Unboxing the Kicker Street Series : ST 7, ST 9 and Tweeters

[@scottiffanimccord1509]

I saw someone on Instagram with these in their doors and said I want some, now I see you with them so yea I paused your video went to Kicker and ordered too pair of the 9" it was exactly $500 after tax, I think my email said they would ship out on Thursday. Thx Andy!

[@LivinLoudwithAndy]

That’s so cool to hear man!!! Great to be of help in your purchasing 🙂👊🏼 You’re gonna enjoy these I’m telling ya 🙌🏼 Keep Livin’Loud man 🔊

[@PhiMobileSounds]

I would suggest using the electrolytic capacitor if you are using a DSP, It is some insurance that will make sure that any frequencies that are going to the tweeter driver is within it's performance range. I have them on my Rockford tweeters, no issues, sound great and confident when cranking it up with clean sound.

[@LivinLoudwithAndy]

Wow makes sense I’ve ran the other ones they’ve provided in the past but usually it was the easiest and best option It’s always nice to have that safe cushion 🙂

[@joekennonmagnetizedmindz2233]

Very clean now I got to get my custom on ...hope kicker comes out with a round version

[@LivinLoudwithAndy]

Who knows 😉 Kicker is always listening 👂

[@HifiVega]

I’m not the only one who loves keeping my boxes in pristine condition I see… Although you totally ripped that end 😂

[@LivinLoudwithAndy]

You just gotta!!!!! 🕺 dance I say!

[@Vegas_Baba808]

Whooaaa... Andy stepping up his editing game in the vids. Transition scenes, effects, graphics, fades and FFW zip scenes instead of jump cuts. Awesome. Excited to go see the new wares at SEMA. Looking forward to seeing the Bronco and the other awesome stuff they will have there. Kicker FTW 💪🏽🔥

[@LivinLoudwithAndy]

Thanks Baba😎 Enjoy your time at Sema man ! ❤️🔥

[@mester84]

U know u already have a screwed washer on the tweeters u can use ether one the round whit out mouthing holes round or the square one whit some holes

[@LivinLoudwithAndy]

I noticed that last night actually! Brought it up on my live show tonight 💪🏼👊🏼

[@cin5cin1nat3i]

The tweeters are priced to high for what they cost. For the price of 1 I got 2 dc audio neo tweets and they look exactly the same. Plus they are 2.5k to 20k

[@rickperez1122]

Just did a 2021 single cab ford with custom door panels with square kickers and they are loud and clear !!

[@LivinLoudwithAndy]

That’s awesome!!! Wouldn’t expect less ❤️👊🏼

[@Mexicanracing]

Not sure if answered already but 400.4 ok for these ?

[@mullinperformanceaudio5902]

I have nothing to put these in but I might have to pick up a set.

[@LivinLoudwithAndy]

They’d work as a separate system for some kind of display 👊🏼

[@andrewzevallos4276]

When do the loaded 12 enclosures of these come out?

[@kaimipono8794]

A str8 kicker chanel i have been missing out!

[@LivinLoudwithAndy]

We Stay Livin’Loud here 👊🏼 glad ya found me 🤘🏼

[@VALAREZ]

how powerful should a sub be before considering this kind of thing? I run a l712Q on 1k rms and I can still hear the music clearly through the stock speakers even when the sup is at it's loudest which is fairly loud to my ear. Though I do plan to swap to a solo x in the future and run at least 3k to that...........

[@oceano_drive241]

I need your help. I have a 2019 RAM 1500 with the Alpine speaker package. I did not want to replace the factory speakers, but did think of replacing the factory amp with a Kicker CX360.4 4-Channel Amplifier for sound and loudness. I added a Skar down fire RAM sealed enclosure, with dual Kicker Comp R 4 Ohm, Kicker CX 1200.1. Good bass inside, but it is not loud. I see everyone with the DS18 6.5, or Skar 6.5 speakers, with Horns and they are loud. I wanted to stay with all Kicker. What do you think would be louder? Dual Kicker ST ST7MR8 Midrange 8 Ohm with Kicker ST4TW 1.5" Tweeter 4 Ohm. Dual Kicker KMS67 4Ω Tower System? Also, I wanted to add these to my enclosure, but facing forward.

[@HifiVega]

You’ll have to let me know how they sound! I know I’ve given them crap, but honestly I’ve given all pro sound drivers crap, but I’m coming around!

