Pontoon Rebuilds Gets a New Motor!! -Episode 9

Talk about a MAJOR upgrade! This new motor is awesome and was such a good deal.
Check out my website!
ultimaterebuild...
Instagram is right here!!!
@Ultimate_Rebuilds
www.instagram....
Email me…
[e-mail]
Video Music:
Song: Atch - Echoes Music provided by Vlog No Copyright Music. Creative Commons - Attribution 3.0 Unported Video Link: • Atch - Echoes (Vlog No...
Song: Altero - Crazy Music provided by Vlog No Copyright Music. Video Link: • Altero - Crazy (Vlog N...
------------------------------ Over You - Atch / atch-music Creative Commons - Attribution 3.0 Unported - CC BY 3.0 Free Download / Stream: bit.ly/_over-you Music promoted by Audio Library • Over You - Atch (No Co... ------------------------------ 🎵 Track Info: Title: Over You by Atch Genre and Mood: Dance & Electronic + Calm ---
------------------------------ Travel - JayJen & tubebackr / jayjenmusic / tubebackr Creative Commons - Attribution-NoDerivs 3.0 Unported - CC BY-ND 3.0 Free Download / Stream: bit.ly/l_travel Music promoted by Audio Library • Travel - JayJen & tube... ------------------------------ 🎵 Track Info: Title: Travel by JayJen & tubebackr Genre and Mood: Dance & Electronic + Calm ---
Song: Atch - Time Out Music provided by Vlog No Copyright Music. Creative Commons - Attribution 3.0 Unported Video Link: • Atch - Time Out (Vlog ...

[@ultimaterebuilds7127]

Does anyone have advice on outboard maintenance? Such as when to do an oil change? When to replace the impeller? Etc...

[@shawnsullivan9986]

When you don’t know when it’s been done last do it. Once a season/50hrs for the basic stuff you’ll be fine

[@domb2919]

I live in michigan and when we get our boat winterized the fluids gets changed

[@coltonm.232]

You don’t have to winterize an outboard just make sure all of your fluids are changed about once a season your for the impeller water is coming out very slowly or dripping out it’s then time to change it

[@mathewgrinnell7392]

change fluids in winter and the prop doesn't need replaced unless the blade chips or breaks off entirely because a broken prop throws the engine off balance. basically the outboard maintenance is simple.

[@kylekaiser6265]

i would change the impeller ever 1 to 2 years

[@calebmoore9964]

My respect for you when I saw the garage roof 📈📈📈📈📈📈

[@JawannL]

17:48

[@dianapearson1771]

Years ago we had pontoon boats,gradually going up in size every summer! My husband would go to auto part yards and get the gas tanks off of trucks and install them on the back. We could run a long time on that big tank! Pontoon boats are the greatest fun.

[@P3surf1]

You can reuse your single voltmeter gauge with a toggle switch to read either battery 1 or 2? Just an idea!

[@ultimaterebuilds7127]

Didn’t think about that!

[@fryreartechnology7611]

Not sure if your is like my brother-in-law but he has a 75hp on his bass boat and we learned the 75hp, 90hp and 115hp were all the same motor with the difference being the carburetors sizes, spark plugs and the prop size on the lower. Found were people put the 90hp carb’s on a 75hp and a 115hp prop making it go much faster. Might be fun to play with. His is a Mercury outboard. I did a 80hp lower on a 40hp Johnson on my bass boat it was like a 1986?¿? if I remember correctly. Awesome build really enjoying it too.

[@johnboyd6139]

Sometimes it is a restrictor plate between carb and intake. Not sure on this motor but I've seen it first hand as my 25 Nissan had one. Made it a 30hp with zero cost.

[@fryreartechnology7611]

@@johnboyd6139 ... now I’m thinking I might go check for that on my old Mercury 9.8hp seeing if I could get it to 12hp lol. Thank you

[@mathewdavis-adventuresandd6643]

I guess that explains the size. I was looking at it and it looked like the same size as my 114 four stroke Yamaha.

