Ultimate Comfort on Your Ebike (Suntour NCX Suspension Seatpost Review)

[@WillBrownAuthor]

Seat posts are definitely a game changer. I actually recommend upgrading the seat post before upgrading your seat. In my case, that was enough to make the difference on my RadPower RadCity bike.I kept the stock seat.

[@EbikeEscape]

Good tip, we did the opposite only because we already had a Cloud 9 seat sitting around.

[@zep4426]

Since good suspension posts cost over$100 and YLG seat I just ordered cost only $42, I went with the seat first.

[@ianmurphy6219]

@@zep4426 the seat cushions are cheaper but they wear out unfortunately in my experience. Lemme know if you found one that lasts!

[@mrmagoo9901]

Just bought both using your links from another one of your videos and it is a game changer. Thanks folks!

[@EbikeEscape]

Awesome, thanks for your support!

[@brucehutcheson5371]

Thank you for your review. Great video of how the seat post responds to bumps!

[@EbikeEscape]

Thanks for watching Bruce!

[@chriswedgworth]

Love seeing it in action Looks comfortable

[@EbikeEscape]

Thanks! It really is an awesome accessory.

[@greybeardragon]

Another great video. Very helpful and informative as always. Big thanks to you and your wife, Sir.

[@EbikeEscape]

Thanks Joe - we appreciate the feedback.

[@jimcurry5458]

Well done. The slow motion really showed how it works. To me, it appeared like it was set a little too soft or a stiffer spring was needed. When she went over the big bump and also when she went down the curb the seat post completely bottomed out. My thinking is I’d want it to take up the biggest shocks and maybe sacrifice a little comfort on the smaller bumps. Thoughts?

[@EbikeEscape]

The preload can also be adjusted. I feel like the seatpost is very good on the big bumps which you notice. On smaller bumps it does help but you'll notice more when you hop on a bike without a suspension seatpost.

[@annashealthylifeeverything8583]

i think i want it to work on smaller bumps for the riding comfort. i think it's more important

[@sm7091bs]

I use also one on my e-bike for more than a year. The comfort is like a old Citroën CX. Very smooth and comfortable. The important thing for maintaining is to lubricate it very well from time to time. Otherwise the wear on the mechanical parts increase fast. That’s actually the only drawback. I use a very good product called Polytron PL for this. After 1,5 year of use there is minor play on the mechanical parts. Kind regards from the Netherlands 🇳🇱 (the bicycle country…..😉)

[@EbikeEscape]

They make a cover that can help keep some of the grime out also.

[@TehNarrator]

Thanks for the slo-mo visualizations. This thing looks awesome

[@superfly2449]

Took a ride this morning after installing on my non-ebike. This thing works great, and is a third the cost of the next one I looked at.

[@EbikeEscape]

Thanks for sharing! Glad you like it!

[@vedi0boy]

Great video as always! I was hoping for an in-depth video about it. I am getting a RadRunner soon, which also doesn’t have front fork suspension, but I will wait to see how it feels stock first. Thanks!

[@EbikeEscape]

Hey, thanks! The one downside on the RadRunner is that your seat won't match up nicely if you're using the rear passenger pad. I've heard from many folks who found that proprietary seat uncomfortable. Even to change out the seat you have to buy a new seatpost so that's why many opt to just put on a suspension seatpost at the same time.

[@vedi0boy]

@@EbikeEscape oh, good to know! I think I will just start with a better seat at first. Thank you! Also, I realized my first comment was not clear. THIS video was the in-depth video I was hoping for (I am not expecting another one or something). The video had plenty of detail and was super helpful. Have a good week!

[@michaelroberts2955]

Great review - thanks for the info! Which cloud 9 seat do you recommend?

[@mikesvirtualhikeandtours1721]

Thank you for the review! Will be purchasing. I like the way you say Wagon.

[@EbikeEscape]

Ha thanks - must be my midwest accent! Enjoy your suspension seatpost, it's really a great accessory.

