Turning a $50 set of wheels into a $500 set of wheels

Today I customized a set of wheels and made them look more up to date modern and really expensive!
➡️ Watch me do stuff like this everyday here: / mad4motors
Complete guide on how to spray paint and Repair Damage on your car using only rattle cans giving a excellent finish!
Turning a $100 set of wheels into a $1000 set of wheels: Here • Turning a $100 set of ...
My other wheel repair and paint video with 10 million views! Here: www.youtube.com/watch?v=FF_-J...
The bumper is the most common area to damage on your car and I show you how you can do it yourself!
Products used:
Clearcoat aerosol- amzn.to/2ANeEUJ
Primer Aersosol- amzn.to/2DctNR7
Sandpaper assortment- amzn.to/2RSrcUg
Masking Tape- amzn.to/2RLsZuy
Tack cloth- amzn.to/2RK60jv
Body Filler Bondo amzn.to/2Mai48q
My Camera and gear
Canon Eos Camera -amzn.to/315aKSE
Sturdy Tripod -amzn.to/2Wm4erX
50mm Stm Lens -amzn.to/2HUCgut
Timelapse iphone 8 -amzn.to/2WPEvrn
Phone Tripod -amzn.to/3183gxW
Camera Bag -amzn.to/2JTPh9V
How to Repair Alloy wheel Rims- www.youtube.com/watch?v=ALzC_...
Connect with me:
Facebook- / mad4motors
Instagram- / mad4motors
Disclaimer:
Due to factors beyond the control of Mad4Motors, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Mad4Motors assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Mad4Motors, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Mad4Motors.

[@Mad4Motors_]

Hey Guys! I've just done a similar video this time with a CAR! Check it Here👉 kzbin.info/www/bejne/ooXKfX-coZmGbNk

[@declantwomey7525]

ST 170 💪🏻🇮🇪👍🏻☘️☘️☘️

[@toosorry2care]

I see, trying to highjack his video.......

[@benreaper9087]

Lmfao

[@EastTheBeast911]

Looks great, I'm trying to feel comfortable to tackle my own wheels.

[@iseyserolf8893]

how long does this paint normally last? is it ok for use in winter/snow?

[@taylordoleman8787]

“Mum I want Audi Rotas” “We have them at home son” *audi rotas at home*

[@esoteric_chaos]

Better than Mac Donald’s ? 😂🤘

[@kirknorris9654]

I’m not the only one that thought this 😂

[@leothelion2001]

I didn't know that McGregor was so skilled when comes to painting rusty wheels lol

[@Mad4Motors_]

You know it brother

[@n0wsinn]

i don't hear it

[@erikp6766]

Not rusty they're aluminum. It doesn't rust

[@joshuacarlin1427]

Clearly this is Colin Farrell

[@johnnyretro182]

Alloys n rust 🤔

[@kingmanarizona2661]

I had a neighbor who somehow turned his stock wheels into $2000 wheels overnight. Of course on that same morning, some chap woke up with his $2000 wheels turned into wheel hubs.

[@deletedaccount6663]

🤣🤣🤣

[@dvader3000]

What?

[@Anky07]

@@dvader3000 he’s saying that his neighbour robbed someone else’s wheels

[@kevincarter7102]

It's nice when I can watch a video and know this person is NOT an idiot.... thank you for not wasting our time with nonsense. Just the facts. Great job. Much needed info...!!

[@user-rb1yf4he9q]

Sounds like he should be doing this with a pint in his hand!

[@estlhm805]

😂😂😂😂

[@HardtoHandleThisFella]

Of coarse he does, thats the only way to do it!

[@edgarbleikur1929]

Point

[@patrickhayes3099]

how do you know there is not one at arm's length? More than one, lines might get wonky.

[@HardtoHandleThisFella]

@@patrickhayes3099 you have a really good point there!

[@Jason-ws3sf]

I thought the design would be naff at first but they actually look proper smart 👍

[@ollielappage7775]

Same as what I thought

[@daireconnolly1997]

they’re pretty much ttrs alloys

[@brunosoltoo]

when you finished the wheels I thought that the car would look horrible with them, but when you put them in the car it looked awesome! Great job

[@derekwaffles]

Until you get within 6 feet of the car that is.