[@nikolutkauskas5126]

Yeah I was thinking the same thing for my boat. It’s an inboard outboard 4.3 liter mercruiser alpha 1 drive set up. It’s rated at 175 hp but I was thinking since other 4.3 mercruisers can get up to 220 hp that we may be able to do something similar with the carbs. The engine is literally almost identical to the 220hps ones as well. The engine is in a mint 1989 wellcraft eclipse 186. Idk if it’s possible on inboards like that might take a look into it.

[@fryreartechnology7611]

@@nikolutkauskas5126 sounds do-able to me. Might even be able to 'eBay' turbo it too it there is enough room for the water to water intercooler, turbo, all that good stuff. The 4.3L block has the same mounts and bolt pattern as a 5.0/5.7L (305/350ci) V8. I had a S-10 truck I swapped a V8 in too and biggest upgrade was the cooling system. Might be worth looking in to a swap that make more power with the same fuel since it is like $4 per gallon on the water where I live. That's a really nice boat you have too.

[@jonalirez6710]

I rebuilt a 1973 Lund with a 115hp Johnson outboard a few years back. Learned a LOT from Dangar Marine here on KZbin. His outboard videos and general boat maintenance and modification are very informative. He lives on an island and they all use boats to commute. Hope this helps! Congrats on the boat and great work!

[@melissabreedlove8211]

The motor looks brand new!!! You have done an amazing job on this project! Can’t wait to see it in the water

[@mathewdavis-adventuresandd6643]

You'll probably love the four stroke engine. Since your dad already had or has a boat, you probably already know the importance in winterizing the engine if it's going to set unused for a while. In my area it's $1K every time those things go into the shop. It didn't take very many trips to the shop and I learn how to fix an engine real quick. Keeping gas in good condition will go a LONG way. I didn't even know you could paint the plastic outboard cover panels and make them look factory. Freaking rocking job on that. I would have been very tempted to have gone white, but I'm different. Water pump on that four stroke looks good and strong.

[@Doug158]

I have a 2004 115 Merc same as a Yamaha I have rebuilt the boat [25ft Bentley pontoon] twice but the same motor and I change the fluids every winter and do a tune up and impeller every 3 years and it is still going strong I would suggest a Batt switch they come in handy Between all the fishing and towing the grandkids around it gets a lot of use

[@marybethclaypool6239]

Man...your sister must be strong to break that piece off 😂!! That little boy in your video is the cutest! ♥️. Great job on your boat!!! Can’t wait to get an invite!

[@jeffatkinson3288]

I got the biggest smile when I saw new motor is a Mercury! Your gonna love that motor!

[@brodyjohnson4725]

yeah my friend owns a marine and that the only motor the put on their boats and work on cause all the others just arnt reliable

[@romancole2671]

Lmfao YALL serious🤣 MERCURY 🤣 Suzuki the only think to role with

[@brodyjohnson4725]

@@romancole2671 yeah cause if you buy a Suzuki you will be rolling cause your engine broke

[@jeffatkinson3288]

@@romancole2671 suzuki's are pieces of shit...I wouldnt use one if given to me for free!

[@meax2499]

Investigate what a SPDT switch is. You can read two different batteries voltages with one gauge. With a DPDT switch you can achieve the same result and run a light to the gauge . Reply if you would like a wiring schematic. Love the boat!! (Single Position Dual Throw) (Dual Position Dual Throw)

[@allviking5203]

Awesome Zak Definitely the right decision 👌 Can't go wrong with Merc, I guided for years and always could depend on them. Going to have a Blast bro.

[@bandwagon240]

Merc and Yamaha ftw.

[@ericneumann8509]

Don't change the color, the blue looks cool.

[@gregsmith4492]

Love your work! It’s first-rate. Your attention to detail is remarkable. I would buy anything you rebuilt sight unseen, your work is that good. I’m a 62 year old mechanic/fabricator and have done pretty much what you did, so I know what it takes. Excellent.