[@tyecook9630]

I looked at those today when I went to the rad shop in Vancouver today to pick up the larger battery for my mission. I almost bought one and after some research and seeing this video I'm definitely heading back tomorrow to grab one while the have them. I'm gonna have a bunch more range now so why not make it as comfortable as possible hehe😊...

[@EbikeEscape]

Totally worth it! And yes, I'd say go back and buy it right away because I've heard inventory is super low on those seatposts. How is the Vancouver store?

[@tyecook9630]

@@EbikeEscape the Vancouver store is really good, customer service there is awesome fer sure. They've gone above and beyond for me on more than one occasion and they never made me feel rushed

[@BritGuyAbroad]

Nice video, you guys make a sweet couple.

[@EbikeEscape]

Thanks! Luckily my wife is willing to play along when I ask her to be in a video. Our free time is precious these days :)

[@davemeise2192]

That's a good review and I think this seat post will also fit the Radwagon 4. If one examines the bike one will see that it has a sleeve that fits inside the large frame and it is fastened with a quick release on the frame. It then it has a 27.2 mm seat post inside the sleeve and it is also held in place with a quick release. The 27.2 mm Radwagon 4 seat post also has a detent running the length of the seat post and it is used in conjunction with an allen head screw situated in the sleeve to prevent the seat post from turning or twisting. There is also another allen head screw near the bottom of the 27.2 mm seat post to prevent removing it from the sleeve. One simply needs to remove the allen head screw from the sleeve and the 27.2 mm seat post comes right out. Most seat posts don't have the detent but the most common size is 27.2 mm so literally any 27.2 mm seat post should fit. I haven't tried to fit any other seat posts yet but I have taken it apart in order to examine it as I want to install either a suspension seat post or a dropper type of seat post on my Radwagon4.

[@EbikeEscape]

Yes, check out this video for more info: kzbin.info/www/bejne/f2HLYWZsrqadl68

[@scottmitseff4402]

Well done video and presentation, Thank you - I ended up purchasing one of these and enjoy it.

[@ron5677]

Great video. Did you guys adjust the seat angle? I really didn't know adjusting seat angle was a thing to consider until recently and I wasn't sure how much it that played a role in your ride comfort with the Suntour Seatpost. Thanks.

[@EbikeEscape]

Yes, it's personal preference but I tried to keep it as close to the same as it was as possible.

[@thankmelater1254]

Yes, you are correct. For me tilting the seat nose up so where I sit is further back on the seat, that makes the Suntour react more with more back and forth movement being noticeable. ALSO..from Germany you can get different spring stiffness choices for about $10 each and the price is cheaper than in US or Canada.

[@fisherwomanforJesus]

@@thankmelater1254 link ?

[@Steviewonderwhy]

I bought an adapter bracket for my aipas a6 cargo bike 27.2mm to a 33.9mm works out great on the sr suntour ncx

[@danielspencer5023]

Great Review! How much extra post length do I need to accommodate the Suntour Bike Suspension Seat post? I’m concerned that after installing a Suspension Post, I will have raised the seat too high to be able to mount it easily. Thanks

[@EbikeEscape]

About 4 inches, give or take

[@Funcentric]

How do you feel about it moving backwards when it's engaged (as opposed to just down). The reach length changes slightly.

[@EbikeEscape]

The overall movement is so slight, we have not noticed any issue with reach length changing.

[@rickyn1135]

I have this seat post and a RAD wagon with and an old Brooks saddle form an old Pashley Bicycle. The first issue I’m having is the ‘runs’ the metal under the seat you attaché to posts are too small. Cause my seat to wear down the parts in post. Forward a month ago & there’s a post:ad,can’t remember which,and the seat post is turned the opposite that you have it. I can here cuz I put a cheap spare seat using the seat pair that 90% of RAD owner’s told me I had it wrong. Well,it didn’t work & my Tuchus is sore. I’am using it now the way you have yours in your UTUBE.

[@ridesharebiz5317]

Great presentation. I have an ebike but I like to ride with good leg extension. I'll try the longer post .