[@FranciscoSilva-jg1ye]

Também achei isso bruno

[@sfeddie1]

One thing that wasn’t shown or mentioned is that if you use a design like the arrowhead (that has a point on one side) you can’t make all four wheels the same. Two of the wheels need to have the points go in one direction, the other two wheels in the other direction. If you don’t, then the two wheels one one side of the car will have the points pointing towards the front and the other side will have them pointing towards the rear. Notice the left side of the car wasn’t shown.

[@Fvt_Fvt]

Eye off the tiger 👀

[@sfeddie1]

Tomaszenko, I took a look at the Audi rotors and you are correct. They are similar, and all four the same. I guess it’s just personal preference as to how one wants them to look on the car. For me, I prefer symmetry. Could be because I’m a Virgo? 🤪

[@hatorihanso1238]

That is the same problem that rims have on some cars, that they face backwards at one side, just some details that irritate me. Just check out the new electrical Audi , it strange the designers don’t think about it.

[@SkodaHobbybob]

No shit Sherlock!

[@sfeddie1]

Bram Meaning what? You thought I was stating the obvious?

[@R0cketRed]

You deserve some sort of recognition for being the FIRST out of dozens of videos I've watched on painting wheels that mentions a respirator. 👍

[@murraykriner9425]

Great content for the DIY'er who doesn't have a Grand or Two to spend on their rims. Really prefer to put the hard cash into the bits that matter most like the brakes, drivetrain, or suspension where it really matters most. Liked that you stuck to a basic design and didn't lose sight of the purpose. Thanks again. Very best wishes.

[@richieforthewin1422]

I didn’t like the design when you were showing the wheels off the car but once you put them on I honestly changed my mind

[@joaomarcelolopes6243]

Same here, such a big difference when they are on the car.

[@floob247]

I still don't like the design lol. Either way, it looks loads better than it did before. Great video! 👍

[@markjamestufigno2432]

@@joaomarcelolopes6243 ŕ

[@mcflyboarder9537]

Richieforthewin 1 I agree, the end result was surprisingly slick looking

[@khamsinshamal7988]

Richieforthewin 1 My thought also. 👍🏼😊

[@misfit0865]

Great job there. Looks real good. Thanks for the how to. Now its time to go buy a set and try it out myself.

[@paulyoung4781]

Wow absolutely beautiful I'm a painter I do guitars I'm gonna do my wheels now thanks love it

[@jorgemabarak7932]

Guitar painting is incredible! I want to learn

[@351cleavland]

I once turned a $75 set of wheels into a $42.50 set of wheels.... Note: I am a poor Craigslist negotiator.

[@estlhm805]

😲😂😂😂

[@j.a.r.family2576]

This shit cracked me up

[@kabelomaake4894]

🤣🤣🤣🤣🤣

[@johnharrison5098]

🤣👀

[@battlextestedx7951]

😂😂😂😂😂😂😂

[@TheRealMrCods]

There is no comparison Mate, The new ones are much nicer, what a cracken job 👍

[@thegodparents9621]

Had my doubts at first with that design, then I saw it on the car. Banging job man!

[@debrahhansen6679]

I love your creativity! Thank you for sharing your skills to the world sir.

[@CNCChazz]

I didn’t want to like this but I was pleasantly surprised those wheels look really good on that car. Great job

[@bigdana]

wow fantastic as i have four sets of rims that are in need of this process.... now i know how to start it :) Very clear and appropriately edited with good speed to follow steps.

[@tipptop9]

Good to see you uploading again M4M! 🇮🇪

[@skodakatie7341]

Great wheel refurbishment, love the design too!!.

[@coleanc]

I have done that as well on a 2020 Camry XSE. Painted them completely black and the calipers red. Upgraded the appearance 1000%

[@Change4ADollar]

6:53 Hostess cupcakes....

[@mofsmr2]

These look amazing my man! YES you have inspired me to go ahead and give it a go, I have a black TT with stand rims on, but I'm going to spray them like you have! they look stunning!

