WHAT?? SKYZONE NOW HAVE A MODULE BAY!! and its only $10 more

[@UAVfutures]

Skyzone pushing hard to take the analog crown, especially for the price. I also love the fact that it can work with any goggles with an av in.

[@biswassharanya]

Would it be possible for you to just check and comment on the fit with the aomway? I have the v1s and I know you liked the v1 back in time.

[@cimogt7857]

@@biswassharanya good question !

[@davidrgilson]

Just a thought, if you'd used self adhesive velcro rather than a chunk of sticky foam, the module bay could be detectable. Then you could still get your goggles back in their case.

[@jessjoshwyatt3571]

Exactly, the bay comes with Velcro and I just pull the bay off and wrap behind the goggles and it fits just fine.

[@noobFPV]

And you could keep antennas on module. Kinda like that.

[@DannyFPV04]

@@jessjoshwyatt3571do you need to use terminators on the antennas that are built into the skyzones?

[@bigeasymohlere1]

Just received my skyzone030 and module bay with RF today! Love it. Going from my aomway commanders v2 these are like night and day as far as the crystal clear screens. Beautiful but haven’t flown yet to check out the RF. Is rather bulky on side of googles and won’t fit in case assembled but still very comfortable to wear.

[@BengalCatChilli]

I just got my sky030. The standard receivers do really well.

[@Barnz1980]

Where did you get the module bay from big easy?

[@bigeasymohlere1]

Barnz1980 from Rdq like 10.00

[@Barnz1980]

@@bigeasymohlere1 cheers I had a quick google but if didn't come up anywhere🤔

[@dronedownunder652]

@@Barnz1980 I couldn't see it either. iI could only find the DJI analogue module kit at RDQ.

[@MatLittlePPG]

I legit didnt even care what the video was about... i was just thrilled to see my dude say "Goood day...." i always know its gonna be a great video.

[@nothinhappened]

G'day ..

[@NateBperkins]

This could even open up a whole new realm of performance for box goggle users who are usually stuck with in built receivers

[@shadeshiest22]

I just recently switched to running Rapidfire and fatsharks from using nothing but built in diversity receiver goggles FOR YEARS now(eachine box style, aomway, sky zone) and I’m honestly VERY surprised that I CANT TELL ANY DIFFERENCE as far as video reception or distance, I still get pretty much the EXACT same video and range, it’s NO better or worst across the board, with maybe some slight increase in video quality in certain situations... Quality VTX and antenna selection/orientation makes THE MOST difference( I ONLY run circular polarized antennas on ALL my quads and ALWAYS pair it with AT LEAST one matching circular antenna on goggles). IDK maybe I’m doing something wrong with band selections, or maybe I need to start flying inside of more buildings or parking decks to tell any big difference, but to me there really is none... very surprised and costly conclusion to learn

[@dronedownunder652]

Appreciate your honesty. Lots of people get taken in with the flashing lights I feel !

[@IshamPadron]

I run the Aomway v1 and i swear my video is as good as the HDOs. The only goggle I've tried that really makes a difference are the HDO2. Not for the screen quality but i really like the lens focus system. Can't wait to see more goggles add that. For some of us setting the IPD is not enough.

[@stevenkelby2169]

I think the advantage of rapid fire etc is the longer range and better reception in bad environments. If your standard video receiver is working correctly in your situation, you'll get no benefit from rapid fire.

[@elbedouirayen7938]

Please did this module bay works with fatshark teleporter v3 and eachine ev800 d?? Thank u

[@BengalCatChilli]

Aomways V1 + rapid fire would be awesome for heaps of us.

[@hoodisfpv7380]

Since it’s just an AV input, wouldn’t these work on Aomways or any other goggles that have an AV IN port?

[@doug2921]

I have good news for those out there with Aomway V1's. The module holder works great if you just use some quality thick Velcro. My V1's left antenna module went on the fritz and I almost pulled the trigger on new O3O's but saw this and decided to try it out. It worked perfectly with a cheap AKK Diversity Module all for only $40 US. I've never had video this good. I am still thinking about upgrading to the O3O's so I will have even more options.