[@EbikeEscape]

Thanks!

[@jayjacobs1504]

Have a cloud 9 seat and this seatpost . Can confirm this works . The seat is about 30 ish bucks and post maybe 120

[@EbikeEscape]

Glad you agree! It is an amazing combo.

[@jayjacobs1504]

@@EbikeEscape if it hurts to ride, you won't

[@richdome1]

@@jayjacobs1504 I paid 79 from Suntour sale! Pre pandemic.

[@MR57LV]

So if I turn it clockwise more it will make my ride firmer correct? I just got back actually from my first ride with it and it feels great with new Bikeroo seat and lower 35 lbs tires And getting the seat angle correct. Your the reason I bought it. The saying It’s a game changer always makes me go for it. Thanks for video and your remarks. Rick Las Vegas 109° here

[@EbikeEscape]

It will just adjust when the suspension starts taking effect if that makes sense. Good to know you like the Bikeroo. Hope you like it! And 109, wow! Stay cool!

[@gerryarabit]

Just got my E Bike fat tire. When charging the battery with a charger without removing the battery from the bike must the key with in the ON position or in the OFF position? I subscribed on your video as youare very clearly understood. Thank you. Thank you. Stay safe

[@EbikeEscape]

Thanks for watching. On most bikes it shouldn't matter but verify in the instruction booklet.

[@robertbaker1373]

thanks for this video, very helpful.

[@EbikeEscape]

Glad it was helpful!

[@tracyskorka1479]

Useful review, thank you!!

[@EbikeEscape]

Glad it was helpful!

[@RosinDaddy5280]

Will both the Suntour & cloud 9 fit on my Letric 2.0

[@EbikeEscape]

Yes if you get the right size and shim. Or just buy your seatpost from our store 😉

[@adgie]

Thanks for the awesome video as always. Do you know if this will fit my 2019 rad wagon?

[@EbikeEscape]

Yes it should, just not the most recent RadWagon 4

[@annashealthylifeeverything8583]

how is this 27.2 mm seat post with a sham? my seat post is 30.9 mm but I'm thinking about buying the 27.2 version because of the weight and to be able to use it on other bikes. one mechanic said to me that it's not secure to use an adapter thing

[@johnunvaxxed1918]

haven't found a single video that explains how 1/3 compression looks like and in which direction I have to turn the adjuster if the suspension is too soft

[@EbikeEscape]

We just eyeballed the 1/3 compression. Remember the adjustment is just a preload adjustment. You can buy a hard spring if that suits you better.

[@fisherwomanforJesus]

@@EbikeEscape where are they bigger springs available at ?

[@MrKing1961]

Will be nice if they can have on size 400mm,350mm and 300mm for short people like me my friend has a 350mm still a little big for me hope some day they can make a 300mm. thank you for your info.

[@EbikeEscape]

I'm curious what bike you have that the 350 mm is still too large.

[@carlose6010]

You can cut it, just make sure to keep the minimum seat insert length.. give it a little extra room incase you decided to raise the seat some eventually.

[@Swiftrunjrt]

Just curious how a noseless bike seat would work with the SR Suntour SP12 NCX Bike Suspension Seatpost ? Thanks

[@htkm1179]

Great video! Thanks so much!

[@EbikeEscape]

Glad you found it helpful.

[@joshuaj.2108]

Enjoy your reviews. I am 5'9/165lb. My wife is 5'4/140lb. We share one e-bike. Could we buy just one of these and adjust the height, or do you think we would need a dropper?

[@EbikeEscape]

My guess is that you'd probably be ok as long as your wife can still ride the ebike with the height that the suspension seatpost adds. You'd want to set the spring to your liking and then test it out to see if it works for your wife.

[@joshuaj.2108]

@@EbikeEscape Thanks for the response. Keep up the good work.

[@tracykimball6919]

Are you able to fit your C9 seat to this suspension post right out of the package without any extra parts? No other special adapter?

[@EbikeEscape]

Worked for us though we had an older C9 seat.

