Рет қаралды 38,011
Last weekend was the first time I attempted to fill my new 74 cu ft HPA air tank. Took it in stages to not overwork the compressor as well as changing water.
After I was at about 300 bar (~3,300 psi), I called it a day. Noticed that there was moisture at the tank bleed valve and when I checked my 2 stage filters, stage one was wet and oily and stage two was also wet with some oil as well.
Tested the air and sure enough, had some water (and probably some oil in it as well), so I drained the tank and left it open to dry (doesn't help the oil though).
Also ordered the Tuxing water/oil separator. This thing is huge compared to my first/second stage filters.
I also need to change the filters in my stage 1/2 devices after 15-20 minutes of usage or less. Order more filters to save the tank! Still learning and hope nothing blows up ;-0