[@licensetodrive9930]

Its appearance is less "bay" and more "barnacle", but so long as it works :)

[@jessjoshwyatt3571]

It definitely works and it just velcros on so it's not like u always will need it cuz the receivers are pretty good anyway. Only really need it if your doing bandos or something with alot of bounce back.

[@zenm8190]

This could even be a better option than the URUAV adaptor for DJI goggles - the face plate fits on and the module won’t wiggle around like it does with that adaptor?

[@RichardFAdams-kt9ux]

I just got a pair of Sky02C and I just got my Skyzone Module Bay. I'm looking using the Matek 1.3g Receiver and Transmitter for my fixed with models.

[@farrrkas]

Hi, a rookie question here. When you’re using the rapid fire or any other module , then what is happening with the goggles built in receivers? No antennas on it. Or is it automatically turn off when using AV mode? Isn’t it bad if you running the goggles for a long time with no antennas on it? Thanks in advance !

[@johncarold]

Hi Stew Great video and review of the SKYZONE Module bay. I was saving up for a new set of goggles and I have been looking at the SKYZONE 030, and now I can get a external module. Thanks again Stew for the information.

[@atreyu-gt7wj]

Love my skyzone 03O's man. Get em for sure! Seeing that this thing exists makes me even more happy I went skyzone. You can find em on sale (look for promo codes) for about $365.

[@ufopilotFPV]

Agreed i love my 03O's too.. turn up the luminance and they look so good !

[@QSpeedRacer]

I have had to fix my skyzone sma port twice.. skyzone offered to fix it in house but i just did it myself. sma port is cheap. but doing module if it breaks again.. in one compare rapidfire didnt seem so much better to pay extra $160. He got like 10ft more distance.. but def worth it if my goggles break..

[@boratsagdiyev1586]

I love the receivers already in-build . 5:54 ~ Stu 2020

[@boratsagdiyev1586]

Stu UK the fact you need to attack somebodies grammar confirms you got nothing. Why remove your reply weakling

[@prrcpor]

I wonder if you could use a different frequency receiver moduler like a 2.4 or 1.3 . That would make it convenient.

[@JohnFHendry]

Heads up RE: new Skyzone 04X... FatShark DOM HD1&2 standard VRX bay measures 50.5mm x 33.5 and the Skyview 04X VRX bay measures 47.5mm x 28.2mm. So TBS Fusion, Realacc, etc don't fit... not sure why Skyzone did that.

[@QSpeedRacer]

dont know if i missed it distracted working.. what the range difference from sky030 stock vs with rapidfire with module

[@Acestrex]

I love my 030’s and I already have the module bay adapter and thank you skyzone!!👍

[@mallamasj7019]

Do you know if is it valid for the 02?

[@Acestrex]

mallamasj70 I would think so. As long as it has the video in. As for the shape it should be similar. I have seen videos of other people adding external rx’s to the skyzone 02 I’m pretty sure it will work for you.

[@mallamasj7019]

@@Acestrex thanks you friend!!!

[@bozosni]

Hi man! Whitch module do you use?Rapidfire? I am waiting for my Sky03o to arrive and i am thinking if the internal module is equal with a mid range external module , so it would be a waste of money except from rapidfire that is too expensive.

[@dash-boardcam549]

Could you run 4 antennas at once? Epic range and quality 🤔

[@forprogress999]

I’m in the market and my buddy with fat sharks only argument left for getting sharks over the skyzones is now gone.

[@michey7822]

This should be good for me! I have both skyzone02 and fatshark hd2. The only reason why i bought fatshark was for d module trueD, its raceband and lowband freq. My skyzone was more comfy in my face though

[@IanF-FPV]

Stu from my experience so far I feel like my Aomway Commander V1s have better reception than my SkyZone 03O. I guess this would help but I can just use a ground station for now.

[@denislamadeleine1181]

You dont know how happy I am to see this. I'm awaiting the arrival of my first pair of goggles...tes the 02X's and was contemplating sending them back in favor of the attitude V5 just so I could have the module bay. After seeing your review of the 02x I knew they were a good choice but I'm a total noob and don't know what the future will change for me so seeing that the option is available has made me decide to keep the 02X's...if they ever get here doh! Thanks for another great video and keep up the great work!