[@tracykimball6919]

Sweet thanks

[@tconstruction1991]

Amazing review thank you

[@EbikeEscape]

Thanks!

[@enoswilliam1]

Best value for the money

[@Visage1125]

Please tell me the model of the cloud 9 seat that your wife uses. Which cloud 9 seat is it? Can you send me a link please?

[@EbikeEscape]

Unfortunately we don't know the exact model since this is an older seat but we really prefer the lycra topped ones. Here are two options you can look at: amzn.to/3BaSI3l and amzn.to/3xNJ1FZ (affiliate links). Thanks for your comment!

[@bigrod997]

Very informative video.

[@MontenegroNoel]

grabing one for my Retrospec Beaumont ebike no shocks nice thick tires but this will help ! or change the game 😉

[@EbikeEscape]

Sweet! I hope you like it as much as we do. Thanks for watching!

[@jmac4952]

Hey I wonder if you could do me a favor. Is there a way you could put a caliper on the wall thickness of the Suntour seatpost. I need to know how thick it is. Thanks.

[@EbikeEscape]

I'd be happy to do so but unfortunately I don't have a caliper. Sorry!

[@MR57LV]

Ok just got the seat Post. Hoping it’s a game changer. The adjustment at bottom of seat post says turn clockwise to increase the pre load. What does that mean? Does it make it more springy or more firm?

[@EbikeEscape]

This is the best description: preload is the amount of force required to cause the saddle to start moving.

[@jimbo4203]

Nice video, my bike has a tail light on rear seat and the wire runs through the stock seatpost. There's no way for a wire through the sr post is there ?

[@EbikeEscape]

I don't think so, sorry!

[@parksguy3018]

Very good video, thanks. I was wondering what the weight of the lady riding the bike was and what color spring she was using? 👍😀🇨🇦

[@EbikeEscape]

Between 130/140 or so. It is the stock standard spring.

[@parksguy3018]

@@EbikeEscape thanks for the reply. I’m trying to decide if I need to buy the soft-blue spring. My weight is in the range of 125/130 lbs. Do you think the stock spring will be too hard for me?

[@EbikeEscape]

@@parksguy3018 I'd think it would be ok since that's pretty close. I guess I'd buy it and try the stock spring out and then if you decide you want the soft spring then you can buy it.

[@parksguy3018]

@@EbikeEscape thanks so much for your advice. I will definitely do as you have suggested.👍🙂🇨🇦

[@h_k6479]

Hi. One question about the preload. To make the suspension softer, screw clockwise (+) or anticlockwise (-)?

[@EbikeEscape]

From my understanding it is more about preventing the suspension from topping out or bottoming out. Here is the instruction booklet which can help you adjust it (search for preload): www.srsuntour.com/fileadmin/user_upload/Downloads/Consumer/Bike/Owners%20manuals/Archive/2012/SEAT_POST_MANUAL_2012_EN.pdf

[@sbdreamin]

ok, i just installed one of these. If the seat goes down TOO far when you first sit on it, you need to screw it in clockwise, which will make the 'preload' harder, ie, your seat won't go down too far when you are just sitting on it. Of course, if it hardly goes down at all, turn the adjuster counter clockwise to loosen it up. You can have someone judge this by looking at the silver suspension tube that is going to go DOWN when you sit on the seat. Have them look at that tube before you sit, then tell you what percentage of the tube goes down when you just sit on the seat. It shouldn't go down more than about 1/3 of the total distance of that tube. I hope that helps.

[@jamieryall8341]

Incredibly, yours is the 2nd comment where the question you asked, failed to be answered. The question was simple. Even the Suntour instructions don't state in what direction does it make it harder or softer. I wish they'd just speak English.

[@cal4625]

@@jamieryall8341 Maybe you need to look up the definition of "clockwise" and "counter clockwise" and "harder" and "softer". I'm not sure how the procedures in the comments could be more clear.

