Turbo LS Truck Goes From A Little Ebay Turbo...To A Big One!

[@100pyatt]

Loving this build! This is the exact type of little truck that I want to run around with basic but spicy !!

[@benbush5183]

Love that caliper kit man, good looks on the whole build.

[@bowtieenthusiast6672]

thanks bud got some time again now gonna start posting again and get back to the build!

[@sourtirez]

Love the build man!

[@bowtieenthusiast6672]

Thank you!!! Gonna have more driving video soon!

[@alexispazos7432]

What wheels n tires are those

[@hoodraisedperformanc]

Can you give me the link to that new turbo, clean ass build

[@bowtieenthusiast6672]

Thanks!! www.amazon.com/dp/B09FPKZBW6?ref_=pe_2409890_445922140

[@tristinlowe2797]

ole 5.3 baby

[@bowtieenthusiast6672]

Swapped in a 6.0! Truck was actually a v6

[@CornerOfTheOval]

@@bowtieenthusiast6672 LY6 or L96? or AFM equipped block / GEN3 block? Been trying to learn about LS's recently. Did you keep the 4L60e in there? Upgraded? Stock rear diff?

[@bowtieenthusiast6672]

@@CornerOfTheOval this is actually an LQ9, older gen 6.0 than the ones you mentioned. This is out of a 2004 Escalade, referred to as a gen 3.5 no afm. Higher compression than the regular 6.0 LQ4 of the same generation, swapped a rebuilt 4l80, and a yellow spring limited slip diff from jegs

[@CornerOfTheOval]

@@bowtieenthusiast6672 thanks a bunch for the reply, so does this mean that the block has the gen 4 pistons and head bolts? I had heard about these "kinda gen 4" engines and seems like you have one here haha

[@bowtieenthusiast6672]

@@CornerOfTheOval correct the 04+ LQ9 has gen 4 rods with floating wrist pins and flat top pistons for more compression,also the newer head bolt design where they are same length

[@TaylorMadejdm1975]

This needs a grill but other than that nice sleeper..🍺

[@bowtieenthusiast6672]

Thanks! I just finished the hood latch / intercooler bracket so I've got the grill back on now just gotta get a video out! You can see it briefly in this short kzbin.infoiMULaypXyBk

[@Itsolivera]

Amazon link for rims ? 🤟🏽🔥

[@bowtieenthusiast6672]

Fronts: www.amazon.com/dp/B00R93VUIM?ref_=pe_2409890_445922140 Rears: they are 15 inch you would need conversion to run, also would recommend a different offset these stick out further than needed, just what was available 👍 www.amazon.com/dp/B00R943KGG?ref_=pe_2409890_445922140

[@tehweaver4553]

Editing and content quality is really really damn impressive for 162 subs dude keep it up

[@bowtieenthusiast6672]

Thank you so much!

[@misaelmorales2378]

What are does rear break call can you give me the link 🙏

[@bowtieenthusiast6672]

Here's the link to the dual caliper kit they also offer a single! 1320wheels-com.3dcartstores.com/99-SilveradoSierra-Rear-DUAL-CALIPER-Brake-Brackets-PAIR_p_110827.html

[@veraproject7060]

what is your wheel setup? Nice build! 🔥

[@bowtieenthusiast6672]

Thanks! Wheels are American racing ar172. Front tires are just 16-in all seasons and rears are Mickey Thompson ET Street S/S 295/65R15 with a -19mm offset which is way more than needed but the only offset I could find in that wheel size. Running 15s in the rear with 1320 wheels brake conversion!

[@Ramzjerknsk8]

What rear tire setup

[@bowtieenthusiast6672]

Tire is a Mickey Thompson ET Street S/S 295/65R15 with a -19mm offset wheel from amazon (American) racing which is way more than needed but the only offset I could find in that wheel size. Running 15s in the rear with 1320 wheels brake conversion! basically a billet caliper bracket with brakes from the 90s trucks

[@turbosupra2jzdragracingtob249]

Your 6870 had wrong AR ratio. .70 is for a small 4 cylinder

[@bowtieenthusiast6672]

Yeah it’s just what comes with the generic truck turbo kit from China lol, figured I’d give it a shot. Probably wouldn’t be bad on a 4.8!

[@auto3garage522]

🔥🔥