[@galx3573]

If they make a v2 they NEED to make it so you can take it off and put it back on. I might get this but I really like my goggle case and I doubt I’ll be able to take it off after I get it.

[@anthonycanthaveit8844]

Velcro??? Just use velcro then use your skyzone case?

[@MathieuTerzian]

Silly question (just received mine): module bay + AV is on the left, battery’s on the right. How do you run the power cable from side to side without having it hanging loosely. Front? Along the strap? Thanks 🙏🏻

[@likandros3633]

thank you for this video!!great as always!!i am about to buy my first goggles and i cant decide between 03o and 02x...i could use your help...thanx!!!

[@Lilcrunkgy]

What did u get

[@NeoIsrafil]

Itd be cool to have a review of the best fpv receiver modules, but glad to see them doing this.

[@oneshothooligan6279]

Love my 030's sold my Fshdo's because they lacked the features of skyzone's so nice.

[@rikusesterhuizen264]

The purchase link no longer takes me to the item. Has Skyzone stopped making it? Please send new link if possible. Or share the product full name to assist with searching for it online.

[@jasongriffiths1048]

I think I’m being daft I can’t see the link to them 😔

[@ledchickenfpv7164]

Hit the little arrow up in the description section, or on computer screen I think it might say -more-... In any case, expand the description and the link is down in there.

[@gmivisualsjason3729]

I can't see the link...

[@GiorgioAlzora54]

Very good video, thanks. Just one question, what is the max voltage you can use with this module ? Do you still need to put antenna on skyzone ? Indeed in your video, you do not have antennas. thanks

[@teourbs]

My skyzones came with this module adapter in the box. No extra purchase needed ❤️

[@nc_rider_7046]

Which one did you buy

[@teourbs]

@@nc_rider_7046 03Os

[@ModularIsl]

There’s still two open antenna ports can those be filled with more receivers?

[@fei3131]

I have the scout fat shark goggles, I really don’t want to spend another $400+ for a new set, how well do you think this would fit on them??? It does have the av input

[@kydawg1684]

Love seeing adaptation of existing equipment. It is a great option - who cares what it looks like. We are all nerds at the field....so you are a smidge nerdier, but you have more cash in your pocket. Nice job Skyzone.

[@crispinodell519]

Good morning hey I've got old eyes I fly with box goggles. Do you think that they would fit on a pair of ev800d. I would love to get a wrap and fire on my box goggles.

[@joevo2]

AFAIK this is made to stick on the side of the skyzone. If ev800d have AV in I think it would work just fine only think is that you need to think of the power supply and somehow duck tape the module on ev800d

[@crispinodell519]

@@joevo2 good morning thank you for responding. I've done a lot of research and talked with Joshua Bradwell he says they will hook up to the 800 d no problem again thank you for taking the time to respond to my question bro. This is going to be a game changer for me.

[@Chillin-fpv]

So i just got the rapidfire module and using skyzone03o. I have it plugged into Av in but its like my goggles arent recognizing its plugged in. When i change the channel and or band through the RF module it doesn't do anything and i still have video. I have to change the channel with my goggles in order to get video. When flying its like my goggles dont have any antenna plugged in. Im confused

[@reece7713]

Where is best to buy the mount for skyzone 030 goggles?

[@MatLittlePPG]

"I can crash it because oblivions are strong as an ox and its not my drone haha." Bahahahahahahhhhahahahaha😂😂😂😂

[@DavidReynolds-kr6yh]

WOW, skyzone are really kicking arse with innovations like this, first they make fat shark have to actually up their game as far as goggles go, and now they make a great little add on for putting a module onto their own and other goggles. Damn it, I was looking at upgrading my 02+ goggles for the newer 03o’s, now I might still do that, but also buy that module adapter as well, they might be slightly behind the newest fat sharks as far as their oiled screens, but I’m sure I’d still be very happy.

[@jeffpv]

Wow, this will instantly bring my v1s's to the next level. Buying these PRONTO

hi i think the adapter is discontinued. i have bought second hand sky03o and i want to use rapidfire. Is it possible to make self an adapter? 3d print?. please need help

[@scooterfarl_fpv2344]

I deffo getting one of these. Where's the link

[@riccardo5753]

I am new to FPV, do these goggles work with a crossfire receiver on the drone?