[@MrBobcoff]

I have a roadbike and ride roads only. I have a problem with a sore ass that ruins my rides after about an hour. Tried numerous seats and none are really good. Will this SR Suntour post be beneficial for me ?

[@EbikeEscape]

If your roads are really smooth it might help just a little but I haven't tried it on a road bike. Have you tried padded shorts?

[@MrWoodhaven11421]

Do you get a softer ride?

[@Jeremiah7-ox2nj]

Excellent informative video.

[@EbikeEscape]

Glad you enjoyed it!

[@anthonydanna4786]

I have the zoom suspension seat post. Will the NCX add more height .

[@lrigco]

Hi, great review! Can you tell me the measurement from the top of the frame tube to the top of the cloud 9 seat with the seat post all the way down into the tube please? I'm trying to determine if the suspension post with the seat will be too high. Thank you.

[@EbikeEscape]

Unfortunately where I am right now I don't have a measuring tape. Sorry!

[@hellequin04]

Hello Ebike Escape, did you find the stock suspension spring to be fitted to the weight of your wife? My wife is about 60 kg of weight, or 132 lbs, what is your thoughts about the need to change to the blue spring for this sort of weight?

[@EbikeEscape]

I just left the stock one on for both of us - I'm 145ish. I think it's worth trying out before you consider a different spring.

[@hellequin04]

​@@EbikeEscape yes, that was my way of thinking. We'll give it a try, so many people say its really good change, my wife also ride in a vertical stand position similar to the radwagon pos that you showed in the video, we ride in dirt roads when we do cycle tourism and she feels the bumps very hardly on her, so I start thinking in a solution like this, so thank you for the video it helped :)

[@christopher4509]

I have one more question: is the size of the seat clamps also have to be 27.2 mm ?? or does the size will be bigger for the seat clamps ??

[@EbikeEscape]

Not sure what you mean. If you currently have a 27.2 seatpost then the 27.2 will drop right in.

[@jack002tuber]

Is the spring available somewhere? I need the red one for this, it doesn't come with it

[@EbikeEscape]

Here you go: www.srsuntour.us/products/sp12-ncx-spring-kit?variant=27528526275

[@DavidBradish-f3e]

Do you know of a sleeve that will adapt to the 31.8mm stem on all Lectric bikes.

[@EbikeEscape]

Check out shop.ebikeescape.com - we now sell a suspension seatpost with shim for Lectric bikes.

[@SirJabalot]

Would this be overkill on an ebike with dual suspension?

[@EbikeEscape]

Overkill? No. Just a nice way to add some extra confort

[@mathieutallard6328]

What size should i take, my original pole circonference is 10 cm....Mesurement tape around it is 10 cm..

[@EbikeEscape]

Typically measurements are in diameter not circumference. But I did a little math for you. If your measurement is correct you need a 31.6mm seat post. Here is a link to that one on amazon. amzn.to/3chWi48 (affiliate link)

[@mathieutallard6328]

@@EbikeEscape Thank you very much. And because of the description you made in the video, i will go for a simple seatpost suspension. Don't need the balance back or forth. I'm just sitting. I have a motor on the bike. I don't really paddle. Actually uses the rinstein spring but it's not reliable. I broke two. Thanks again

[@michall6376]

What the hell is a preload? It’s the same terminology as in the manual. How do I make it stiffer?

[@EbikeEscape]

"Preload" is the tension on the spring, which would make the spring stiffer. So more preload would be a stiffer seat post. Hope that Helps! -JT

[@nikoskouzou]

400 mm is perfect for folding bikes basically essential.not only for taller people.

[@donnapittman2650]

Wondering if you would elaborate on this please. I have just purchased a rad expand 5 and waiting for it to be shipped. I have the sun tour 27.2 (350 mm in my cart) but worried that the 400mm is actually needed (essential?) for the rad expand? I am short 5'ft tall. Do I need to get the 400mm? or will the 350 be ok?

[@pedrofernandez8729]

Amazon has one for $70 29.2 diameter, is this the correct one? But I see it's shipped from the UK and it's taking 2 to 3 mos to get here!