[@LivinLoudwithAndy]

I will ! Gonna build a test rig to do a sound demo of them asap 🙌🏼

[@blakebrockhaus347]

long as you send them a square signal it oughta sound good

[@scottiffanimccord1509]

I have the same reservations. The build I'm on now is the first-time running PRO gear, I'm hoping with the right amps/EQ and a "bass knob" for each set of RCA (3) on my 80PRS, I can control the sound of shit that is PRO lol It not I will reluctantly get a DSP looking at the 8 Channel Audio Controle if it is ever back in stock.

[@dwaynethompson1753]

I love those mid bass do they make them in 12 inch

[@LivinLoudwithAndy]

As of now no - but who knows what they have up their sleeves 💪🏼

[@agallo121]

Dude" i thought the tweeter mount comes off.. to use the circle or square

[@LivinLoudwithAndy]

Yes

[@dadygee]

I always have loved how the l7´s look.. but I have never heard them :) but some day :)

[@LivinLoudwithAndy]

Unique for sure 👊🏼❤️

[@robsanchez9270]

Hey Andy I’m currently running sundown SAZ1500D to a single L7X 12 in a custom box I made.. next is a midrange box with 2-9” 2-7” 2- 1.5” Question is what amp would you suggest.. also any power supply upgrades.. 2021 Tahoe

[@LivinLoudwithAndy]

For the ST series or the L7X ? ST series has a 4ch coming out shortly Otherwise I’d load up on CXA 360.4s to properly power them Or D4S has some good amps that are big 4channels like the JP454

[@jamespaullopez9962]

hi, will those be good for ESQL? Planning to join EMMA soon

[@N7-alpha]

Official grills from kicker needed.

[@LivinLoudwithAndy]

Definitely this 💪🏼

[@robertkurtz7587]

Yes but not super difficult to Make , I wouldn’t even doubt some after market company already makes them

[@25hztolife14]

You know what we want: endless vids on them to include your installation.

[@LivinLoudwithAndy]

Can’t get enough of them squares too eh

[@BassDaddy69]

Andy don't install bro... he's a newb

[@DesertRunner602]

Are these 250w RMS per speaker or the pair?

[@ALLSHOTENTERTAINMENT]

Yeah I need these for the next motorcycle build.

[@LivinLoudwithAndy]

That would probably work quite well!

[@ALLSHOTENTERTAINMENT]

@@LivinLoudwithAndy I'm going to have to find out... Need me one of those sponsorships lol...

[@tonytorres8209]

Can I use de kicker iq500.4 for mid and tweeters?

[@LivinLoudwithAndy]

Absolutely!!! These will work in a wide range of power being applied - of course a larger amp could make them a lot louder

[@tonytorres8209]

@@LivinLoudwithAndy ok thank you I order 6 tweets and 4 set mids

[@LivinLoudwithAndy]

@@tonytorres8209 wow sweet dude ! That’s gonna be pretty loud 😳

[@tonytorres8209]

@@LivinLoudwithAndy I have a new old solo x 12 but I’m waitin the new l7x solo x I like the new things

[@kenniswilliams182]

What about the recones? Kicker should consider. .....

[@LivinLoudwithAndy]

Some things will be field serviceable - others .. you’ll have to buy another Price reflects that I believe

[@kenniswilliams182]

@@LivinLoudwithAndy I haven't seen the prices yet, I'm from a tiny island in the caribbean called St.Kitts which means to fully support my love for the brand or any other brand I would pay shipping + an import fee of 65% of the cost of the item. So for me recones make sense. My current build is 1. skv2 100., 2. Skv2 1300.2., and an skv2 2500.1. My mids and highs are prv but my bass are 4 kicker comp vx 10sin a C.A.F designed subwoofer enclosure. Love the channel keep them videos coming.

[@bearxbunny1835]

It's about time we saw something from the "L7X" family, but damn it why would they release these first?!?!?! We all have been waiting for the L7X subwoofer for over two years now and a with that being the case then why wouldn't they focus solely on making that happen first??? I suppose this is good news to a degree, but damn it feels like a slap in the face for all of us LOYAL Kicker fans

[@LivinLoudwithAndy]

I feel you on that but I’m sure they have their reasons .. it’s just a matter of time now .. very soon and trust me it’s worth the wait

[@ericthompson4644]

Lanzar made square mids a while ago.. nice video!