[@GeezerGramps]

What about putting the bay on with Velcro?

[@bleeksbentbits3150]

Not only do we finally have the ability to run to run 5.8 & a second frequency, such as 1.2/3 on the same goggles in a compact form, but we have TWO options to do so! :)

[@ArchmageAU]

Good review. Looking at getting this as I use 03O's (need diopters) and I race. Questions on the power input. Skyzones run off 2S to 6S voltage. I run mine off 4S. Modules use 5V. Does the bay support 2S to 6S input and convert voltage to 5V for the module (I expect so)? If so, what is the max amps a module can draw? (Rapidfire need at least 350mA to avoid switching to low power mode). Also worth mentioning that Skyzone DVR can record the AV-in. (I checked this before buying my 03O's).

[@lukehazzard6649]

Did you work this out? I’m just thinking the same question? Will the rapidfire run fine on 6S??

[@TheSzymonc]

same question, any clue?

[@jeffcviews]

Was wondering why no ones had done this thank you!!!!🙌🏽🙌🏽🙌🏽

[@paulr3556]

Got the skyzones 03oleds and was going to use the DJI version on them. Now I have to buy this, thanks a bunch. Lol. Too cheap not to, that link is SOLD OUT already though. Any chance of posting another vender, I'll try and look too.

[@HeroSnowman]

what voltage batteries can be used with it?

[@connorcunningham7449]

Do you still need to use the rapidfire power board like in the HDOs?

[@Gogo-un4bv]

What they fit the DJI goggles . I think it’s really cool for sky zone to do that .

[@jimtrimble4614]

Will the sky03o’s osd function properly thru a/v in? The other module that I’m thinking of limits the functionality of the goggles osd regardless of receiver used!

[@jqmabuti3043]

i wish they could make a additional module for head tracker that will make flying more robust!

[@OLEHFPV]

if I use this on my EV100 is there a way to still use the DVR with the AV port at the same time?

[@LinuzoFPV]

Where's the link to buy this module bay?

[@blindfpv5763]

Yea

[@ChrisM-yr5tt]

Great video Stu. Hey I just received the module bay and the rapidfire module to use with my 030 I have it all set up and no power on the display for the rapidfire.Any suggestions?

[@CarbonGlassMan]

Is rapidfire really so good that it's worth the $150? I have the Sky030 goggles and am pretty unimpressed flying a TBS Unify pro32 nano set to 400mw. I've never gotten a low rssi warning with the r-xsr so my distance is limited by my video signal. I'm afraid to go behind too many bushes and going behind a building just cuts my video out.

[@sHunek]

When i use this mod ( rapidfire with antennas) i need to plug also antena directly to my gogles? if there are no antennas in the goggles, it will damage the internal receiver?

[@shunfpv6602]

I have skyzone 02x and i use 3s lipo to power up my goggles when i will plug module with rapidfire it will be safe with 3s( font Burn rapidfire module ) or i need to buy 2s lipo?

[@snakes301271]

wheres the link to the module bay stew??

[@CarbonGlassMan]

Will TBS Fusion module work in the Sky03o goggles?

[@RMCyborgFPV]

woow that was just exactly what I was looking for :o excellent thanks for the review

[@_DAD-E]

How well will it fit on the 02x’s?

[@fpv568]

Hasn't that been available already for a while?

[@zonartfpv]

Wow great piece of hardware, I've just bought the one for the dji goggles for my aomways but this one looks much better to fit on the goggles

[@cozmics1191]

Would this work with the older skyzone 02s?

[@gmivisualsjason3729]

Yes if it has an av in port

[@mandarin1257]

It works with almost anything, even fatsharks!

[@SamDewing]

Would this be work with the DJI HD goggles?

[@dronedownunder652]

URUAV have a version custom made for DJI headset.

[@RollnHeavyKevy]

I was going to try one of these on dji. The benefit i see is this has a case covering it. Uruav one does not.

