Ultimate RC Crawler Shock? Unboxing RCRUN Piggyback (Remote Reservoir) Shocks

[@martinneps9387]

Would this shock be good for a clad Zilla RC truck it was a cloud cluster but then I got all the tubular chassis for the truck has big tires really flexible and I'm looking for something to light dress it up and have better suspension with it Please comment back thank you very much

[@humanx187]

I bough some RC4WD KING piggyback shocks, do you think performance only wise these are better than the king shocks?

[@JPRC]

+humanx187 the RC4WD kings have a fake (faux) reservoir while these have a real functional reservoir. So you can adjust the damping rate on the fly with these while the RC4WD are fixed rate. so IMO these are way better :)

[@samrebert6410]

Nice shocks id like to get a set for my scx10 2 raw builders kit but i wont get for a bit and i was wonderin what size should i get tu for any input

[@JPRC]

Sam Rebert get them for the look only if you are doing a dual shock setup. These don’t do much for performances.

[@samrebert6410]

Ok tu for the input do u know of any that would b good and if so what size ive been told the stock ones r 90mm and also herd there 100mm tu for your help

[@JPRC]

Sam Rebert proline scaler or traxxas trx4 shock takeoffs (from eBay) and use with stocks axial springs and 10w oil are great competition crawling.

[@martinstinson69]

Do they come in different colors

[@phil9022]

It's not true dual rate without a stopper for the slider to engage the second rate.

[@pmm4177]

those are sick!!!

[@markamd1]

wow nice shocks!

[@dustinplee5067]

can someone please let me know if they have put any long crawler shocks on a traxxas stampede 2wd front and back

[@SoTwissted]

there tiny! I run big bore 1/8 scale shocks on my Axial Bomber. I also relocated the shocks over the rear axle so that I get more control and also less stress on the lower arms and this removes the need for sway-bars also.

[@chriswebb383]

twissted thdrr scale shocks..

[@xuben4104]

how long the shocks is you’d use?

[@dbcooper9401]

absoluuaht amazing!

[@aaronmaroney3607]

Do they have any for an hpi Baja

[@tyhardy4594]

Can you post a video on how to add oil to the shocks. I just bought a set and it's it's hard to know what to do since their are no instructions

[@JPRC]

They following the same exactly method to fill oil as these other remote reservoir shocks kzbin.info/www/bejne/eZzZnoZ5qK2tbLs

[@Sgtfroso1]

Hello Joe, I notice that when I set these up the hose balloons almost twice its size and the clear hose actually herniated near the hose clamp from pressure. Have you experienced this on yours

[@JPRC]

+Sgtfroso1 if they balloon that means you have wait too much oil. here is the video how to fill the oil. kzbin.info/www/bejne/eZzZnoZ5qK2tbLs

[@ricgruber9185]

nice scale shock

[@manrcrun8354]

so good !!!!

[@twisteds2fast4u]

strong enough to be put on a yeti?

[@JPRC]

These should be similar to the rc4wd King shock with a smaller bore. They are made for crawlers but they will be ok for a double up setup on your yeti

[@brandonbouffard9350]

Hey joe! I just bought a set of the 96mm for my scx10ii, any advice???

[@fitnoy8684]

first like! awesome looking shocks! how much are they?

[@JPRC]

Promo now $30/pair link in description

[@stephaniekondilas2469]

I'm trying to find the shocks for my husband and can't find them anywhere for his Monster truck can you help

[@JPRC]

hi i am also tried looking around everywhere, it seems to be sold out everywhere.

[@jarrettmonk5054]

that web site is confusing. do you know anywhere else I can find them

[@JPRC]

www.ebay.com/ulk/itm/231156023747

[@60productions41]

Hey bud nice videos. What shocks would u recommend for the score trophy truck ?

[@JPRC]

The only after market shock for the score is proline xt. These could only be fitted as nice lookers with the cbe shock keys. They won't be strong enough for the score by itself.

[@colbychristianson1735]

good quality, any leaking?

[@JPRC]

+colby christianson not at all and i have loving it on my bomber, i just got put the time to make another video on this.

