Twin discs Technovdrive 60P

A brief look inside the workings of a Twin discs brand Technodrive.
Any advice or suggestions here are taken at your own risk, no liability for your own actions can be taken.
If in doubt seek professional advice either with us directly or independently.
Thank you.

[@interludo]

You went for the jasic! I ve been trying my hands (and eyes) at tig welding too. Is that what you used to do the ali repairs?

[@dhcrouchmarineltd3049]

I have had Jasic for years now. All inverter machines as I need to be able to use my AVR generator with them sometimes. Yes I used the Tig for the propeller. Honestly these are such nice machines. I have an MMA, MIG and now the TIG all Jasic. Should add I have been planning the TIG for years. Its opened up my repair service options.

[@romakayak]

The half coupling has an oil seal on the exterior but is there an o ring inside to prevent oil from escaping between the splines?

[@dhcrouchmarineltd3049]

Not on these gearboxes. Use of a sealant is used. I used Wellseal. On the older PRM hydraulic boxes that had a removable shaft coupling there is an Oring.

[@jinlee2008]

Hi would this model fit to cummins 260hp 2200rpm marine diesels?

[@dhcrouchmarineltd3049]

You can make anything fit anything. But with that much HP it provably try to spit it off the back. Always best check the manual for the Max rated input power for any gearbox.