[@SamDewing]

@@RollnHeavyKevy My thoughts exactly. The only thing holding me back on getting the DJI system is not being able to fly analog without hacking into the goggles. The Uruav system while doing the job does look very janky and I could see modules breaking very easily without a cover. I'm sure there will be more solutions soon.

[@RollnHeavyKevy]

@@SamDewing I'm currently using an old stand alone aomway module on a tripod. Works ok but I'm looking forward not having all the chords everywhere and two batteries. 😅

[@gabinofpv]

so would this $10 module be all i need on my skyzone 02x’s? or would i have to buy this then another module that goes on this one?

[@zerophusionfpv5806]

Wish he would show a video with unit bay on say a pair of EV 100

[@philaell]

Ive been waiting for someone to review this for a month. Since the module bay has become available.

[@Higgie45]

I have been wanting to get into this hobby for a while I have a tight budget but I have saved about 350 up I don't have any gear should I get the skyzone o2x and a decent controller and use the simulator till I can get a quad or get cheaper eachine goggles and a cheaper quad.thanx

[@100ermac]

hi i have problem with this mount holder and furious true d quality is worse then oryginal reciver my gogle dont see reciver or antenas anyone have similar problem ??? maybe any gogle settings ?

[@TheSzymonc]

will it work with 3s battery?

[@pableras2211]

Link?

[@nothinhappened]

If using a rapidfire with this... Can u see the rf signal strength in screen still?

[@stevenkelby2169]

Yes.

[@nothinhappened]

@@stevenkelby2169 thank you. Do you know if using the module via an adapter has higher latency than if using it in a goggle designed specifically with a module bay.. like the fatsharks?

[@stevenkelby2169]

@@nothinhappened No difference in latency 👍

[@thomashannam2985]

You just saved me £500. much love

[@TateDK]

That’s what dumb systems i have with a eachine ev100 combined with a pro58 👌🙌 through the avi in

[@michaelmatthews6421]

Looks awesome, sadly I have to wait to see what happens with our regulations (in the USA)before I can think about getting anything else. I'd like to see it compared to Fatsharks with same modules. Bravo to Skyzone building on existing models and not trying to sell a totally new xhundred dollar goggle! This will win you customers

[@bobbymiller9098]

Dont wait

[@averagewojak2623]

Would be interesting to try this on the EV100's

[@MrBumbles2]

may try it on my fxt viper ,,

[@blindfpv5763]

Where can I buy it??

[@paulsmith1769]

Is there a link to this?

[@mallamasj7019]

Is it valid for SKY02S V+ version?. I am Spanish and it have been difficult to understand the whole video. Thank you!!!!

[@joevo2]

As long it has an AV in it should work. Not sure if it would stick flush to your goggle but ya it should work

[@mi-xtcfpv5204]

Hi Stu....nice video and something had been waiting for for a while now. Thx the video, can you please give the link where we can buy a module like this please please please:-) ?

[@hoodisfpv7380]

Since it’s just an AV input, wouldn’t these work on Aomways or any other goggles that have an AV IN port?

[@nothinhappened]

Thats what he says in the vid...

[@RollnHeavyKevy]

Going to try one of these on my dji, use some velcro and bam! 🤗

[@raymondwilliams6878]

You know there are mods that you can buy specifically for the DJI to accept analog modules? Around the same price...

[@RollnHeavyKevy]

@@raymondwilliams6878 thanks. I have seen the iflight one and the uruav one. They both have there drawbacks for what I'm looking for in the analog mod. I think this is so far the best option for me. I would really like the iflight look that had a receiver bay and plugged in like the uruav one. That would be perfect.

[@JeffriRanger]

TBS Tango II

[@rafninja01]

I like very much!!!! Thank you !

[@jcfpv3454]

That's Amazing

[@QSpeedRacer]

Id paint it red though

[@TheWestysworld]

Dude are you related to chopper?

[@godsun358]

O30s receiver modual foxeer wildfire killing fatshark

[@joshuarichardson4070]

Boom what ive been waiting for ..... woohoo

[@Darksagan]

Nice stuff.

[@MalusVexFPV]

64th :P I want one would like to try out some modulars and compare :)

[@ajayinthelife154]

Module bay, bae

[@krakenmonster2302]

Jahahahaa