[@EbikeEscape]

29.2 doesn't sound correct. Should be 27.2. I know stock is low so if you can find one, buy it!

[@pedrofernandez8729]

@@EbikeEscape 27.2 my bad!

[@faturrakhim897]

Now is there a dropper seatpost suspension ,sir ?

[@EbikeEscape]

There is - check out the one from PNW Components. I'm going to test one out.

[@richdome1]

I have this combo with front fork, luxury ride .

[@EbikeEscape]

Nice! What bike do you have?

[@richdome1]

@@EbikeEscape Lectric with front fork (Ali Express) Suntour NCX and Cloud 9 seat. Night and day ride ,street and trails! Also MTB ,Diamondback Atroz 2 and Polygon N9 . Biking since the 60's!

[@annashealthylifeeverything8583]

​@@richdome1may I ask how much is your weight. I wonder if cloud9 is best for heavier riders

[@richdome1]

I'm 133lbs, cloud 9 is heavy there might lighter options. Worth the weight though!@@annashealthylifeeverything8583

[@hichamferhat6360]

Good job

[@EbikeEscape]

Thank you! Appreciate the kind words.

[@dm3917]

Cool vid, do you happen to know aht C9 seat that is ? There is several, Thx

[@EbikeEscape]

Thanks for the comment. We do not since this is actually an older Cloud 9 but generally I like the Cloud 9 seats with the neoprene type top.

[@dm3917]

@@EbikeEscape Thank you

[@christopher4509]

A question: do i have to buy the red/blue suspension separately from the sp12-ncx seatpost ?

[@EbikeEscape]

I do not believe I've seen those sold anywhere else. You could try a local bike shop though.

[@jamieryall8341]

Go right to Suntour. $14.95

[@karlcarrigan4451]

Can you tell me how much height the suspension section adds to the seat height? I am a short rider and only have my seatpost raised around 8 to 10cm

[@EbikeEscape]

About 4 inches or so.

[@fisherwomanforJesus]

@@EbikeEscape is that after you sit on it ?

[@Am5lu]

I’m having trouble installing my cloud 9 seat onto the sr suntour seat post. The seat rails are set too wide for the seat post clamps. Did you have the same issue?

[@EbikeEscape]

Try bending the seat rails slightly. I did not have this issue but I know some people have. Shouldn't be too much of a difference.

[@Am5lu]

@@EbikeEscape Gotcha. Surprised to hear the spacing varies... Would think Cloud 9 products were better quality. Don't think I'll try bending it since ill probably over due it. Thanks for the suggestion anyways. Cheers.

[@scarfbandit177]

@@Am5lu I know it's been a while, but I'd imagine there are different size seats with differently spaced seat rails.

[@garrettromer8499]

Do u think this would be good for a short 5'4 rider or do u think it would be too tall? I'm also riding a radrover step thru not a rad wagon.

[@EbikeEscape]

Do you already have the RadRover?

[@garrettromer8499]

@@EbikeEscape yeah I've had it for a few months. Does great off road trail riding. I use it as my off road hunting vehicle. I have 260 some miles on it most of which are off-road. Got some tannus tire armor too because I don't want to have to change flats every 100 to 150 miles.

[@EbikeEscape]

@@garrettromer8499 Ok check where your seatpost is. Does it have room to go down 3-4 inches? If so then you'll be fine with the seatpost

[@garrettromer8499]

@@EbikeEscape lol nope I got her bottomed out on the seat post. Had to take off the metal plate that the brake light sits on to get it low enough. Which is fine because u can't even see the brake light well with the fenders on anyway. Way better to get a rear rack and attach the brake light to that so people can actually see it. Oh well I have a big cruiser style seat on it anyway. I had went with the cloud 9 at first but I didn't like how it felt or the look of it. I just got a bikeroo old person seat and it feels and looks so much better on my black rad rover.

[@jimfreed7292]

does this suspension seatpost NCX 12 fit on a LECTRIC BIKE?

