Turbo Install on my 1300cc swapped quad! part 2

[@VasilyBuilds]

Stop data brokers from exposing your personal information. Go to my sponsor aura.com/Vasily to get a 14-day free trial and see how much of yours is being sold.

[@chadcarrico5562]

Dude you need to build a drag car!!!

[@AndyBee90]

Yeah defo needs a boost in power 😂😅

[@J2A61]

You should start selling this stuff as a kit branded by you. You’d make a killing. Everything thing would be on back order 😂

[@DAlchemista7474]

dang I need u to put my engine in

[@its_trolll8533]

So I have a yfz450r I bought unfinished swap with a gsxr750 engine I got it wrapped up but I’m having issues with chain slip or jumping I don’t know. I used the engine mounts they made but asking about engine sprocket alignment with swing arm bolt. Mine is above about an inch or so but it’s dead center with rear sprocket my question is would that cause a problem ? Should I lower the engine to be center with swing arm bolt ? I would be loosing ground clearance but if it’s needs to be that way I guess there’s no way around it. Thank you I await your response.

[@benmiller5015]

Well I'd definitely say that the Hayabusa swapped raptor 700 absolutely needs a turbo on it even before its fully finished being swapped lol. You built it man, now you gotta be the one to send it lol

[@maxdragon15]

1 million subs by July... BOOK IT!

[@jeffreybentz7097]

Helluva good job on that 4 into 1 manifold ! ! ! I know fabing something like that up can be frustrating and time consuming but well worth it when the finished product looks as good as yours. 👍👍

[@jLkm897]

He is good at fabricating. I have been building turbo cars and making merge collectors is always a bit tricky. Especially 6 to 1 collectors and whole manifold is always a bit complicated but very rewarding to build.

[@jamesd.george7439]

I've watched Vasily's channel from almost day one. His fabrication skills have come on in leaps and bounds. Some of his welding work looks like something from a high end production shop. Well done Vasily and keep up the good work. By the way he's also a very humble young man. God bless.

[@markturner2646]

Been following you since you looked like you were 12 lol it's been awesome to watch you grow as a builder and fabricator. Keep up the great work 😅😅🎉🎉

[@winstonpratt604]

Ive been watching for years and i feel like you are truly gaining all the knowledge needed to be a master Fabricator for a living 💯

[@namtech425]

Here's a tip, when loosening those axl nuts, put a jack stand under the axl end so you have more leverage and it won't tip over, also apply downforce don't try and pull - never works. Trust me we live at the coast and I deal with this on all my quads when doing maintenance. In my opinion a turbo is way overkill for this but I do get why you are doing this. You are a master welder at your age, it took me more than 30years to learn the craft and I am only a diy-er. Always enjoy your content man.

[@bensimpson8467]

Bro I lost track of you and your channel. I haven’t seen your stuff In a min. You have come so far. Congrats bro. The welds are so much better than I remember. Keep it up my fren

[@teeslunk]

Great Job with the exhaust and all that welding. 👍

[@joeyrutherford1790]

Make a trailer for the city car for the Hayabusa 4 wheeler. That would be boss 😎 🙌

[@DoubleA3015]

I’m old already, lived over half my life. I’ll ride anything with a motor and tires, so sign me up young man 😂

[@All-Sgood]

Got some tungsten inclusions in the turbo manifold when your electrode got stuck a couple of times. Didn’t look like an easy job getting in there like you said though. Look up welding back stepping. It helps reduce distortion. Your start stops are creating weak points also when you follow the weld direction

[@hydealmen5280]

You are the big balled man to test it

[@Krb69]

Let Evan from Cboys rip it, he can ride anything and make it look so easy

[@brianramsey4097]

Your video my friend or spot on the background music that you choose fits your channel perfectly you're fabrication is absolutely beautiful your ability to create what your mind sees is absolutely a wonderful and a pleasure to watch I truly look forward to each and every one of your videos thank you for sharing

[@VasilyBuilds]

Thanks!

[@kupertempleton7551]

Love this build man!

[@BIGFESH]

Only one man that should be testing this monster.... SFJ. 🍻🍻🍻🍻🤘🤘🤘

[@joesilvasr9733]

Vasilly, your design, fab, and welding skills are darn impressive 👍

[@kohan2901]

Same thoughts here. Very impressed with your exhaust fabrication in the shed

[@kraftcraft2934]

Your work is much much better than I been seeing great job

[@Shadow0fd3ath24]

As someone whos rode a turbo busa and loves yamaha quads, and who dailys a 190whp 410lb bike....id GLADLY test this thing lmao

[@raybeaudry463]

I love that you put even small silly type mistakes in your videos. For me it makes your channel more relatable keep doing what you do 👍💯

[@michaelbarbera4923]

Bad ass machine buddy! I’ve been watching you for years, awesome to watch your skills being honed!

