TUNED Pocket Bike Hits High Speeds! Pulled over With Pocket Bike

[@TREEHUGGAH1]

No tickets and fifty mph record! !! ! Wow that's a great day. Much Respect

[@jerryb1234]

My hobby is motorized-bikes, but this channel is great, thanks for sharing.

[@Douknowgregg]

My suggestion with the4 cycle pocket bike with the 2 stroke exhaust is cut the existing pipe at header and have a shop weld up some leading piping and do a duel exhaust tip. You can find exhaust canisters on eBay for cheap and then piping as well to extend off the header.

[@pokeguru3302]

Now make it go over 150+ mph because it's the Pokemon Pocketbike! Gotta pass em all!

[@hoodieboy1515]

HAHA

[@gametravelers1447]

I love this channel it helped me with my pocket bike

[@garyleeswope9599]

Yes buy the engine it's a good learning experience you'll remember for the rest of your life

[@awesomenessr6gaming739]

The chain looks a lil bit loose

[@Brendypoo]

Awesomeness Rc a little? That thing is way too loose.

[@BonFire201]

my chain wasnt that bad on my dt50mx and it still flew off and got stuck in my swinging arm

[@jaguars004]

Give this video a thumbs up for me!! What does everyone think about the 49cc idea and exhaust pipe?

[@dunnebug]

I did a quick search for the x7. Pocket Bikes Unlimited has a (Drag Race Exhaust system). I think it looks nice. Your x7 is a naked bike and the exhaust would complement it.

[@AmxDude1969]

Dylon Desbiens Sub. Delinquent exhaust

[@redneckctyboyz2977]

big gun exhaust

[@skrotis9737]

The 49cc idea sounds good!

[@jjroberge114]

Straight pipe

[@lashawnmahan1793]

When working on a pocket bike it happens. Keep doing what your doing. ✌

[@Aiden-mj6dz]

I want a pocket bike now

[@bikeandboard100]

Big gun exhausts are badass and sound good too!

[@halethewhale]

With the big bore kit have you tried porting and polishing the head mine was rough as hell with loads of casting marks. Runs way better with a polish 👍🏻

[@camomoto2544]

Rebuilding a 49cc! Awesome!

[@929cosmodude]

Hey I bought one of these for my nephew and niece, what do you think is the best bang for buck mods to the engine? Big bore kit? Carby upgrade, Reed valves? Boost bottle?

[@ClanticDM]

From my experience, big bore and carby upgrades are the go to and cause way less of a headache. Boost bottles are meh and reed valves need a lot of work to make them worth it. Proper motor prep will yield you more power than a reed valve

[@thatbikekid6410]

That chain freaked

[@tylerraines3451]

Please get an expansion tank for your setup it will make more power and you will have a peak powerband that you can tune to be at the peak of the powerband meaning you make max power

[@Olandosland]

I always love it when people say buy a real bike but truth is they are not the same. With a pocket bike or a mini bike you don’t need to do 150mph to feel like you’re going fast. 30 to 60mph on a pocket bike or mini bike is plenty and I can toss it in my car and go anywhere.

[@Eduardo_Espinoza]

50mph, that's insane! It looked like 30-40. I wonder the HP that lil engine has

[@ngk330]

Can you buy a brand new pocket bike? Like one currently sold on the market today? I dont know which ones are good or not

[@jaguars004]

Yes Ebay has them cheap

[@vs1phillip6ixx67]

Where do you buy Goodman Street which one is heat Mikuni feedback

[@dustyjacobs8359]

Do the 49cc pocket bike build

[@whitenoise763]

For the exhaust, just straight pipe it into a dual exhaust, I did it to mine, I liked so much......the reason I liked it was cuz it was loud. I would love to see it in a straight pipe dual exhaust.

[@t.sb_0570]

Totally a Leovince or an akrapovic. I have a Leovince 50cc pipe for my Apollo Orion RX50 moped and its amazing

[@chaiserogers3266]

Put a hmf on it the have the performance and it sounds good

[@rocketbunnytv716]

Yoshimura exhaust!!! It well really look good with the red and black

[@Zanemax6713]

Hey Dylan I got a pocket bike x1 which is a 49cc I really hope you do get a pocket bike like that. I have an issue is that the exhaust is really loud I can’t find a silencer

[@Syntheticham]

Oh my goodness that chain is still a tad loose, awesome bike though c:

[@jacobforrister6513]

hey, I love your video. But I am very confused. what cc is your pocket rocket bike and what stroke is it. Also what would be faster a 40cc 4 stroke or a 49cc 2 stroke? im young and don't have much money to get a good bike but I want to get the fastest bike for the money and I just wanna know also.

