Turbo AWD Eagle Talon Smog / Emissions and Registration

[@marcuskask002]

God damn wear a seatbelt

[@solen1849]

Seriously they save lives

[@VelocityLabs]

Yep, I have a very bad habbit of "it's only a couple blocks away".

[@OdykKayne]

@@VelocityLabs Might want to change that habit friend, wouldn't want anything bad to happen to you, especially for the new kid's sake! As my grandfather always used to say about wearing a seatbelt..."It's the ONE time you don't and need it that matters."

[@mitsubishikid1187]

You must still be used to the 1g dsm power shoulder belt setup lol.

[@krisjk2]

I like how they spelled the make as "EGIL" on the inspection report.

[@bradfid1229]

I'm literally checking every day for a new video :(

[@VelocityLabs]

I know, sorry. Hopefully soon!

[@gregorymcwilliams7493]

It's been five months since your last upload...we want updates!

[@davidallen3158]

What happen to a new video every week?

[@MinniMoR]

So generally high NOX emissions indicate a lean running engine which may be the case since you noted that your highway mpg was 30! I'm not sure if thats normal for that car but I wouldn't think that it is. Anyway something that comes to my mind that would cause a lean run could be a stuck EGR valve letting too much exhaust back in the intake. Another reason I suspect the EGR valve would be the miss at low RPM and smooth run at high RPM because the EGR valve is only suppose to be open at high RPM and if it is stuck open it wont run good at low RPM. Hope this helps I cant wait to see what you find!

[@VelocityLabs]

Good thought! I'll add that to the list of things to check!

[@mitsubishikid1187]

yeah get the Harbor freight tube brush set and some carb cleaner and use the brass tube brushes to clean out the carbon thats in the EGR ports and the intake ports I bet there is a lot in there.

[@robg7892]

i have a 97 tsi awd, and 30 is not crazy for highway. Usually gets around 27 mixed driving. 25 if you go nuts with it.

[@gregorymcwilliams7493]

I am beyond excited about this series! Can’t wait for these to start hitting.

[@samoksner]

Nice to see you back, your content is great as always and super down to earth. Cant wait for the new series!

[@JoeWrenches]

The excitement! The drama! I was on the edge of my seat!

[@kennythemeat]

update? still alive?

[@TripleDiamonds]

Thank god I am in Florida 😂 let’s just say I went to the dmv to register her and had to get a vin check because out of state title went there with no exhaust at all 😂 +1 for no inspections here. Can’t wait to see more videos of it!

[@snowjack13]

good news ive been hanging for videos from you

[@TEAMHYBRID007]

You might want to add replace both driver and passenger door handles to your list because if they're original they are going to break there are KZbin videos out there on how to prevent them from breaking but if they're original they are toast just like most of the engine connectors under the hood

[@aarondean7643]

Love the content mate! 4g63 the world!! Big shout out from down under!!!

[@Sandman_1913]

A fellow ska fan! Dig the SL hoodie, mate! Cheers

[@BillyCiano]

Any new updates on this new project?!

[@RRPAINTBALL]

Awesome video! Miss my 2gb green talon.

[@tinyturbo317]

Plz bring the eclipse back!!! New suscriber and fellow Mitsubishi owner!!!!

[@riprob51]

I’m literally doing the same thing with my 1994 Plymouth laser RS non turbo, can’t get it past emissions , no check engine but loss of power, so I’m looking at a catalytic converter replacement, sucks because most don’t have CARB numbers smh.

[@RRPAINTBALL]

Any update on this?

[@VelocityLabs]

Soon!

[@georgmonroe3157]

When you said that you were driving it and past 4K rpm the boost falls off my 99 dsm does the same thing I can’t figure out what it is that’s making it do that it doesn’t feel like it pulls all the way through a gear

[@VelocityLabs]

When I figure it out I'll post a video. I think my issue is a boost leak, but we'll find out!

[@mikealbrailsford5438]

It's just the small turbo bud. If it's the original t25 aka t2small if you check for boost leaks and bolt on a 14b without absolutely anything else done. You will know exactly why the 14b is considered one of the best all around Street turbos for 1.8-2.4 displacement engines. It works great on my 4g and k24 Honda. Instant 10psi of boost on the Honda.

[@Hipsters_N_Hippies]

I mustache you a question.

[@Hipsters_N_Hippies]

Rear Sway Bar Upgrade on a list?

[@MojoSoRico8]

I’d like to see a boost leak test video

[@ethansadventuresWI]

It's been a long time since my county used the sniffer and rollers to test emissions. Now they just plug in and check readiness monitors. I had a catless car with an o2 fooler pass no problem what a garbage system lol.

[@daleedwards8186]

Hell yes lol love the dsm content man keep it up

[@scootertuningfl2174]

When will we get a update on the talon

[@daleedwards8186]

I have a greddy boost controller if you need one also have some other stuff

[@802Garage]

Every KZbinr needs fans like you.