[@jLkm897]

Beautiful and good job on that manifold. Collectors are tricky to build especially 6 to 1.

[@GarageBoundLLC]

Great video. Thanks for including us!

[@72mmALKYDRAGGIN]

I will do it! I’ve got ALOT of different heights and paddle count (12’s to 18’s) extremes 7/8 tall stag and straight and everything between mounted on wheels and a “Dyno Jet “load cell” Dyno,”we can strap it down to see what the REAL NUMBERS it pushes! I also run 2qty lone star chassis banshee drag bikes! So we can race them together

[@smokybandit9333]

I miss being in the same neighborhood as vasily and as a kid couldn’t wait till he had a new build to rip down the street. I remember this one day when I was playing Xbox and I was just waiting for the sound of the Chinese go kart turned sxs so I could peek out the blinds and see his beautiful build and to see what mods he had done to it. Then I would just wait for the yt vid to show up. I got to brag to all my friends that the best ytber lived in my neighborhood😂

[@toxicwest6673]

yo basilli put a blanket on it also so it doest melt the plastic 😊

[@karlvanboxel561]

Apparently u can go online and put in the details of the cut u need to make for the pipe angles and other info and it’ll print u out a paper template that u wrap around the pipe then trace around it to get your cut line. Prob a small charge but make life easier for u

[@spdy3926]

OMG the pipe work and welding. Your killin' it bro. 👍

[@jasonhovey815]

Look into the hulk bender from swag off-road Turbo kit looks killer

[@tomrynkewicz7674]

Your builds are crazy! You've got some mad fabricating and welding skills! I could use you as a neighbor! LoL I look forward to your upcoming videos.

[@russellpollard6075]

Ill send it for you! enjoy watching your builds evolve and mature. Keep it coming.

[@theproudONE92]

Damn bro your work is getting insane

[@chrismoen3980]

u sure make look so simple - when u get you - citicar going that thing going badass

[@otiseatmon9705]

I would absolutely be honored to test drive that bad boy. As far as resume goes. I’m a Canadian Veteran who’s not able to find a good adrenaline boost these days. I think that machine could do it for me.

[@xpndblhero5170]

Every single Vasily Builds video is him redoing what he didn't like in the last video.... And apparently I'm here for it. 😁😂👍

[@Tmanstomp100]

This build looks amazing bro, if anything that engine swap and those welds is a great showpeice

[@CementSmokeR1]

Once it’s all buttoned up make sure you safety wire those clamps after you torque them. At least that’s what we do on our equipment in the Air Force

[@dandansdetailing9755]

If I could find a weekend that I could schedule it I wouldn't mind making a trip to come out and seeing how it rides and try and help you get some content. I raced motocross when I was younger and I've rode raptors, I've been on a hybusa but never what you have built there so I think it would be a uniqueexperience. It also looks like you try to take the time to build things right as well.

[@stoichiometry147]

Your skills are becoming next level. Good job.

[@Svge207]

Dude at this point boost the world my guy

[@Rusty_39]

Nice video! I'm sure you're well aware but make sure you have good ventilation when welding or back-purging a lot. Asphyxiation can creep up on you unexpectedly.

[@VasilyBuilds]

Good call!

[@Rondawwg]

I can’t friggin wait to see the first ride!!

[@nedguy9220]

u have it wrong about the laser welding its going to take over .. u watch and see .. i see your work and u will take it on and never look back with more and more upgrades to the process ..give it a year or 2 its moving fast .. good work and u are dedicated 👍

[@wogelkrafts]

Adding moist sand helps, and plugging the ends should help significantly if you didn't do it that way already :)

[@VasilyBuilds]

Yes I did both of that even compacted with a hammer 😔

[@JacksonOffroad25]

I’ll test ride it lol 😂 seems like the perfect amount of fun and that “oh this is how I die” feeling lol 😂

[@KaseysYouTubeChannel]

This quad is absolutely horrifying.... But also looks like the biggest adrenaline rush with handlebars😂🙏🙏🙏

[@mchevownr]

Really awesome content! I can’t wait to see how it ends up!!

[@lukecombs5242]

Cool build but I would not mud or even woods ride it with that filter there to suck in water and mud but I know you know this already but nevertheless awesome whip 👍

[@johnberryhill5400]

Awesome build!

[@Diesel1974]

Good welding..nice welds

[@g0ldensample21]

You did a fantastic job. Keep up the good work.

[@josephmiranda4270]

That’s bad ass bro keep up the go to work love watching your videos

[@lilshagunna]

Test ride 👀 I’ll definitely accept that offer 🕺🏾

[@bighomieJ5X]

Vasily keep up the great content, preciate it .

