

[@diyeric5072]

Next are the side markers lol thair badass bro i got a 91 isuzu pickup that im fixing up myself!

[@madisson1000]

Buena tarde me podría ayudar donde va el conector obd1

[@angiecraddock8340]

Do you need a conversion kit for these headlights to install on 1993 mitsubishi mighty max truck

[@jerrynavarro2404]

Do you need a wiring harness for those headlights or is it just plug n play ?

[@josedevicente1835]

Hey bud can you do a light rack?

[@harrylytle955]

What is name of leds

[@EslayerTM]

Did you have to do anything with the wiring harness for those new headlights so you don't have LED Flicker?

[@CoverAllJoe]

@Eslayer , no, direct plug n play! I think most of these type of L.E.D. headlamp have the resisters integrated. 🤔 Also, that I know of, only certain makes like Toyota have the headlight/warning lights circuit issues that need resisters. 🤓

[@EslayerTM]

@@CoverAllJoe oh nice thanks for the info

[@prkidd23tc]

I have issues with acceleration. Ever had that same problem? I changed catalytic converter, tps sensor, plugs wires, cleaned throttle body and nothing improved.

[@CoverAllJoe]

@prkidd23tc , its hard to say without having more info on the problem, but try these... check -fuel pressure, faulty pump or dirty fuel filter -timing, was the engine serviced recently? -vacuum leak -throttle cable, stuck, jammed or need adjustment

[@prkidd23tc]

@@CoverAllJoe we’re working our way down the list. It’s good on top end though. We’ll figure it out eventually.

[@andyj3396]

Off what year did you get the cluster from I’d love to have rpm’s on my truck

[@CoverAllJoe]

@Andy J, if I remember correctly, it was 1992 Dodge D50 Automatic. These were considered the more prestigious model compared to the MIghty Max cause it had all the extras like dash clock, better gauge cluster (rpm one) , bucket seats with center console and other little goodies! By the way, both the clock and gauge cluster were direct bolt on, plug and play! 👍🤓

[@2davydo]

@@CoverAllJoe Have been trying to find one of these for my92 MM They are really hard to find . But there are tons of the Regular Gauge Clusters on Flee Bay

[@raphaelsierra3199]

Which oil filter did you end with ...I have same problem

[@CoverAllJoe]

@Raphael Sierra , I ended up using a WIX 51381. I'm pretty sure you can cross reference it for other brands if ya want! 👍

[@Da303Rey]

What kind of spark plug wires you using

[@CoverAllJoe]

@Da303Rey , Those are NGK Wires if I'm not mistaken. 8mm I think 😅

[@marvinvelez9436]

I have a 1990

[@420SouthGate]

What kind of oil do you use??

[@CoverAllJoe]

@Cristian Aragon , I used 10w30 high mileage, even though the engine was rebuild, it the best oil weight for factory spec. 👍

[@420SouthGate]

@@CoverAllJoe Thank you!!!

[@SlickDonx510]

Why u put a sleevless outfit on. U only doin plugs.

[@tol.jayzeevlog2512]

next content pls how to intact all wires

[@CoverAllJoe]

@tol. jay zee , you mean tucking wires? hiding them ?

[@tol.jayzeevlog2512]

yes bro like clean engine bay