[@daleedwards8186]

@@802Garage lol thanks really been contemplating on starting a channel on all my dsms but im nervous lol

[@802Garage]

@@daleedwards8186 Pffft, don't be. If you put in even marginal effort your vids will be better than most. Worst case scenario you don't get a ton of views. DSMs are hot right now. I'd love to see!

[@daleedwards8186]

@@802Garage well ill have to try it then i have 5 dsms all 1gs and a mighty max pickup i drift with im sure i can make some content lol but the talon isn't finished yet still building it

[@802Garage]

@@daleedwards8186 Duuude, that's amazing. Def want to see. Hahaha. I only have 1 DSM. My rusty 2G GSX project car. More vids coming on that soon.

[@EcBuddy123]

...I gotta get working on my 98 gsx...

[@RemedyTalon]

Dude... Love the mustache!

[@gregoryrobinson1004]

I very much enjoyed talon aka dsm content but longer than 8min maybe an 20 min video would be good . Love the talon tsi awd I myself have 95 gst but would love an awd 1st gen Laser tsi awd. Love ya video thought

[@trevorthomas6043]

In most states after 16 years they don’t put the car on the rollers

[@azeissler1987]

No video in 5 months ☹

[@corvette72778]

great choice on the car to get subs and views!!!!!!!!!

[@bradfid1229]

What happened to changing the clutch on the dsm :(

[@VelocityLabs]

Still on the to-do list!!!

[@Ty_ThatGuy]

Hey, been subscribed to your channel for a minute. Are you also on DSMTuners ?

[@swackhammer2139]

Screw smog testing, so glad I don't have to bother with that garbage.

[@stephencain3467]

same but then again my state praises deleted diesels and i dont think that will change anytime soon

[@ayyomar]

Try smogging over here in california smh

[@jtackerman28]

Updates?

[@TheRealMax77]

any updates on the talon?

[@killswizard]

I love your Dsm very clean *.*

[@FirstLast-tx3yj]

Just a question if its a mitsubishi galant 1991 with 16V engine should b a 4g63 right?

[@VelocityLabs]

Yep, should be. You can tell by the valve cover.

[@FirstLast-tx3yj]

@@VelocityLabs on stock everything and pump 93 how much should i expect? Safety is the priority

[@pyrobocaj08]

Hows the kiddo doin man? Father of 5 here.. How is life?? Hows the car? Its been a grip. We need some love too. We are kind of like your first child lol

[@alan2260]

What happened to the bug?

[@VelocityLabs]

Still working on it, check my instagram for updates instagram.com/velocity_labs

[@moparjr89]

you should be able to pull to 6k rpms before the turbo starts running out

[@epoxeclipse]

? I mean it still will pull but it won't feel much different 4k to 6k my t25 I would say doesnt really pull after 4k.

[@sdmoparmaninsd6713]

Fun fact: your state is more strict than CA... AWD cars do not go on the rollers here, just free rev at 2500 that's it... no load :)

[@TripleDiamonds]

Sdmoparman in SD hmm that’s interesting point haha learn something new everyday

[@jairodominguez7153]

I have the outlander brakes

[@VelocityLabs]

They're the best! :D

[@jairodominguez7153]

Well I have a pair sitting if you want them since I went with the 3000gt vr4 brakes

[@MichaelHelsel]

@@jairodominguez7153 You looking to get rid of them?

[@joegekko]

You need to find a partner shop that's cool with you filming.

[@boosted2.4_sky]

I have an Aeromotive 340 fuel pump kit (E85 compatible) I'll donate to the cause....I ended up not using it in my build..... it's just been sitting brand new in the box....

[@802Garage]

What a champion!

[@boosted2.4_sky]

I looked in the description and don't see an address... let me know where to send it and I'll kick it out to ya.... 👍

[@VelocityLabs]

Sweet thanks!!!!!!

[@boosted2.4_sky]

@@VelocityLabs you bet... 🍺

[@rogertheexplorer4347]

@@802Garage oh lol wassup 802

[@DSMDally]

more vids please

[@azeissler1987]

Colorado has an odd smog check. CA doesn't have a dyno looking smog

[@cesarbaca100]

Bro , I just bought a 99 eclipse gsx supposedly 6 bolt block supposedly built motor supposedly fresh rebuild, Come help me bro, Iam stuck idk what I have I feel like I do have a 6 bolt but idk what Head I have

[@RallyLancer95]

B R O

[@cesarbaca100]

Tim Beck yeah?

[@robg7892]

web.archive.org/web/20080408092728/www.dsm.org/

[@redeclipzegsx]

Would you ever sell your gsx?

[@VelocityLabs]

Not a chance!

[@2005henson]

You should of said my olady needs comfort on where I am

[@TheJohnnyLucasFilmHouse]

Wow they still use the Dyno 😂

[@stevenplaskett7728]

Channels dead

[@naptownsfinest2345]

sadface