[@just_N_case]

I work for a marine dealer service center and we only do Mercury. Mercury recommends every 2/3years for the water pump depending who you ask. Oil change/lower unit is 100hrs or once a year, whichever comes first. Was the pontoon transom originally rated to be able to hold a 75 hp engine? Your coast guard plate that should be on the original railing should have that plate and it should be moved to the new stuff. You should have looked for Mercury Phantom Black. That’s what Mercury uses.

[@vinamato103]

You gotta do something about that fuel tank. Everything else about the boat looks so intentional and well executed. Maybe some kind of cover with mounts on top to secure a cooler. Or even just a cover that matches the boat.You were right to stay away from the red pinstripe on the motor because it wouldn't match. Now look at that fuel tank... Beautiful job on the boat. It looks amazing! Nicely done!

[@jotareye1838]

the pontoon boat looking very good, amazing project. now we just wait to see it on water

[@evgeni2306]

Awesome boat... barge.....pontoon... or whatever. It's just awesome!

[@seawench555]

Awesome stuff, ok u need to buy a mercury 75hp 4 stroke service kit, u get all u need for a full service, i suggest u do that either before or as soon as it comes in. Im a mechanic and have a 4 stroke 2010 60hp merc and very happy with performance just look after her and you'll be happy. Also get and inline fuel water seperator easy install worth it believe me. Thanks for videos i get a real buzz from them, have fun on ur boat but be safe ok. Xx Aussie Girl

[@bahamasking2063]

What kind of boat you have?

[@seawench555]

@@bahamasking2063 Hi building 28ft pontoon houseboat

[@bahamasking2063]

@@seawench555 Sounds good. You going to live on it?

[@seawench555]

@@bahamasking2063 Yes mate for awhile going to travel around Aussie will send photos when finished if u like.

[@bahamasking2063]

@@seawench555 That sounds like a epic trip and doing it on a pontoon boat. Yes you send photos now of what you done already to my IG- King_of_the_Bahamas

[@anthonygarbers4955]

Future reference/projects... Chain hoist you can attach to the ceiling in the garage. $100 or less at harbor freight. It's how I moved my 1st 350 V8.

[@Formerlywarmer]

Nice to see a guy ur age that can and is willing to go all that on ur own. Nice work kidd !

[@Evan-in4yz]

Id personally recommend attaching the steering linkage to the back hole on the motor. [The bar that goes from the steering cable to motor] It will give you sharper steering.

[@combatwing]

Do a full service top to bottom, If you dont know when it was last done, even if it is running good do it before taking it out anyway. Its cheap to service, expensive to replace.

[@danielcervantes9349]

It’s 4 am and I’ve been watching you’re videos since 8pm! You’re videos are awesome and it’s encouraging me to build on my pontoon 🤟🏽 your Q&A was awesome and should do more! 👍🏽

[@valengreymoon5623]

Regarding in-garage painting, I've seen one KZbinr use the rafters in his garage to mount clear plastic sheeting that can be rolled up or down using ropes. Quick and dirty paint booth.

[@johnboyd6139]

Get a transom saver right away!!! With a motor that heavy, or any motor for that matter, the added weight bouncing around while going down the highway will beat your boat to death.

[@johnlafrance2692]

This pontoons gonna be flyin

[@jenniferlans8687]

HAY THAT NEW MOTOR LOOKS LIKE THE ONE MISSING ON MY BOAT!!!!!!!!!!!! Just Kidding LOL I just love your videos! You admit you don't know every thing , but you dive in and if you make a mistake you learn from it and correct it and keep going! Great lesson for all of us. Don't be afraid to try.

[@ronaldheit196]

You've done an outstanding job rehabbing your Pontoon Boat young man. A pro boat yard would have a hard time topping your work even tho there's a few things you could do to finish it off. You should put nylon washers under your stainless steel engine mounting bolts and and nuts to avoid dissimilar metal corrosion.