[@northwestrockgem9745]

My 2000 TT is silver..I have to bough it out it would look so nice! And of course make it look like its attending a funeral

[@tonigags808]

You make it look so easy mate, I’ve scuffed my wheels and was going to get them refurbished. Now I’m going to try and do them myself , thanks for the videos and I’m going to learn by watching you. PS I also want to by a van and give it a go at turning it into a Camper, wish me luck everyone😊😎

[@bando8345]

good luck bro

[@davot.9717]

Very inspirational bro I have a 1997 Toyota 4Runner with the stock wheels on it going to use your method to see how it goes I want them to look nice but at the same time not too loud thank you again be blessed

[@TheShinyShow]

Looks well considering the price. Much better than the casters on before.

[@TheCowgirlNiamh]

Great job as always! I wasn’t so sure about them but they really transform the car! 👍

[@richardkelly19]

Bro, those rims look wickeddddd. I honestly didn't think it would look so good. I was like woooooohhhhh

[@kctsp6631]

You did a great job on those rims, they look beautiful on the car. I need to do mine but don't know when that will be, lol. Great video and thank you for sharing.

[@kennethjanczak4900]

Thanks for taking the time to make the video and share it 😊

[@raymondtuckerjr1886]

Excellent design and execution. By far, the best wheel refurbish I've seen. Thanks for your content.....made me a subscriber.

[@philliparthur8672]

Not a fan of black rims but this matches. Looks like the tire version of the grill, black with silver. Looks real nice.

[@nikitamckeever5403]

Got the wheels to do on my Jaguar S Type and I was going to do them just one colour , but now thanks to you I think I’ll experiment . Great inspiration 👍🍀🙏

[@blastossreeves1017]

You are a champion! 😲 No need to even clean the rims (while they are removed 😑😑) And no need to change the tires either, which have been dead for 4 years ... You have redone my evening😂😭😭🤣🤣

[@Mr._Lister_The_Sister_Phister]

Fishing line or dental floss will help when it comes to removing those fragile emblems on the center caps. Just floss it between the emblem and whatever it's attached to. A heat gun (blow-dryer can be used as well) will make the task even easier, as it will soften up the adhesive.

[@daysrays3987]

dam that did make a big difference, i was skeptical at first lol

[@B0RRAC0]

Whoa! Amazing job!!! Such a difference the new wheels made also!!! 👍🏼

[@troutjerky3489]

Just painted my neighbors wheels as a thank you for all the Cadillac converters iv stolen from him over the years! Thanks for the idea

[@michaelc857]

Not crazy about the design, but still an improvement over the other wheels.

[@sobrumal8218]

All the proper wheel repair guys are watching this like "nooooooooo!"

[@devlinclancy9597]

awesome job! thanks for the tips! ill be doing this on my truck!

[@pablo123b]

love your videos thx so much for taking the time to make them for us!!!! stay safe

[@kjprice1443]

The only issue is that because of the spear head design they are now directional, so you have to bear that in mind when rotating the wheels.

[@johncoops6897]

The wheels always rotate... that's the whole point of them.. If you think that you need to rotate your tyres to "even out the wear", then you should get a wheel alignment that will make your tyres wear evenly.

[@jonbaker3865]

@@johncoops6897 dumbest comment award goes to this guy today

[@johncoops6897]

@@jonbaker3865 - I have edited the comment to make it easier to understand. The message is the same.

[@jonnylawrence5699]

@@johncoops6897 An alignment doesn't change which wheels are driving the car. The driven wheels' tyres are gonna wear much much faster and therefore may need to be rotated.

[@johncoops6897]

Yeah, but rotating the tyres on the driven wheels won't make them last longer.... in fact, it probably makes them wear faster since the moved tyre needs to "wear in" to it's new position (eg: feathering of the leading edge on tread blocks of driven wheels). Stop and think about it - in what way could rotating of tyres possibly make them last longer? They wear as they wear! So if the driven wheel's tyres are wearing much faster, then simply replace those TWO tyres when required. The main reason that tyre manufacturers suggest rotation is because then they can sell you 4 new tyres at a time. For the consumer, it simply mean a larger upfront purchase instead of just replacing pairs of tyres as needed. Also, you waste time and money going to the tyre place for unnecessary labour costs that achieve absolutely nothing..

