Not what I expected! TD42 GQ Patrol get MASSIVE turbo upgrade!

[@CruiserBrah]

Those guys are good mechanics. As a mechanic since 1988, I can't fault watching them work.

[@TylerThompson90]

They sure are!

[@Adon.Y]

Using slaz on that billet intake elbow is rough though. Lucky it’s not a petty engine otherwise hello vacuum leak after a few drives

[@Turbo_Tractors]

That setup will last forever like that. A very clean tune and the Garrett and 12mm will be barely working at those numbers. Well done mate👌

[@brodybaker960]

When’s your next vid release?

[@GQ2NV]

@turbo tractors any tips for get boost to come on earlier td42t gu motor in gq 2.5 cooler piping bout to do 2.5” dump p4x4 turbo 11mm boost comp pump

[@exploredw8959]

How much it cost you till now ?

[@Turbo_Tractors]

@@GQ2NV More off-boost fuelling can help bring the turbo online sooner. The new pump you’re looking at will probably sort that out for you. P4x4 are bloody awesome.

[@bruney7248]

You can tell by this man’s face at the beginning of the video that he couldn’t wait to show us how this baby had its first run. That made me happy.

[@Communitylife]

Your mechanic/s are the most down to earth honest mechanics I have so far in any youtube channel with the exception of some I may have not come across yet. Im in Qld but will be buying an older patrol and bringing it right there. I missed our MrcLandcruiser Team from Qld. Another great team.

[@gingerdiaries3686]

Those mechanics are legends, so good at their job. What an awesome car! Nice work

[@TylerThompson90]

They sure are! Thanks!

[@frankspinella250]

Great build mate…top mount intercooler usually get less mud in them and you don’t have to clean them as much.. great mechanics particularly Nick …you gotta go wheeling and camping with them…now that that would be a great

[@nzfishinglife]

This takes me back to back in the days modding my 300ZX with new turbo, intercoolers, ECU and gauges on the A pillar! Miss those days!

[@ABL973]

Its good to see professionals at work. Great build series on the GQ and can't wait to see it in action.

[@TylerThompson90]

Thanks 👍

[@LordEthan2]

Burto's a great addition to the channel, to be honest. Great character.. And handy on the tools!

[@DamonJW]

Mate such an epic build series. Quality professional information and tips mixed with gold comedy. Those lads at S&P are absolute legends. Always worth its weight in gold knowing a good crew that knows their way around the ol forklift crank snapper. If im ever in town and need help I'll 100% be going there. Cheers

[@TylerThompson90]

Cheers mate!

[@ericjohnson6802]

Nice work. Def keep an eye on egts and temps...550 and 100 degs is best advice. Hopefully it will hang together for you but I'm guessing like me and my boys you'll have the TD apart for a new head or a block sleeve/rebuild soon!! It's called "TDLife".

[@Turbo_Tractors]

Amen😂

[@timothyhoppen]

Sleeves come out it’s a paper weight IMO.

[@Lee-astrololee]

Tyler this has been a massive built for the Patrol, you must be massively happy with this job well done. May your vehicle serve you well with many adventures and are a epic as the job these guys have done!

[@TylerThompson90]

Thank you! Appreciate it

[@tombreakspear771]

Bro that mechanic has me weak😂 “I quite like it Tyler”

[@TylerThompson90]

😂

[@raybulmer5707]

Truly fascinating and interesting. It must be great working with such a professional team.

[@Cricky2411]

Awesome, the big GQ turbo. Well done Tyler and the mechanics are amazing, can’t wait to see it in action

[@TylerThompson90]

Thanks 👍

[@theozBandit]

Great vid TT, ...but this comment mainly concerns the guys down at S&P that did all the work..Fellas, AWESOME job, very specific and very professional in smallest detail with the small things like wiping down the FW, and both guys each double checking bolts, basically doing the job properly eg doing bolts up and in proper order and with the correct tools like a TW (unlike the guys on a performance tv show in Melb couldn't even get this right working on 100k+ HSVs using the rattle gun as a torque wrench) therefore am definately coming to you guys for all future mechanical work and recommending to others too.. ...oh and the explaining of what does what and where and why just made you guys even more awesome which just showed the guys DO know what they are talking about! Well done..👍👍👍

[@Sethjxl]

Hey Tyler. I'm running an 18g with the ufi 11m 200hp pump, also TMIC. If your looking for a little more lower town torque and faster spool time, I suggest looking into larger intakeanifolds. I cut the top off mine, lifted the top my 50mm and moved the feed to the front of the manifold. The difference in responsiveness was amazing. Really enjoyed watching this series, that's a well built GQ.

[@TylerThompson90]

Thanks mate!

[@klappers1]

Nothing beats a 50mm lid lift for bang for buck

[@jamestanner9198]

A very good mod to do to stop cylinder 6 from over heating is take head off take the welch plug out of the back of the head put fitting into it then plumb it to the cooling system . You will find your car will still get hot too hot with large tyres driving in soft sand without this mod.

[@aussiebob1315]

old mate is craaaacking me up!...ya even put subtitles in for him...cracking up over here in NZ..more of old mate winging everything together please. harrrd out australian accent ha great vid

[@TylerThompson90]

Cheers!