[@jaguars004]

This bike is 110cc 2 stroke. I would go 49cc if thats your options, they're usually pretty cheap!

[@jacobgonzalez9818]

I hava a R6 mini bike How do you take the carburetor off it runs 50mph it wont start the key wont turn . Is there any video on this kind of bike I guess ita a pocket bike its small.

[@joeestes8114]

Great video Man! Awesome information!

[@mcpandaguys7541]

I´m not an expert but that chain looks way too loose, it was wobbling like crazy when you did the high speed adjustment!

[@MrAirjordin23]

Buy a 2 stroke pocket bike cag engine. I’ve upgraded mine and I can get pass 40mph. Upgrades are cheap and they are easy to work on.

[@freddyceeclaudio9990]

Jordin Prampin what does cag mean

[@ajbillingsly9549]

Yes please do complete build from beginning to end with 49 cc

[@octaneaddiction1405]

Get a 49cc 2 stroke coolster mini dirt bike

[@juniorath43]

I've been watching your video's and you've made so much progress, keep up the good work bro. #Newsubscriber #pocketbikegang

[@GAMBINOSBELLA1]

SCREAMING EAGLE EXHAUST

[@MY3DCO]

I heard bail bonds can be worth it. Hopefully you can get crowdfunding from the subscribers. They will release your Pocketbike from the impound lot soon! 😉

[@red5xx197]

I have the same pocket bike the 4 stroke do you know how to remove the engine mines has frame underneath it so it’s harder to remove

[@miguel360kmc]

Do you like big pocket bikes ? Like the x bikes 110cc bikes. I know Honda made a few small bikes that are amazing and are not mini tiny bikes

[@attithegrape]

what kind of engine is on your X7, where did you get it and can it fit on my Cagllari

[@jaguars004]

attithegrape 125cc, only thing is the gears are hard to deal with on the tiny bikes...

[@benburch9529]

Do a rebuild with upgrades but on a cheap bike we can all afford like a CAGLLARI! Build!!!!! A CAG build would be awesome

[@tambo264]

yes buy the engine ;) be cool to see the standard top speed run acceleration vs tuned

[@benjaminsoucy2158]

I really want you to do 49cc carburetor because I just got a 49cc engine for the exact bike you have in the video

[@James01234]

I'd love to see a 49cc build

[@Gamen4Bros]

Yooo i just watched your ild vid, and now i see this

[@albertmichall5732]

Is this a 4-stroke / 2-stroke Thank you , Dylon

[@tebeardenkahboom1]

Hey kiddo, Travis Pastrana didn't make it in one 50 miles per hour test run. You just keep doing what you're doing and the people who don't like it can Bark at the Moon and kick rocks. You doing good and I learn from your mistakes which to say the least are few and far in-between in my opinion. Good job and thanks for taking the time. I would also recommend a chain tensioner on top of the chain that thing's flapping in the wind like nobody's business. I'm guessing it wouldn't flap so hard with a load on it but you know that it's going to have a premature failure at that rate.

[@justindavis7540]

I'm trying to get a fast pocket bike! That fits my size, I don't like the little ones ! I need the perfect size! I'm 13 maybe like 5'3😊 where can I get a good size bike! (Want it tall enough off the ground, like perfect size like a adult on a regular bike) where can I get one for cheap and right size? Please help

[@flamingogamingpccuandroidf5867]

Nice bike

[@Godsslave777]

How can I find a x19 Are they discontinued?

[@tonyjuniorfroberger5815]

Your bids are to good I love them can I see a rutman mini bike on one of your bids

[@lawrenceorum6030]

Thumbs up on performance

[@julianloy6749]

Pro crit t4

[@tiesundanfsboi8251]

My bike has the same break issues you may have to change the pads

[@MrAirjordin23]

Proline racing pipe if not try a jet pro tuned pipe or a fatty pipe.

[@oliverlewek5205]

What speedometer app do you use

[@davidlyons8278]

Do it... ! JUST DO IT

[@f4ygo196]

You should really buy a 49cc engine

[@MY3DCO]

Mini pit bike squad what about a 50cc???

[@johns3655]

nobble there are more available cheaper parts for 49cc chinese than 50cc brand name

[@hoodieboy1515]

@@MY3DCO is there a pocket bike facebook page? or IG!?

[@rormoxwell4077]

I have an question do U know how to weld and cut? Im a little new two the channel but starting to watch ur videos though.... U IS LIT LIKE THREE CANDLES:🕯🕯🕯!!!...