[@LivinLoudwithAndy]

Yes they did ! And Thankyou man!!

[@chaseleim4773]

Home audio tower speaker idea 😆

[@LivinLoudwithAndy]

Oh ya 😉

[@frankuribe6500]

Nice catch Andy. That clock almost met it’s demise😈

[@LivinLoudwithAndy]

Wouldn’t be the first time 😅👊🏼

[@frankuribe6500]

What is this, Spam?

[@LivinLoudwithAndy]

@@frankuribe6500 ya seems like spam just ignore…

[@ericperry72]

I wanna see the 7" in a Harley or Indian lower fairing with some real power behind them.

[@LivinLoudwithAndy]

These would probably do well in open environments!

[@DesertRunner602]

These are really nice, but I'm waiting for the Solo X 12". I can't wait for it

[@LivinLoudwithAndy]

Me too man ! Can’t wait to see the subs 🔊

[@xTinBenderX]

Here are the t/s parameters for the kicker ST series mid-range drivers. ST-Series 9 in 4ohm 49ST9MR4 Specifications: Square Woofers 9, 230 [in, mm] Impedance 4 [Ohms] RMS Power 50-300 [watts RMS] Peak Power 600 [watts] Frequency 80-5.5k [Hz] Sensitivity 94 [1W, 1m] Mounting Depth 3-9/16, 91 [in, mm] Mounting Cutout 7-13/16 x 7-13/16, 199x199 [in, mm] Electrical Parameters: Re 3.60 Ohm electrical voice coil resistance at DC Krm 0.0028 Ohm WRIGHT inductance model Erm 0.68 WRIGHT inductance model Kxm 0.0041 Ohm WRIGHT inductance model Exm 0.74 WRIGHT inductance model Cmes 448.91 µF electrical capacitance representing moving mass Lces 4.56 mH electrical inductance representing driver compliance Res 15.66 Ohm resistance due to mechanical losses fs 111.3 Hz driver resonance frequency Mechanical Parameters: Mms 39.242 g mechanical mass of driver diaphragm assembly including air load and voice coil Mmd (Sd) 31.118 g mechanical mass of voice coil and diaphragm without air load Rms 5.582 kg/s mechanical resistance of total-driver losses Cms 0.052 mm/N mechanical compliance of driver suspension Kms 19.19 N/mm mechanical stiffness of driver suspension Bl 9.350 N/A force factor (Bl product) Lambda s 0.138 suspension creep factor Loss factors: Qtp 0.969 total Q-factor considering all losses Qms 4.916 mechanical Q-factor of driver in free air considering Rms only Qes 1.130 electrical Q-factor of driver in free air considering Re only Qts 0.919 total Q-factor considering Re and Rms only Other Parameters: Vas 10.2331 L equivalent air volume of suspension n0 1.200 % reference efficiency (2 pi-radiation using Re) Lm 92.99 dB characteristic sound pressure level (SPL at 1m for 1W @ Re) Lnom 93.45 dB nominal sensitivity (SPL at 1m for 1W @ Zn) rmse Z 3.69 % root-mean-square fitting error of driver impedance Z(f) rmse Hx 2.46 % root-mean-square fitting error of transfer function Hx (f) Series resistor 0.00 Ohm resistance of series resistor Sd 372.49 cm² diaphragm area ST-Series 9 in 8 ohm 49ST9MR8 Specifications: Square Woofers 9, 230 [in, mm] Impedance 8 [Ohms] RMS Power 50-300 [watts RMS] Peak Power 600 [watts] Frequency 80-5.5k [Hz] Sensitivity 94 [1W, 1m] Mounting Depth 3-9/16, 91 [in, mm] Mounting Cutout 7-13/16 x 7-13/16, 199x199 [in, mm] Electrical Parameters: Re6.18Ohmelectrical voice coil resistance at DC Krm0.0022OhmWRIGHT inductance model Erm0.75WRIGHT inductance model Kxm0.0048OhmWRIGHT inductance model Exm0.76WRIGHT inductance model Cmes302.84µFelectrical capacitance representing moving mass Lces6.88mHelectrical inductance representing driver compliance Res21.62Ohmresistance due to mechanical losses fs110.3Hzdriver resonance frequency Mechanical Parameters: Mms38.839 gmechanical mass of driver diaphragm assembly including air load and voice coil Mmd (Sd)30.715gmechanical mass of voice coil and diaphragm without air load Rms5.932kg/smechanical resistance of total-driver losses Cms0.054mm/Nmechanical compliance of driver suspension Kms18.65N/mmmechanical stiffness of driver suspension Bl11.325N/Aforce factor (Bl product) Lambda s0.102suspension creep factor Loss factors: Qtp1.046total Q-factor considering all losses Qms4.537mechanical Q-factor of driver in free air considering Rms only Qes1.297electrical Q-factor of driver in free air considering Re only Qts1.009total Q-factor considering Re and Rms only Other Parameters: Vas10.5303 Lequivalent