[@tofeeq1116]

As a 15 year old that’s learning bodywork. This was really helpful. ❗️⭕️

[@mikhailreitotanes5426]

Really great job man. Was planning on painting my wheels too. This is really great help. Thanks

[@briromolor21]

At first I thought what you think your doing with black, I see now that you shared this I'm now looking at my infiniti wheels perhaps about the same color with a different style. Thanks buddy for a great idea

[@eriklona8806]

I hate youtube because it looks like this took you 10 minutes and I really want to do it now, but I know for a fact it's going to take me atleast 6 hrs the first day, and 3 hours the next day 😂 my attention to detail exceeds my patience and steadiness when it comes to painting lol

[@anonimoporsiempre6033]

GOOD THINGS COST IN LIFE 😈

[@TJO1733]

problem you have is that you are too slow, just look how fast his working. he works so fast that even camera does not always catch him, thus the jumping.

[@marquisethomas5611]

Finally a good video from this channel, even tho these closely resemble stock audi rims this is still a good mod

[@SHOdown13]

Turned out better than I expected. Job well done. Now I have to look closer to my wheels to see what I can do to them.

[@leonrichard7105]

Wow! Huge difference for the better. I can't tell you how many wheels I've had curbrashed and ended up letting them go for cheap. People buying used rims will mercilessly beat you down in price. (There are no wheel repair shops around here.) A guy like you would have made several hundred profit off my blemished wheels. Good job!

[@Mannychulo485]

Would have loved to see those wheels spinning on the road

[@NemonicsRacing]

Just press pause & spin your phone. Problem solved.... (I'll be right here if you need any more lifehacks.)

[@wottusay3247]

True title: Turning a $50 set of wheels into a $500 set of wheels *using 200 worth of materials*

[@anxiousmindmusic]

as opposed to by magic

[@NemonicsRacing]

And it would have cost you $0.00 to not say anything ignorant, yet... here we are! It won't even take 200 to do that same job 3x.

[@wottusay3247]

@@NemonicsRacing One day you will be an adult and you will understand.

[@NemonicsRacing]

@@wottusay3247 maybe one day you will be smart enough to be able to do simple tasks for a reasonably price... dick

[@denisahmetovic8427]

@@NemonicsRacing exactly

[@johnr8013]

Amazing work! Spray can job I've ever seen! Better than a lot of people with professional equipment too... Lol!

[@johnnyvw8230]

Made the car look completely different job. Really impressive work!

[@simpleman8883]

They’re supposed to resemble the Audi TT Rs wheels.

[@CustomTO]

Or just buy Audi Rotors... :D

[@wokeupandsmellthecoffee214]

Superb job as always, loving your channel thanks 🙏 ☘️

[@kaihouston5488]

Really enjoyed the video great work. Also loved that it sounded like you filmed it on craggy island 🙂

[@voodoo1449]

Ah, no...they are still a set of $50 wheels.....YOU CAN'T POLISH A TURD

[@siopowar]

What do you know about turd polishing pal?

[@voodoo1449]

@@siopowar you watched the same video I did didn't you? Those wheels are shit, so YOU CAN'T POLISH A TURD

[@th0r34ux9]

That's exactly what I told your mother

[@voodoo1449]

@@th0r34ux9 You told my mom you can't take a set of $50 TURD wheels and polish them into something better?? She already knew that

[@siopowar]

@@voodoo1449 on behalf of the entire turd polishing community, I declare you don't know what youre talking about.

[@rickylopez8392]

They still look like $50 wheels If not they look even cheaper now

[@jamesnagle2226]

Great job brother, thanks for showing is the way.

[@williammoore7419]

Awsome job looks so diffrent makes the car look completely diffrent, a need to do my wheels now

[@Breaddc2]

Can everyone stop painting their wheels black. They're manky.