[@redknight1322]

As a former outboard mechanic that was an attempt to hide freeze damage both in the head/block and in the lower unit... basically a great boat anchor. I'm just amazed that that piece of junk actually started and ran at all.

[@tylerakel7958]

INCREDIBLE IT IS CRAZY TO SEE WHERE THIS HAS COME FROM

[@edgaraorozco]

I never liked Pontoon boats but after watching all the videos I like them. Great job

[@Pete_R63]

Woohoo! My Ultimate Rebuilds shirts came yesterday!

[@cbmirada]

Really lovin the paint job,you did great on the motor

[@jeremynelson8496]

The pontoon is coming together very nice. Every new piece makes it that much better.

[@jeffreykennedy6584]

Looks great. Looks like you may have painted over the sacrificial anodes on the OB. You'll want to strip the paint off of them or replace them with new ones.

[@Chris.B1111]

Bro, after seeing all the work you did to this, it seems you bought to well used pontoon floats and a frame. How on earth that engine ran is beyond me. That boat was worth aluminum scraps prices, but you turned it into something awesome!

[@cigarjefe]

That Mercury will serve you well for years to come. Good job.

[@jmmustangs3078]

Nice choice on motor and it looks like brand new after the paint job! Can’t wait to see it out on the water. Great job so far

[@ronaldheit196]

I That fin is a skeg and it's main purpose is to act as a sacrificial part of the engine to dissipate corrosion that would eat up the metal on the rest of the metal of the engine. Especially in salt water. In Florida if your taking your toon into salt water you need a salt water rated engine or it won't last very long. You also need to wrap your under deck wiring in flex seal or another salt water rated coating or it won't last long. Even if it's marine rated wiring I'd cover it. Plus put several coats of marine grade clear coat on all metal objects below your deck. The very bottom black area anti-fouling paint. Even if you trailer it it'll save you a lotta money and time if you do all that. It's near impossible to get all the salt off a toon with just a rinse. Even if you use a pressure washer.

[@richardgodwin3671]

I have got to give you props for taking up all that install work. I would never dream of being able to install a motor and paint it! Good job

[@fijiguy08]

Mad respect to your family... You should get them involved for a family project

[@banksmccommons0806]

Haha. My friend has a 250 vmax on his pontoon. Best tubing I’ve ever done!

[@nikolutkauskas5126]

Yeah my friend has a 350 for his 26 ft pontoon on superior and it rips for tubing

[@cadenceandfamily2159]

I know this sounds funny. Take this from years of spiritual experience. It makes my mind explode thinking that dedication to good work like this saves lives, tme and time again! If your not happy with the boat, this makes other people happy because they won't have to buy a new one and they get the same thing! Life is interesting!

[@rhysdbeast5]

Really love how far the project has come . Looks amazing.

[@nickkeppler9184]

This whole process has been absolutely amazing, you’re so talented

[@shanepowell4720]

Great build!! Hope to see it in the water.

[@elvisshakey8867]

paint the motor check spark plugs, check the lower unit for the impeller which sucks the water in

[@aerial_camera_video_imaging]

Well done kid, looks great.

[@JNis1ger]

Looks great! Good job! Can’t wait to see it on the water!

[@clintonharper1145]

Such a big project. Can't wait to see it out on the water!

[@ethanjordan6500]

The blue looks awesome, and I’m ready to see her on the water.

[@agentrobtaylor]

fantastic work dude! You've become an inspiration to young boaters and DIY'ers...

[@GeorgeBonez]

That thing looks incredible! I’m buying my 1st pontoon boat this year. I’ve wanted one my whole life and I’m finally doing it. I love boats and would love to do a restoration but due to health issues I just can’t do the work myself. Age is a bitch! Great job lil bro!

[@chrisgeorge97]

Beautiful paint job on the outboard

[@chrisskelly6408]

"bondo" or epoxy is quite commonly used on the outside of old boat motors as people use in salt and dont flush causing a hole to form in the outer water chamber. same happened to my jetski, so i used some jb weld and its good

[@trevormeek9892]

You need to get the red stripe for any mercury motor! It's not the same without it!