[@EbikeEscape]

Yes though you need to make sure you purchase the correct seatpost shim. Look at your seatpost and note the diameter.

[@igorstimac8993]

Can you adjust the seat angle?

[@EbikeEscape]

Yes, definitely - much like any other seatpost.

[@christopher4509]

Does the rad rhino5 (rover) use the size 27.2 ? Or a bigger size ?

[@EbikeEscape]

Same size, 27.2.

[@gdfgdfgdsgdf]

how long is the suspension part? im short and usually i set up the seatpost as low as i can, how much does this adds to the height?

[@EbikeEscape]

I'd say about 4 inches or so. I can measure soon if you need a more accurate measurement.

[@gdfgdfgdsgdf]

@@EbikeEscape i got the messure thank you a lot, you are correct its 4 inches.

[@Deltro61]

What's the deal with min 10mm exposed thread? Mine is almost flush.

[@EbikeEscape]

I'm not positive but I think it's just a maximum adjustment. SR Suntour would be better to answer the question. If you find out let me know!

[@Deltro61]

It is so it doesn't bottom out and cause damage. I have adjusted mine. I found my instructions for the post, and that what it says there.

[@igorstimac8993]

When did this seatpost form Suntour first came out, and is the sp12 model any different than the sp17?

[@EbikeEscape]

I think it has been out for some time. No idea what the difference is between the SP17 but it looks like you can't even buy the SP17 online.

[@igorstimac8993]

@@EbikeEscapeI found places that sell them. A lot of places actually. Bike-discount has the best price. Thanks for responding

[@EbikeEscape]

@@igorstimac8993 Oh cool, maybe worth asking SR Suntour directly. If you do, let me know what you find out.

[@igorstimac8993]

@@EbikeEscape www.srsuntour.com/search/?tx_indexedsearch_pi2%5Baction%5D=search&tx_indexedsearch_pi2%5Bcontroller%5D=Search&cHash=7368a7244c722849defbabcba0330706 You can find them both here. They look the same and have the exact same specs

[@igorstimac8993]

@@EbikeEscape I found out out that the sp17 is the exact same seatpost but sold at different diameter size - 30.9. Many stores have the NCX sp12 and then a selection of different diameters, and if you choose the 30.9 diameter you actually bought the "newer" sp17

[@darrenreinke4482]

Do u know if the seat post fits a ride1up 500?

[@EbikeEscape]

Yes, it will. Looks like you need the 27.2 diameter seatpost.

[@David_Bruton]

Will the 30.9mm seat post fit on your Ride1Up LMT'D?

[@EbikeEscape]

Yes! I might upgrade at some point or try a different brand out to compare. I imagine at some point in the next year I'll get a different ebike which might replace the LMT'D - just because I want to continue to feature new models on the channel.

[@geronimomike]

what size suntour ncx suspension seatpost for ride1 up lmtld

[@EbikeEscape]

Hi Michael, I believe my earlier LMT'D was a different size so check your seatpost when you get your LMT'D.

[@IG-208]

I'm having trouble fitting my 30.9 suntour ncx seat post on my lmtd. The stock lmtd seat post is actually 30.4 and I cannot get the suntour to go down it is so tight. Any suggestions?

[@EbikeEscape]

Is 30.4 actually listed on the seatpost itself? Ride1Up website says 30.9. I don't have my bike handy so can't check mine but I thought it was 30.9...

[@IG-208]

@@EbikeEscape yes it says 30.4 on the stock lmtd seat post but it does say 30.9 on ride1up website

[@EbikeEscape]

@@IG-208 That is very odd. I just checked mine at it is a 30.9. Is yours a first gen LMT'D? Might be worth asking Ride1Up what's going on.

[@IG-208]

@@EbikeEscape I just got mine yesterday so it is from the new batch. I will check with them and see what is up. Thanks

[@EbikeEscape]

No problem, let me know what you find out. This will probably be a common question I get.