[@louisbeaver87]

@VasilyBuild it might fit up better if you raised the turbo up a little higher, where there's a little more room and more support for the turbo

[@freddyrosario23]

N/A Busa swapped raptor is crazy… imagine a TURBO BUSA swaped raptor 🤣🤣🤣

[@Shadowz_660R]

Awesome Job bro this thing is going to be insane

[@JonnyRides]

That’s awesome keep the vids coming 💪💪

[@rangerddanger697]

Wow that looks amazing can't wait to see it when it's ready to test drive 👍

[@darrellroeters4951]

Nice welding need a bumper in front of turbo

[@Homemade1970]

Yo vasily your a amazing fabricator, bro keep up the good work👍👍👍👍

[@kyleshelton1636]

Looking forward to the next video on this!

[@chathamguy1able]

wow that will wake up that yamaha frame great video like always

[@sskevlar]

I've got the kahones for the test ride. Lmk. Would be sick 😂

[@averyanderson6945]

Even from the cboys should be the one to test drive it 😂

[@Meredithsmayhem]

Sound effects at the end 😂

[@kckustomwelding]

Wow this thing is going to be scary!!! Great work on the pipes and the swingarm!!! Did you raise the block to lower compression on that motor and what are you running for a ecm?

[@mathewwiland9809]

That is awesome!! Love your work bro

[@jeremy7923]

Hey, how much gas flow are you using with that big cup and wicked stick-out?

[@VasilyBuilds]

30-35 cfh

[@jeremy7923]

@VasilyBuilds thanks! Great Channel bud.

[@viliryynanen8655]

You need intake pipe bike to air get on engine

[@zazashane420]

i would love to test out that machine ive ridden yamahas all my life raptors,yz,r6,r1

[@michaelnewton-1989]

Man this is bad ass! Teenage me dreams right here! Haha 😂

[@xXCoyoteXx2701]

I was looking around to see if someone has done it and I found your channel I want to do it as well but no turbo at least not at the beginning I want to make a road legal raptor with the hayabusa engine. I currently own a gen 2 hayabusa. I was inspired by a different channel that does a lot of road legal raptor with engine swaps but somehow they haven’t done a hayabusa engine.

[@its_trolll8533]

So I have a yfz450r I bought unfinished swap with a gsxr750 engine I got it wrapped up but I’m having issues with chain slip or jumping I don’t know. I used the engine mounts they made but asking about engine sprocket alignment with swing arm bolt. Mine is above about an inch or so but it’s dead center with rear sprocket my question is would that cause a problem ? Should I lower the engine to be center with swing arm bolt ? I would be loosing ground clearance but if it’s needs to be that way I guess there’s no way around it. Thank you I await your response.

[@lonewolf56308]

Your work is fantastic. I love it!

[@kareemhill1318]

I would most definitely love to send it I'm from the country and love to go fast an love your channel

[@shawnmarks1400]

That's my dream quad right there

[@g5automechanic_builder742]

Where can I sign up at to take this bad machines out for a test drive. What track your goin to be at?

[@GatlinRuddick]

I’ll ride it 100% that would be the best thing ever bro

[@nicksmithwestaustralianbee5139]

Awesome job dude

[@DanielBall]

Another great video well done.

[@denverstone82]

Fly me out to you, I got years of experience riding and racing, I got the balls to test ride it for ya.

[@Ironheartbart]

I got a 130hp brand new fully custom ktm duke890r quad 🤪🤪 this is going to be nuts 😂

[@AndyBee90]

Dude are you even human or a god of the metals

[@AndyBee90]

Dam if I was in states I’d full send that thing

[@bobmanzi7712]

great stuff dude thanks

[@shanethompson7543]

Badass 4-wheeler

[@droppinghertz9922]

We're do I sign up when u come up to see fast John im not far from their in Amish paradise lol

[@Motorheadco]

You wild 😂

[@Be4tJumper]

I missed the musical welder on this episode 😔

[@andybaker5787]

Keep up the amazing work

[@Mac181]

I can’t wait to see it rip

[@ragingdragonfn]

What size turbo should I get for my 650 vtwin quad

[@VasilyBuilds]

Gt12

[@coopdoesit7442]

Shit I'll test it out for you I'm close to Chattanooga over 25 years riding experience and have own well over 200 atvs in the last 20 years!!

[@danlaprell9273]

When are we getting a Atc250r video ? I love the content

[@VasilyBuilds]

Possibly in 1 week

[@LifeWideOpen780]

Ur fab work is top notch

[@shanethompson7543]

Badass 4 wheeler

[@rammiller5114]

1000% Evan from Cboys got the balls