[@MarkLXIX]

you should put an Akrapoic on it

[@spencertodd8067]

Straight pipe

[@hellishgrin4604]

spencer todd No...... just no.. no motorcycle, even if it's just a pocket bike, should ever be straight pipped intensionally.

[@thegeokiller1529]

HellishGrin460 why

[@hellishgrin4604]

Thegeokiller 15 For starters, no one, and I mean NO ONE likes to hear that. Second, it's a terrible thing to do to your engine. It can result in loss of power or damaged valves (do your own research), and 9/10 it will look worse.

[@thegeokiller1529]

HellishGrin46 unless it Briggs & Stratton or eny ought engine like that

[@thegeokiller1529]

HellishGrin460 will i do like to hear it

[@000-z5n3o]

I deffiinatelly would like to see u set up a motor for racing

[@lawrenceorum2632]

Where you buy it from?

[@darrenwentzell9013]

Strait pipe and yes do the 49 cc engine build

[@ELViSLOK]

Yes buy the pocket bike engine do the build

[@Mishacrum]

Yes do that im from de Netherlands

[@Savagelaoms300]

Ima buy the QP RS-R any tips to add turbo

[@Tom-dv1gz]

Make it have 2 exhausts that would be so cool 😎

[@gilbert.743]

Rich Only has 1 Piston. Not possible.

[@pietroc.6246]

GnarlexPvP possible, not optimal

[@antonoudenhoven7573]

Get a small tool box for on the tracks 😉

[@osamabinladen320]

All it needs Now is a big, turbo lol

[@dondaluddung1700]

Yoshimura exhaust pipe 👌🏻👌🏻👌🏻

[@rubenkroes6915]

please do a complete rebuild i like that idea

[@jaguars004]

It’s going now, check the channel :)

[@abymondesir23]

Do a vid on how u wire up that light please

[@pitbikevlogs7401]

Akrapovic

[@motorlife5239]

Do a pro circuit exaust on the new bike

[@jalenmouzon9440]

Put the monster can on there might not be in budget but can u see if you can try

[@stevebarnette]

Yoshimura, if they make one. I really like my RS3 Yoshi on my 1000.

[@american0153]

Cut off the baffle come off that X7 two stroke “expansion chamber”. This way, it’ll act like a megaphone pipe, just without returning the positive reflected pressure wave.

[@hectorluismarrero5935]

Pocket bike yes

[@dunnebug]

First of all. I think the Police officer want your autograph lol. Come on man. Who doesn't know about this channel. You're DYLON DESBIENS. She was embarrassed to ask LOL. Jut teasing. 50 MPH!!! Ha. CONGRATULATIONS. That's fast lol. Maybe it's my imagination, but the exhaust sounded mean on the first fly by. I could hear a difference. You might want to put on some real racing leathers at that speed. Your Pokemon bike is all custom and great. I believe it's time for a different bike that others can relate to. By the way. maybe it's time to replace the wheel bearings if it's possible. I don't think the orginal bearings were made for 50 mph. It might give you a little more speed. Keep it up. We all appreciate your custom work. Your doing excellent!

[@BobbySonnNews]

Hell yeah bro

[@codybrock1356]

Mine was 75 buck its a race carb got it on my 196 cc gokart also

[@kalebbostelle111]

You should put a pro circuit pipe on it

[@toadinthehole8085]

What is the yellow bike called and can u buy this machine .

[@jaguars004]

No custom build its basically a razor electric kids pocket bike with a stihl cement cutting engine

[@toadinthehole8085]

@@jaguars004 cool little machine .

[@camomoto2544]

Two brothers is also good.

[@georgemillington2898]

maybe she saw your red node and thought it was rudolf the red nosed raindeer

[@thenewyorkhobbyist2931]

Do the fricken performance build pleasseee!

[@staywoke8067]

12:30 Mark - 50MPH run starts.

[@logancurran]

everyone needs a randy in their life

[@Christian-dt3wl]

where do you buy that x7

[@lawrenceorum2632]

What type if carb is that???

[@4Tay96]

Use a scotch pad next time instead of a razor. Razors have chances to gouge and wont sit properly next time. Scotch pad is rough enough to clean but not to damage.

[@kingtplayzzroblox4416]

I liked and subscribed

[@matthewtimmer9986]

nice dude

[@joerolfe7967]

run non ethenol fuel to prevent rubber getting eaten and diaphragm won't stick. S.E.F (small engine fuel)

[@joerolfe7967]

or gasket w.e it was

[@ivannovoselac3518]

Is that stihl 051?

[@Nolan320]

fmf factory 4.1 titanium with carbon tip!

[@ciaren1969]

What app is that called

[@thatbluebmw9889]

You should do shutouts for a random person who is subscribed to your channel