air volume of suspension n01.047%reference efficiency (2 pi-radiation using Re) Lm92.40dBcharacteristic sound pressure level (SPL at 1m for 1W @ Re) Lnom93.52dBnominal sensitivity (SPL at 1m for 1W @ Zn) rmse Z4.05%root-mean-square fitting error of driver impedance Z(f) rmse Hx2.64%root-mean-square fitting error of transfer function Hx (f) Series resistor0.00Ohmresistance of series resistor Sd372.49cm²diaphragm area ST-Series 7 in 8 ohm 49ST7MR8 Specifications: Square Woofers 7, 180 [in, mm] Impedance 8 [Ohms] RMS Power 50-250 [watts RMS] Peak Power 500 [watts] Frequency 80-7.5k [Hz] Sensitivity 92 [1W, 1m] Mounting Depth 3-1/16, 78 [in, mm] Mounting Cutout 5-7/8 x 5-7/8, 150x150 [in, mm] Electrical Parameters: Re6.40Ohmelectrical voice coil resistance at DC Krm0.0026OhmWRIGHT inductance model Erm0.72WRIGHT inductance model Kxm0.0032OhmWRIGHT inductance model Exm0.81WRIGHT inductance model Cmes261.27µFelectrical capacitance representing moving mass Lces5.74mHelectrical inductance representing driver compliance Res24.18Ohmresistance due to mechanical losses fs129.9Hzdriver resonance frequency Mechanical Parameters: Mms26.668gmechanical mass of driver diaphragm assembly including air load and voice coil Mmd (Sd)23.293gmechanical mass of voice coil and diaphragm without air load Rms4.222kg/smechanical resistance of total-driver losses Cms0.056mm/Nmechanical compliance of driver suspension Kms17.77N/mmmechanical stiffness of driver suspension Bl10.103N/Aforce factor (Bl product) Lambda s0.144suspension creep factor Loss factors: Qtp1.124total Q-factor considering all losses Qms5.157mechanical Q-factor of driver in free air considering Rms only Qes1.366electrical Q-factor of driver in free air considering Re only Qts1.080total Q-factor considering Re and Rms only Other Parameters: Vas3.4238lequivalent air volume of suspension n00.529%reference efficiency (2 pi-radiation using Re) Lm89.43dBcharacteristic sound pressure level (SPL at 1m for 1W @ Re) Lnom90.40dBnominal sensitivity (SPL at 1m for 1W @ Zn) rmse Z2.52%root-mean-square fitting error of driver impedance Z(f) rmse Hx1.97%root-mean-square fitting error of transfer function Hx (f) Series resistor0.00Ohmresistance of series resistor Sd207.37cm²diaphragm area ST-Series 7 in 4 ohm 49ST7MR4 Specifications: Square Woofers 7, 180 [in, mm] Impedance 4 [Ohms] RMS Power 50-250 [watts RMS] Peak Power 500 [watts] Frequency 80-7.5k [Hz] Sensitivity 92 [1W, 1m] Mounting Depth 3-1/16, 78 [in, mm] Mounting Cutout 5-7/8 x 5-7/8, 150x150 [in, mm] Electrical Parameters: Re3.34Ohmelectrical voice coil resistance at DC Krm0.0018OhmWRIGHT inductance model Erm0.72WRIGHT inductance model Kxm0.0026OhmWRIGHT inductance model Exm0.78WRIGHT inductance model Cmes426.20µFelectrical capacitance representing moving mass Lces3.79mHelectrical inductance representing driver compliance Res15.47Ohmresistance due to mechanical losses fs125.2Hzdriver resonance frequency Mechanical Parameters: Mms26.772gmechanical mass of driver diaphragm assembly including air load and voice coil Mmd (Sd)23.398gmechanical mass of voice coil and diaphragm without air load Rms4.059kg/smechanical resistance of total-driver losses Cms0.060mm/Nmechanical compliance of driver suspension Kms16.57N/mmmechanical stiffness of driver suspension Bl7.926N/Aforce factor (Bl product) Lambda s0.128suspension creep factor Loss factors: Qtp0.970total Q-factor considering all losses Qms5.189mechanical Q-factor of driver in free air considering Rms only Qes1.121electrical Q-factor of driver in free air considering Re only Qts0.922total Q-factor considering Re and Rms only Other Parameters: Vas3.6725lequivalent air volume of suspension n00.618%reference efficiency (2 pi-radiation using Re) Lm90.11dBcharacteristic sound pressure level (SPL at 1m for 1W @ Re) Lnom90.89dBnominal sensitivity (SPL at 1m for 1W @ Zn) rmse Z2.68%root-mean-square fitting error of driver impedance Z(f) rmse Hx2.16%root-mean-square fitting error of transfer function Hx (f) Series resistor0.00Ohmresistance of series resistor Sd207.37cm²diaphragm area Credit coastalcomputerexper on diymobileaudio