[@miguelvalle4279]

Where can i buy them ?

[@Lord_Pistachio_Nut]

WAY late to the party haha! I'm new to the crawler scene. Actually, I'm new to the RC car scene all together! Been flying drones for years. Something new. I looked at prices, 49 dollars for FOUR of these shocks? Thats cheaper than anything I've found on the market.....are they really that good?

[@JPRC]

They are only good for looks.

[@MonsterPartsRc]

Nice shocks but the links to get them are dead...

[@JPRC]

+Jimmy Louis I will look around and update them tomorrow

[@fc3sboy1]

Best piggy back shocks are the ones from MCD for 1/5 scale . They are true piggy shocks . Hell they are more like Moto cross shocks then rc. These are just bling more then function. The mcd shocks are function and bling

[@aaronarndt8573]

Nice video, do you have a link as to where to purchase them?

[@JPRC]

Sure they are in the description

[@aaronarndt8573]

Thanks, I see it now after clicking "more"

[@mariosergiobeheregaray9188]

Nice

[@marrod2463]

the shaft to my shock popped out does that mean its done im a noob

[@JPRC]

Trying contacting the seller and see if they do something for you. I have heard they have been good with fixes

[@tony-gx9zj]

這裝在yeti 1/10可以嗎

[@JPRC]

+蔡又紅 the front of yeti can take 106 MM, but the rear are not long enough you have to use CBE shock tap for the rear to extend the shocks, ckrchobbies.com/products/cbe-cbe-yeti-tabs?variant=1182020497 but even with this these are crawler shocks they may not be strong for the yeti's weight.

[@magaman9962]

2 mil is like 2 inches of travel dude, to scale! These shocks are known leakers as well.

[@lossantoscity3249]

2mm of scale travel is less than an inch of travel in Full scale. 0.79 inch to be precise.

[@tiziano316]

all of 4 of them are leaking!

[@tiziano316]

4:12 you spit in my eye

[@nikolasschmidt522]

Hallo. Wäre cool wenn du ein video machst wie Maßnahmen sie befüllt und entlüftet. lg

[@MW-C-Music-Copyright-Free]

Que Pasada , Muy Bueno !! ;)

[@geritomlet2524]

There amazing shocks but they come unsealed, and you really gotta seal them well so if your not use to kits then better get something else.

[@geritomlet2524]

Running them on a very heavy custom hilux scx10 for 1 year+. They need filled and sealed every 4 to 6 months and make sure your truck is stored on a display stand to keep pressure off the wheels while not using. The performance is amazing, the quality is I'd say 4/4.5 stars of 5, proper assembly eliminates most all problems most people have with these. Use 10w30 oil and the clear tubes not the blue ones.

[@YOYO-vl6xr]

@@geritomlet2524 thanks for the info. Ordered a set for my SCX10

[@tiziano316]

Those shocks are like SHIT, they leak everywhere, near the pipe tube where it ends into the shock, they are a nightmare, please choose other shocks... damn! It's 2 days i'm turning crazy with them!

[@danetaylor273]

Tiziano thanks

[@mydick7429]

I bet he drinks mirrer right beer. Deck the harrs with bars of horry far ra ra ra!

[@alexisandabbeeweaver4772]

What is rock tight

[@chadconway927]

Look cool but they suck and leaked everywhere

[@JPRC]

Chad Conway they do look great I use them strictly for looks as a second by-pass shock on the bomber now

[@tiziano316]

yes, they leak. Just installed after years on my trx-4, but they work well.

[@chadconway927]

@@JPRC yeah thats what I ended up using on my tamiya toyota I built since I don't wheel it like I do my others. They ended up being for looks and not performance

[@thatsportsman570dude5]

I can tell its voiceover. Lol

[@JPRC]

Someone is paying attention :) most of my video are voiceover. I usually shoot my video and work on the bench then I go back and over them for more concise narration and it allows to quickly get bench done. Which one do you prefer? Voiceover or just live run on talking?

[@jangjang6080]

made in China

[@yoodoo122]

Garbage ! I bought these and the pipes on the reservoirs will not stay on, leaks all over them. Not good at all.