[@dirtroadsailing6418]

A hint that the outboard is junk is when it has a rattle can paint job with runs and a "factory" style graphics package with every other letter facing a different direction.

[@elijahcutting6510]

Your doing great

[@martinrees9756]

Looks great Zac. Nice job

[@csinalabama]

its an old motor. Make sure you sign up for seatow! Motor sounded like a 2 stroke, so just service your lower unit once a year and change the impeller every three.

[@jeremygrillo7157]

My goodness young man. Well done amazing. Making it solar, that's the only improvement I can think. I am a new fan.

[@damien5322]

Would love to see you building something else with the old motor!!!

[@ultimaterebuilds7127]

That motor needed to be put to rest. 😂

[@michaeldixon9002]

Sick ass pontoon boat! I got a ski boat now I want a pontoon now with it lol

[@dextersxxxxlab]

A job well done!! Great paint job

[@COLLAR01]

Very nice job, careful running it without water and change your impellor before you use it next summer.

[@rivergray5202]

I think you should get some new rims and tires for that trailer and it would look so nice

[@semvdwolf9566]

amzing boot, i can wait to see it on the water :)

[@tractormatt4301]

Yamaha actually made Mercury’s first four stroke outboards, so many parts are interchangable between the brands of that era, that motor is also pretty much exactly the same compared to the 90 and 115 hp models.

[@allviking5203]

Excellent paint job Like new

[@capicolaspicy]

@ 18 mins - consider removing the fuel gauge and putting the voltage meter in and adding a 3 position spring centered rocker switch below it to check battery A or B....a thought. Want to go out on your amazing project - will buy gas and food!

[@2003bigsilverado1]

Outboard looks a little low, and don't forget a pontoon will need a completely different prop. Pontoons are harder to push through the water.

[@johnboyd6139]

Right! It could be a problem for sure.

[@alexkorn6036]

With all the light's and speakers you really should have 31 series deep cycle batteries. Boat is looking amazing though

[@stevewaller6577]

As always great work, great production and awesome music, it's both relaxing and inspirational viewing, keep it up!

[@brettwaite5347]

Awesome build series!! What a transformation!

[@jimf5160]

that extra lightness from the carbon (look?) on the wheel and the dash will surely be helpful with that big motor....

[@runvs7470]

Keep an eye on the motor pod for cracked welds.

[@blakerh]

Great job! Looks awesome!

[@markcarlson5869]

You are amazingly talented!

[@mrnhl3080]

You need to have a party on the boat for your viewers

[@rvbernier]

Fantastic job!

[@ricdiamondhandsflair7208]

Lookin’ great! Well done.

[@nolanm6295]

Love this channel

[@dhurt8955]

You have done a fantastic job! Looks great.

[@dianapearson1771]

You've done a fantastic job!!!!

[@robertjean659]

Looks great, well done

[@MK-jp1ey]

You’re awesome bro. Love the whole playlist for this project. Binged it in 2 days lol

[@kidjeff4304]

Nice job. Very happy for you!

[@dman666666666]

Great vid looking forward to next video on the water! Enjoy.

[@lpdzzlfshzzl]

Dope! I’m lovin it. Can’t wait to see it in the water!

[@ethanvenable5870]

You're amazing. Love your videos. I am your biggest fan! Super talented!!!

[@keithsnider8995]

Looks great.

[@conmancollins1176]

thats one good looking motor!

[@MediocreHustler]

Looks great! You are killing it man.

[@joseortiz5965]

That was awesome.

[@tylersanders6080]

Can't wait for the outcome

[@lear60man]

Im 50-50% percent rate failure on the Faria Chesapeak gauges. I bought two sets for my boat and one set was reading low. This was found after spending months of troubleshooting....then I swapped gauges.

[@MrJerobona]

Looking amazing! Another great job!

[@Micahostebo]

Love the roof❤️ 17:50