[@OTRWA]

Awwww jizzle taps...gotta be proud of this work of art mate...nice job. Super awesome rig.

[@TylerThompson90]

Thanks 👍

[@BodybuilderBuilds]

Yea old mate just covered every car in that joint with overspray, especially the patrol right next to it, rip ya windows, u can see legend mechanic in the back not happy 😂

[@TylerThompson90]

Lucky its my patrol 😁 No overspray on my windows

[@lucysoutdoors]

I love a mechanic that knows how to wire up things ..this go's to some thing and this go's to some thing🤔🤔🤔.I'm taking my car there 🤣🤣🤣🤣

[@bensanders5453]

Looking good mate can’t wait to see it on the tracks

[@TylerThompson90]

Cheers mate!

[@richardwalsh5570]

Great video, however, no excuses for not wearing safety glasses men. It is shit when you get something in tour eye and are faced with potentially losing it. I know p.

[@shaunmccaw2911]

Your content is threw the roof mate well done 🤙🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@TylerThompson90]

Cheers mate!

[@fatmanoverlanding]

I like how you keep poking the hornet's nest that is social media. This time by fitting an LED whip on your bullbar. 😁🤣 You've now made it too nice to take it serious wheeling. 😁

[@TylerThompson90]

Haha, always a bit of fun!

[@jmac822]

Cool video Tyler, I brought npc clutch rated to 1000hp and it only cost me about $800 and that's including shipping to Tassie. 4 terrain are good though.

[@maverick2242]

Dude, the Tyler proof machine is a beast, (even with the pink bitz, still not a fan of myself, jmfo though fwiw) that little dude though hes the Aussie Chris Rock of all shop mechanics, stand up laughs and one liners all day, give that man a beer, many beers!!

[@TylerThompson90]

Thanks mate!

[@bioshock425]

God damn the boys doing a good job!!

[@ArlenPens-c5f]

Someone put “that’ll contaminate the friction material on your clutch plate” on a shirt 😂

[@jeremyguerin4204]

Great video mate!

[@TylerThompson90]

Glad you enjoyed it

[@Jimmy_Saf]

Mate I don’t think you could have asked for better mechanics to work on your rig. Everything’s mint, top job!

[@PSIDieselCO]

Burto is the life of the show

[@domenicitaliano7255]

What lift pump did you go with and why ? I’m Looking at doing one if needed

[@richardwalsh5570]

Good to change fork and pivot ball. I had a ball break it was a prick.

[@HammerRocks]

It's progressing well. It now has the go ,to go with its show. 👍 Though it looks like you need your tacho fixed. Is the GQ's tacho electronic or connected to a cable?

[@Sethjxl]

All TD42 use electronic taco. If they work, that is...

[@TylerThompson90]

Its been fixed since, replaced it in the dash cluster

[@caseydixon8714]

Dont worry about the soot, it gets the moot

[@brentmcd12]

Go the Patrol! good video to watch ! 🛻📹🤙😎

[@ChrisS-rp2pb]

How the fuck these guys know all this shit about patrols.. fuck I feel i inadequate watching this... awesome workshop!!

[@jessetink3753]

Them boys at s and p really know there stuff that for sure 👍🏽

[@nickking7643]

awesome vid mate

[@radezlojutro8872]

Thanks again for the time and effort you put into your KZbin channel its not easy 😊, you mentioned a Hi mount winch really hope you upload that as its what I’m looking to install on my own car {Red Winch/Giggle Pine😂}.

[@TylerThompson90]

Coming soon!

[@andrewt3952]

Great episode👍👍

[@TylerThompson90]

Cheers!

[@mekobrescianini9657]

Bloody epic build man keen to see how it tows you'll know its capability then 👌

[@TylerThompson90]

Tassie trip coming soon!

[@mekobrescianini9657]

@@TylerThompson90 bloody keen mate love your content 👌, love the old gqs I my self have a gu too and still think my gq eats up the track better

[@triggerhappy8872]

Excellent vid & truck looks/goes great.. Should’ve got Autometer gauges ✅.

[@RobKidnie]

SUBSCRIBED! :) a cost break down would be interesting, cheers

[@TylerThompson90]

Will get something done regarding that soon!

[@MB-lj8um]

Great videos Tyler- can you give us a cost breakdown on what it might cost to get this sort of work done, inclusive of parts and labour ?

[@franciscochongloo1752]

Nice explanation, Can I know which electric lift pump are you guys using???

[@moritz1267]

What a nice car and setup 👍👍

[@TylerThompson90]

Thanks! 👍

[@SHOCKcustoms]

Can you do a video on the engineering process please. Interested to learn how u get beadlocks approved and legal and also your stopping test with the big boots. Thanks

[@TylerThompson90]

Yeah I did one on the GU but will prob do one on the GQ, just try not to do the same video again haha

[@SHOCKcustoms]

@@TylerThompson90 thank you

[@Jayden.Dean25]

As a cruiser man through and through, hats off that patrol is neat

[@TylerThompson90]

Cheers!