[@joecooke899]

Yes plz!!

[@LivinLoudwithAndy]

👊🏼💪🏼❤️

[@Widowmaker2828]

Love the new kicker mids and tweets for sure. Very cool and clean. Can't wait to hear them in your ride if you get around to installing them

[@LivinLoudwithAndy]

These would work great in your build as well man! Gonna need some help on building doors but that’s the goal 👊🏼

[@blakebrockhaus347]

14:11 minute vid filmed and edited in under a day?!?! You madman

[@LivinLoudwithAndy]

Had too…❤️🙌🏼

[@blakebrockhaus347]

Man, those look meaty up close on the vid

[@Vegas_Baba808]

💪🏽🔥

[@ericperry72]

Are these midrange or midbass?

[@LivinLoudwithAndy]

80-5.5k so depends what your opinion is Technically Midrange but some consider mid bass a wider spectrum 👊🏼

[@Mexicanracing]

Make a video of these bumping already 💯

[@chrismcgill4372]

Andy are you guys making the soloX in the 8 inch? Please answer

[@LivinLoudwithAndy]

Cannot confirm nor deny 😉

[@seanellis3921]

How much are those subs ???

[@LivinLoudwithAndy]

L7X or these mid range?

[@Hellocopandy]

Yeah andy keep it going

[@LivinLoudwithAndy]

Thanks bro 👊🏼❤️

[@equanox100]

How much do they pay you?

[@LivinLoudwithAndy]

My supporters from my channel made this possible 👊🏼❤️

[@boominS10]

Definitely not kickers 1st mid bass driver, unless you're talking in the pro audio area. They were building them way back in the 80s/90s

[@LivinLoudwithAndy]

Very true - these are more so PA mid bass/mid range .. something I’ve never seen them make and definitely not something they currently made until now

[@boominS10]

@@LivinLoudwithAndy as far back as I can remember , back to the late 80s - I'm old lol, I've never known them to make any pro audio either.

[@davidkoslek9372]

Just wow. They are absolutely beautiful

[@LivinLoudwithAndy]

💯 B-E-A-utiful !

[@bobbybyrkett7751]

Kicker FTW

[@LivinLoudwithAndy]

❤️🔥🔥🔥

[@famousmoon]

Solo x still no release 😢

[@LivinLoudwithAndy]

Sooooooooooooon! And more goodies too😉

[@josegiraldez6230]

Yeeeaaa man... Siicck🤟🤟🤟🤟

[@LivinLoudwithAndy]

💪🏼💪🏼💪🏼👊🏼 thanks man

[@damemoe29]

It kinda reminds me of a better version of the Hifonics HF8SQ

[@LivinLoudwithAndy]

Yes 🙌🏼

[@enzofiero2924]

I could swear you said, 7.5 thousand crossover point. I'm confused 🤔

[@LivinLoudwithAndy]

Just the playable range of the 7” 80-7.5k hz

[@rickross7561]

Brand jockey?