[@bigsmoke2621]

No

[@mushlove6933]

It has its place. Let others do it so our bronze and gold wheels look better ;)

[@MrMrBurnablunt]

Yes I need some help deciding how to fix and paint the new Cameron rims that I want to pint and fix to put on my 98 chevy 2door wight truck.. Can you help maybe with some advice and idea's

[@erickeane471]

Great work man! Im doing something similar at the mo but hydrodipping instead.

[@mattwernecke2342]

Just found your channel. Really well done!

[@lauwe54]

Thanks for your time.great video

[@TonyStone3000]

Good job man!!! One of the coolest vids I've seen in a while.

[@adamsdailydriveway]

So mcgregor stopped fighting and starting refinishing wheels!!?? Awesome!!! Lol good work

[@u700495]

Same... Thought there's no way that would look good.... Then. Boom the black is banging. 👏

[@dirtybath7317]

YES YES YES!! Top Video!!! Gonna give it a shot. Cheers!!!

[@th0r34ux9]

Bro you are literally like the Bob Ross of Auto Body. You are the Wizard.

[@PadmaDorjee]

You give a lot of inspiration to mundane people like myself to get up and do cool stuff. THANK YOU

[@martinsteele3259]

Been waiting for your latest video! Great vid. After you wet sanded the primer what do you use to clean off the water marks?

[@robertcollins7034]

Great job bro the wheels look awesome :)

[@kevinkev1530]

Tht came out really good, thx for the tips

[@bradbullen2099]

Enjoyed the video mate. Thanks a lot!

[@Yusuf-ng4li]

You always inspire me.

[@_ishykd_5452]

What spray paint brand and colour would you recommend for painting alloys chrome

[@PlugNuster]

That was amazing to watch, thanks.

[@JB0528]

The before and after is freaking amazing!

[@kathiehacht9156]

Thank you I learned a lot from you. Can’t wait for som warm days to do mine.

[@JTKAG]

WOW. Thanks for the details!

[@BrassMtn]

That looks awesome! Great work

[@dahomiedirty8361]

Super Cool. Thanks Buddy

[@fttime9746]

Great job 👍👍

[@DG-mi7yf]

Excellent video! 🙇

[@chrisstreetable]

Just a quick tip to make this process easier ,if the tyres are good and balanced or if you have new ones fitted and balanced ,let the air out and have a tyre shop break the outside bead then get a big piece of cardboard or corflu (plastic cardboard},place a tyre of the same size as on your rims draw a circle on the cardboard from the inside of the tyre cut a slit in the cardboard so it can be slid between the tyre beads and rim as the outside beads where pushed back by the tyre shop this eliminates the need to mask the rim and allows paint to go around the edge of the rim and when they are dry you just pump up the tyre and the bead will pop back on and as the rear bead was not broken the tyre has not moved so the balance is still good and your wheels are ready to go on the car.

[@ducaking]

the end result is awesome!!

[@haroldvaughn1200]

Wow my mind was blown at the end when he put them on the car. Nice job

[@dawidczerniak5177]

It actually turned out pretty good I’m amazed

[@nathanek6598]

Very nice job. Well explained too!

[@lilghostbigyoungira]

Amazing job man, hello to Brazil!!!

[@movaughn20]

Great idea, Didn't think to 2 tone wheels I'm repainting. Just search the most popular wheels for my truck. Going to mimic some expensive suckers. Go with dark grey on the natural contour of spokes, black barrels and rim. Thanks!

[@philtucker1224]

Excellent! Very impressive improvement, thanks for sharing 👍😊

[@FindShindoHere]

Wow im impressed... im gonna do something with my extra set now... ty Badass Irish

[@lonewolf8113]

Great video ❤️❤️

[@ScullyandaFilms]

This what exactly need to know. May be you can help me well. I have Mazda MX-5 ND 2017 with OEM gunmetal 17" rims. What I like to do is leave the spokes as they are but paint where they join the rim in full chrome. So it ends up with chrome rim all around. So spokes needs to be masked but worried the paint build up between the two meets. Altimately looking g for BBS chrome outer rim with black (in my case gunmetal) spokes in the center. Can you advise how to go about this? Thanks.