[@petergill8819]

You could put a AFR gauge in it airfuel, ratio and self tune. Find out what diesel ratio is 25 to 1. I think it is.

[@leonardpersin4255]

Great vid. What injectors did you go?

[@samdsoca2725]

any link to the guys who did the job for you? Also ho much did it cost for the upgrade?

[@TylerThompson90]

S&P Automotive in PMQ

[@bears2604]

I have a gq so loved watching it. Also I have a np300 which my wife drives. It's actually made me think if I wanted to do this or not! It would be so expensive. Cost for all this would be nice to know. I can sort of see the advantages of the nav now, it has most of this already done. I loved the vid opened my eyes to the extreme expense of making a capable gq 4x4. For an Aussie battler I don't think I can condone it. But love to see what it would be like if I could do it.

[@Sethjxl]

Here are some rough numbers from someone who has d9ne a very similar build. 18g turbo, $2200 Pump, $3000 TMIC, $1000 eBay special, or $2500 bif name brand Exhaust, $2000 Gauges and bits, $500 Clutch, $1500 installed Tune, $400 4" Snorkel with airbox, $1000 Bonnet scoop, $1500 eBay, installed. Do it in your driveway, about 1 month worth of weekends with a few days off. Do it at a shop, 4-5 days and $4-$8k labour.

[@td42dirtygq]

Wow that turned out tuff I love it the hole set-up and a nather good video tyler and the boys at the shop what egt you getting now after the lil tune you did Shim job 👍🍻😍

[@TylerThompson90]

Thanks 👍

[@richardwolski5899]

WILD MACHINE.ENJOY ...HIT THE TRACKS TT

[@TylerThompson90]

Cheers!

[@jasondaley6723]

Mate another funny episode those boys must be in a clown act after hours they make they contribute in a comedic manner, always very informative anyone can understand 😉 and that rig is the ducks nutz, we need a rig run down on both Nissans at the same time and maybe break down the costs, always happy to watch and learn and love The Dad's Dumb Ideas

[@TylerThompson90]

Could definitely be on the cards!

[@johnhannonHanno]

I have always preferred Toyota but have been converted to Nissan after seeing what they do.

[@stephencawrse9940]

Good video Tyler but you need more rose 🌹 gold under the bonnet may be you could paint the intercooler aswell looks pretty good those mechanics are really good at wot they do any way keep the vids coming cheers legend

[@TylerThompson90]

Cheers mate

[@joeop5104]

Sick as bro Go the patrols

[@rohangearing6999]

Hi Tyler, Which one is quicker the tb48 Gu or the TD42 GQ ? Thought he Gu would be a fair bit heavier than the GQ.

[@attackpest]

great 4x4 Tyler are you going to get your Taco fixed. Great Blokes Mate.

[@phalanx3803]

why am i not surprised a damn patrol uses shims to adjust fuel.

[@psy06]

no way you'll pass engineering with that massive hole cut out of it without any bracing

[@jackalenzo5979]

I'm Jack from Indonesia, I have a Y60 engine, can I install a turbo without modifying the engine? Thank you in advance

[@patrickstaples7314]

Did you notice the tacho wasn’t working on the test drive

[@TylerThompson90]

It wasn't working but I've since replaced it

[@keilfestin4606]

How much is the cost of all this or some are sponsored

[@DomBeal57]

is there a link for that turbo line kit?

[@TylerThompson90]

hpdiesel.com.au

[@neilheyward2599]

I think it's gonna be a while to wipe Ur smile 😆😆👍👍

[@Shotbyhock]

The GQ starting to look great man

[@TylerThompson90]

Cheers man

[@philmenzies2477]

I think you should have painted the bash plates pink

[@TylerThompson90]

Next mod 🤪

[@chuckcarter7864]

This job must have cost a fortune !

[@nestinaeftif9369]

Get off the loud pedal - best line

[@TylerThompson90]

Haha!

[@crowco2977]

Does it feel weird to ignore all your OG followers comments after the Nav video ?

[@TroyBroadbent]

Go Burto

[@tombreakspear771]

Hahaha that mechanic is piss funny

[@petergill8819]

You should’ve done the conrod bearings but anyway

[@geoffgold6773]

The money you have spent on that car you could have bought OKA that will go anywhere

[@daniel-ll5zr]

I love these build videos! turbo Yoda, MCM and a view others made something similar. I find it enjoyable because it makes me feel like I know something about 4x4s. Looking forward to the next TRUCK build. 😂🍻

[@TylerThompson90]

Glad you enjoy it!

[@paulsmit8147]

🤙

[@dazrusticways]

Mate this build is off tap, I’m nearly converted to buy a Patrol.

[@TylerThompson90]

Cheers mate! I love it

[@timothyhoppen]

Tacho not working pains me.

[@TylerThompson90]

Yep! haha. I've since replaced it

[@qksmith]

isn't that "Cute"

[@caseygilmer]

Wow watched the whole build and no dose! Waste of time 😂

[@MicahBell_1860]

Algorithm

[@87LAG1]

I love how old mate talks aye !! Pm me or give me his @ so i can follow ! Turbo kit looks a goer mate

[@BUURTO]

@rexurtoo