[@LivinLoudwithAndy]

Practically employee ...Just a Fan in Reality ❤👍

[@tuama605]

Hey would sale your kickers solo x behind you

[@LivinLoudwithAndy]

Those are life ❤️ would never sell them unfortunately man 🫤

[@eloyaguirre8017]

You comparing pricing with a sundown speaker that has neo magnet and carbon fiber dust cap?? Really??

[@ST4R1SM1NE]

50rms and 1000peak??? I believe you made a mistake 🤣

[@LivinLoudwithAndy]

I noticed that afterwards 🤣

[@deviant4life25]

that 8 minute mark…. Wow.

[@LivinLoudwithAndy]

🔥

[@lamarleachman9270]

Cheep prest paper cone for light cheep sub's

[@cristovalmontoya5222]

Nice but why kicker so late to the show and damn 600$ for 4 doors with a mid and tweet setup. I run db apocolyse on my doors and though those were kinda expensive. Man scared to see the x subwoofer price. Maybe dealers be a little less but doubt that lol

[@SevereMkII]

issue with these pro audio style drivers is that there's no real mid-bass. I've been in the car audio scene since the late 90s. Been through running walled SUVs with multiple 15s to sound quality competitions. There's currently a pair of 18 inch infinite baffle subs in my car. Since the Pro-audio style drivers have become popular every demo car I sit in sounds like shit. Screaming mids and highs, great bass, but damn near nothing between 80hz or so and like 140hz. This seems like a narrow band to be complaining about but there is a TON of music in that narrow passband

[@xiongxiongloft5937]

Sundown already got those and it only 30 dollar each

[@LivinLoudwithAndy]

Lcmr’s? Which ones are you referring

[@xiongxiongloft5937]

@@LivinLoudwithAndy the tweeters..

[@LivinLoudwithAndy]

@@xiongxiongloft5937 Then run those ! Sundown’s gear is already more geared towards this type of audio Sundown is more known in the bass community compared to the average consumer As any business is - the more you sell a product the cheaper it can be sold for We should just be happy kicker is back in the game 👊🏼

[@xiongxiongloft5937]

Kicker is my favorite growing up as a kid but now a days there better stuff out there and cheaper im waiting for the new kicker to come out but they just keep playing games some I took my money some where els...

[@itdoesntmatterwhatyourname6128]

@@xiongxiongloft5937 sounds like you on a tight budget, so the lil money you took somewhere else wasn't gonna effect Kicker in the least. Lol you mention Sundown 😅

[@johnhildebrand1991]

Man those are sexy speakors i wanna run a few in my truck mines a crazy build n these be a beutiful adition

[@LivinLoudwithAndy]

Quite beautiful speakers … sound great too 🔥

[@eprohoda]

man, unusual , 🤚

[@LivinLoudwithAndy]

👊🏼💪🏼

[@Slaphappy-_-]

My pioneer 4 ways 6x9s always beat kicker mids and high’s!!!

[@itdoesntmatterwhatyourname6128]

Andy Sommer what model Pioneer?

[@Slaphappy-_-]

@@itdoesntmatterwhatyourname6128 I’ve just always used Pioneer for my mids and highs I’ve pulled up to people with other brands and it’s always mine being clearest now subs I’m old school and probably use kicker or JL at the moment I have 2 12” SAS bazookas pre amped! I just like clean sound not a bass head too much!

[@mester84]

100 you say one 1000 i say dam a 1000 watts tweeters lol i know it was a mistake

[@LivinLoudwithAndy]

I mean you could give ‘em 1000😉

[@csj9619]

FAN BOY!

[@LivinLoudwithAndy]

Something like that 👊🏼

[@detonationpyrotechnics4156]

It's cool in all but at the end of the day it's kicker so not much better than entry level equipment with a much more hefty price.

[@Tony2Pockets]

U could have saved the boxes if you opened them the right way

[@krazzykiller1]

you should probably buy some beter speakers.

[@LivinLoudwithAndy]

Hmm 🤔

[@ashtinserri3970]

You mean 100w peak

[@LivinLoudwithAndy]

Yes 😂

[@hookhousebeatz]

thats tasty! lol

[@LivinLoudwithAndy]

Super Tasty 🤣👊🏼

[@Primetimeunko]

Cheeeee #livinloud

[@LivinLoudwithAndy]

❤️🔥👊🏼#Always

[@darrintriplett6265]

Only problem with kicker they over priced for what you get!