[@tb693ny6]

Which one fits the espin nesta

[@EbikeEscape]

Check out the diameter on the seatpost. Buy the same size or a shim and you'll be all set.

[@martinb554]

Which size will fit on a lectric lite?

[@EbikeEscape]

You would need a 31.6 seat post or a smaller size and a shim. Here is a link to the correct size SR Suntour NCX Seatpost (amzn.to/3tSDayX affiliate link). Also just know that the XP Lite has a really long seat to accommodate taller riders. You will lose some of that height if you go to a suspension seat post. -JT

[@martinb554]

Thanks

[@Paconovia]

Ok..5 secs into video.. I was like DIMITRI!! 🤣🤣🤣

[@EbikeEscape]

Not sure I get the reference

[@jessiethompson4154]

she's adorable

[@fabiogiehl2627]

É suspensão de mola ou ar?

[@EbikeEscape]

Spring, you can switch it out depending on your weight. Thanks for watching!

[@fabiogiehl2627]

@@EbikeEscape ele pula demasiado igual ao zoom?

[@dADAquaHobby]

Nice

[@EbikeEscape]

Thanks

[@jeffreywong5112]

All ncx user I know has this set up.

[@becomeaudible1]

Why is there a trend with helmets that look like you’re a jockey about to go for a horse back ride?

[@EbikeEscape]

Lots of people gravitate towards helmets that look a bit more unique than just the standard helmets with holes. I think it's great to have options, but of course everyone has their preference. No problem with the more standard helmets if that is what you like.

[@alexsainsbury2176]

God bless the playback speed increase toggle bar

[@EbikeEscape]

Completely agree. It's better at 1.5 speed.

[@melindawiens275]

Unfortunately I get moldy berries and old organic veggies too often :(

[@EbikeEscape]

Not sure what you mean.

[@MrMech-oj7iy]

That seat post loooked very uncomfortable. It bottomed out every bump.

[@EbikeEscape]

It still cushioned some of the bump, which adds a good bit of comfort. We have played with the springs since this and have made it so it bottoms out much less.

[@magictotem492]

I dont know with the rider on the back

[@billric1945]

Buy from Suntour the ones on eBay, Am, Walmart&Ali express are knockoffs! Suntour has a disclaimer on their website

[@--JohnDoe]

On the rad powerwagon, The baby needs the suspension more than you.

[@charlesbraun9668]

Looked like it bottoms out on hard bumps which makes it useless.

[@EbikeEscape]

The suspension is adjustable and I've personally never felt it bottom out (otherwise I'd adjust it).

[@rafaahammami9185]

You can't fine tune the saddle tilt with this seatpost, impossible to get the saddle to be level

[@EbikeEscape]

I am pretty sure it has a tilt adjustment. Did you try that?

[@platoscavealum902]

👍ℹ️

[@EbikeEscape]

Thanks for watching!

[@denzzz28]

please be mindful of the child behind you if you plan to use this seat post on that bike. it maybe comfy for you but not the child who will be seating on that child seat. the child only has the tyre for suspension.... if you are riding alone then thats fine

[@EbikeEscape]

Hey Dennis, this is a great point and is something we think of often when we are out and about. Thanks for watching!

[@DrTofutybeast]

Really poor sound inside the building.

[@EbikeEscape]

Ah yes, we've improved since then :)

[@schizy]

*Less than 2" of travel? Overly expensive, little benefit.*

[@EbikeEscape]

I haven't heard of anyone who has purchased this and been disappointed. $100 is a lot to spend on an accessory but the added comfort is worth it in my opinion.

[@julianshepherd2038]

Made big difference to me. V good value

[@schizy]

@@EbikeEscape *Yeah, if I spent $1C on such a foo-foo accessory I'd be trying to annotate the purchase too.*

[@seamusrafferty]

Get a microphone JFC

[@EbikeEscape]

Don’t we all have to start somewhere? Happy to report a microphone has been purchased.

[@ss_whole]

That bike looks like it weighs 200 pounds

[@EbikeEscape]

Ha not quite but it sure does look like it.