[@LivinLoudwithAndy]

Depends what you’re looking for

[@darrintriplett6265]

@@LivinLoudwithAndy Lol I been into car audio since the mid 90s have damn near tried everything. I used to be a kicker fan. But now uou got subs that will blow them out the water. I can damn near build a whole system for what 2 of kickers top subs cost!

[@itdoesntmatterwhatyourname6128]

@@darrintriplett6265 if you can almost do an entire 'build' for the price of "two of Kicker's top subs" then you haven't built much worth speaking about. Tbh I have more in just the wiring of my daily than two of Kicker's top of the line subs. By reading your comment, it's probably fair to say that since the 90s out of all your builds that you've never once bought & installed a sound deadener in any of your car audio builds. Darrin it seems so often that people with your mentality when it comes to a products price, you think everyone is just like you. Here's your sign, not everyone is cheap like you & everyone is not on a budget, or tight with our money. This may be shocking to you BUT there's lots of us who do not automatically look at the price of a product soon as we see it. Plenty of us could really care less how much something is, if we see something & we like it, then we buyin' it. It's that simple! **Here's what you should take from my comment: get an education or learn a trade, then start your own business or pursue a worthwhile career with a company who will value both you & your time. Then you can position yourself into a tax bracket to where a products price is no longer a HUGE concern to you.

[@scamchan]

Just saying there is nothing new here that isn't already in the marketplace. The interesting thing here is that Kicker just wants a slice of that market and this is what they came up with to do it. Imagine the wholesale pricing on these units.

[@minitruckinaintdead7142]

Can't even find them online

[@LivinLoudwithAndy]

Kicker.com - main page just click the picture of them

[@Younghog87]

A 1000watt tweeter… seems fishy

[@LivinLoudwithAndy]

Misspoken

[@LivinLoudwithAndy]

Max ratings aren’t relevant anyways lol

[@scamchan]

No one freaking out over what a box the speaker comes in looks like. I sense this is just an attempt at padding the video.

[@LivinLoudwithAndy]

No that’s me being myself You should tune into a live 👊🏼 Ask me there

[@scamchan]

@@LivinLoudwithAndy I think I can ask something a lot better than that.

[@itdoesntmatterwhatyourname6128]

@@scamchan do you ever say anything positive? You are always bashing or just talking negative in every comment I see of yours. Seen you on several channels & you know what I'm talking about because this isn't the 1st time I've mentioned this to you.

[@scamchan]

@@itdoesntmatterwhatyourname6128 "do you ever say anything positive? " I don't think you know "positive" when you see it. Are you the comment police? Maybe you can find a better hobby that can pay you for your efforts. "You are always bashing or just talking negative in every comment" clearly you don't see EVERY comment. I think I see you being a bit jealous. Let me guess you can't seem to comment any better than this. I am not mad at you for being wrong it won't be your last time either.

[@scamchan]

@@itdoesntmatterwhatyourname6128 "Seen you on several channels & you know what I'm talking about because this isn't the 1st time I've mentioned this to you." You plan to do what about it? Keep watching me you just might learn a thing or two.

[@408SPLKINGS]

Kicker has never been known for SQ or quality... that's why absolutely no one competes with Kicker. Kicker known for setting the standard for inexpensive basic subwoofer ( comps ) but that was over 3 decades ago.. Square subs just a marketing ploy..to be different. So many brands to choose from with much better SQ & or SPL..& less expensive Kicker = OVER PRICED OVER HYPED

[@Americansince1560]

Give one away, for likes and such

[@LivinLoudwithAndy]

That may be a possibility..or maybe a L7X👊🏼

[@Americansince1560]

@@LivinLoudwithAndy that would be most generous and freaking awesome of you. Hope to be one of the lucky

[@josephmuniz9959]

So you showed sundown components and then a shot of sold individually. That is very very misleading. Yes some PA styles are but not the components.

[@LivinLoudwithAndy]

Misleading … Frequency range is quite the same .. Just a reference bud 👊🏼

[@krisandersson7156]

That backgroundmusic is way too loud. Turn it down or turn it off

[@LivinLoudwithAndy]

Too low needs turned up some .. okay if you say so!

[@cbr1thou]

Made in china, wtf what a letdown

[@LivinLoudwithAndy]

Everything is lol

[@cbr1thou]

@@LivinLoudwithAndy not my ssa evil